Hot get and apply HPs for WebAS6.2 MINI?

I've recently installed a mini version of SAP 6.2 WEBAS (ABAP, of course). It comes in HP 24, but I would like to bring it to 29 at least so I could play with ABAP Memory Inspector.
Questions:
Where can I get the Hot packs?
How can I install them?
Thanks
Leonardo.

I can't find the HP's to download.
I go to SAP Support Portal with my OSS ID and seach in the Software download section but the search engine returns nothing.
There are a few options:
Search for Support Packages and Patches - RETURNS NOTHING even if I enter the right package name
Entry by Application Group - Doesn't work either
My Company's Application Components - It could be a great way of doing it, if I had a software registered... It is a mini...
Any help here is greatly appreciated.
Leonardo.

Similar Messages

I want to get a bluetooth keyboard for an ipad mini. Does it matter if its an ipad bluetooth keyboard. dont need the case

I want to get a bluetooth keyboard for an ipad mini. The case doesnt matter. But the one i'm looking at says IPAD or IPAD2 does it matter or will it work with the mini?

It might, it might not.
I have this keyboard for my mini and like it a lot.
http://www.amazon.com/gp/offer-listing/B00EXK1L38/ref=sr_1_5_olp?ie=UTF8&qid=138 6207195&sr=8-5&keywords=Logitech+keyboard+for+iPad+mini&condition=new
If you don't plan on carrying it, the keyboard that is sold for use with the Mac is a great keyboard because it is full size.
http://www.amazon.com/Apple-Wireless-Keyboard-MC184LL-B/dp/B005DLDO4U/ref=sr_1_1 ?s=pc&ie=UTF8&qid=1386207350&sr=1-1&keywords=apple+keyboard

If I get a 3D monitor for my mac mini, will it turn the graphic to 3D?

Can any one help me that what If I get a 3D monitor for my mac mini, will it turn the graphic to 3D?
or I need a 3d Processor for my mac mini?

Not sure what you mean, but I truly think it requires far more than just a 3-D Monitor.

How do I get a pass code, for my iPad mini

How do I get a pass code for my iPad mini.

What exactly do you meanby "Get a pass code"?
Do you want to set one?
do you need to enter one but don;t know it?
Please provide as much detail as possible about the issue.

Hot swap and JSP debugging for Weblogic in exploded format?

Hi,
I'm trying to use JDeveloper for JSF development to be deployed to a weblogic server.
I must say JDeveloper is a great tool for JSF development as none of the free IDE in the market can do what JDeveloper does.
However, I have a question on hot swap and JSP debugging.
I have managed to setup JDeveloper to debug my JSF application deploy to my Weblogic server's applications folder in exploded format.
I can step through the java code.
However, I didn't manage to do a hot swap and the break point set in the JSF-JSP does not seems to take effect.
I would appreciate any advice on the problem.
Thanks.
Han Ming

How did you setup the server to handle exploded format? Appreciate the help. Sorry can't help with your question though.
Thnx.
Soni

I have a 1st Gen Time Capsule 1tb. It turns on, boots up and turns green for 5-10 mins, but then turns solid orange and then blinks orange. I have removed the hard drive and replaced the power supply . . . still the same problem. Suggestions?

I purchased a used 1st Gen Time Capsule with a 1 tb hard drive.
When I plugged it in and did the initial setup, it worked fine, but gave me a hard drive error. A few minutes later the green light turned solid orange, then blinking orange, then the status light went off. The lights in back stayed on.
I removed the hard drive and rebooted, it turned green for 5-10 minutes then reverted back to a solid orange, blinking orange, then went off.
Next I purchased a remanufactured internal power supply, and installed it (without the hard drive in). It turned green almost immediately. After about 15-20 minutes, I decided to try to install the hard drive again, booted it up, and tried to erase the hard drive with was working properly according to the software. It stopped erasing the disc after about 20 minutes and turned solid orange again, then blinking, then no status light (but back lights were still lit).
I'm a bit flabbergasted at this point, any suggestions on what to do next? I think i've pretty much replaced everything except the logic board, but can't seem to find any information on the symptoms of a logic board malfunction.
Thanks!!!!!!!

