Hot Key doesnt work properly

I Have a problem with my hot keys If I press Fn and F2 if get a nice box appear so as I can pick which mode I want my screen to run at which is great. But when I press Fn and F5 which is suppose to change my screen properties all it is that the screen flick to a different mode which it didnt used to do it used to display a nice little box which I could choose which setting I wanted.
I have installed every update known to man on off the Toshiba web site. I believe I have installed is update to "Hotkey Utilitys for Display Devices hotkey-dd-pa200-xp-280000" but I couldnt tell if it went on ok I clicked on TFnF5.exe but nothing really seamed to happed so I presumed that it was just quick install and I missed it. Also when I do actually change the setting to display on a monitor the setting are never saved.
Does anyone have any idea of what I am doing wrong or of what I have done wrong.
Help will be much appreciated
THANK

Hello Johnny
In my opinion there is nothing wrong with your unit. The explanation in previous posting is very good and precise. The FN+F2 key combination help you to change different profile created in Power saver utility. If the unit is connected to AC adapter there is just one profile but you can create you own profile with personal settings.
If the unit use battery power supply you can see (I think) 5 different profile and you can change between them using FN+F2 key combination without starting power tool. Check whole functionality and try to create your own profile under both power supply status.
FN+F5 key combination is just for changing display modus (LCD, LCD+Monitor, Monitor or even TV). That is all what you can do using this key combination. Screen properties will not be shown on this way.
Good luck!

Similar Messages

Keyboard windows key not working properly

I am not able to navigate to start screen with regular windows key press. I need to press hard to navigate to the start screen. But other functions with windows key is working properly. For Eg: Windows Key + R is working properly with regular press. Please help.

Hello:
I do not know of a setting that would do that - especially intermittently.
I would suspect the KB is failing/has failed.
Barry

Why my hp mini 5101 the "7" key doesnt work after upgraded the bios?

why my hp mini 5101 the "7" key doesnt work after upgraded the bios?
The current bios version is F.07

korpx,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

The cap lock key doesnt work sometimes, why? 13 pro(2013, late)

The cap lock key doesnt work sometimes, why? 13 pro(2013, late)

Hi, BOSCO_LIN.
Here is a helpful article that will walk you through troubleshooting the issue with your caps lock not responding.
One or more keys on the keyboard do not respond
http://support.apple.com/kb/ts1381
Regards,
Jason H.

My enter key doesnt work

heyy!! my issue is abit different. Before I used to hold alt down and use the character that i needed. Now i have to let go of the key and type. Its very annoying. I have tried wipe and master reboot!! Nothing works.. Also to top it all.. my enter key doesnt work... im constantly texting and bbm'in but i cant use enter i have to use the centre button!!! im soo frustrated. my phone is out of warranty... .. im very upset.. i used to be inlove with my phone!! its a curve 8520

Just plugged my wired keyboard in and it works. very strange, seems very unlikely that the only broken key is the enter key mhm. expect the unexpected. will contact the apple support on monday cause i live in germany and they dont work 24/7

Showing product key doesnt work

Hi, my name is varun, I bought my laptop (G6 pavilion 2320tx) one and a half year ago with inbuild windows 8 in it, 2 weeks earlier i refreshed my laptop. Now its showing "Activate Windows, This product key doesnt work". What should I do......

Try Factory Reset:
http://support.hp.com/us-en/document/c03546603
Else HP System Recovery should work:
http://support.hp.com/us-en/document/c03489643
Wish you luck,
Karthik
--Say "Thanks" by clicking the Kudos (purple thumbs up icon in the lower right corner of a post)
--Please mark the post that solves your problem as "Accepted Solution"

Enter key doesnt work in url line

enter key doesnt work in url line. only i have to pick go button with mouse

# Click the orange Firefox button and select Add-ons to open the add-ons manager
# In the list of extensions click on AVG Safe Search to select it, then click the Disable button
# Restart Firefox

Enter key doesnt work in SQL developer

enter key doesnt work in sql developer so cant creat new line in code.
enter key works fine when use word etc
Can I fix this in the SQL developer settings somewhere.?
thanks in advance.

