"Hot" USB Ports

I would like to be able to charge my iPhone or iPod while connected to the iBook at night. However I would prefer the charging method to work in "Sleep Mode" or when the computer is shut down. Has anyone had any success with finding an after-market provider or a solution to get "Hot USB" ports installed on the iBook G4's? "Hot" USB Ports meaning; a port always supplying electrical regardless of the computers on/off switch. I heard in passing this feature would be available soon on the newer Apple notebooks but have yet to see it.

There are a couple of very simple solutions.
(1) Buy an iPhone/iPod charger. There are a LOT of inexpensive ones available.
(2) Buy a powered USB hub. That should charge the iPhone/iPod regardless of whether the iBook is on or not. I haven't tried this with a USB hub but have used it for years with my older iPod and a Firewire hub.

Similar Messages

  • Charging peripherals while iBook in Sleep Mode or Shut Down (Hot USB Ports)

    I would like to be able to charge my iPhone or iPhone while connected to the iBook. However I would prefer the charging method to work in "Sleep Mode" or when the computer is shut down, still plugged into a wall outlet. Has anyone had any success with finding an after-market provider or a solution to get "Hot USB" ports installed on the iBook G4's? I heard in passing this feature would be available soon on the newer Apple notebooks but have yet to see it.

    This isn't something I'd noticed before, but my goodness, you're right!
    I'm certain I was able to charge my third gen iPod while it was plugged into my sleeping iBook, as long as the iBook was also connected to an outlet.
    My MacBook, while sleeping, will charge a device regardless of if it's connected to the outlet or not.
    What OS is your iBook running? Maybe that's a clue to solving this issue.

  • My usb port not work and hot usb port aria please help me

    my usb port not work and hot usb port aria please help me

    Please find the link givenbelow might help you to fix your issue.
    USB Device Troubleshooting
    Fix Windows 7 “USB Device Not Recognized” Error
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****

  • Dead USB port running hot

    I have a mid-2010 white unibody MacBook. It's been running fine, with the exception of a problem with the dashboard after the most recent firmware upgrade about a year ago. I just learned to work around it. But then Friday I got an error saying the the USB port was drawing too much power and was shut down. Sudden and random, as it had never happened before and showed up as I woke it up from screensaver mode. Nothing was plugged in. I have a Magic Trackpad and a Logitech keyboard connected via Bluetooth. Disconnecting them doesn't affect the error. I've tried rebooting and resetting PRAM & SMC. I'm trying to reinstall Lion, but I don't think it's a clean or fresh install. Has anyone encountered a USB port that dies but runs hot? The CPU seems to run a lot warmer than usual, buy about 20° F.
    Any help is appreciated!

    Take a look at this discussion:
    I recommend you make an appointment at an Apple genius bar and take the Mac in for a free diagnosis.

  • Is the Enhanced USB Port Replicator Really Hot-Pluggable?

    I have the T61 and am just getting to know the very nice Enhanced USB Port Replicator.  We have a wireless KB/mouse, video and external hard drive, as well as the ethernet cable, all plugged in.
    SITUATION "HOT PLUGGABLE":  The somewhat sparse documentation (that's probably a good thing, if it works as advertised) says that the whole thing is "hot pluggable", and specifically mentions hard drives.  The implication is you don't have to turn your laptop off to disconnect.  WOW, a huge time saver (and a distinction with the Dell laptop I have at work, with a docking station that corrupts the files if you don't shut everything down before disconnecting).
    BUT SEAGATE HAS WARNING:  Seagate documentation for the popular FreeAgent Pro line of stylish external hard drives says that you absolutely MUST execute the Vista "USB safe removal" gambit in order to prevent file corruption -- or even partition corruption on your external drive.  THEN THEY EVEN SUGGESTION UNPLUGGING THE DATA AND POWER CABLES.  This is now in the realm of fantasy as well as inconvenience.  Which leads me to think that the documentation was written by a lawyer and not a technical person.
    WHAT DO YOU THINK?  Is the new "Enhanced USB technology", which is written about on USB resource sites, capable of providing true, safe storage hot pluggability?
    FOOTNOTE:  I'd like to believe the thing is truly hot-pluggable.  I'm just wondering if there are any open files related to the whole real-time backup thing from the Seagate software, if this would cause a problem.  Is the USB smart enough to handle that?
    Thanks for any advice.
    Go to Solution.

    download the keyboard customiser software, in which you can assign a certain key to function as the Fn key on the laptop keyboard. After unpacking go to your driver/swtool folder and then install it from there.

  • While charging my ipad when i plugged in the adapter, the adapter and the usb port gets very very hot... Is this normal? I replaced my ipad and adapter but the problem still exist.

    While i charge my ipad with adapter the adapter more specifically the internal round cell of adapter and the usb port becomes very very hot... And ultimately my ipad back starts heating a bit. Is that normal?

    Take your charger, cable & iPad to an Apple Store for evaluation.
    The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    How to Calibrate Your Mac, iPhone, or iPad Battery
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
    Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
    Extend iPad Battery Life (Look at pjl123 comment)
    New iPad Slow to Recharge, Barely Charges During Use
    http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
    Tips About Charging for New iPad 3
    http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
    Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
     Cheers, Tom

  • Need help one USB Port on MacBook Pro not working

    Its been a weak now and im getting tired of my MacBook pro USB not reading anything.. It wont read/connect usb drives, IPods/IPhones/IPads, and Android phones. I have tried the PRAM and SMC resets and nothing has worked i even left my Macbook pro off for a whole day. ITS ONLY ONE PORT NOT WORKING, i took it to bestbuy because its closest to me but geek squad just did what i explained above and told me get a USB hub and NO! i want to fix this issue... Anyone has had this happen can you let me know if its because the USB port is no longer working or a software issue... Also i keep getting this notification telling me USB devices disabled draining to much power but i have nothing connected!!
    ps- my MacBook Pro is getting very hot fast and it happens when im not even using it, i get home and it very hot could there be another hardware failure i dont leave applications open when i sleep it.