A Gen3 is identical board to a Gen4 although they have some differences in firmware and wireless card was updated on every model.. but a Gen3 is substantially faster than Gen1, Gen2 which also have identical boards.
You can with careful shopping get a Gen3 pretty cheap.
Most use a delta power supply which I think is a lot better than the flextronics used in most Gen1/2
You can sell back the parts to ebay.. people still would buy the power supply etc. Even just the case can be useful to a repairer.
But if the board is gone.. it is hard to repair.. not impossible.. but hard.
Gen 3 and Gen 4 are not without faults.
See this page.
https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem s/apple-time-capsule-repair/new-issue-with-a1355-gen-3-tc
I have fixed it a different way.. by using the small converters you can buy in bulk from ebay for $1 each.. KIS3R33 .. they produce 3.3V at 2A peaking at 3A.. amazing.. I keep using them to replace onboard power converters by removing the inductor and simply power directly.. the end result has worked great. You can simply change the resistors around and get any output from 1v to 20v depending on input.
Is it worth doing it .. no of course not.. it will waste many more hours than $50 is worth.. but it is kind of fun that you can actually make things work again.
Here is a pic of the Gen 3 totally powered by me. All onboard power removed.
This was to track down the fault in the Gen3.. but I am kind of pleased that it ended up neat enough and reliable enough to work for more than a year.. the Gen3 still serves as a way to get Netflix via network for a friend running 24/7.
The units supply (from left to right)
1v, 1.1v, 3.3v, 5v, 1.8v
It is feed by 12v supply which is also directly connected to the hard disk.
So it is possible to fix.. !! Only got to be a bit crazy.

Music and sounds folders not appearing under "music and sounds" tab for approx 5 min after launch

So every time I launch fcpx, under the "music and sounds" tab, all that is appearing is my iTunes folder, with the other folders (iLife sounds, FCP sound effects, etc) not appearing for about 5 min or so...anyone else experiencing this? Is there a fix?

Nothing ever shows up under the "Music and Sounds" tab for me. I can wait an hour and nothing "appears." The dropdown menu is blank and can never be used to select anything: It remains blank.
I've deleted preferences, rebooted, logged-in as a different user and reinstalled the application. None of that has made the "Music and Sound" section work.
If I drag a folder to the top area (after pulling down the gray bar) the icon changes to show a green plus sign and the top area is outlined with green. After dropping the folder nothing happens; it does not appear in the list. I've tried several different folders from iTunes and other locations, all to no avail.

To group images with created text frame and apply label for it...

Hi Everyone,
We are currently working in auto figure placements for CS3. I have placing the figures into the document. Then i am creating figure caption text frames below the images. Here the concern is i need to group these image and the text box. After this i have to place these images with captions into corresponding pages where the figures have been cited. Also suggest me how to place these images in center of the page as well as in top or bottom of the page margin.
Can anyone help me for this. Your help will be much appreciated.
Below is my modified script,
var myPage;
main();
function main(){
    var myFilteredFiles;
    app.scriptPreferences.userInteractionLevel = UserInteractionLevels.interactWithAll;
    myExtensions = [".jpg", ".jpeg", ".eps", ".ps", ".pdf", ".tif", ".tiff", ".gif", ".psd", ".ai"]
    var myFolder = Folder.selectDialog("Select the folder containing the images", "");
    if(myFolder != null){
            if(File.fs == "Macintosh"){
                myFilteredFiles = myMacOSFileFilter(myFolder);
            else{
                myFilteredFiles = myWinOSFileFilter(myFolder);
            if(myFilteredFiles.length != 0){
                for (j=0; j<myFilteredFiles.length; j++){
                    var myImages = myFilteredFiles[j];
                    citePage(j);
                    app.activeDocument.pages.item(myPage.name).place(myImages);
                    alert("Done!");
function myMacOSFileFilter(myFolder){
    var myFilteredFiles = myFolder.getFiles(myFileFilter);
    return myFilteredFiles;
function myFileFilter(myFile){
    var myFileType = myFile.type;
    switch (myFileType){
        case "JPEG":
        case "EPSF":
        case "PICT":
        case "TIFF":
        case "8BPS":
        case "GIFf":
        case "PDF ":
            return true;
            break;
        default:
        for(var myCounter = 0; myCounter<myExtensions.length; myCounter++){
            var myExtension = myExtensions[myCounter];
            if(myFile.name.indexOf(myExtension)>-1){
                return true;
                break;
    return false;
//To find cited pages
function citePage(myInst){
    app.findGrepPreferences = app.changeGrepPreferences = NothingEnum.NOTHING;
    app.findGrepPreferences.findWhat="(?<=Figure \\d\\.)\\d";
    var myFind=app.findGrep(false);
    myPage = myFind[myInst].characters.item(0).parentTextFrames[0].parent;
    return myPage.name;
Thanks Regards
Thiyagu

