Hot code replace failed-VM may be inconsistent

Java HotSpot(TM)Server VM(micserver:50021)(may be out of synch)
was unable to replace the running code with the code in the
workspace
Reason:
Hot code replace failed-VM may be inconsistent
i face the following message and the code keep on retain to the old code.
this cause me have the debugging problem

Hi Yzme,
This happens since you save the changes to your code which is being debugged and your debugger session is still ON.
To avoid this close your debugger before making any changes to your code.
Regards,
Shubham

Similar Messages

  • REG : HOT CODE REPLACE FAILED

    Hi,
    I am able to build and deploy and it says deployment is successfull from IDE. But when i tried to write some new code into my application or  debug it,I am getting the error message  saying:
    "Java HotSpot(TM) Server VM{PSC-PC11741:500021](may be out of synch) was unable to replace the running code with the code in the work space.
    Reason:
    Hot code replace failed - VM may be inconsistent
    Anybody has faced this problem?
    Please let me know if you have faced this problem.
    Regards,
    Anu

    Synched and Rebuild it .Created a new activity after reverting back the tasks done before.

  • Hot Code replace failed- VM inconsistent

    When i am trying to deploy the application on WAS through NWDS, it is throwing Hot Code replace failed- VM inconsistent.
    Please give your input.
    thanks,

    Hi,
    > It ask me for SDM password, than it throws the error out.
    I do not really understand why the SDM password should be checked for debugging...
    (Double-)Check the WD-Debugging infos here: http://help.sap.com/saphelp_nw04/helpdata/en/cc/9cb34d9d11f74c98644df2b96b90f1/frameset.htm
    And check for standard HotCodeReplacement issues this for example: NetWeaver Portal Debugging - 2, HotSwap your classes
    Maybe putting this question within the WD forum could bring out more...
    Hope it helps
    Detlev

  • Hot code replace failed - Delete method not implemented

    I debug my Java application with Eclipse (3.1). When I change my code during debugging, I get the following error message:
    ...MyApp at localhost:4540 (may be out of synch) was unable to replace the running code with the code in the workspace.
    Reason:
    Hot code replace failed - Delete method not implemented
    What does that mean and how can I fix this?

    This means you changed a class while it was debugging an application and it could not update the class for the application while it was running.
    The error suggests you may be running an older JVM, i.e. pre-1.4.2 but this error can occur with any JVM if the change is incompatible with the previous version of the class.
    The hot replace often does not work for non trivial changes to code.

  • Hot Code Replace Problem...

    Hi Everyone,
    I am using WebLogic 10 with Eclipse. Whenever i start the server in debug mode and make two three changes in the code... WHAM.... I get the Hot Code Replace error. Is there any way so that the server can keep up with the code changes. Publishing the app again takes approx 40 mins!

    Almost always this is a limitation of the JRE/JDK you are using and really
    nothing to do with Eclipse.
    Try a different VM and see if you have better luck
    HTH
    Darins
    "bobz" <[email protected]> wrote in message
    news:75257188f239cb376da31e19b214d2d9$[email protected]..
    > hi buddies,
    >
    > i am getting "hot code replace" problem whenever i change my
    > java code and build the project and access the website without re-starting
    > the server. so, finally i endup with re-starting the server whenever i
    > change the code. this consumes a lot of time. is there any possibility to
    > work without re-starting the server even after the code change.
    >
    > regards,
    > satish.

  • Hot code replacement

    How do I do hot code replacement in Eclipse? I tried to write another line while debugging the code, but I got the warning message about the obsolete methods in stack.

    I didn't write a new method to replace a method.
    Suppose that I have set a breakpoint at
    System.out..println("hi"), debug it, and then change
    the number 2 to 3 and save it, then I want this code
    to work well. It did show a pop up dialog explaining
    about obsolete methods.
    What does it mean?
         public void testSomething() {
              System.out.println("hi");If you set a breakpoint here. This method was on stack and when you
    did hot code replacement and this method "testSomething" becomes
    obsolete method. And it will not execute the new modified statement.
    To make the new replaced code to execute you should pop this
    frame and continue. Or set a breakpoint at line before entering
    this method and then do hot code replacement.
              System.out.println("2");
    Thanks.