    It sounds like you might have a hardware problem. Your best bet is to go to the Genius Bar. The evaluation is free, and they'll fix it if you're under Applecare. Back up your stuff first though.

  • USB ports are not working and I can't figure out what to do!

    My laptop is a HP Pavilion dv4-1225dx Entertainment Notebook. I've had it for almost three years now. It is running Windows Vista, the same it came with. The problem has only just recently started or was just discovered.
    My problem is that the two USB ports in the side do nothing when something is plugged into them. The metal part of the USB devices gets hot but no lights come on the flashdrive and the camera doesn't act like it is plugged in at all. I've looked through Device Manager and it says they are working fine and the correct driver is installed already. There is also no older driver to rollback to. I've tried deleting them, disabling them, and everything that has been suggested online. I even flashed my BIOS from F.33 to F.55, whatever that means, and still nothing.
    Does anyone know how to fix this problem? I am a filmmaker and desperatley need my USB ports. Any help would be appreciated greatly

    USB ports must be enabled in order for them to work. If you disabled them it is possible that they still are disabled.
    If that is the case, have you tried any of these? http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00820529&tmp_task=solveCategory&lc=en&dlc=en&cc...
    By the way, even though Windows XP troubleshooting may not seem to apply to your situation, sometimes these sorts of errors and problems still happen in Windows Vista. It is rarer but it still happens. One Windows XP based solution can be found here: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00035365&tmp_task=solveCategory&lc=en&dlc=en&cc...
    Also, take a look at power management settings for your USB hub and/or USB ports. If they are enabled, try going to Computer Management, Device Manager, and then right click on the USB ports and select Properties. Following this, click the Power Management tab and uncheck the option "Allow the computer to turn off this device to save power" and click OK and exit out of Device Manager.
    Odd as it seems, sometimes a restart is necessary for this to work completely.
    Also, if you have tried removing the USB Hub drivers according to HP methods, you need to make sure that nothing is plugged into the Ports when you remove them. Often, a restart still is necessary even if some techs do not think to instruct you to do so. After a restart, allow the drivers to reinstall--all of them. Sometimes you still will need to restart your computer again afterward. This sometimes takes a few minutes. But, you must in any case make sure that nothing is plugged into the ports.
    You may also want to check to see if your computer has specific drivers for your USB ports rather than the generic ones. If so, running the option for restoring drivers in HP Application Recovery will fix this. If they are there you will see the USB drivers listed.
    On rare occasion, there is a problem with a device further down the tree than the USB ports and/or USB hubs themselves. These problems are most often fixed by removing the device that controls the USB Hub, such as the devices attached to the PCI Bus and connected to the USB. You will see where these are connected by changing the view to "Devices by Connection" rather than the "Devices by Type" option.
    Let me know your status, please, after you have tried these options. If you have already tried them all out, let me know that, too and we can see if there is another option for you to try.

  • Using a PCI card INTERNAL USB port

    Hello to anyone reading this !
    I've just installed a PCI card in my G5 in order to add more USB ports. When I started searching for one, i was surprised to see most had an internal port, I couldn't really see the use of that. A friend told me it can be used on PCs to plug an extension towards a free port in front of the main unit.
    Considering i can't do this on my G5, I was wondering how to take advantage of this internal port and I'd like to know if I can plug my USB Bluetooth adapter, as it doens't need to be visible and it would free one of my external ports. The question is, are there some security restrictions regarding what you put INSIDE the unit? Isn't it too hot inside to leave the bluetooth key or anything else that is not designed to be inside?
    Does anyone have any advice?
    Thanks in advance

    With all the airflow in a G5, I don't think heat will be a problem, but a Bluetooth unit probably will not be useful inside a shielded metal case. The Apple Bluetooth card connects to an antenna wire that goes outside the shielded section, but I don't think there is any way to connect that wire to the USB Bluetooth module.

  • Acer C710 - USB Ports not working with patched kernel

    I have an...
    Acer C710-844G01ii
    I have replaced the original SSD with a Mushkin 120GB SSD (MKNSSDCR120GB-7)
    I've used John Lewis' script at https://johnlewis.ie to flash the firmware. It works great. It loads 64 bit dual arch iso (2014.10.01) written to a USB flashdrive (Well, I'm actually using SD card in a USB reader. Not sure if that makes a difference) without having to utilize the workaround listed on the Chromebook wiki page (https://wiki.archlinux.org/index.php/Ch … stallation). I just create a regular arch bootable usb and it seems to work fine. I can use the bootable USB tools. I can install arch to the hard disk fine. (I did this a couple of times on the original SSD that came with the chromebook before I replaced it, so I know it works without having to change the SSD).
    The problem I'm having occurs after I install the patched kernel (linux-chromebook-3.16.4-1-x86_64 or linux-mainline-chromebook-3.17-1-x86_64 I've tried them both. Both times I wiped the hard drive and went through the entire install process from scratch). After booting, everything loads up fine except that I lose functionality of my USB ports. The custom BIOS still reads the arch bootable USB if I choose to boot into it. If I boot from the hard drive though, as soon as the patched kernel loads, the USB ports are not working.
    The output of
    dmesg | tail
    is the same before and after inserting a flash drive into a usb port.
    Running the command
    gives output
    unable to initialize libusb: -99

