Hot spots to trigger image states in Apps

I watched one of Terry White's videos on Adobe TV in which he used buttons (pins) on a map to reveal different images which were basically the different states of a multi-state object. He then output this to an iPad and everything worked fine. I've tried to replicate this as follows:
Draw a box around part of a map, convert it to a button
Create a stack of photo-images in separate frames, Select all of them and create a New Multi-State Object
Select Hidden until triggered option for the multi-state Object
Set the Button properties: On Roll-over, Go to State nnnnn (where nnnnn is one of the images in the multi-object state)
This works perfectly in the SWF previewer, but when I output to Adobe Content Viewer the hotspots don't work, and the top-most object in the multi-state object always shows all the time.
Also, I've inserted a video (MP4) file but it doesn't show in the Content Viewers either. I get sound on the dekstop Content Viewer, but nothing on my Android phone.
Has anyone made this work please?

Terry’s stuff is great but much of it is two years old or more. And SWF is not DPS. Rollovers are not supported.
If you have a Lynda.com account, I invite you to watch my just released DPS Essentials course.
Here’s a link to my blog post announcing the course: http://boblevine.us/my-first-lynda-com-title-adobe-digital-publishing-suite-essential-trai ning-is-live/
If you don’t have a Lynda subscription, there a link in the post for a one week trial.
Finally, please post any followups or DPS related question in the DPS forum, not here.

Similar Messages

Multiple "hot spots," one rollover image

Im building an online artist's portfolio website and trying
to lay out a dozen thumbnail images that when rolled over trigger a
corresponding image to appear to the left of the thumbnails. All
hot spots trigger the same image to change. Any advice on how to
achieve this?

I went through the steps KenRogers2 suggested, and when I
first click on "+" under the behaviors tab I get error message #
61878. After clicking ok the behaviors tab opens. After going
through the steps and previewing in Safari (Im running OSX 10.4.8)
all I get is the hot link hand over the thumbnail, but no rollover
image replaces the default. Any ideas?
I've also recently downloaded an update for dreamweaver and
have been getting a jave error when I try to open any file, but
everything seems normal after I hit ok. Not sure that has anything
to do with the other error, just thought I'd throw it out
there..

Hot spots in an image

I am editing a group photograph taken outdoors in the shade with a fill flash. Two of my subjects were wearing glasses and they have small but bright reflections from the flash on the rim or lens of the eyeglasses. These are literally just points of light in the photo, but they are distracting.
I've looked at the images at very high magnification and each point is no more than a small cluster of blown-out pixels. I'm not sure which Elements tool to use or what the correct procedure is. Any help would be greatly appreciated. Thank you.

Steve,
 
 So, how did you get everyone to smile and have their eyes open...at the same time. LOL.
 
 To get rid of hot pixels, I like to add a blank layer above my image and set it to darken. Next I grab the blur tool and use it over the hot pixels. (Note: Theres a box in the menu bar you need to check to make the tool work on a blank layer.)
 
 I thought I'd try my hand at your image.
 
 
<a href="http://www.pixentral.com/show.php?picture=1SDFbdBjnP5U7aPuop2mBp5ge9k61Z1" /></a>
<img alt="Picture hosted by Pixentral" src="http://www.pixentral.com/hosted/1SDFbdBjnP5U7aPuop2mBp5ge9k61Z1_thumb.jpg" border="0" />
 
 I tend to let blend modes do most of my editing for me.
 
 If interested here's how I did this..
 
 1. I selected the sky then added a gradient adjustment layer. (Its the Chrome Gradient with reverse checked.) This layer is set to Hue 100% opacity.
 
 2. I created a blank layer and merged the background and gradient layer then I used Hue/Saturation in the menu bar to desaturate it. This layer is set to Color Burn. I masked off the trees and below. (If you dont use a layer mask add-on, you can either use create a clipping group with an adjustment layer mask and mask that way or grab the eraser and erase the areas you dont want the high contrast appliedand it will be ugly in the lower portion of this image. (This Color Burn layer is set at 100% opacity.)
 