  • Hot code replacement for local application?

    i got hot code replacement working during debugging a removet web application (servlet). however, it doesn't work if i debug a simple (local) application. is there something i forgot to setup? (i'm using Eclipse)

    This is an eclipse specific question. It is up to Eclipse to do the code replacement.
    Have you tried 3.0-M8 ?

  • Websphere setting for Hot code replace

    hi ,
    these days i need to build my code everytime i make changes ...
    previously it was working well ......
    i went thru some changes in env .....as there were new addition of MDBs etc in my projects .....
    i m using WSAD 5.1.2 .......
    i have checked the option we get on server for hot code replace feature ...
    is there any other thing i can try ???

    -Xj9

  • Hotswap und Hot Code Replacement

    I start a Java application which has a certain classpath in the start parameter -cp.
    If a certain class has been loaded by that application, I cannot hotswap it. Why not? It seems that Java caches that class and uses it all the time, no matter if I replace it.
    The only way for me is to stop the application and to start it again. But since it is a big application, this takes too much time. So I wanted hotswap for Java class files.
    I don't need it for debugging. Just for normal development with Java 1.4.2.
    Any idea how to solve it?

    Another, more usually used, way to reload classes is using a custom classloader. I'd probably try to use a custom classloader rather than HotSwap if possible. I'm a bit unsure about using a debugging interface for doing production stuff. At least I'd first google to try to find success stories or examples of using HotSwap for that. Maybe I'm just a traditionalist scared of the new and unknown...
    To reload classes loaded by a custom classloader, simply discard the classloader (stop having a pointer to it) and create a new classloader object. Google for "custom classloader" to find examples.

  • [Load data from excel file [1]] Error: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error messa

    Error
    [Load data from excel file [1]] Error: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER.  The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009.  There
    may be error message
    I am using BIDS Microsoft Visual Studio 2008 and running the package to load the data from excel .
    My machine has 32 bit excel hence have set property to RUN64BITRUNTIME AS FALSE.
    But the error still occurs .
    I checked on Google and  many have used Delay validation property at Data flow task level to true but even using it at both excel connection manager and DFT level it doesnt work
    Mudassar

    Thats my connection string
    Provider=Microsoft.ACE.OLEDB.12.0;Data Source=E:\SrcData\Feeds\Utilization.xlsx;Extended Properties="Excel 12.0;HDR=NO";
    Excel 2010 installed and its 32 bit edition
    Are you referring to install this component -AccessDatabaseEngine_x64.exe?
    http://www.microsoft.com/en-us/download/details.aspx?id=13255
    Mudassar
    You can try an OLEDB provider in that case
    see
    http://dataintegrity.wordpress.com/2009/10/16/xlsx/
    you might need to download and install ms access redistributable
    http://www.microsoft.com/en-in/download/details.aspx?id=13255
    Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

  • MC container causes this code to fail...why ?

    Hi
    Flash CS5 as3
    We have settlements named with suffix _Level2 such as e.g. Mitre'sGate_Level2 as well as _Level3 as MovieClips that are in a container MovieClip called Map_Collection.
    The code below fails with the error shown if the code line shown in bold is used, it works with:-
    var clipName :String = String(e.item[s]).replace(r,"")+currentLevel;             if the settlements are placed directly on stage.
    The code identifies _Level2 or Level3 at end of button name e.g. DistrictA_Level2 and appends it to the dataGrid output on the MouseHover.
    What should the code read to resolve this problem that we have poured heart and soul into for 2 hours ?
    Error is:-
    Map_Collection.Mitre'sGate_Level2
    TypeError: Error #1010: A term is undefined and has no properties.
    at BusMap_fla::MainTimeline/ShowSymbols()
    at flash.events::EventDispatcher/dispatchEventFunction()
    at flash.events::EventDispatcher/dispatchEvent()
    at fl.controls::SelectableList/handleCellRendererMouseEvent()
    at fl.controls::DataGrid/handleCellRendererMouseEvent()
    Code is:-
    dg.addEventListener(ListEvent.ITEM_ROLL_OVER,ShowSymbols);
    function ShowSymbols(e:ListEvent):void{
    makeAllVisibleF(false);
    var r:RegExp = /\W/g;
    for(var s:String in e.item){
    //trace(currentLevel)
    if(e.item[s]){
    var clipName :String = String(e.item[s]).replace(r,"")+currentLevel;
    trace(clipName)
    this[clipName].visible=true;
    trace(s,e.item[s])
    function makeAllVisibleF(b:Boolean):void{
    Mitre'sGate_Level2.visible=b;
    UpperDowning_Level2.visible=b
    //Map_Collection.Tamar Brook_Level3.visible=b;
    Map_Collection.Mitre'sGate_Level2.visible=b;
    This code works on sttmnts directly on stage.
    I show here an extract of the code visible=b; that follows it. we have such for every sttmnt. The first two lines are for those not in the MC container.
    if we use:-
    var clipName :String = "Map_Collection."+String(e.item[s]).replace(r,"")+currentLevel;
    which is our best stab after trying various options, it fails with error above.
    My compatriot says, in code !!!  
    // This is what we want
    Map_Collection.Mitre'sGate_Level2.visible=true
    //This doesn’t work
    Map_Collection.this[clipName].visible=true
    //This works, when Mitre'sGate_Level2 is placed on the stage
    Mitre'sGate_Level2.visible=true
    //Placing Mitre'sGate_Level2 in movie clip Map_Collection How do we get it to work
    We tried a variety of  options, even replacing 'this' with Map_Collection.., my best stab,  just what should the code be ?
    Envirographics