    Updated the system, now using arch kernel 3.17.1-1
    Problem still exists.
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.17.1-1-ARCH ([email protected]_64-tobias) (gcc version 4.9.1 20140903 (prerelease) (GCC) ) #1 SMP PREEMPT Wed Oct 15 15:04:35 CEST 2014
    [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=572dffe4-4501-4df5-967f-c535313cfa24 rw quiet
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000acee3fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000acee4000-0x00000000af9fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000014f5fffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.7 present.
    [ 0.000000] DMI: Google Parrot/Parrot, BIOS 4.0-6588-g4acd8ea-dirty 09/04/2014
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] AGP: No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x14f600 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: write-back
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-FFFFF write-back
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 0AD000000 mask FFF000000 uncachable
    [ 0.000000] 1 base 0AE000000 mask FFE000000 uncachable
    [ 0.000000] 2 base 0B0000000 mask FF0000000 uncachable
    [ 0.000000] 3 base 0C0000000 mask FF0000000 uncachable
    [ 0.000000] 4 base 0D0000000 mask FF0000000 write-combining
    [ 0.000000] 5 base 0E0000000 mask FE0000000 uncachable
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] 8 disabled
    [ 0.000000] 9 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: last_pfn = 0xacee4 max_arch_pfn = 0x400000000
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
    [ 0.000000] reserving inaccessible SNB gfx pages
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b2f000, 0x01b2ffff] PGTABLE
    [ 0.000000] BRK [0x01b30000, 0x01b30fff] PGTABLE
    [ 0.000000] BRK [0x01b31000, 0x01b31fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x14f400000-0x14f5fffff]
    [ 0.000000] [mem 0x14f400000-0x14f5fffff] page 2M
    [ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x14c000000-0x14f3fffff]
    [ 0.000000] [mem 0x14c000000-0x14f3fffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x14bffffff]
    [ 0.000000] [mem 0x100000000-0x14bffffff] page 2M
    [ 0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff]
    [ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x40200000-0xacee3fff]
    [ 0.000000] [mem 0x40200000-0xacdfffff] page 2M
    [ 0.000000] [mem 0xace00000-0xacee3fff] page 4k
    [ 0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE
    [ 0.000000] RAMDISK: [mem 0x379a0000-0x37cc7fff]
    [ 0.000000] ACPI: Early table checksum verification disabled
    [ 0.000000] ACPI: RSDP 0x00000000000F6DD0 000024 (v02 CORE )
    [ 0.000000] ACPI: XSDT 0x00000000ACFEF0E0 00004C (v01 CORE COREBOOT 00000000 CORE 00000000)
    [ 0.000000] ACPI: FACP 0x00000000ACFF2720 0000F4 (v03 CORE COREBOOT 00000000 CORE 00000001)
    [ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/64 (20140724/tbfadt-618)
    [ 0.000000] ACPI: DSDT 0x00000000ACFEF250 0034C7 (v02 COREv4 COREBOOT 20110725 INTL 20140114)
    [ 0.000000] ACPI: FACS 0x00000000ACFEF210 000040
    [ 0.000000] ACPI: HPET 0x00000000ACFF2820 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
    [ 0.000000] ACPI: APIC 0x00000000ACFF2860 00005C (v01 CORE COREBOOT 00000000 CORE 00000000)
    [ 0.000000] ACPI: MCFG 0x00000000ACFF28C0 00003C (v01 CORE COREBOOT 00000000 CORE 00000000)
    [ 0.000000] ACPI: SSDT 0x00000000ACFF3900 000818 (v02 CORE COREBOOT 0000002A CORE 0000002A)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000014f5fffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x14f5fffff]
    [ 0.000000] NODE_DATA [mem 0x14f5fa000-0x14f5fdfff]
    [ 0.000000] [ffffea0000000000-ffffea00053fffff] PMD -> [ffff88014ac00000-ffff88014ebfffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x14f5fffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x0009efff]
    [ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
    [ 0.000000] node 0: [mem 0x20200000-0x3fffffff]
    [ 0.000000] node 0: [mem 0x40200000-0xacee3fff]
    [ 0.000000] node 0: [mem 0x100000000-0x14f5fffff]
    [ 0.000000] On node 0 totalpages: 1032322
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 158 pages reserved
    [ 0.000000] DMA zone: 3998 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 10988 pages used for memmap
    [ 0.000000] DMA32 zone: 703204 pages, LIFO batch:31
    [ 0.000000] Normal zone: 5080 pages used for memmap
    [ 0.000000] Normal zone: 325120 pages, LIFO batch:31
    [ 0.000000] Reserving Intel graphics stolen memory at 0xada00000-0xaf9fffff
    [ 0.000000] ACPI: PM-Timer IO Port: 0x508
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xacee4000-0xaf9fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xafa00000-0xefffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xffffffff]
    [ 0.000000] e820: [mem 0xafa00000-0xefffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:2 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88014f200000 s86848 r8192 d23744 u1048576
    [ 0.000000] pcpu-alloc: s86848 r8192 d23744 u1048576 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1016032
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=572dffe4-4501-4df5-967f-c535313cfa24 rw quiet
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240 using standard form
    [ 0.000000] AGP: Checking aperture...
    [ 0.000000] AGP: No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 3981852K/4129288K available (5381K kernel code, 909K rwdata, 1712K rodata, 1140K init, 1176K bss, 147436K reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=2.
    [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
    [ 0.000000] NR_IRQS:8448 nr_irqs:440 0