Hi Sue,
Just to let you know, your solution worked... My SQL Developer got into a state again where the backspace key stopped working... doing 'load preset, default' on the accelerators did fix it. Strange, because I don't use/configure the accelerators at all. Thanks for that, and hopefully this will be permanently fixed in the next version.
To echo what I think someone else was trying to say... I also have the issue that sql developer will 'lock up' or get bogged down sometimes, when i'm just typing away in the worksheet. Any keystrokes I entered in though will always get entered into the worksheet, once sqldeveloper 'unfreezes' itself. Of course, this issue is an annoyance factor only (little bit of impact on productivity though), but hopefully it gets fixed as well.

L key doesnt work

yo what up yaLL got a new bLack macbook for the hoLidays and the Lowercase L key doesnt work onLy the upper case L works i wanted to post on here to see if it was just me being an idiot and i can fix it or i need to take it to get serviced. any heLp at aLL wiLL be appreciated thank you

so u think i shouLd take it to have it fixed. is there anyway i can get appLe to throw in some goodies for my inconvience. you wouLd think it wouL be that big of a probLem but it is reaLLy annoying. aLso how Long do u think it wouLd take them to perform this service and if i got the computer at compusa and got the extended warranty from appLe do i have to take it there or can i take it to the appLe store where i wouLd think that they wouLd be quicker

Replace content smart objects doesnt work properly.

Hello fellow Photoshoppers,
Currently i am working on reusable album templates with smart objects. At first i was very enthusiastic but this was soon to end. as the replacing doesnt work properly.
I made the smart object by using:
1. > file
2. > place
then i try to replace the content by using.
1. > layer
2. > smart objects
3. > replace contents
the old image should get replaced by the chosen file and matching size, smart layers etc. However when i perform the same actions my image gets replaced but it is not the same size as the smart object it replaced. This makes the entire template useless as it would take far too much time resizing every single image. inspired by another video I also tried double clicking the layer and tried replacing the image in the editing sceen by dragging another file on top of the smart object. Again, it does not spread out to the full smart object size and i'm stuck with a small image in need of extra work.
Needless to say, very frustrating.
Any thoughts?

Are you sure you understood how it is intended work?
That is an interesting question, i have no experience with photoshop as i bought CS5,5 just a week ago and have no experience with any of the previous versions either. All info regarding how to make such a template i found from various tutorials, i posted one below. When they do it the image get scaled perfectly. Now since they use some smart filters in the tutorial i applied them aswell to see if this would fix the problem but it did not.
http://www.picturesocial.com/video/wedding-photo-album-templates
Are the images you want to switch in at least always of the same width to height-relation?
I checked both files for consistency and discovered they were shot on different camera's. One file ( the origional smart object ) was cropped form a 21,0MP file and the other was croped from a 10,1 MP file. Both images were cropped to a 2x1 ratio. Having discovered the difference in pixel amount i cropped a different 21,0 MP file to 2x1 ratio and checked both files for their exact dimensions (both images are equal in size with 5616 x 2808 pixels) and replaced the content with the newly cropped file which gave a much better result. However, the image was slightly smaller in photoshop leaving a small gap where the origionally placed smart object lined up perfectly. I turned the situation around and placed the 10,1MP cropped image as the smart object and replaced the content by a 21,0 MP cropped image. As to be expected i ended up with a new image much larger then the smart object. So the smart object does not constrain the files to the dimensions set. As it turns out it only scales the replaced content relative to the size of the origional content of the smart object.
I just need a reusable template with objects that:
- cannot be moved once locked ( if possible) but can have its content replaced
- scales the replaced content to the predefined dimensions
- needs no prework like cropping to the same aspect ratio as the smart object content. ( i want to be able to place a landscape sized raw (3x2) on any landscape format (2x1 / 16x9 / 4x3 or whatever) i find it acceptable to having to crop a portret to landscape orientation first before being able to replace a landscape.
now ive been searching for more info and some people say indesign is much faster in making album pages so I am installing the program as we speak hoping this will be the solution.

Hot Keys Not Working With Yosemite

I recently updated to Yosemite from Snow Leopard and have been having some issues with my hot keys. I'm working in CS6 and have updated the latest version of Photoshop from the Adobe Manager.
The hot keys do work sometimes, but then they stop. Is anyone else have this issue, or is there an update in the works?
It's such a slower work process to have to go through the menus to find what I want, mainly Command Z.

same issue- trying to find a solution...