    Hi,
    Not sure of that, (also now have edited csv to no gaps or apostrphes, still it fails) ...because the code I posted is the code we are successfully running in a test file where there is a dataGrid fed a csv with such as Mitre's Gate Collet's Reach etc.  This code removes the  apostrophes and gaps when user hovers datagrid, MC's spelt MitresGate etc are identified and appear, then hide again when another row is hovered. Note also as said, Mitre's Gate outside of MC Map_Collection is found and shows.
    The code in this test file (which is 3 columns) is:-
    import flash.net.URLLoader;
    import flash.events.Event;
    import flash.net.URLRequest;
    import fl.data.DataProvider;
    import fl.controls.DataGrid;
    import fl.events.ListEvent
    makeAllVisibleF(false);
    var urlLoader:URLLoader = new URLLoader();
    urlLoader.addEventListener(Event.COMPLETE,completeF);
    urlLoader.load(new URLRequest("NamesWithNullCellsGapsApostrophes.csv"));
    var dg:DataGrid
    function completeF(e:Event):void{
        var dataS:String = e.target.data;
        var dataA:Array = dataS.split("\n").join("").split("\r");
        var dpA:Array = [];
        var itemA:Array;
    var r:RegExp = /\W/g;
        for(var i:int=0;i<dataA.length;i++){
            itemA = dataA[i].split(",");
             dpA.push({"col1":itemA[0],"col2":itemA[1],"col3":itemA[2]});
    var dp:DataProvider = new DataProvider(dpA);
        dg.columns = ["col1","col2","col3"]
        dg.dataProvider = dp;
    dg.addEventListener(ListEvent.ITEM_ROLL_OVER,ShowSymbols);
    function ShowSymbols(e:ListEvent):void{
    makeAllVisibleF(false);
    var r:RegExp = /\W/g;
    for(var s:String in e.item){
    if(e.item[s]){
    var clipName :String = String(e.item[s]).replace(r,"");
    this[clipName].visible=true;
    trace(s,e.item[s])
    function makeAllVisibleF(b:Boolean):void{
    We have introduced to that the code by Kglad, or so we hope, that appends to the output from OnHover  _Level2 or _Level3 depending on which District button is clicked on, DistrictA_Level2 or DistrictA_Level3.
    Just to recap/describe what we are aiming at, a map has 6 districts, user clicks District A button named in instance DistrictA_Level 2and is taken to that District, a dataGrid appears and when user hovers a row, the settlements for that layer of the map, e.g. Mitre's Gate_Layer2  appear. csv just has Mitre's Gate. user clicks on DistrictA_Level3 button and hover will show Mitre's Gate_L
     evel3 symbol. 
    Kglad code:-
    var currentLevel:String="_Level2";
    dg.addEventListener(ListEvent.ITEM_ROLL_OVER,ShowSymbols);
    function ShowSymbols(e:ListEvent):void{
    makeAllVisibleF(false);
    var r:RegExp = /\W/g;
    for(var s:String in e.item){
    if(e.item[s]){
    var clipName :String = String(e.item[s]).replace(r,"")+currentLevel;
    this[clipName].visible=true;
    trace(s,e.item[s])
    and when asked how one gets the Level2 into that var when user clicks on e.g. DistrictA_Level2
    we now have, for the 12 buttons we have named, reply from Kglad
     :-• DistrictA_Level2.addEventListener(MouseEvent.CLICK, clickF);
    DistrictB_Level2.addEventListener(MouseEvent.CLICK, clickF);
    DistrictF_Level2.addEventListener(MouseEvent.CLICK, clickF);
    DistrictA_Level3.addEventListener(MouseEvent.CLICK, clickF);
    DistrictB_Level3.addEventListener(MouseEvent.CLICK, clickF);
    DistrictF_Level3.addEventListener(MouseEvent.CLICK, clickF);
    var currentLevel:String;
    function clickF(e:MouseEvent):void{
    currentLevel="_"+e.currentTarnget.name.split("_")[1];
    for the moment we are focusing on getting it operational on just button DistrictA_Level2
    As said works fine if MC Mitre's Gate sits on stage, so the apostrophy and gap stripping is working as is the appending of the wording after and including the _ from the District button !  Place the settlement MC into Map_Collection MC and it fails.
    Envirographics