The shadow effect has to have something to be applied on, but by default text frames borders and fills are invisible.
If you set the border of your frame to a color & thickness, you'll see it gets a shadow of its own, independent of the text. (Try it with dotted and dashed lines!)
Additionally, if you set the fill of your text frame to a solid color, you'll see the single solid shadow you were expecting.

How to restrict values and apply condition for a characteristic in a query.

Hi,
I have to add two customer class(characteristic) fields to my query which is available as a navigational attribute in my multiprovider ( from which my query is built ).
One field should give the values directly from master data. The values would be PV, CV, IT, OT. The other field should give only PV and CV based on the condition - Except CV, all others (ie. IT and OT) should be converted as PV.
I like this to be achieved in the query level since i dont want to disturb the underlying cubes in the multicube.
So i have two questions.
1. How to bring two fields in the query for the same characteristic.
2. How to achieve the condition in a characteristic for second customer class field mentioned above.
Could somebody help me in solving this?
Thanks in advance,
Somenath

Hi Somenath,
you are absolutely right;)
Besides the Third step
Try to add two new Selections to your Structure as
New Selection1 -> Set the Customer Class value to fix 'PV'
New Selection2 -> Set the Customer Class value to fix 'CV'
<b>you have to add</b>
New Selection3 -> Set the Customer Class value to fix 'IT'
New Selection4 -> Set the Customer Class value to fix 'OT'
Fourth step
Hide these four selections
Fifth step: Add a new formula to your Structure
(Customer Class == New Selection3)* New Selection1(Customer Class == New Selection4)* New Selection1(Customer Class == New Selection1)* New Selection2+Customer Class == New Selection2)* New Selection2
Hope it helps
Gabor
ps: experts maybe suggest easier way...

Help-urgent - how to update service pack and apply patches for ADS

Dear all,
   I've just download the sp 11 and the patch ,how should i update my ADS? I've try to search the forum but to no avail. Pls advise,thanks.
Regards,
Joan

Hi Joan,
To deploy an SCA or SDA, proceed as follows:
      1. Make sure you have downloaded the SCA or SDA from SAP Service Marketplace.
      2. Start the SDM GUI. To do this, execute the following file:
            a) Windows: RemoteGui.bat in folder \usr\sap\<SID>\<instance>\SDM\program
            b) Unix: RemoteGui.sh in folder /usr/sap/<SID>/<instance>/SDM/program
      3. The SDM GUI screen appears.
      Note: With SAP Web Application Server 6.30 the SDM server is started whenever you start the SAP system. To check whether the SDM server is running, use the tools SAP Management Console (Windows) or jcmon (UNIX).
      4. Choose "SDM Gui -> Login" or the icon "Connect to SDM Server". The dialog box "Enter Login Information for SDM Server" appears.
      5. Enter the following information:
            a) Password
            The initial password is "sdm" (without quotes).
            b) User description (optional)
            c) Hostname
            d) Port
            With instance number 00, the default port number is 50018. If your instance number is different from 00, the port number changes to
            Port = 50018 + 100 x <instance number>.
            You have to calculate the new port number and enter it manually.
      6. Choose "Login". The SDM GUI appears.
      7. Choose tab "Deployment".
      8. Choose "Add SCA/SDA to Deployment List (Local File Browser)". A file selection screen appears.
      9. Select the SCA or SDA file you would like to deploy and choose "Next" to read the information on the following screens.
      10. Choose "Next" until the "Start" button appears.
      11. Choose "Start". After the SCA or SDA has been completely deployed, a success message appears.
      12. Choose "Confirm" to return to the SDM GUI.
      13. When you have finished work, log out from the SDM server. Choose "Deployment -> Logout" or the icon "Disconnect from SDM server" for this.
If this answers your question, please mark the question accordingly and do award points if helpful.
Regards,
Arafat

After migrating CS3 to new Macbook Pro Retina... I get and error: "Licensing for this product has stopped working"...