 3. Next I added a Brightness/Contrast adjustment layer. (I checked legacy so that it would be just as it is in ElementsI use Photoshop.) I have masked off the opposite area that I applied the previous adjustmentso its only on the close trees down. (I used 30/40 for the settings.) The layer is Normal 100% Opacity.
 
 4. The next layer up is a blank layer set to Darken 100% opacity. On this layer, I used the blur tool on all of the hot pixel areas. This works well on all but a set on the blonde ladys face/ear area and on the older ladys glasses. These have a purple hueIll fix those next.
 
 5. I created a new blank layer and leave it at Normal 100% opacity. I grab the clone stamp and in normal blend mode clone the blonde ladys purple hot pixels away.
 
 6. I created another new blank layer over the last to fix the purple in the older ladys glasses. This layer is in Normal blend mode but I have lowered the opacity to 54%. I set the clone stamp to Color so I would only change the purple and darkened pixels.
 
 7. Next I created a new blank layer and merged everything into one layer. Note, I still have my original layers below the mergeIm not flattening. To this layer, I apply USM to sharpen the image. (If you know how to edge mask, I would recommend going that route.) For the purpose of this, I just applied USM to the entire image. This layer is set to Normal 59% because I over sharpened.
 
 8. I created another blank layer over this and set it to Darken 100% blend mode. I used the blur tool to remove a few artifacts sharpening the image brought out.
 
 9.Almost done. Now, I create a new blank layer and combine merge everything up to this point. (Did I mention the shortcut to merge a composite layer is control, alt, shift, E.). So, now I have everything combined on this top layer. Looks good but some areas need some blending.
 
 10. I duplicate my original background layer; then move it up the layer stack until it is directly below my corrected composite layer. Did you guess that Im going to blend using my original. LOL. I look at the slopes of the mountain. Some areas look too dark and the edges too sharp. I apply a mask to my corrected composite image and with a low opacity bush bring back some of the original photo until I reach a happy spot. I also did this with the tree line right above your familys heads. (Remember if you dont have a layer mask add-on, you can use a clipping mask to hijack an adjustment layer mask or use an eraser at low opacity to blend the images.
 
 11. Hmmm. Clothing has lost its detail in the shadows. To fix this, I duplicated the original and placed it over the corrected composite. I place the oginal layer into Linear dodge and drop the opacity to 20%. I mask out everything then paint in the mask over the areas with clothingavoiding that white coat. Linear Dodge will suck the detail out of that. Okay, better.
 
 (It looks good at this resolution but the formula might not hold when applied to your full resolution imagein particular I am not so sure how well the desaturated layer set to Color Burn blend step 2 will work when applied to your full resolution image. You might look at skipping the step and working through bumping the contrast using a different blend mode or another brightness contrast layer.) At full resolution you might need to add some noise to that gradient to make it blend into the photo as gradient's tend to be smoother than the surrounding image data. (I'm thinking maybe simplify...rasterize...the gradient layer then add noise to the resulting simplified layer.)
 
 edit: corrected a typo because I don't think implify is a word. LOL.
 
 Heres a link to the Elemask tutorial if you opt to hijack an adjustment layer mask.
 
 http://www.myjanee.com/tuts/elements/elemask.htm
 
 Heres a link to Grants Tools if you opt for using a layer mask add-on.
 
 http://www.cavesofice.org/~grant/Challenge/Tools/Files.html
 
 and you dont need either link if you opt for the eraser. LOL.
 
 HTH,
 Terri

Hot spots pushing image down

This is probably a noob question but when I inset hot spots
into an image it pushes the image that is placed directly next to
it down to the next line. I'm not sure why it is doing this and is
there anyway to have hot spots and not bump the image down below
the one that is being editied? Thanks

Show us your page, please.
Shane H
[email protected]
http://www.avenuedesigners.com
=============================================
Web Dev Articles, Photography, and more:
http://sourtea.com
=============================================
Proud GAWDS Member
http://www.gawds.org/showmember.php?memberid=1495
Delivering accessible websites to all ...
=============================================
"helpthanks" <[email protected]> wrote in
message
news:ed4jfl$bf2$[email protected]..
> This is probably a noob question but when I inset hot
spots into an image
> it
> pushes the image that is placed directly next to it down
to the next line.
> I'm
> not sure why it is doing this and is there anyway to
have hot spots and
> not
> bump the image down below the one that is being editied?
Thanks
>

Submit button for hot spot quiz

the hot spot quiz functionality is not very intuitive. is there a way to proceed to the next slide after the user hits "submit?" also, is there a way to only allow one hotspot selection that once the user makes a selection he/she cannot keeping placing selections all over the page? thanks.

