Hot sync using a new name?

I bought a used z22 after mine was stolen and the HotSnyc comes up in the other persons name. How do I change it. I tried adding my name but when I sync it it didn't take the new name.
Post relates to: Palm Z22

Hello and thank you for using the Palm Help Forums!
I would recommend a hard reset. It's a safe thing, mainly because you bought the device new. A hard reset will erase all infromation on the device and restore settings to default. For further information and instructions please visit kb.palm.com and look up article number 42094 in the solution id search field.
Post relates to: Treo 800w (Sprint)

Similar Messages

I did a system restore on my iphone 2 and used a new name (Allan 2). Now I need to access my original iphone apps on itunes, Where do I find my first phone display an itunes? thanks

I did a system restore on my iphone2 and used a new name for thr phone on ituhes (Allan2). Now I need to access my saved apps on the original phone name. How do I find the two phone profiles on itunes. When I open it with my phone it only shows Allan2. Thanks

If your apps were in itunes on your computer, then they should still be there. Just sync them back to the iphone.
BTW, the backup that itunes performs when syncing does NOT include music/apps/movies/tv shows etc.
Anything purchased on the iphone would have to be transferred to your computer. File>Transfer Purchases
Unlike music/vids/etc, you can redownload apps
How to redownload purchased apps from the App Store

I share a macbook with my other half and we both use it for our iphones. When syncing using the new software I now have all of her and my contacts on my phone. I don't want her contacts! How do I get rid?

I share a macbook with my other half and we both use it for our iphones. When syncing using the new software I now have all of her and my contacts on my phone. I don't want her contacts! How do I get rid?

Hi,
You have 2 solutions:
1 - You can use 2 differents icloud account
2 - You use the same account but you don't sync yours contacts.
You configure that in Settings > icloud
You activate or desactivate what you want.
Have a nice day.

Saving a copy of a document using a new name or location

I am trying to save a document under a new name and new location. I cannot find the "Save As" command in pages or keynote. How do I save a document using a new name or save the document into a new location?

It's a little different now. Instead of using Save As (which is now gone as you know) use Duplicate then save that document and give it the name and location you want.

Syncing using the new online itunes function ?

Hi I watched the keynote and saw where it is now possible to download a song from the cloud that you have previously purchased. I tried this for myself and was able to pull a song from my library that was not on my phone which is really great. My question is can I reverse it, can I delete a song from my phone now or send it back to the cloud or whatever. For example the song I pulled out of my previously purchased library was a christmas song I do not need to take up space with on my phone with christmas songs in June. Is there a way now to unsync that song from my iphone without having to plug it back into my computer. ??

Anyone ? no ideas on the actual music management of my iphone ? so we can pull songs from the cloud but we cant get them off our phone once we do ?

Restore Palm Desktop Addresses from last Hot Sync and using those backup files

I have numerous issues. First I have Windows Vista 64 byte which does not allow a USB Hot Sync so I attempted the Wireless Hot Sync and killed my Palm Centro. The information was restores going to the store and they did something. So that is my first issues - I am unable to Hot Sync. However the Hot Sync took place and I have found the 'Back-up' files on my Computer from that Hot Sync Operation.
My new issue is that somehow I lost many addresses on my Palm Desktop Address File and that is a mystery to me.
What I am trying to accomplish now is to restore those missing addresses on my Palm Desktop (Computer Files) using if possible those backed up files from the last Hot Sync as i do not believe I should try the Wireless Hot Sync again since that has failed me twice and my phone dies and it needs to be restored at the Sprint store. I'm not even sure I remember now how exactly that was done....
So, is there a way to restore addresses to my computer Palm Desktop from those back-up files from the Hot Sync? OR does anyone have a solution to actually performing this Wireless Hot Sync without killing my Palm Centro again?
Thank you for any ideas or suggestions to either or both issues.
Restore Lost Addresses from Palm Desktop without a Hot Sync using back-up Hot Sync files on the same computer or
Performing a Wireless Hot Sync on a Windows Vista 64 byte system that actually works on a PALM Centro?
Karen
Post relates to: Centro (Sprint)