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 16777216 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.000000] tsc: Detected 1097.469 MHz processor
    [ 0.000073] Calibrating delay loop (skipped), value calculated using timer frequency.. 2195.39 BogoMIPS (lpj=3658230)
    [ 0.000078] pid_max: default: 32768 minimum: 301
    [ 0.000089] ACPI: Core revision 20140724
    [ 0.005690] ACPI: All ACPI Tables successfully acquired
    [ 0.008808] Security Framework initialized
    [ 0.008819] Yama: becoming mindful.
    [ 0.009391] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.011193] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.012001] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
    [ 0.012017] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
    [ 0.012360] Initializing cgroup subsys memory
    [ 0.012370] Initializing cgroup subsys devices
    [ 0.012374] Initializing cgroup subsys freezer
    [ 0.012378] Initializing cgroup subsys net_cls
    [ 0.012382] Initializing cgroup subsys blkio
    [ 0.012420] CPU: Physical Processor ID: 0
    [ 0.012422] CPU: Processor Core ID: 0
    [ 0.012432] mce: CPU supports 7 MCE banks
    [ 0.012454] CPU0: Thermal monitoring enabled (TM1)
    [ 0.012472] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
    Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
    [ 0.012675] Freeing SMP alternatives memory: 20K (ffffffff81a02000 - ffffffff81a07000)
    [ 0.014781] ftrace: allocating 20674 entries in 81 pages
    [ 0.037109] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.070117] smpboot: CPU0: Intel(R) Celeron(R) CPU 847 @ 1.10GHz (fam: 06, model: 2a, stepping: 07)
    [ 0.070132] TSC deadline timer enabled
    [ 0.070178] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
    [ 0.070223] ... version: 3
    [ 0.070226] ... bit width: 48
    [ 0.070228] ... generic registers: 8
    [ 0.070230] ... value mask: 0000ffffffffffff
    [ 0.070232] ... max period: 0000ffffffffffff
    [ 0.070234] ... fixed-purpose events: 3
    [ 0.070237] ... event mask: 00000007000000ff
    [ 0.090307] x86: Booting SMP configuration:
    [ 0.090312] .... node #0, CPUs: #1
    [ 0.103535] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.103559] x86: Booted up 1 node, 2 CPUs
    [ 0.103563] smpboot: Total of 2 processors activated (4391.78 BogoMIPS)
    [ 0.105926] devtmpfs: initialized
    [ 0.112736] pinctrl core: initialized pinctrl subsystem
    [ 0.112812] RTC time: 0:25:43, date: 10/27/14
    [ 0.112986] NET: Registered protocol family 16
    [ 0.113224] cpuidle: using governor ladder
    [ 0.113230] cpuidle: using governor menu
    [ 0.113291] ACPI: bus type PCI registered
    [ 0.113295] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.113438] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
    [ 0.113443] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
    [ 0.113650] PCI: Using configuration type 1 for base access
    [ 0.124189] ACPI: Added _OSI(Module Device)
    [ 0.124193] ACPI: Added _OSI(Processor Device)
    [ 0.124196] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.124199] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.130313] ACPI: Interpreter enabled
    [ 0.130327] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140724/hwxface-580)
    [ 0.130336] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140724/hwxface-580)
    [ 0.130364] ACPI: (supports S0 S3 S4 S5)
    [ 0.130367] ACPI: Using IOAPIC for interrupt routing
    [ 0.130407] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.136949] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.136960] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    [ 0.137053] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
    [ 0.137240] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000cedff])
    [ 0.137249] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
    [ 0.137502] PCI host bridge to bus 0000:00
    [ 0.137507] pci_bus 0000:00: root bus resource [bus 00-ff]
    [ 0.137512] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.137515] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.137519] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.137523] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
    [ 0.137526] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
    [ 0.137529] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
    [ 0.137533] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
    [ 0.137536] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
    [ 0.137540] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
    [ 0.137543] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
    [ 0.137547] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
    [ 0.137550] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
    [ 0.137553] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
    [ 0.137557] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
    [ 0.137560] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
    [ 0.137564] pci_bus 0000:00: root bus resource [mem 0xafa00000-0xfebfffff]
    [ 0.137567] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
    [ 0.137583] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
    [ 0.137752] pci 0000:00:02.0: [8086:0106] type 00 class 0x030000
    [ 0.137774] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe03fffff 64bit]
    [ 0.137786] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.137796] pci 0000:00:02.0: reg 0x20: [io 0x1000-0x103f]
    [ 0.138004] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
    [ 0.138046] pci 0000:00:16.0: reg 0x10: [mem 0xe0706100-0xe070610f 64bit]
    [ 0.138188] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 0.138353] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
    [ 0.138392] pci 0000:00:1a.0: reg 0x10: [mem 0xe0705800-0xe0705bff]