  • Hot Backups are Failing

    I am running Oracle 7.3.4.4 on Compaq Tru64 and Digital Unix 4.0F. Our hot backups are failing with the following errors:
    1)from $OBK_HOME/bin/backup_PROD.log
    EBU-3135: SQL error during:
    select state from obk_bfs where bfsid = :objid and jobid = :jobid
    with error:
    ORA-03113: end-of-file on communication channel
    on 20-AUG-02 01:59 [ 29701 : brsupiopn ]
    EBU-3135: SQL error during:
    select state from obk_bfs where bfsid = :objid and jobid = :jobid
    with error:
    ORA-01041: internal error. hostdef extension doesn't exist
    on 20-AUG-02 01:59 [ 29701 : brsupiclo ]
    2)from brd.log:
    Instance Manager (BRD) with pid=32158 successfully started on 20-AUG-02 00:59
    EBU-3135: SQL error during:
    /* Obtain all jobs that are currently running s[0] */ ...
    with error:
    ORA-03113: end-of-file on communication channel
    on 20-AUG-02 01:59 [ 32158 : brsupiopn ]
    EBU-3108: Query error reported from Catalog Database
    on 20-AUG-02 01:59 [ 32158 : brdlookjobs ]
    EBU-1504: Error while retrieving active jobs from Catalog Database
    on 20-AUG-02 01:59 [ 32158 : brdlookjobs ]
    We are running Oracle7 Enterprise Backup Utility: Release 2.2.0.6.0. I have tried to reboot both target and catalog databases and machines and still no luck. Anybody have any ideas as to what may be wrong?
    Thanks,
    Bea Cary
    Database Administrator

    I am running Oracle 7.3.4.4 on Compaq Tru64 and Digital Unix 4.0F. Our hot backups are failing with the following errors:
    1)from $OBK_HOME/bin/backup_PROD.log
    EBU-3135: SQL error during:
    select state from obk_bfs where bfsid = :objid and jobid = :jobid
    with error:
    ORA-03113: end-of-file on communication channel
    on 20-AUG-02 01:59 [ 29701 : brsupiopn ]
    EBU-3135: SQL error during:
    select state from obk_bfs where bfsid = :objid and jobid = :jobid
    with error:
    ORA-01041: internal error. hostdef extension doesn't exist
    on 20-AUG-02 01:59 [ 29701 : brsupiclo ]
    2)from brd.log:
    Instance Manager (BRD) with pid=32158 successfully started on 20-AUG-02 00:59
    EBU-3135: SQL error during:
    /* Obtain all jobs that are currently running s[0] */ ...
    with error:
    ORA-03113: end-of-file on communication channel
    on 20-AUG-02 01:59 [ 32158 : brsupiopn ]
    EBU-3108: Query error reported from Catalog Database
    on 20-AUG-02 01:59 [ 32158 : brdlookjobs ]
    EBU-1504: Error while retrieving active jobs from Catalog Database
    on 20-AUG-02 01:59 [ 32158 : brdlookjobs ]
    We are running Oracle7 Enterprise Backup Utility: Release 2.2.0.6.0. I have tried to reboot both target and catalog databases and machines and still no luck. Anybody have any ideas as to what may be wrong?
    Thanks,
    Bea Cary
    Database Administrator

