Hot key settings on t540p internet explorer

i have a t540p with the web hot key over the numpad. Running windows 8.1. I have also the enhanced usb keyboard with a similar hotkey.
the usb keyboard hotkey opens the desktop version of internet explorer, where as the one on the native keyboard tries to open the metro version.
I would like to make the one on the native keyboard also open the desktop version.
Aside from the fact that this is what I want it to do, our company policy has UAC disabled which means several Metro apps will not run unless it is enabled. Metro Internet explorer is one of these.
I know how to edit the USB keyboard but how can I change the native keyboard?
Solved!
Go to Solution.

nevermind found the answer
in internet explorer - internet options - programs
under opening internet explorer section change the pull down to "always on the desktop" and check the little check box underneath

Similar Messages

Setup failed (Could not write value devenv.exe to key \SOFTWARE\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_BLOCK_CROSS_PROTOCOL_FILE_NAVIGATION)

Hello, all,
I encounter a really confused problem while installing Visual Studio 2013 Professional.
It say Install cannot continue because some required components failed.
And there is error information given by log file.
[1868:0558][2015-04-18T00:55:46]i000: MUX: ExecuteError: Package (vs_devenv) failed: Error Message Id: 1406 ErrorMessage: Could not write value devenv.exe to key \SOFTWARE\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_BLOCK_CROSS_PROTOCOL_FILE_NAVIGATION.
Verify that you have sufficient access to that key, or contact your support personnel.
[2058:2044][2015-04-18T00:55:47]e000: Error 0x80070643: Failed to install MSI package.
[2058:2044][2015-04-18T00:55:47]e000: Error 0x80070643: Failed to execute MSI package.
[1868:0558][2015-04-18T00:55:47]e000: Error 0x80070643: Failed to configure per-machine MSI package.
Strange is that I cannot even find the key FEATURE_BLOCK_CROSS_PROTOCOL_FILE_NAVIGATION under
FeatureControl.
I have searched in Internet, but no one gives out a effective way to solve this problem.
Could you help me!!! Thank you very much.

Hello Forever_fzf,
The problem is that Visual Studio is trying to write that key to your OS but failed. There are many possible reasons so it is hard to check it just from the above error info, I think you can take the following actions to test whether they can fix your problem:
1. It is possible the the source(the installer) is corrupt on your OS. So our first step is to check the source. Please download the ISO format and verify its hash checksum sha-1 value by refer to the following page:
https://www.visualstudio.com/en-us/downloads/visual-studio-2013-iso-sha1-vs
2. If the source is alright, check that you are administrator and you have ran the setup as administrator. If you've already checked that and you still do not have privilege when install. We need to refer to the following blog:
http://blogs.msdn.com/b/astebner/archive/2006/09/04/solving-setup-errors-by-using-the-subinacl-tool-to-repair-file-and-registry-permissions.aspx
It contains a script, the script will involve subinacl tool to give all registries the Admin privilege, then you will be able to write keys to that registries.
3. The reigistry key HKLM\SOFTWARE\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_BLOCK_CROSS_PROTOCOL_FILE_NAVIGATION sounds related to IE. May I also know your IE version?
Best regards,
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Internet explorer policy settings

Hi
I need to change some options in internet explorer for all users like in the Security Group . Net Framework . Loose XAML= Enable So can't found this option in the group policy .
How i do that change any option for all users
because change these options for each user
is hard work.
My system windwos server 2008 r2.
Regards

Hi,
I agree with Zanderol24. When we create a GPP Internet Settings item for Internet Explorer, in the Properties of the item, click
Security tab and click Custom Level bottom, then we can enable
Loose XAML for .NET Framework.
Besides, when we enable .NET Framework, please make sure that the color of the circle in front of the setting is green. If the color of the circle in front of the setting is red, the setting will not be applied.
About this point, we can refer to the following link:
Red / Green: GP Preferences doesn’t work even though the policy applied and after gpupdate \force
http://blogs.technet.com/b/grouppolicy/archive/2008/10/13/red-green-gp-preferences-doesn-t-work-even-though-the-policy-applied-and-after-gpupdate-force.aspx
Best Regards,
Erin