    [ 0.138555] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 0.138624] pci 0000:00:1a.0: System wakeup disabled by ACPI
    [ 0.138714] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
    [ 0.138746] pci 0000:00:1b.0: reg 0x10: [mem 0xe0700000-0xe0703fff 64bit]
    [ 0.138900] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.138967] pci 0000:00:1b.0: System wakeup disabled by ACPI
    [ 0.139051] pci 0000:00:1c.0: [8086:1e12] type 01 class 0x060400
    [ 0.139207] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.139354] pci 0000:00:1c.1: [8086:1e14] type 01 class 0x060400
    [ 0.139506] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 0.139671] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
    [ 0.139708] pci 0000:00:1d.0: reg 0x10: [mem 0xe0705c00-0xe0705fff]
    [ 0.139869] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 0.139938] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 0.140021] pci 0000:00:1f.0: [8086:1e5f] type 00 class 0x060100
    [ 0.140331] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
    [ 0.140373] pci 0000:00:1f.2: reg 0x10: [io 0x1060-0x1067]
    [ 0.140391] pci 0000:00:1f.2: reg 0x14: [io 0x1070-0x1073]
    [ 0.140409] pci 0000:00:1f.2: reg 0x18: [io 0x1068-0x106f]
    [ 0.140427] pci 0000:00:1f.2: reg 0x1c: [io 0x1074-0x1077]
    [ 0.140444] pci 0000:00:1f.2: reg 0x20: [io 0x1040-0x105f]
    [ 0.140461] pci 0000:00:1f.2: reg 0x24: [mem 0xe0705000-0xe07057ff]
    [ 0.140568] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.140707] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
    [ 0.140738] pci 0000:00:1f.3: reg 0x10: [mem 0xe0706000-0xe07060ff 64bit]
    [ 0.140781] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
    [ 0.140941] pci 0000:00:1f.6: [8086:1e24] type 00 class 0x118000
    [ 0.140981] pci 0000:00:1f.6: reg 0x10: [mem 0xe0704000-0xe0704fff 64bit]
    [ 0.141361] pci 0000:01:00.0: [168c:0034] type 00 class 0x028000
    [ 0.141432] pci 0000:01:00.0: reg 0x10: [mem 0xe0400000-0xe047ffff 64bit]
    [ 0.141586] pci 0000:01:00.0: reg 0x30: [mem 0xe0480000-0xe048ffff pref]
    [ 0.141772] pci 0000:01:00.0: supports D1 D2
    [ 0.141776] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.146966] pci 0000:00:1c.0: PCI bridge to [bus 01]
    [ 0.146982] pci 0000:00:1c.0: bridge window [mem 0xe0400000-0xe04fffff]
    [ 0.147186] pci 0000:02:00.0: [14e4:16b5] type 00 class 0x020000
    [ 0.147261] pci 0000:02:00.0: reg 0x10: [mem 0xe0500000-0xe050ffff 64bit pref]
    [ 0.147314] pci 0000:02:00.0: reg 0x18: [mem 0xe0510000-0xe051ffff 64bit pref]
    [ 0.147412] pci 0000:02:00.0: reg 0x30: [mem 0xe0600000-0xe06007ff pref]
    [ 0.147646] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
    [ 0.147839] pci 0000:02:00.1: [14e4:16bc] type 00 class 0x080501
    [ 0.147913] pci 0000:02:00.1: reg 0x10: [mem 0xe0520000-0xe052ffff 64bit pref]
    [ 0.148270] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold
    [ 0.153657] pci 0000:00:1c.1: PCI bridge to [bus 02]
    [ 0.153672] pci 0000:00:1c.1: bridge window [mem 0xe0600000-0xe06fffff]
    [ 0.153686] pci 0000:00:1c.1: bridge window [mem 0xe0500000-0xe05fffff 64bit pref]
    [ 0.153903] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11, disabled.
    [ 0.153995] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10, disabled.
    [ 0.154081] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11, disabled.
    [ 0.154165] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15), disabled.
    [ 0.154248] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11, disabled.
    [ 0.154330] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
    [ 0.154413] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
    [ 0.154495] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
    [ 0.155375] ACPI: Enabled 1 GPEs in block 00 to 3F
    [ 0.155452] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
    [ 0.155654] vgaarb: setting as boot device: PCI:0000:00:02.0
    [ 0.155658] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.155664] vgaarb: loaded
    [ 0.155666] vgaarb: bridge control possible 0000:00:02.0
    [ 0.155751] PCI: Using ACPI for IRQ routing
    [ 0.159478] PCI: pci_cache_line_size set to 64 bytes
    [ 0.159577] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
    [ 0.159581] e820: reserve RAM buffer [mem 0xacee4000-0xafffffff]
    [ 0.159584] e820: reserve RAM buffer [mem 0x14f600000-0x14fffffff]
    [ 0.159796] NetLabel: Initializing
    [ 0.159799] NetLabel: domain hash size = 128
    [ 0.159801] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.159829] NetLabel: unlabeled traffic allowed by default
    [ 0.159874] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 0.159885] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 0.161931] Switched to clocksource hpet
    [ 0.171668] pnp: PnP ACPI init
    [ 0.171847] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.171852] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
    [ 0.171857] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 0.171861] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 0.171865] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
    [ 0.171869] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.171873] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
    [ 0.171877] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
    [ 0.171881] system 00:00: [mem 0x20000000-0x201fffff] has been reserved
    [ 0.171885] system 00:00: [mem 0x40000000-0x401fffff] has been reserved
    [ 0.171891] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.172584] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
    [ 0.172590] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