Hello Lilybiri,
Thank you for offering to help find a solution for my Hot Spot Quiz issues. If you would like to (or have the time to) help me here's what I am trying to accomplish:
We need some Hot Spot quizzes which require the user to click on one, or sometimes one of several, hot spots on an image object. I have already encountered the Captivate 4 hot spot quiz limitation of having to click on all of a group of hot spots in order for the answer to be correct when we want the user to click on just one of any of the correct hot spots. I have developed a customer specific header and footer bar template for each slide, with the footer bar containing navigational buttons for beginning/previous/next/end functionality, have disabled this navigation in the question slides as we don't want this available to the user during the quizzing. Instead, we want to advance to the next question slide if the user clicks the correct hot spot, or produce a text caption (with a continue button to advance to the next question slide) accompanied by an arrow animation indicating the correct hot spot to click (which would require executing an advanced action). The user gets one attempt to answer the question correctly. Each question slide will have a text caption with the question for the user to answer. Because of the limitations I've encountered with Captivate 4 hot spot quizzing I've been considering creating custom question slides just as you suggested. Unfortunately, we have a very tight deadline to meet and a lot of content to pour into this project, so I need solutions that are as simple and quick to develop as possible. It seems that sometimes Captivate does not allow for this to happen and I've been discovering that it's been increasingly frustrating to use. Any assistance you could lend me would be greatly appreciated and I thank you for your time.
Sincerely,
Roland

WiFi hot spot application for Nokia X6

Hi,
Is there any WiFi hot spot application for Nokia X6? (Except JoikuSpot).
Please don't suggest apps which helps to connect to free wifi hot spot, I'm looking for an app which turns my 3g / 2g connection to wifi hotspot.
And any one from India facing the problem to purchase an app through ovi store? For me its giving error message saying "your language is not supported". I have selected English is as my language but still I'm getting the same error.
Solved!
Go to Solution.

Though i'm not sure whether the problem is same but pls do refer to the thread below.
/t5/Ovi-com-Ovi-Store-Ovi-Share-and/Ovi-Store-paid-apps-amp-SMS-problem/m-p/1089569
Please mark the post as solution if it solves your problem.
Current Device - Nokia Lumia 1020/920

Hot Spot Icon/animation legenth

I am using the 30 day free version of Adobe Captivate 4 and when I preview my "presentation" in a web browser the icon/animation for the Hot Spot question stays on the screen for three to five seconds after pressing the submit button.
How can I change the timing for the Hot Spot icon/animation display?

Hello Lilybiri,
Thank you for offering to help find a solution for my Hot Spot Quiz issues. If you would like to (or have the time to) help me here's what I am trying to accomplish:
We need some Hot Spot quizzes which require the user to click on one, or sometimes one of several, hot spots on an image object. I have already encountered the Captivate 4 hot spot quiz limitation of having to click on all of a group of hot spots in order for the answer to be correct when we want the user to click on just one of any of the correct hot spots. I have developed a customer specific header and footer bar template for each slide, with the footer bar containing navigational buttons for beginning/previous/next/end functionality, have disabled this navigation in the question slides as we don't want this available to the user during the quizzing. Instead, we want to advance to the next question slide if the user clicks the correct hot spot, or produce a text caption (with a continue button to advance to the next question slide) accompanied by an arrow animation indicating the correct hot spot to click (which would require executing an advanced action). The user gets one attempt to answer the question correctly. Each question slide will have a text caption with the question for the user to answer. Because of the limitations I've encountered with Captivate 4 hot spot quizzing I've been considering creating custom question slides just as you suggested. Unfortunately, we have a very tight deadline to meet and a lot of content to pour into this project, so I need solutions that are as simple and quick to develop as possible. It seems that sometimes Captivate does not allow for this to happen and I've been discovering that it's been increasingly frustrating to use. Any assistance you could lend me would be greatly appreciated and I thank you for your time.
Sincerely,
Roland