ActiveX settings in Internet Explorer for ZCI

Hi all,
regarding to SAP Note 766191 ACF needs several ActiveX components activated to work within a WebDynpro.
I searched the SAP Notes database for similar notes regarding ZCI but didn't found any.
After try and error I found out that ZCI needs the same ActiveX settings in the Internet Explorer like ACF as well.
But the customer has all ActiveX components deactivated, so my question is:
Is there an alternative for ActiveX or is ActiveX a must for working with IF (within WebDynpro)?
Kind regrards,
Alex

Hello Maarten,
sadly, your answer didn't help, because this is the same what SAP says.
But "After try and error I found out that ZCI needs the same ActiveX settings in the Internet Explorer like ACF as well."
This is the reality on my test system. I created a ZCI form, added the necessary scripting, changed the layout type for the form / for the WebDynpro ABAP to ZCI / native and it only works pretty fine as long as I have the named ActiveX components activated...
Maybe you would like to test it on one of your systems, I would be interessted if you had the same problem when deactivating the ActiveX components.
Besides, my test system is the SAP NW2004s Trial Version with SP12 right here from the SDN and I connected another Trial Version of NW2004s with a Java Stack.
Kind regards,
Alex

Uncheck'Automatically detect settings' in Internet Explorer

Hi All
How to Uncheck 'Automatically detect settings' option in internet explorer using VBScript???

You can set this in the registry, using batch or vbscript:
HKCU/Software/Microsoft/Windows/CurrentVersion/Internet Settings/Connections/DefaultConnectionSettings
The 9th Byte should be changed to 09, this sets the checkbox to automatically detect settings.
I have used this to switch back between my auto-configuration script and automatically detect settings. If fast switching is what you are after I would use this approach, if you want to manage multiple computer, just push it via group policy.
Source: https://groups.google.com/forum/?fromgroups=#!topic/microsoft.public.inetsdk.programming.scripting.vbscript/EGdKXiEcwG4
Jaap Brasser
http://www.jaapbrasser.com

A bi publisher report is not displayed in internet explorer

Hi
I am having a problem with one of my computers. It has a problem when a user is trying to access a bi publisher report.
The part of the window when it is supposed to display the report it is saying "Internet Explorer cannot display the webpage" .
It displays the part when the user inserts the filters, but when he presses the 'GO' button I am having this error message.
The problem is locally, because in another computer this user can access this report without a problem.
Can you please help me to solve this issue?
Thank you and best regards

Try comparing the settings of the Internet explorer on the machine you are having trouble with running the report vs the computer that you are successfully able to run the report. As this is computer specific, this should be either related to IE settings or missing components like flash etc installed on the machine.
Regards,
-Amith.

URL issue with Windows 7 Internet Explorer 11 and SAP NW PI 7.

Hello SAP community,
I am facing a strange issue with Windows 7 - Internet Explorer 11 and SAP NW java services (I hope I am in the correct discussion) ...
When I try to open URL http://sapserver.hosters-name:port it is working so far with Windows 7 and Internet Explorer 11.
But when I click than on NWA (example), I am getting "http 500 server error".
I don't have the issue, when I start-up a VMware Workstation with Windows XP and Internet Explorer 8.
But now the strange part: In our network DNS (Domain Name Service), we can also open the URL by http://sapserver.our-dns:port.
Than it is working without problems with Windows 7 and Internet Explorer.
I would agree to state the comment - it is just a Windows 7/Internet Explorer 11 issue, if it wouldn't work for both URLs (http://sapserver.hosters-name:port = problem URL; http://sapserver.our-dsn:port = working).
We are using a SAP NW PI 7.x system. Some URLs for PI are using http://sapserver.hosters-name:port/java service.
Do you have any hints what is cause the issue - I suspect some with Internet Explorer and Firefox (because with Google Chrome at least the URL for NWA is opened, beside the issue, Google Chrome can't display NWA content)?
Thanks for your help.
Best regards
Carlos