You can recover the data from your user folder provided you have only sync'ed once with the PC when you discovered the data missing. When you sync to the PC there are files created for each PIM category in your user folder. For Example; datebook.dat or datebook (Depending on the version of Palm Desktop) and datebook.bak. Using 6.2 the file names are .mdb and mdb.bak. For 6.2, the files are located in the username folder in PalmOSdesktop in my documents.
The files are named .dat and .bak. When you sync, the current data is stored in .dat. The next time you sync the data in the .dat file is copied to the .bak file. You can rename the .dat to .old. then rename the .bak to .dat. If the data in the .bak file is intact, it will now be in palm desktop when you reopen Palm desktop. I have included a link to show you how to find the userfolder on the PC.
http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=26674
Here is another link regarding data loss;
http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=39503
The best way to backup your data is to use the export feature in Palm Desktop. Make a new folder on the PC desktop named Palm Desktop Backup data. Next, select the category you want to export. You will get a window that asks where you want to save the file, save in the folder created on the desktop. There is a button that allows you to select currently selected record or all, select all. If you don't select all, then only the record highlighted is exported. You will then need to name the file for export, I suggest the name of the category, eg: datebook (With current date). Do this for all critical data in each category. With the data exported to the folder on the PC desktop, you can save this data to a flash drive, external hard drive or a CD-RW. With this method you will have your data in a seperate place than Palm desktop and the device. If you "Lose" data again, you can import the data back into palm desktop.
Make sure that when you make changes in palm desktop or the device to export the data to the folder created for the backup.
Here is a link for other options for backing up your data;
http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=28751
Click on the following link to the kb.palm.com webpage for the article regarding Synchronizing under 64-bit Windows editions: Bluetooth HotSync setup.
http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=49229
For reference purposes, click on the following link for the support page for your device on the kb.palm.com webpage.
http://kb.palm.com/wps/portal/kb/na/centro/centro/sprint/home/page_en.html
There are links on the page to the user guide, troubleshooting, how to's, downloads, etc.

Powershell command to migrate Exchange 2007 mailbox databases with a legacy name, & import them into a new 2007 instance, with a new name.

Hi All. I am currently at the later stage of provisioning a new CCR Exchange 2007 migration (to
virtualise old Exchange 2007 hardware) for 5,000 users & have a quick question.
I have created around 15 newly named storage groups, & have named 1 new DB per group, with the same name (let's say New-DB-1), residing within them. The problem I have, is the old legacy DB's have different names (let's say Old-DB-1) & I need
to import them into the new storage groups, to match the new names. So far I can import/export between old & new OK if both old & new DB names\folders etc. names marry up perfectly, but are unable to if there not the same. Does anyone have any thoughts
on how best to tackle this, as this is one of the final hurdles stopping the migration? Many Thanks, John

Hi All
Many Thanks for the feedback.
The terminology 'migrate' was used based around the fact I will be decommissioning the old 2007 physical environment. This is after moving all DB's over to the new newly created Virtual environment that will host all roles.
The solution I ended up using yesterday, was the following:
1) Dismounted the relevant named DB (NEWDB) in the new environment.
2) I then ticked the 'This database can be overwritten by a restore option' box.
3) Copied over the old named DB (OLDDB) to the same location, & overwrote using the new name (NEWDB).
4) Re-mounted the (NEWDB).
5) Ran the following 2 PowerShell commands:
Get-mailbox –database OLDDB | move-mailbox –targetdatabase NEWDB -configurationonly:$true
Get-MailboxDatabase NEWDB | ResetSearchIndex.ps1 -force
6) Checked to make sure the clients were working ok, in the now the new (NEWDB) environment.
Rich: Many thanks for your PS script, which I will test with future DB moves & provide feedback
J
John.

Mail sync issue with new iPod Touch

I have been unable to successfully perform an initial mail sync using my new iPod Touch 32 GB with Version 3.1.1.
All is being successfully sync'd with the exception of mail. The error box when I click on mail with the iTouch reads - "Cannot Get Mail - The connection to the server mail.me.com failed"
I have an active .Mac account. I can successfully log into "mobileme" via my G5 1.8 dual running OS X 10.5.8. My cable web provider is Comcast in the Middle TN area.
Thanks in advance with any suggestions.
Djay

I found my "issue" is not an issue when I was able to access WiFi. The touch downloaded my messages! I was naively "assuming" that the initial setup via iTunes would have provided my initial message download.
Marking this "false alarm" as solved. I'll avoid "jumping the gun" on my next hurdle.