Keypad doesnt work properly

my iphone keypad doesnt work properly the last row where the space bar and the button to switch to numbers doesnt work

Standard troubleshooting steps in order are power the iPhone off and on, Reset, Restore and if not change after any and all, make an appointment at an Apple Store if there is one nearby or call AppleCare - (800) 694-7466.

Ejecting external discs doesnt work properly, no spin down of disc. why?

ejecting my external discs doesnt work properly anymore in 10.6, no spin down of disc happens, the finder unmounts the disc(s) and then the disc spins on and on. thats weird, because, in 10.5 i ejected discs and then they went spinning down the drive, as it has to be.
when i unplug the disc, which is unmounted from desktop, and still spinning, it makes a terrible noise in the disc. like a high pitched short tone.
any idea whats going wrong here?
thanks!

you probably mean "causing the fail to spindown"
you maybe mean software like techtoolpro5 or drive genius3?
yes i disabled these helper apps on the discs, but first i used it (like monitoring
all discs if they are nearly full, or working s.m.a.r.t and so on. yes its useful,
but obviously it causes problems. i must mention, that i tested my 4 external drives again,
and i found out that i can eject all discs, like said before, but only 2 of the discs are spinning down, after ejecting, BUT only when i use the button "eject" in harddisctoolkit, they dont spin down, when ejecting from desktop (apple+E), and the other 2 of the 4 drives refuse to spin down, after ejecting, even with pressing eject in harddisctoolkit....
i can also state, that these 2 discs, which refuse to spin down, are FW800/400 discs and connected via FW800. and the 2 discs which spin down succesfully are UBS2 discs, if thats worth mentioning...
Message was edited by: purepeter

Message ShortCut Key not working properly

Hellow every one, guys i am encountrying a problem regarding my nokia e5 , i've just bought it recently and still left with 8 months warranty. The problem i am facing is, the message shortcut key which is on the keypad of this Phone, is not working properly. When i do long press to open new text msg, it sometimes doesnt opens any thing and sometimes even open messaging and then close it. At a certain angle i have to apply a little more force in order to operate it properly. Please help me wheather its a hardware problem or any sort of dust particles have emerged inside the keypad resulting in loose contact of the button and the motherboard.
REPLY ASAP.

Hi Shanam,
Welcome to the forum
Thanks for joining the community, if you believe there is an issue with your device that is preventing you from optimizing all the options available to you.
I would advise for you to bring/ or send it for repair. Keep sending us your replies and comments on the forum.
Kind regards.
Carl
If this post answers your question, you can help others by clicking the green accepted solution' button.
Please ask your questions to the main board and not to my mailbox. Thank you.

My GX630 doesnt work properly on Windows Vista 64 bit

Hi,
I have problem with my GX630, its doest work properly at W Vista 64 bit, exactly Sleep mode ... its imposible to awake my computer nd I have to turn it off and than on to wake it up ...
those buttons Turbo nd Eco mode doesnt work.
sometimes happen that i get blue error screen and reset but I dont know why ... it wrotes something with some .dll file ...
some people told me that its error is caused by that thing that there are no drivers for 64 vista yet ...
I would be pleased if someone could help me up to this topic or to my email (removed to protect user privacy) or ICQ (115-378-414) thank to all of you Jabu

"sometimes happen that i get blue error screen and reset but I dont know why ... it wrotes something with some .dll file ... "
What is the BSOD error code? What .dll ? Write down the exact error.
Do you OC your notebook?
"some people told me that its error is caused by that thing that there are no drivers for 64 vista yet ... "
Install Drivers from MSI web:
http://global.msi.eu/index.php?func=downloaddetail&type=driver&maincat_no=135&prod_no=1513
"those buttons Turbo nd Eco mode doesnt work."
You need SCM: http://global.msi.eu/index.php?func=downloaddetail&type=utility&maincat_no=135&prod_no=1513
But x64 bit is N/A.
Why you use x64bit version anyway? Why not 32bit?

Hot Key doesnt work properly

Similar Messages

Maybe you are looking for