Hi all,
I think I found the solution.
The reason seems to be, the domain name for http://sapserver.our-dns:port, "our-dns" was already added to the compatibility view settings of Microsoft Internet Explorer.
That seemed to be the reason, why it was working with http://sapserver.our-dns:port.
When I now added for http://sapserver.hosters-name:port the domain "hosters-name" to the compatibility view settings it is now working.
Internet Explorer Options => Settings for compatibility view => Add domain
Best regards
Carlos

Thinkpad USB 3.0 Dock\Twist Internet Explorer Issue

Hi
I am racking my brains at this one!
I work at a school where we have recently acquired 60 odd Thinkpad Twists. In the classrooms we have Thinkpad USB 3.0 docks connected to SmartBoards. The issue we have is a very odd one - when we connect the dock to the laptop via USB, then open Internet Explorer (10), we are presented with a white blank page - with for example at google.com as the home page. The Google search field and icon can be found further down the page. As soon as we remove the USB cable Internet Explorer works as it should i.e. no problem.
Google Chrome does not have this problem, nor Firefox.
We are running Windows 8 64 bit.
Have tried the following:
- updating the USB dock software from Lenovo's site.
- installing the displaylink driver from displaylink.com.
- running IE without add-ons i.e. iexplore -extoff.
- Have seen a forum where someone suggests disabling HTTP 1.1 through proxy connections and Disabling/Enabling Enhanced Protected Mode in Internet Explorer Advanced settings.
- resetting Internet Explorer.
All to no avail.
Help would be much appreciated. Not a criticial problem, but a very irritating one for our users!
Solved!
Go to Solution.

Problem solved! It was the Smartboard drivers - just downloaded the latest from their website. All appears in proper working order now!

Webmail is not working internet explore after installed sp3 exchange 2007 roll up 15

webmail is not working internet explore after installed sp3 exchange 2007 roll up 15 but mozill firefox webmail is working fine

Hi,
Does the issue happen to all users? What’s your IE version? Is there any error when you access OWA 2007 in IE?
Please click Compatibility View settings in your Internet Explorer. Then, add the OWA site to the list of sites to be viewed in compatibility view and check whether the issue persists.
Regards,
Winnie Liang
TechNet Community Support

Windows failed to apply the Internet Explorer Zonemapping settings - the data was invald (event ID: 1085)