    [ 0.172671] system 00:02: [io 0x0500-0x057f] could not be reserved
    [ 0.172676] system 00:02: [io 0x0480-0x04bf] has been reserved
    [ 0.172681] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.172727] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.172802] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
    [ 0.172844] pnp: PnP ACPI: found 5 devices
    [ 0.181140] pci 0000:00:1c.0: PCI bridge to [bus 01]
    [ 0.181153] pci 0000:00:1c.0: bridge window [mem 0xe0400000-0xe04fffff]
    [ 0.181169] pci 0000:00:1c.1: PCI bridge to [bus 02]
    [ 0.181179] pci 0000:00:1c.1: bridge window [mem 0xe0600000-0xe06fffff]
    [ 0.181187] pci 0000:00:1c.1: bridge window [mem 0xe0500000-0xe05fffff 64bit pref]
    [ 0.181201] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.181205] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.181209] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.181212] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
    [ 0.181216] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
    [ 0.181219] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
    [ 0.181223] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff]
    [ 0.181226] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff]
    [ 0.181230] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff]
    [ 0.181233] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff]
    [ 0.181237] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff]
    [ 0.181240] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff]
    [ 0.181243] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff]
    [ 0.181247] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff]
    [ 0.181250] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff]
    [ 0.181254] pci_bus 0000:00: resource 19 [mem 0xafa00000-0xfebfffff]
    [ 0.181257] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed44fff]
    [ 0.181262] pci_bus 0000:01: resource 1 [mem 0xe0400000-0xe04fffff]
    [ 0.181266] pci_bus 0000:02: resource 1 [mem 0xe0600000-0xe06fffff]
    [ 0.181269] pci_bus 0000:02: resource 2 [mem 0xe0500000-0xe05fffff 64bit pref]
    [ 0.181319] NET: Registered protocol family 2
    [ 0.181671] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
    [ 0.181835] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
    [ 0.181980] TCP: Hash tables configured (established 32768 bind 32768)
    [ 0.182017] TCP: reno registered
    [ 0.182031] UDP hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.182066] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.182162] NET: Registered protocol family 1
    [ 0.182192] pci 0000:00:02.0: Video device with shadowed ROM
    [ 0.182773] PCI: CLS 64 bytes, default 64
    [ 0.182860] Unpacking initramfs...
    [ 0.302677] Freeing initrd memory: 3232K (ffff8800379a0000 - ffff880037cc8000)
    [ 0.302693] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 0.302698] software IO TLB [mem 0xa8ee4000-0xacee4000] (64MB) mapped at [ffff8800a8ee4000-ffff8800acee3fff]
    [ 0.302960] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
    [ 0.303038] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x28
    [ 0.303051] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x28
    [ 0.303148] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 0.303201] Scanning for low memory corruption every 60 seconds
    [ 0.303637] futex hash table entries: 512 (order: 3, 32768 bytes)
    [ 0.303657] Initialise system trusted keyring
    [ 0.304287] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.307213] zpool: loaded
    [ 0.307219] zbud: loaded
    [ 0.307572] VFS: Disk quotas dquot_6.5.2
    [ 0.307644] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.307867] msgmni has been set to 7783
    [ 0.307975] Key type big_key registered
    [ 0.308262] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.308317] io scheduler noop registered
    [ 0.308322] io scheduler deadline registered
    [ 0.308380] io scheduler cfq registered (default)
    [ 0.308697] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
    [ 0.308978] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
    [ 0.309161] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
    [ 0.309165] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
    [ 0.309172] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
    [ 0.309208] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
    [ 0.309212] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
    [ 0.309215] pci 0000:02:00.1: Signaling PME through PCIe PME interrupt
    [ 0.309223] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
    [ 0.309253] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 0.309285] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 0.309344] vesafb: mode is 1366x768x32, linelength=5504, pages=0
    [ 0.309346] vesafb: scrolling: redraw
    [ 0.309350] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 0.309380] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90004780000, using 4160k, total 4160k
    [ 0.315773] Console: switching to colour frame buffer device 170x48
    [ 0.321847] fb0: VESA VGA frame buffer device
    [ 0.321882] intel_idle: MWAIT substates: 0x21120
    [ 0.321884] intel_idle: v0.4 model 0x2A
    [ 0.321887] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 0.322122] GHES: HEST is not enabled!
    [ 0.322261] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.323099] Linux agpgart interface v0.103
    [ 0.323175] rtc_cmos 00:03: RTC can wake from S4
    [ 0.323405] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
    [ 0.323444] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
    [ 0.323464] Intel P-state driver initializing.
    [ 0.323700] ledtrig-cpu: registered to indicate activity on CPUs