Set new name in RMAN

Hi,
We have 12 TB of data to be restored from PROD to DEV.
In Prod, we have ASM having 12TB of space and in DEV, we have 2 filesystem (DATA1 & DATA2) shares 6TB each.
We used the below script for RMAN restore using set new name to restore it to the different locations in DEV:
connect target /
run
sql "alter session set optimizer_mode=RULE";
allocate channel c1 device type disk;
allocate channel c2 device type disk;
allocate channel c3 device type disk;
allocate channel c4 device type disk;
allocate channel c5 device type disk;
allocate channel c6 device type disk;
allocate channel c7 device type disk;
allocate channel c8 device type disk;
allocate channel c9 device type disk;
allocate channel c10 device type disk;
allocate channel c11 device type disk;
CATALOG START WITH '/oracle/backup/ora-prod-ebs/RMAN/EBSGOLD_08062013';
set until time "to_date('2013-JUL-14 01:00:00','YYYY-MON-DD HH24:MI:SS')";
SET NEWNAME FOR DATAFILE '+DATA/stbyprod/datafile/a_media08.dbf' to '/oracle/oradata/VMWDEV1/DATA1/VMPRD/a_media08.dbf';
SET NEWNAME FOR DATAFILE '+DATA/stbyprod/datafile/a_media02.dbf' to '/oracle/oradata/VMWDEV1/DATA1/VMPRD/a_media02.dbf';
SET NEWNAME FOR DATAFILE '+DATA/stbyprod/datafile/a_media03.dbf' to '/oracle/oradata/VMWDEV1/DATA1/VMPRD/a_media03.dbf';
SET NEWNAME FOR DATAFILE '+DATA/stbyprod/datafile/a_media04.dbf' to '/oracle/oradata/VMWDEV1/DATA1/VMPRD/a_media04.dbf';
SET NEWNAME FOR DATAFILE '+DATA/stbyprod/datafile/a_media05.dbf' to '/oracle/oradata/VMWDEV1/DATA1/VMPRD/a_media05.dbf';
SET NEWNAME FOR DATAFILE '+DATA/stbyprod/datafile/apps_ts_tx_idx.521.799600075' to '/oracle/oradata/VMWDEV1/DATA1/VMPRD/apps
SET NEWNAME FOR DATAFILE '+DATA/stbyprod/datafile/sysaux.344.809874457' to '/oracle/oradata/VMWDEV1/DATA2/VMPRD/sysaux.344.809874457';
SET NEWNAME FOR DATAFILE '+DATA/stbyprod/datafile/apps_ts_tx_data.343.810623133' to '/oracle/oradata/VMWDEV1/DATA2/VMPRD/apps_ts_tx_data.343.810623133';
SET NEWNAME FOR DATAFILE '+DATA/stbyprod/datafile/apps_ts_tx_data.342.810623199' to '/oracle/oradata/VMWDEV1/DATA2/VMPRD/apps_ts_tx_data.342.810623199';
SET NEWNAME FOR DATAFILE '+DATA/stbyprod/datafile/apps_ts_tx_data.341.810623265' to '/oracle/oradata/VMWDEV1/DATA2/VMPRD/apps_ts_tx_data.341.810623265';
SET NEWNAME FOR DATAFILE '+DATA/stbyprod/datafile/apps_ts_tx_data.340.810623327' to '/oracle/oradata/VMWDEV1/DATA2/VMPRD/apps_ts_tx_data.340.810623327';
SET NEWNAME FOR DATAFILE '+DATA/stbyprod/datafile/apps_ts_tx_data.339.810623399' to '/oracle/oradata/VMWDEV1/DATA2/VMPRD/apps_ts_tx_data.339.810623399';
SET NEWNAME FOR DATAFILE '+DATA/stbyprod/datafile/apps_ts_tx_data.338.810623475' to '/oracle/oradata/VMWDEV1/DATA2/VMPRD/apps_ts_tx_data.338.810623475';
SET NEWNAME FOR DATAFILE '+DATA/stbyprod/datafile/apps_ts_tx_data.337.810623543' to '/oracle/oradata/VMWDEV1/DATA2/VMPRD/apps_ts_tx_data.337.810623543';
SET NEWNAME FOR DATAFILE '+DATA/stbyprod/datafile/apps_ts_tx_data.336.810623611' to '/oracle/oradata/VMWDEV1/DATA2/VMPRD/apps_ts_tx_data.336.810623611';
restore database;
switch datafile all;
recover database delete archivelog;
alter database open resetlogs;
But, unfortunately all the files were getting restored to only one of the filesystem DATA1 and not to DATA2 at all.
Hence, RMAN restore failed with the following error since no space is available in DATA1
channel c9: ORA-19870: error while restoring backup piece /oracle/backup/ora-prod-ebs/RMAN/EBSGOLD_08062013/vmwprod_full_backup_JUN8_VMWPROD_34228_1
ORA-19502: write error on file "/oracle/oradata/VMWDEV1/DATA1/VMPRD/a_txn_data01.dbf", block number 523904 (block size=8192)
ORA-27072: File I/O error
Linux-x86_64 Error: 28: No space left on device
Additional information: 4
Additional information: 523904
Additional information: -
failover to previous backup
Please help us to solve this issue.
DB Version: 11.2.0.3