Hi All,
I have a large domain and a long list of websites that are trusted using the following group policy setting:
Administrative Templates > Windows Components > Internet Explorer> Internet Control Panel > Security Page >
Site to Zone Assignment List
On all (XP/vista/win7) workstations across the domain I'm getting the following error:
Log Name: System
Source: Microsoft-Windows-GroupPolicy
Event ID: 1085
Task Category: None
Level: Warning
Keywords: Description: Windows failed to apply the Internet Explorer Zonemapping settings. Internet Explorer Zonemapping settings might have its own log file.
There's nothing either side of this error in the log that shines any more light on the issue.
I know which group policy object its applying these settings but cant find which of the entries in the site to zone assignment list is causing this issue. I looked in the
Group Policy/Operational log but all I see is the following entry which says "completed" but is logged as an error:
After some research I'm guessing that the issue is an incorrect wild-card. This is what my trusted sites list looks like (with names removed of course):
http://servername.*
*.internaldomain.com.au
*.domain.com.au
*.domain.*
*.externaldomain.com
*.domain.inernaldomain.com.au
*.domain.*
*.domain/name.*
*.domain.inernaldomain.au*
*.domain.com
Is there something obviously incorrect here?
Does anyone know where I could find an article that clearly outlines the acceptable wildcard syntax for the
"Security page\ site to zone assignment list" group policy? Ive read every forum post, website and blog I could find on the internet but nothing is clear and I wasn't able to find an MS document that steps it out. I've also changed the
existing list a number of times based on blog posts etc but had no luck.
**Please Note**
I dont want to change to a different method or have an intellectual debate re why I would have these sites/wildacrd/policy set. I'm really looking to see what entry is invalid and where the documentation is for this policy setting so i can make sure they are
always correct in the future.
thanks in advance for your time and assistance
Simone
PS: I've already read the following posts a number of times:
I get no data but have identified the GP that is causing the issue:
A test case for troubleshooting group policy application – Event ID 1085 and 7016 - http://blogs.technet.com/b/askds/archive/2008/08/21/a-test-case-for-troubleshooting-group-policy-application-event-id-1085-and-7016.aspx
I dont have any 2 letter domain names:
Problems Adding Top-Level Domains to Zone Sites List - http://support.microsoft.com/kb/259493
I tried formatting the list per this article:
[Solved] The Group Policy client-side extension Internet Explorer Zonemapping failed to execute - http://daily-it.blogspot.com.au/2008/09/solved-group-policy-client-side.html
Has no domain wildcard format info:
Behavior of Site to Zone Assignment List - http://blogcastrepository.com/blogs/mattbro/archive/2006/09/07/2183.aspx
Great article, no wildcard data:
Internet Explorer Policy Settings - http://technet.microsoft.com/en-us/library/bb457144.aspx
Internet zonemapping problem: http://social.technet.microsoft.com/Forums/en-US/winserverGP/thread/a8756a27-b562-42ad-8782-87d284e6bcfb/
Spiceworks Event 1085 (Warning) - http://community.spiceworks.com/windows_event/show/1582-microsoft-windows-grouppolicy-1085
Event ID 1085 — Application of Group Policy - http://technet.microsoft.com/en-us/library/cc727303%28v=ws.10%29.aspx
Application of group policy - http://technet.microsoft.com/en-us/library/cc727312%28v=ws.10%29.aspx
Evt ID 1085 GP client-side extension IE ZoneMapping failed to exec - http://www.winvistatips.com/evt-id-1085-gp-client-side-extension-ie-zonemapping-failed-exec-t706399.html
Event 1085 - Internet Explorer Zonemapping - http://www.minasi.com/forum/topic.asp?TOPIC_ID=29206
EventID.net - http://www.eventid.net/display.asp?eventid=1085&eventno=1412&source=Userenv&phase=1
Event ID 1085 - Internet Explorer Zonemapping failed to execute - http://www.experts-exchange.com/OS/Microsoft_Operating_Systems/Server/2003_Server/Q_24897522.html
UPDATE:
I disabled the original policy and created a new one with only one trusted site address in it. Then I logged into a clean test machine did some testing.What I found after a few hours of testing was; regardless of the site that I have listed in group policy
The HKCU\Software\Policies\Microsoft\Current version\Internet Settings\Zone Map Key registry entry is
always updated with that entry on the workstation. So the workstation's registry always updates the key with
*.sitename.com per the site that I have set in GP
If I run GPUPDATE /FORCE over and over again, on the same machine, under the same user account, using the same DC I get:
Failure, Failure, Failure, Success, Success, Success, Failure etc
I wasn't able to determine any pattern to the failures, I tried stopping some of the processes on that machine but didn't find anything that would make it fail/succeed reliably.
There is no AV or firewalls installed on my test machine
Anyone have any more ideas? I think I might install filemon and try to capture some more data unless there's a better tool?