    [ 0.323974] TCP: cubic registered
    [ 0.324249] NET: Registered protocol family 10
    [ 0.324810] NET: Registered protocol family 17
    [ 0.325630] Loading compiled-in X.509 certificates
    [ 0.325667] registered taskstats version 1
    [ 0.326469] Magic number: 2:425:406
    [ 0.326624] rtc_cmos 00:03: setting system clock to 2014-10-27 00:25:43 UTC (1414369543)
    [ 0.326771] PM: Hibernation image not present or could not be loaded.
    [ 0.328979] Freeing unused kernel memory: 1140K (ffffffff818e5000 - ffffffff81a02000)
    [ 0.328984] Write protecting the kernel read-only data: 8192k
    [ 0.334234] Freeing unused kernel memory: 752K (ffff880001544000 - ffff880001600000)
    [ 0.336362] Freeing unused kernel memory: 336K (ffff8800017ac000 - ffff880001800000)
    [ 0.352574] random: systemd-tmpfile urandom read with 1 bits of entropy available
    [ 0.355532] systemd-udevd[47]: starting version 216
    [ 0.387858] ACPI: bus type USB registered
    [ 0.387913] usbcore: registered new interface driver usbfs
    [ 0.387936] usbcore: registered new interface driver hub
    [ 0.388039] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
    [ 0.388042] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
    [ 0.391270] usbcore: registered new device driver usb
    [ 0.392129] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 0.392223] sdhci: Secure Digital Host Controller Interface driver
    [ 0.392228] sdhci: Copyright(c) Pierre Ossman
    [ 0.392414] ehci-pci: EHCI PCI platform driver
    [ 0.392656] ehci-pci 0000:00:1a.0: EHCI Host Controller
    [ 0.392671] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
    [ 0.392674] sdhci-pci 0000:02:00.1: SDHCI controller found [14e4:16bc] (rev 10)
    [ 0.392714] ehci-pci 0000:00:1a.0: debug port 2
    [ 0.393158] sdhci-pci 0000:02:00.1: No vmmc regulator found
    [ 0.393163] sdhci-pci 0000:02:00.1: No vqmmc regulator found
    [ 0.395522] mmc0: SDHCI controller on PCI [0000:02:00.1] using ADMA
    [ 0.397372] SCSI subsystem initialized
    [ 0.400613] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
    [ 0.400649] ehci-pci 0000:00:1a.0: irq 21, io mem 0xe0705800
    [ 0.402598] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.402906] libata version 3.00 loaded.
    [ 0.408631] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [ 0.408994] hub 1-0:1.0: USB hub found
    [ 0.409010] hub 1-0:1.0: 3 ports detected
    [ 0.409474] ehci-pci 0000:00:1d.0: EHCI Host Controller
    [ 0.409486] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [ 0.409509] ehci-pci 0000:00:1d.0: debug port 2
    [ 0.413433] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
    [ 0.413449] ehci-pci 0000:00:1d.0: irq 19, io mem 0xe0705c00
    [ 0.421967] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 0.422311] hub 2-0:1.0: USB hub found
    [ 0.422325] hub 2-0:1.0: 3 ports detected
    [ 0.422611] ahci 0000:00:1f.2: version 3.0
    [ 0.422819] ahci 0000:00:1f.2: irq 26 for MSI/MSI-X
    [ 0.422858] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
    [ 0.422890] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x1 impl SATA mode
    [ 0.422896] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst
    [ 0.425306] scsi host0: ahci
    [ 0.427777] scsi host1: ahci
    [ 0.430423] scsi host2: ahci
    [ 0.431139] scsi host3: ahci
    [ 0.431256] ata1: SATA max UDMA/133 abar [email protected] port 0xe0705100 irq 26
    [ 0.431260] ata2: DUMMY
    [ 0.431262] ata3: DUMMY
    [ 0.431265] ata4: DUMMY
    [ 0.475720] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 0.715469] usb 1-1: new high-speed USB device number 2 using ehci-pci
    [ 0.748738] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 0.760911] ata1.00: ATA-8: MKNSSDCR120GB-7, 582ABBF0, max UDMA/133
    [ 0.760921] ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
    [ 0.770881] ata1.00: configured for UDMA/133
    [ 0.771363] scsi 0:0:0:0: Direct-Access ATA MKNSSDCR120GB-7 BBF0 PQ: 0 ANSI: 5
    [ 0.782066] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
    [ 0.782627] sd 0:0:0:0: [sda] Write Protect is off
    [ 0.782637] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 0.782810] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 0.785152] sda: sda1 sda2 sda3
    [ 0.786014] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 0.839907] hub 1-1:1.0: USB hub found
    [ 0.840119] hub 1-1:1.0: 4 ports detected
    [ 0.935913] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    [ 0.945475] usb 2-1: new high-speed USB device number 2 using ehci-pci
    [ 1.069643] hub 2-1:1.0: USB hub found
    [ 1.069827] hub 2-1:1.0: 4 ports detected
    [ 1.148949] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
    [ 1.233928] usb 1-1.1: string descriptor 0 read error: -22
    [ 1.290134] EXT4-fs (sda1): re-mounted. Opts: data=ordered
    [ 1.305272] tsc: Refined TSC clocksource calibration: 1097.506 MHz
    [ 1.315437] usb 1-1.3: new high-speed USB device number 4 using ehci-pci
    [ 1.344309] systemd-udevd[136]: starting version 216
    [ 1.352295] systemd-journald[119]: Received request to flush runtime journal from PID 1
    [ 1.607498] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 1.610413] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
    [ 1.610471] ACPI: Lid Switch [LID0]
    [ 1.610565] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
    [ 1.610572] ACPI: Power Button [PWRB]
    [ 1.610653] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
    [ 1.610657] ACPI: Sleep Button [TPAD]
    [ 1.610758] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
    [ 1.610763] ACPI: Power Button [PWRF]
    [ 1.626490] mei_me 0000:00:16.0: irq 27 for MSI/MSI-X
    [ 1.645724] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
