Hot Corners do not work on second (extended) display
Hi all!
I'm using a 24" ASUS display to extend my MB's screen, when using it at home.
After upgrading to Snow Leopard, the hot corners still work with/on my MB's screen, but no longer with/on my ASUS-screen.
After defining the hot corners in the system preferences, everything works well, even with the second screen, but when I shut the MB down, and start it again on the next day, the hot corners only work with the MB-screen, and no longer with my ASUS-screen.
Sorry for my bad english, but I hope you understood my problem so that anyone might be able to help me, or at least share the experience...
Thanks!
No ideas?
Similar Messages
-
Hot corners do not work. Is there a plist that can be deleted to rectify this?
Is there a plist that can be deleted for hot corners? I cannot get them to work at all. Thanks for any help.
"The easiest way to get the hot corners temporarily working again is to launch the Terminal.app and type "killall Dock" in." quoting Michaël Betsch
I tried this but it still doesnt work. Just to clarify, i'm using a MacBook Pro MAC OS X v10.7.2 Lion.
I even tried changing the hot corners and changing it back. But all the 4 corners still doesn work.
I encounted this several times already. I tried rebooting my mac and it worked after startup.
Is there a better solution to it besides rebooting my laptop? -
My Hot Spot does not work after update to 6.0.1. Any suggestions?
Ok, I had the same issue, my phone is unlocked(iphone 5 with 6.1.3). So I went to the apple store and had it replaced. it worked good for a day and started doing the same thing. When the apple tech replaced my phone, he transfered my screen protector to the new one.
so I thought it was my sim card, I put in my sisters sim card from a different carrier and it did the same, so then I was like let me take off the screen protector, and that was it.
so guys, if you have a screen protector on your phone and it's doing "low signal", "No Service", "Searching", "Full bars cycle" then take off the screen protector. so far my phone is working normal. -
In 5s, personal hot spot does not work from time to time. Not detected
In 5s, personal hot spot does not work from time to time. Iphone does not get detected on Wi-fi or bluetooth. Restarting or rebooting does not help.
Settings, general, reset and reset network settings. Clear out your network settings and set personal hotspot again.
also avoid special characters making a password. hashtags or open brackets for example doesn't work too good. -
My hot corners suddenly stopped working. settings are correct. os 10.6.8
my hot corners suddenly stopped working. settings are correct. os 10.6.8
Here are the specificatons required for ML.
Full specifications for ML features are here. -
while updating my ipad to new software through itunes it got stuck and does not work anymore - it just displays the screen with symbols of itunes and the cable to connect to it - help - what should i do?
Disconnect the iPad, do a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. The screen will go blank and then power ON again in the normal way.] It is 'appsolutely' safe!, reconnect and follow the prompts.
If that does not work then see here http://support.apple.com/kb/HT1808 -
My Apple TV is not working. On tv display, I'm getting a message 'unsupported signal. Check your device output. ' Can anyone help plz.
connect it to a tv which support full hd and go into the settings and lower the resolution as much as possible and then connect it with your tv once more
-
Videos (eg, YouTube, New York Times) do not work on my Retina Display MacBook Pro. There is sound but only empty space where the video should be. Help?
Did you install Flash Player?
http://get.adobe.com/flashplayer/ -
27" iMac (refurb, June 2011) not working as an external display for my MacBook Pro.
I just got a 27" iMac (refurb, June 2011) and it's not working as an external display for my MacBook Pro (not Thunderbolt). Any idea why? Command+F2 does nothing. I am connecting via Belkin Minidisplay Port-to-Minidisplay Port adapter.
Any help is appreciated...thanks!Currently the ThunderBolt iMacs can only be used as an external display by other ThunderBolt Macs.
http://docs.info.apple.com/article.html?path=Thunderbolt/10.6/en/30822.html
Apple is very clear about that.
2009 and 2010 27" iMac with a Mini DisplayPort can be used by other Macs with a MDP-to-MDP cable.
Stefan -
HI,
Have 10.10.3 imac version- email system does not work at all it display emails up to the installation of the new version, no incoming or outgoing emailsThat helped thanks-
I was able to solve this by deleting all "Envelop Index*"- and "ExternalUpdates*"-files in ~/Library/Mail/v2/MailData. After that I restarted Mail and let it reindex all mailboxes. -
My sound or camera are not working on my Cinema Display since upgrade to Yosemite
My sound or camera are not working on my Cinema display since Yosemite clean upgrade. Running Mac Mini running 1010.1 Yosemite Late 2009 model with Intel 2.53Ghz Core 2 Duo with 4 Gig of memory Apple LED Cinema Display 27 Inch with NVIDIA GeForce 9400 256 MB graphics.
Could anybody help?
No Option to pick on Sound, photo booth saying no camera connected.Fixed. Cleaned out the USB connector and all seemed fine.
-
hello,
I have 2 lab tops.. and have family members that use them.. I used to have FB open with mult family members accounts. Ad of today you updated to firefox 15..
Now when I go to use multifox 1.3.3 ( that is so you can have mult accounts open. ) .. if trying to go into Fb none of the features work. now since I have upgrade. it use to work fine.