Don't have old discs to reinstall nor serial number (unless I can use the serial number that appears on the product info on my previous mac).
I know that there are other forums indicating some steps to take. I've tried some of these steps but have not had much luck.
If I reinstall the programs on my old mac I am afraid that I wont be able to re-access them if I cant get either computer to work...
Thanks!

The problem is that migrating Adobe applications doesn't work.
You'll have to clean all the CS stuff off the new computer with the Adobe Cleaner tool:
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Then install with a new clean install file here:
Other downloads
However, be aware that CS3 often does not work on the latest Mac OS X versions!

My macbook pro keeps freezing up - i get the spinning rainbow for 20-30 min at a time ... (mid 2009 w/Maverick - re-installed after wipe)

I have the mid 2009 macbook pro and it was very slow and freezing all the time so I took it to the Apple store - they "wiped" it clean and re-installed the software it came with and Mavericks. It has 138.95 gb out of 249.2 available. I get the spinning rainbow all the time and sometimes it doesn't stop for 20-30 minutes at a time. It's not just one program - it can happen anytime. I've had to power off with the power button too many times and force quit programs repeatedly. I've done the repair disk including done in restore and in safe modes. I'm not sure if Mail is clogging it up or what. I don't know if I just need a new computer or if this is something relatively "simple".
I mostly use the computer for websites, blogs, and some video. I also have photoshop and do use that a bit as well. Would adding more memory help this issue? Not sure which way to turn - thanks in advance for any advice.

You can boot into your Recovery partition by holding down the command and R keys whilst booting. Once there, use Disk Utility to verify and, if needed, repair your hard drive. If the drive can't be repaired, then you know that you need a new hard drive.
Clinton

How do I use my iPad as the display and input device for my Mac Mini?

I plan to have the following stereo configuration:
Integrated amplifier with USB input that supports up to 24/192 audio, the Peachtree Nova 125
Mac Mini with USB connection to amp, wifi to the Internet, housed in the equipment cabinet with the integrated amp, no other music source. No display or keyboard connected to the Mac Mini.
I would like to use my iPad as the display and to control the Mac Mini to run Pandora, iTunes, Spotify, podcasts, etc.
Anyone have success with this general configuration?

You need a set of apps (one for iPad and another for computer) like Team viewer or Go to my PC

Can I get the tech spec for my mac mini online?

I am selling my mac mini and need the tech spec as the one's on the Ebay catalog are not correct for this model. There must be a way of entering my serial number but I can't find a suitable site and Apple Support will charge me for asking them!!!

Since you did not specify specify your model Mini try looking here:
Apple - Support - Technical Specifications

HT204306 I got a Iphone 4 and its disable for 23 million mins

my Iphone is disabled and I cant not restore it because I got to update it ....but I cant not update it because its locked ...and I cant not unlock it because it disabled

Placing your device into recovery (DFU-Device Firmware Upgrade) mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
   1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
       other end of the cable connected to your computer's USB port.
   2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
       until the red slider appears, then slide the slider. Wait for the device to turn off.
              * If you cannot turn off the device using the slider, press and hold the
                Sleep/Wake and Home buttons at the same time. When the device turns off,
                release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the
       device. The device should turn on. Note: If you see the battery charge warning,
       let the device charge for at least ten minutes to ensure that the battery has some
       charge, and then start with step 2 again.
4. Continue holding the Home button until you see the "Connect to iTunes" screen.
       When this screen appears you can release the Home button:
5. If necessary, open iTunes. You should see the following "recovery mode" alert:
6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

Hot get and apply HPs for WebAS6.2 MINI?

Similar Messages

Maybe you are looking for