Yes, and that's straight from my Microsoft TAM. As long as you include an asterisk inside those site-to-zone mappings, you'll continue to see them. The key is whether or not they're working. In my environment, I've seen complete success using the
http://*.domain.com, or
https://*.domain.com, no matter if the site is http://www.domain.com or
http://milk.does.a.body.good.domain.com. Despite the success, we continue to see the errors. It's much the same as Group Policy Preferences where you can apply a setting once, or repeatedly. If you apply
something repeatedly and it's already set, lookout for some complaints in the application log. It really is annoying. There's potential to play with the logging levels, but I'll admit that my experience ranks as "novice" in this specific section of group policy.
This link might get the creative juices flowing:
http://blogs.technet.com/b/askds/archive/2008/07/18/enabling-group-policy-preferences-debug-logging-using-the-rsat.aspx
I see you've already read a number of articles including "a test case for troubleshooting those event IDs"... I sympathize with your efforts. I despise warnings and errors that I can't solve or don't want to see, but I've researched a number of them to death
and found that many are simply "normal". Uggg... I hope this helps, but please take my advice, as with anyone else's out here, with caution. I've seen some crazy recommendations. I saw a recommendation to install SQL on a DHCP server to get failover clustering
up and running. I hope the guy asking for help didn't listen to that one! : ) - josh

How to see settings when "custom level" is greyed out in Internet Explorer

Group Policy is set which causes the custom level button to be greyed out in Internet Explorer. Thus, I can't even see what settings are set let alone change them. Is there any good way to even figure out which settings are set?
And no, it's not in the Group Policy Management Console. The settings were imported from some machine a long time ago. It's not like there's a list of the settings in GPMC showing what is set. So, the only way apparently to change the setting in Group Policy is
to configure some machine with the right settings, install GPMC and import from that machine overwriting the old policy. So, I need to know what's set now (not that I necessarily even want to do that).
machine in question: Windows Server 2008 R2 datacenter
IE version: 9 with all patches

Hi,
Please understand that all IE security settings are stored in the following registry keys:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Internet Settings
HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\CurrentVersion\Internet Settings
If you want to check the settings on the machine, you should local the registry keys in Registry Editor. If you want to import the settings from one machine, please just right click on the
target registry key and choose Export to export these settings to a .reg file.
Regarding detailed information about Internet Explorer security zones registry entries, please refer to the following article.
Internet Explorer security zones registry entries for advanced users
http://support.microsoft.com/kb/182569/en-us
In addition, here is an article about how to reset Security Settings back to Windows Defaults, maybe it’s useful to us.
Reset Security Settings back to Windows Defaults
https://blogs.technet.com/b/fixit4me/archive/2009/01/30/reset-security-settings-back-to-the-defaults-fix-it-live.aspx
Best Regards,
Andy Qi
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Andy Qi
TechNet Community Support

Internet Explorer 10 IEAK capturing Security Settings

I am trying to package a custom installation for Internet Explorer 10 using IEAK. I am having some trouble with the Import Security Settings portion of the tool.
It is failing to import the security settings. It says it has imported them, but upon installation the security settings have not been included in the IE 10 installation.
Looking at the "INS" folder that is built and the custsec.inf file create there, I can see that only two security settings have been captured -- "1401" and "2500" and none of the other 50 or so security settings are collected
for any zone.
In addition, I have trusted sites set to not require HTTPS, but that selection is not captured into the custom IEAK generated browser installer.
Does anyone have any tips on how to successfully deploy a customized version of IE 10? I am even more reliant now on IEAK since IEM mode was removed from Group Policy, so I reall need to figure out why it doesn't function correctly.