Image as Hot-Spot

Hi all........
I had created a screen and displayed an image in a container.........
can i make it as hot-spot.
i.e- by clicking on this image another screen should be called. Is it possible.......????????
Edited by: kiran.g on May 22, 2009 1:39 PM
Edited by: kiran.g on May 22, 2009 1:42 PM

Hi,
I don't think it is possible to make it as a hotspot. But you have a event in the class
cl_gui_picture which is 'picture_click' by using this event you can overcome the issue you have
that is by clicking on the picture trigger this event and then call another screen.
Thanks&Regards
Sarves

Drop-Down Hot Spot Images

Hi,
When I generate a SSL Print out of topics that use Drop-down
Hot Spots with images in them, the images print out. I do not want
them to print out. I have tried the Advanced Options and unchecked
"Include drop-down text" and they still print.
If there isn't a easy way to stop them from printing, is
there a way to stop the text from getting messed up by wraping to
the right of the image, it would be better to have it start at the
bottom.

You could try adding a conditional build tag against them and
excluding this from your printed output single source layout. I
haven't tried this so can't say it would work for definite but it's
worth a go.

Using Roll Over Images for Hots Spots in DW CS 5

Ok I had this sort of working .. but
what i am trying to do is have pictures pop up when the mouse rollovers a hot spot.   I do this with two layers and using the behavior window
The full project is at http://www.kasdivi.com/pages/map.html... ( thought that might be better then posting code)   The issue is in the left hand top of the map wjere you see malmok (Col H Row 2)or Boka Bartol (also Col H Row )
you have to move down the page before the image will show
I though there might be something in that area mapping as if you leave map in topmost position and mouse over Boka Onima (Column M row 5) the image pops up fine
I tried to restart with a simpler test www.kasdivi.com/testmap.html
the supposedly live hot spots are at Malmok (H2 ) and Boka Onima (M5) but it this test nothing works
I think I am doing something baically wrong
any guidance will be appreciated
Jasom

You have some code errors that could be causing issues.
Things like missing quote marks around the alt attribute on line 91, your links near that line are also malformed to both your images and webpages.
Run your page through the validator here and repair your errors:
http://validator.w3.org/
If it's still not funtioning correctly after you have taken care of the problems, post back and we can take a closer look...

How to create a hot spot for a browser filled image?

I have a background image created in Photoshop in the browser fill, scale to fill.
This is my landing page and would like to create a hot spot or "invisible" rectangle to link to another page in my site when clicked.
I have this done and working, however, my problem is that when my browser size is enlarged or reduced, the spot where I want the hot spot to be changes in size and location.
I want to create a hot spot that will keep its form around my logo no matter the screen size.
I have tried this with a no fill box and white stroke to see how it reacts with each fill property but cannot figure out how to create a box to be in a fixed position that will always match up
with the browser fill image location and size.
Thanks for your help.

Hi
Have you tried to pin the box on page so that it should be in fixed position ?
Also if want the box to be on some specific position with page scroll, then you can try applying scroll effects which would scroll the box on page but within defined positions.
Thanks,
Sanjit

Image Map Hot Spot

I am using DW8 I have an image map. If I use the square/rect
tool or the
circle tool I can get a hot spot to show. If I try to draw a
polygon shape,
I do not get the green overlay that works with the other
tools.
What am I doing wrong or is this a bug?
Kim