  • Encore CS5.5: Error Code 19 Failed to Open MUI File for Time Line when making BR ISO

    Encore CS5.5: Error Code 19 Failed to Open MUI File for Time Line.  What is this and how do I correct it.  This happens whenmaking a Blu ray ISO with Menu or no menu created
    Using: I7 Windows7  machine with Production Premium CS5.5
    I get this wether I create a menu or no menu. I have tried several times with it. I do not know what the error is or how to correct it.
    I encoded with no errors in Premiere.
    I get this jsut after Encore starts to transcode the files.
    Please help,
    Steve

    Go back to http://forums.adobe.com/community/encore and enter
    Error Code 19
    in the area just under Ask a Question
    You may now read all the previous discussions of your error... be sure to click the See More Results at the bottom of the initial, short list if the initial list does not answer your question

  • How can I use a SCH-LC11 device in CHINA which bought from ebay. I am not Verizon customer but I prefer to using your 4G LTE Router . How can I get the unlock code? The device may have a bad ESN but I only use it in CHINA. Kindly looking forward your repl

    How can I use a SCH-LC11 device in CHINA which bought from ebay. I am not Verizon customer but I prefer to using your 4G LTE Router . How can I get the unlock code? The device may have a bad ESN but I only use it in CHINA. Kindly looking forward your reply. Thanks!

    It's good to read Antoniad's post.  It reassures me that I can use my new iPad as an international communication device which is the reason I purchased the thing.  However, I called Verizon today (my provider of cellular data) who told me that I can't just pop in a SIM card as you suggested.  He also said that he was from the "Pre-Pay" division of Verizon and he was certain that I couldn't do what I planned to do.  I was extremely disappointed as I had called Apple prior to buying the iPad and I read the algorhythm on the website for choosing an iPad before purchasing.  Those sources were quite specific and the information seemed clear.  I would be able to use my iPad to communicate through cellular connections while traveling on the road, literally, abroad.  I was told that I could pop in a data card wherever I was, just as you indicated in your message above, and voila I was good to go.  The Verizon rep definitively rained on that parade, but said that I might be able to do this if I have a "Post-Pay" account, a different area of Verizon.  I haven't had the chance to talk to this division yet, so I looked to Apple's Support for answers.  Maybe I will find out that I can use my iPad as an international communication device while traveling on the road afterall, however, it appears I may need a different type of account (Post-Pay), something I was never warned about. Can I switch to this kind of account?  I don't know.  I have to find out.  If you have any information about this issue, it would be good to share since I strongly suspect there are others who bought the iPad for the same purpose that I have.

  • The system cannot find the path specified.---- Error code:-2147467259 Error code name:failed

    Friends,
                I'm facing below issue while accessing a crystal report. I heard it might be an access issue. But i'm able to access a report within a same folder.
    com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException : The system cannot find the path specified.---- Error code:-2147467259 Error code name:failed
    at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(Unknown Source)
    at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(Unknown Source)
    Any suggestions would be very helpful.
    Thanks in Advance,
    Bharath

    Apply trace on RAS and look for errors in the RAS logs at the same timestamp.
    These errors come for various errors and tracing RAS would give us a better idea.
    It might hapen that you observe these errors for reports which takes more than the RAS timeout to export the reports.
    Post getting the RAS logs you can try below steps if we see timeout errors in RAS logs.
    Copy clientSDKOptions.xml file from <BO install path>\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\java\lib to the machine where your app is running Open clientSDKOptions.xml and change CORBARequestTimeOut from 600000 to a value large enough to allow the report to render, for instance 1200000. Default value is 600000 (10 minutes)
    Specify the location of the clientSDKOptions.xml file at run-time. In your JSP or Java files, use the Java method setProperty from the System class. Set the system property indicated by the ras.config key to the specified directory as: system.setProperty("ras.config","c:\temp"). This function call specifies that the clientSDKOptions.xml file in c:\temp is to be used for locating RAS servers.
    Thanks,
    Prithvi

Maybe you are looking for