Hi,
It is hard to say anything with an incomplete script and without the RMAN restore output/log.
If they are too large to post here, you can upload it somewhere, e.g pastebin.com.
It is very unlikely that Oracle ignored DATA2 in your script and replaced it to DATA1 on all occurences...

755p Hot Sync erased all previously saved pics...Advice Please.

Hello,
When I Hot Sync from 755p to PC, all pics from device are usually saved to My Documents\Palm OS Desktop\755p\Photos\BackupForInternal\Palm so I typically delete the pics from device because all new pics are added to any that were saved previously to PC and I have all pics I ever took. Unfortunately, I do not have memory card and did not back up the pics from PC to disk.
Today, I Hot Sync and the new pics that were on my device were saved to PC as usual but this time all pics that were saved previously to PC were erased.
How can I get these erased pics back?
Will system restore (Windows XP) to point prior to last hot sync work?
Thanks!
Post relates to: Treo 755p (Sprint)
Post relates to: Treo 755p (Sprint)

thepoeta15 wrote:
Unfortunately then the data is lost. I talked to a tech here as well and it might be possible to do the system restore and get the pictures back. But the system restore is meant to recover system data if there was a bad program installed or to recover to an earlier point for better system stability
What are the chances that recovering to an earlier point will recover the images to Palm Desktop?
Message Edited by mnea on 08-22-2009 02:12 PM

My contacs list wont hot sync

My contacts list will not hot sync w/ my new centro. I've tried sveral different things. Can anyone help with this? Thnx!
Post relates to: Centro (Sprint)

A little bit more information is going to be needed on this one?
Where are your contacts located on the device or on the pc?
What are you trying to sync with?
Does everythign else synchronize just fine or is it just contacts?
Do you have an exchange server set up on the device?
Post relates to: Centro (Sprint)

My wife had an iPad for a year and synced to our computer with no problem. I recently received an ipad2 and when I tried to sync using separate apple and iTunes passwords, under her computer user name, it appears I over-road her account and synced all he

My wife had an iPad for a year and synced to our computer with no problem. I recently received an ipad2 and when I tried to sync using separate apple and iTunes passwords, under her computer user name, it appears I over-road her account and synced all her apps with my apps on my iPad. I then set myself up as a new user on our computer and tried to sync. I now get the error that my iPad is synced to another library. How can I start over without erasing all my data on the iPad?

Go back to her login. Unless you deliberately erased apps, they should all be there, both yours and hers! Then, you need to set up each iPad separately. You will notice that they have separate names for that very purpose.
There is no problem with multiple Apple IDs on the same iTunes on the same computer except... Apps are permanently associated with the ID that was originally used to obtain them. If you choose to update an app from inside iTunes and you're logged into the "wrong" ID, you must log out and back in again.
On the bright side, you can configure either or both iPads to sync with apps and music and movies, etc. from either or both IDs. Further, if you choose to update the apps from the iPads themselves, there is no need to log out/in. The device handles that. All you need is the correct password. In my case, I use the same password for both IDs to make things easier.