So, the new FF does not work would like to unistall and go back to the old FF.. where I, can have mult accounts open at the same time and have the funcation work when your on the mult account in FB... Like talk to some one in FB chat. or just look at other items in the accounts.
if you can tell me how to fix this or can you please give me the old link back.. or tell me how to get the old link back instead of 15.. Because 15 does not work.
ThanksInstall or Reinstall OS X from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the
left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
the Security button and set the Zero Data option to one-pass. Click on
the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless. -
Hot Corners don't work/Click and drug doesn't work
Hi, I have two computers, iMac 2008 desktop (OS X 10.9.4 ) and Mac air book. Recently about 3 weeks ago. Both of them started having issues. When i will navigate in any corners they would not work (neither Screen Saver, nor All Applications) none of the hot corners that I set up work. However, at times they would work but really slow and my computer kind of like logging (getting supper slow) Another thing happened to both computers: When I click and drug any file from one folder to another it just would not do. the file I click would get hi lighted stick to my mouse pointer and the computer would just freeze. However, when I do copy and paste a file it works. I upgraded to Yosemite and even that did not help. I reinstalled OS X from my old time machine back to OS X 10.9.4 and the problem still persist. Is this disease a nation wide ???
Please help....
did anyone else had something ???Please post the EtreCheck output
<https://discussions.apple.com/docs/DOC-6174> -
Hot Corners do not seem to put Mac to sleep or activate screen saver
All was been working fine and as expected on my Macbook until the 10.6.2 update. I have left hot corner set as screen saver, and right hot corner set to sleep the display. When I go to the hot corners, sleep or screen saver is activated, but then I walk away and a few minutes later the screen comes on again...
At first I thought this was just my macbook (nothing was running but email and no external devices attached), but then It started doing this to my MacPro after the last update...exact same thing.. Then it started happening to my work iMac, then my daughters iMac and now my sons iMac. The only machine that doesn't seem to be effected is my wifes MacMini - and she is still running 10.6.1.
Does anyone know if there is an update somewhere, or how to fix this issue?
thanksI would not regard myself as expert and you are going to get opinions for both approaches. I have just passed on a 3 year-old MacBook Pro that has never been off, apart from updating when restarts are required. Similarly, my iMac sleeps (protected by UPS) and is not turned off. I am happy this way.
I would take slight exception to your process, however. In my opinion, I put the MacBook Pro to sleep by using OptionCommandDelete (or the Apple menu) and wait until the power light pulses before closing the lid. -
Dock hiding and hot corners no longer work
I am not sure exactly when it began, but for the past 2-4 weeks, my hot corners and dock hiding have been very erratic. At seemingly random times, all the sudden my hot corners stop being active, so when I move my pointer to the corner, the designated task whether it be dashboard, Expose, screen saver, etc. as selected in preferences no longer activates. Dock hiding stops working as well. The dock hides, but when I move my cursor over where the dock is parked it doesn't appear, it stays hidden. I can click command alt d and the dock will appear or disappear, but will not appear by just moving the cursor to the side of the screen where the dock is parked. I have not added any new software lately other than Apple OS 10.6.4 and whatever Safari, iTunes etc updates that keep coming at along at pretty regular intervals. Interestingly I have an iMac at work and at home, and they both are misbehaving in the same way. They are similarly populated with software, although not exactly. When I update one, I update the other. Both started misbehaving at about the same time.
I have rebooted- sometimes works, sometimes not. I have trashed the dock and finder plist- works for awhile, but problem always returns. I have reset the PRAM- works for awhile, but problem always returns.
Any thoughts. I like being able to hide the dock to gain that extra bit of screen space, although the command alt d, is an adequate if not ideal work around. But I really like the hot corners, and I do not know of a work around for that problem.The university requires all computers to have anti-virus software and recently switched to Sophos from Symantec, in July I believe. That was a new software install. Since it just works in the background and I never actually access it, I had forgotten about that. I hope that is not the problem, as I am required to have antivirus software.
And no I have not created a new user to log in. It is erratic enough that I don't know how long would have to be on to see if the problem recreated itself. Sometimes it seems like just minutes after I start the computer up and sometimes hours. Right now it is still working since starting this morning.
Maybe you are looking for
-
I have tried to restore my iPhone but when it has gone through all the restore I get the -1 error message and now my phone will not work at all, how do I rectify this please.
-
Customer/Vendor Marked for deletion
Hi All i have some customers and vendors who have been zero'd out and the deletion flag set on them. However, they keep appearing in every Customer and Vendor reports.. Is there a way I can have these not appearing in these reports? Thank you Rukshan
-
Hi, There is a pdf file which we should pick up from a source FTP and drop into the target FTP. Requirement: After the PDF is completely written to the target FTP, we have to deliver data from SAP R/3 also to the target FTP server. We have chosen pro
-
Hi all, i have two wireless networks with two subnet (see the attached drawing) , all controllers run v4.2 access points type is 1020 . the first network in hall 1 have 4 wlc in subnet 172.16.40.X , the security is WEP key for wireless phone the sec
-
I recently had to send my iphone off for repair and when I have got it back it has been reset to factory settings. Can I get my phonos,music etc back through icoulds ?