Yes. Every time, on every image (placeholder).
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"KimMazz" <[email protected]> wrote in message
news:[email protected]...
> Hmm, so you're saying that you can see the overlay when
you draw a poly
> shape?
>
> Kim
>
> "Murray *ACE*" <[email protected]>
wrote in message
> news:[email protected]...
>> To be honest, I'm not sure. I have submitted it as a
bug in the past,
>> but without steps to make it reproduce every time,
it's hard to have
>> someone fix it.
>>
>> --
>> Murray --- ICQ 71997575
>> Adobe Community Expert
>> (If you *MUST* email me, don't LAUGH when you do
so!)
>> ==================
>>
http://www.dreamweavermx-templates.com
- Template Triage!
>>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>>
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
>> ==================
>>
>>
>> "KimMazz" <[email protected]> wrote in
message
>> news:[email protected]...
>>> Murray,
>>>
>>> Which would mean that it's my PC bug? How can it
be fixed then?
>>>
>>> Kim
>>> "Murray *ACE*"
<[email protected]> wrote in message
>>> news:[email protected]...
>>>>I can't reproduce it with the page you sent
me, Kim.
>>>>
>>>> --
>>>> Murray --- ICQ 71997575
>>>> Adobe Community Expert
>>>> (If you *MUST* email me, don't LAUGH when
you do so!)
>>>> ==================
>>>>
http://www.dreamweavermx-templates.com
- Template Triage!
>>>>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>>>>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>>>>
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
>>>> ==================
>>>>
>>>>
>>>> "KimMazz" <[email protected]>
wrote in message
>>>> news:[email protected]...
>>>>>I found that if I go to the map in code
view and delete all the code
>>>>>except for the coordinates then it shows
the overlay. I will send you
>>>>>the file.
>>>>>
>>>>> Kim
>>>>>
>>>>> "Murray *ACE*"
<[email protected]> wrote in message
>>>>>
news:[email protected]...
>>>>>> Kim:
>>>>>>
>>>>>> I have seen this happen. I have no
idea why. Can you send me the
>>>>>> page?
>>>>>>
>>>>>> --
>>>>>> Murray --- ICQ 71997575
>>>>>> Adobe Community Expert
>>>>>> (If you *MUST* email me, don't LAUGH
when you do so!)
>>>>>> ==================
>>>>>>
http://www.dreamweavermx-templates.com
- Template Triage!
>>>>>>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>>>>>>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>>>>>>
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
>>>>>> ==================
>>>>>>
>>>>>>
>>>>>> "KimMazz"
<[email protected]> wrote in message
>>>>>>
news:[email protected]...
>>>>>>> Ok Murray,
>>>>>>>
>>>>>>> Of further interest. When I open
a different page in a different
>>>>>>> site, that "already" has an
image map I can draw a polygon. If I
>>>>>>> open a page that "does not"
already have an image map I can not draw
>>>>>>> a polygon.
>>>>>>>
>>>>>>> Kim
>>>>>>>
>>>>>>> "Murray *ACE*"
<[email protected]> wrote in message
>>>>>>>
news:[email protected]...
>>>>>>>> Hmmm - You are on Mac?
>>>>>>>>
>>>>>>>> --
>>>>>>>> Murray --- ICQ 71997575
>>>>>>>> Adobe Community Expert
>>>>>>>> (If you *MUST* email me,
don't LAUGH when you do so!)
>>>>>>>> ==================
>>>>>>>>
http://www.dreamweavermx-templates.com
- Template Triage!
>>>>>>>>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>>>>>>>>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>>>>>>>>
http://www.macromedia.com/support/search/
- Macromedia (MM)
>>>>>>>> Technotes
>>>>>>>> ==================
>>>>>>>>
>>>>>>>>
>>>>>>>> "KimMazz"
<[email protected]> wrote in message
>>>>>>>>
news:[email protected]...
>>>>>>>>> actually clickity click
no, only kidding. Yes I am doing click,
>>>>>>>>> click click to draw the
polygon. I tried click drag click drag and
>>>>>>>>> it didn't work that way
either.
>>>>>>>>>
>>>>>>>>> the coordinates are
getting recorded, it's just not showing me the
>>>>>>>>> overlay. So, I can't
select it and/or set the behavior.
>>>>>>>>>
>>>>>>>>> Kim
>>>>>>>>>
>>>>>>>>> "Murray *ACE*"
<[email protected]> wrote in message
>>>>>>>>>
news:[email protected]...
>>>>>>>>>> How are you drawing
the hotspot? Are you doing
>>>>>>>>>>
click:click:click:click to mark the apices of the polygon?
>>>>>>>>>>
>>>>>>>>>> --
>>>>>>>>>> Murray --- ICQ
71997575
>>>>>>>>>> Adobe Community
Expert
>>>>>>>>>> (If you *MUST* email
me, don't LAUGH when you do so!)
>>>>>>>>>> ==================
>>>>>>>>>>
http://www.dreamweavermx-templates.com
- Template Triage!
>>>>>>>>>>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>>>>>>>>>>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>>>>>>>>>>
http://www.macromedia.com/support/search/
- Macromedia (MM)
>>>>>>>>>> Technotes
>>>>>>>>>> ==================
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> "KimMazz"
<[email protected]> wrote in message
>>>>>>>>>>
news:[email protected]...
>>>>>>>>>>>I am using DW8 I
have an image map. If I use the square/rect tool
>>>>>>>>>>>or the circle
tool I can get a hot spot to show. If I try to draw
>>>>>>>>>>>a polygon shape,
I do not get the green overlay that works with
>>>>>>>>>>>the other tools.
>>>>>>>>>>>
>>>>>>>>>>> What am I doing
wrong or is this a bug?
>>>>>>>>>>>
>>>>>>>>>>> Kim
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>
>>>
>>
>>
>
>