If I use the new sync-function, I keep losing my bookmarks or at least some of them during syncronisation. Is the new sync just as bad as the old one?

Just like with the old version of Firefox Sync I keep losing at least parts of my bookmarks when I'm using the new Sync version.
Anytime I change any of my bookmarks on one of my computers, I not only miss the change on other computers, but I also loose parts of the original bookmarks as well.
To me it seems that the new Sync is no better than the old one?

When you switched over to the new account, when you set it up the profile was blank and the name was: "uglings Firefox auf home1-ugling". Then on another login for the same computer, the name on the account was the same, so you changed the name.
So when you added bookmarks on the newly named computer account (the restricted account), all of the bookmark folders disappeared.
Summary for clarification, sorry for the repetitiveness.
STR:
# unlink account from old sync
# create new windows account on same computer
# on new account create sync account that has a blank profile and wait to sync. name is CILBMHVM6DT
# go to the previous windows account and add the new sync account to the old profile. (i did get a warning that there was an older account that was signed into, but I hit sync anyway) name was WIN-CILBMHVM6DT
# Wait for it to sync.
# rename the computer name associated with sync on old profile because it has the same name.(renamed old one to WIN-2)
# Add bookmarks to new windows account
# Go back to old windows account and see the new folder, but some previous folders are missing and bookmarks are out of their original folder.
Expected:
Merged folders to remain same file structure
Results:
Some bookmarks are not in folders that no longer appear in the bookmarks toolbar folder.
2 accounts on the same computer connected to the same Firefox Sync account had the same name and deleted some bookmark folders.
I filed a bug on this:
[https://bugzilla.mozilla.org/show_bug.cgi?id=1046954]
However in the meantime we can only recreated the folders that are missing on the accounts that you have set up. If this happens again, I will ask if it has to do with the unique identifier of each device attached to an account (I am assuming that its just the name that we renamed) But please also continue the discussion for this in the bug.
Thank you!

I have two iPads. With two functioning iPads. Is it possible (on the same ID) to sync two of them differently with the same account. So I want to use the new iPad for all my current functions. The old iPad for just my music collection?

I have two iPads. With two functioning iPads. Is it possible (on the same ID) to sync two of them differently with the same account. So I want to use the new iPad for all my current functions. The old iPad for just my music collection and remove all the other stuff?

Very easily. I have an iPod touch and iPad on the same account with totally different content.
If you use iTunes, connect each iPad to your computer and open iTunes and deselect any automatic updating/syncing. If you don't sync with iTunes but have them set up independently, under the settings, App Store, turn off automatic downloads for apps, etc.
I'm old fashioned, I set up and sync my iPad and iPod to my computer and iTunes. Each device has a different name and I manage content manually and only allow sharing on what I want shared.

Hot sync says Palm Zire has successfully synced but no data (using Windows 7 32 bit)

We have a Win XP desktop on which an older version of Palm Desktop has been working for years and been able to sync with my Palm Zire and my husband's Palm Z22. Now that we have to decomission Win XP desktop have installed Palm Desktop by Access v6.2.2 and Hotsync v7.0.2 on Win 7 32bit laptop.
My husband has a Palm Z22 and has had no problems setting up user and syncing using Palm Desktop by Access when using Windows 7. However, although the Palm Desktop has correctly indentified by device as a Zire and hotsync via cable says it completes successfully no data appears on the Desktop. In reverse, when I add a new contact on Palm Desktop and sync it does not appear on the handheld.
Have tried downloading and installing driver from:
http://aceeca.com/support/sales-support/downloads/product/drivers-32-bit-usb-windows-driver-for-palm...
However, when I followed the instructions provided with teh 64 bit download my laptop said I already had most up to date driver!
Please help as I rely on my Zire and need it to back up successfully.

Hello, and Welcome to the HP Support Community!
The Aceeca drivers are ONLY for 64-bit Operating Systems. Since yours is 32-bit, it's not needed.
Try right-clicking on the shortcut for Palm Desktop, then choose "Run as Administrator". See if the data appears.
Another suggestion would be to turn off "UAC" or User Access Control. Control Panel/Users/Turn off UAC.
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Hot sync using a new name?

Similar Messages

Maybe you are looking for