More...
When ActiveSetup is run on a 64bit OS, first all the 32bit ActiveSetup keys are run first, and the 64bit ActiveSetup keys are run second.
The problem is that IEAK is adding the CUSTOM ActiveSetup to the 32bit key, and the ie4uinit.exe is added to the 64bit key. While the IEAK has an ">" listed in the GUID (to signal for it to run last) it runs "last" in the 32bit
ActiveSetup commands. The 64bit ones (which the ie4uinit.exe is part of) all run after the 32bit stuff....
So it appears that IEAK is not designed to build an IE 10 installation that will run correctly on 64bit OSes. The IEAK CUSTOM settings will always apply prior to the ie4uinit running. I suppose this can be changed by further manipulating the
registry after IEAK customized IE 10 is installed and making sure the >{GUID} entry is moved to the 64bit registry.
I suppose another way to look at it is ie4uinit is not correctly noticing that that the user settings are already present in the user's registry and is wallpapering over them with the incorrect settings. Either way, the end result is that the incorrect
settings are being configured for the user on first logon.
I find it difficult to believe that Microsoft IE team has messed this up and that no one has discovered it before. (I'm not being sarcastic) That makes me question what I am doing that is incorrect because I can't believe that a problem like
that would exist in a product as major as IE - and that no one has run into it and blogged about it. I must have
something incorrect, but I really can't figure out what it is. Why is IEAK's IE 10 writing that CUSTOM ActiveSetup into the 32bit registry on a 64bit machine? Maybe it will work to just move the CUSTOM key from 32bit to 64bit at the end
of the installation.
Looking closer, the IE installer writes to both the 64bit and 32bit ActiveSetup areas in the registry. The problem is that the 64bit one never runs because the 32bit one has run already and ActiveSetup runs only once. So the IEAK CUSTOM
runs once out of activesetup in the 32bit registry. Then the IE4Uinit runs once from the ActiveSetup 64bit registry area, then the IEAK CUSTOM ActiveSetup is evaluated (it has the same GUID as the 32bit one) ActiveSetup decides that GUID has already
run and doesn;t run a second time.
I have been able to solve my problem simply by deleting the IEAK CUSTOM entry in ActiveSetup under the 32bit registry area I just look at each subkey of HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Active Setup\Installed Components
Looking at the string values of StubPath in all the subkeys I find one with the value "RunDLL32 IEDKCS32.DLL,BrandIE4 CUSTOM" and I delete the parent key from ActiveSetup. (don't delete the one in HKLM\Software\Microsoft\ActiveSetup)
This makes it so that IEDKCS32 always runs after the ie4uinit thing, and that makes everything work as planned. I have no idea why I have to do this. Hopefully someone else will find this saga useful in their own situation.

Internet explorer settings

hi all
i have seen so many times , in any sap servers for eg in sap crm when we click some things which opens internet explorer page , it shows page can,t be displayed.
what are the settings to be made for that?
thanks
akhil

Hi,
Yes, many times, all new SAP products uses IE. In order to to work properly, you need to configure all your settings in SAP side. You need not do anything in IE side, except may be enabling popup blocker. (this can be done instantly by holding control key).
Thank you,
Mohan Simma

MS Internet Explorer Registry Key

I have a PC Windows 2000 Professional with Internet Explorer 6.0, and two version of Java Plug-in installed (14.1 and 1.4.2). Now, when I switch between the two versions, which keys of the registry are involved in the process?
In my case when I switch between the two versions with an Administrator account, all goes well, but when I try with an ordinary account the operation fails.

So, if I need to load a jar file into the ext directory of the plugin, this is the initial key that I would read to discover the actual location of the plugin on the client?
Get the default value and then read the key:
HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Plug-in
using the version specified in the first location....
Is that correct? Or is there an easier way to discover the actual location of the current plugin?
pyro_dw
HKEY_LOCAL_MACHINE -> Software -> Classes -> CLSID ->
{8AD9C840-044E-11D1-B3E9-00805F499D93}

I can't download videos to Real Player. The settings are correct and i can download in Internet Explorer 7 with no problem but not FireFox 5...any ideas??

I can't download videos to Real Player. The settings are correct and i can download in Internet Explorer 7 with no problem but not FireFox 5...any ideas??

I'm still experiencing this problem. I went to settings, general, software and it says Install now. But when I try, I get an error message.

Hot key settings on t540p internet explorer

Similar Messages

Maybe you are looking for