DPS: Disabling Top Navigation Bar in Adobe App Builder disables Hot Spots in Articles

When I disable the top navigation bar in Adobe's app builder, my hot spots (linked to MSOs) in certain articles are also disabled. The hot spots work if I "refresh" and swipe back to an article with no overlays. How do I get my hot spots to work and also have the top nav bar disabled? Thanks.

Unfortunately, I do not know how to access it now that the app has been accepted. I had originally typed it up in Word thinking that I would be able to access it from the appeal site later, but that site is no longer accessible.
I essentially explained that I had followed the 59 page DPS guide step-by-step and that no where did it explain how to enable the iOS status bar to be visible at all times ... that I was a designer and not a programmer ... that in 2012, 12 of the top 20 grossing apps on the iTunes Newstand were created with DPS ... that my app was an interactive "literary" travel app that was to be read like a brochure. All that must have done the trick.

Installing Mobile Wi-Fi Hot Spot App issue on 2nd laptop

I have downloaded the Mobile Wi-Fi App for Hot Spot and installed properly on my primary Windows 7 laptop. This included setting up user id and password for wi-fi connection. This took quite an effort with help from mobile technical support. But I did it !
However I am not able to resolve setting up for my second laptop computer under Windows 7.   Verizon told me that I can set up on up to 3 laptops.   The issue comes about during the app installation. It asked to enter password with a default user ID of null. There is no option to change the user id from null to my user id. Of course it will not match my password entered. So my mobile app installation stalled in the middle and could not continue. I have repeatedly tried this installation with same error. And I called technical support but this time he cannot help.  He remoted desktop in and saw my error and couldn't do anything.
Has anyone set up Mobile Wi-Fi App for more than 1 laptop computer?
Has anyone encounter this authentication error?
Is there any mobile Wi-Fi user out there?
Any help appreciated.
TIA

This Wifi app installation issue seems to be a software bug that has to be addressed by their software engineering. The technical support team has no clue how to resolve it. It installs fine on a Win7 machine if it is an initial install. The issue is for subsequent install after your account has been set up as the account id is not being passed through.
Verizon WiFi hotspot seemed to be around since 7/2009. I am surprised after 4 years, Verizon doesn't know and has not addressed it. Win7 has been around since 6/2009. Wifi App does not run on Win8. Many people still use Win7. I hope Verizon is reading this and really do something. Somewhat disappointing experience.   Notice no Verizon moderator replied to this thread.
For those who want to pursue further. The direct Verizon Mobile WiFi support number is 877-346-3053.   If you call the regular support number, it will take your several bounce to get to the right place.   I spent a whole afternoon with them on this.

Hot Spot over Image Map

RoboHelp 8
I have a diagram with numerous image maps. How do I highlight which image map I am hovering over? Is it in te
Jac

Not sure about a "highlight" - I use a roll over tool tip with a brief description - I use 130 hot spots with roll over tips on one diagram alone (hot spots link to entries in a table).
Regards,
GEWB

Hot spots to trigger image states in Apps

Similar Messages

Maybe you are looking for