    [ 1.645942] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
    [ 1.653739] thermal LNXTHERM:00: registered as thermal_zone0
    [ 1.653745] ACPI: Thermal Zone [THRM] (0 C)
    [ 1.660772] [Firmware Bug]: battery: (dis)charge rate invalid.
    [ 1.665282] ACPI: Battery Slot [BATX] (battery present)
    [ 1.666038] ACPI: AC Adapter [AC] (on-line)
    [ 1.681337] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000057f (\PMIO) (20140724/utaddress-258)
    [ 1.681351] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 1.681358] ACPI Warning: SystemIO range 0x00000000000004c0-0x00000000000004cf conflicts with OpRegion 0x0000000000000480-0x00000000000004eb (\GPIO) (20140724/utaddress-258)
    [ 1.681364] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 1.681367] ACPI Warning: SystemIO range 0x00000000000004b0-0x00000000000004bf conflicts with OpRegion 0x0000000000000480-0x00000000000004eb (\GPIO) (20140724/utaddress-258)
    [ 1.681374] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 1.681376] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004af conflicts with OpRegion 0x0000000000000480-0x00000000000004eb (\GPIO) (20140724/utaddress-258)
    [ 1.681382] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 1.681385] lpc_ich: Resource conflict(s) found affecting gpio_ich
    [ 1.688249] [drm] Initialized drm 1.1.0 20060810
    [ 1.691201] pps_core: LinuxPPS API ver. 1 registered
    [ 1.691207] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
    [ 1.700706] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
    [ 1.701200] PTP clock support registered
    [ 1.706524] input: PC Speaker as /devices/platform/pcspkr/input/input6
    [ 1.752871] tg3.c:v3.137 (May 11, 2014)
    [ 1.753314] Adding 8167872k swap on /dev/sda2. Priority:-1 extents:1 across:8167872k SSFS
    [ 1.757127] Bluetooth: Core ver 2.19
    [ 1.757151] NET: Registered protocol family 31
    [ 1.757154] Bluetooth: HCI device and connection manager initialized
    [ 1.757166] Bluetooth: HCI socket layer initialized
    [ 1.757170] Bluetooth: L2CAP socket layer initialized
    [ 1.757180] Bluetooth: SCO socket layer initialized
    [ 1.771585] usbcore: registered new interface driver btusb
    [ 1.771864] snd_hda_intel 0000:00:1b.0: irq 28 for MSI/MSI-X
    [ 1.777240] cfg80211: Calling CRDA to update world regulatory domain
    [ 1.812626] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
    [ 1.812635] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
    [ 1.812640] sound hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
    [ 1.812643] sound hdaudioC0D0: mono: mono_out=0x0
    [ 1.812646] sound hdaudioC0D0: inputs:
    [ 1.812650] sound hdaudioC0D0: Internal Mic=0x1b
    [ 1.812654] sound hdaudioC0D0: Mic=0x19
    [ 1.819178] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM57785) rev 57785100] (PCI Express) MAC address 20:89:84:c7:a0:92
    [ 1.819187] tg3 0000:02:00.0 eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
    [ 1.819192] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
    [ 1.819196] tg3 0000:02:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit]
    [ 1.834640] media: Linux media interface: v0.10
    [ 1.845475] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input7
    [ 1.849543] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
    [ 1.850477] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
    [ 1.850623] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
    [ 1.851058] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
    [ 1.851353] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
    [ 1.860140] iTCO_vendor_support: vendor-support=0
    [ 1.861704] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
    [ 1.861764] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0560)
    [ 1.862721] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 1.863690] Linux video capture interface: v2.00
    [ 1.875723] usbcore: registered new interface driver ath3k
    [ 1.914247] tg3 0000:02:00.0 enp2s0f0: renamed from eth0
    [ 1.926001] systemd-udevd[145]: renamed network interface eth0 to enp2s0f0
    [ 1.938186] usb 1-1.1: USB disconnect, device number 3
    [ 1.944872] uvcvideo: Found UVC 1.00 device HD WebCam (04f2:b336)
    [ 1.953353] input: HD WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input13
    [ 1.953679] usbcore: registered new interface driver uvcvideo
    [ 1.953684] USB Video Class driver (1.1.1)
    [ 1.997073] intel_rapl: Found RAPL domain package
    [ 1.997080] intel_rapl: Found RAPL domain core
    [ 1.997083] intel_rapl: Found RAPL domain uncore
    [ 1.999325] [drm] Memory usable by graphics device = 2048M
    [ 1.999330] [drm] Replacing VGA console driver
    [ 1.999337] checking generic (d0000000 410000) vs hw (d0000000 10000000)
    [ 1.999340] fb: switching to inteldrmfb from VESA VGA
    [ 1.999399] Console: switching to colour dummy device 80x25
    [ 2.006114] i915 0000:00:02.0: irq 29 for MSI/MSI-X
    [ 2.006130] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
    [ 2.006133] [drm] Driver supports precise vblank timestamp query.
    [ 2.006275] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
    [ 2.010165] input: Cypress APA Trackpad (cyapa) as /devices/pci0000:00/0000:00:1f.3/i2c-0/0-0067/input/input14
    [ 2.014824] mousedev: PS/2 mouse device common for all mice
    [ 2.037823] ath: phy0: ASPM enabled: 0x43
    [ 2.037831] ath: EEPROM regdomain: 0x6c
    [ 2.037834] ath: EEPROM indicates we should expect a direct regpair map
    [ 2.037838] ath: Country alpha2 being used: 00
    [ 2.037840] ath: Regpair used: 0x6c
    [ 2.044014] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
    [ 2.044617] ieee80211 phy0: Atheros AR9462 Rev:2 mem=0xffffc90004980000, irq=17
    [ 2.050867] ath9k 0000:01:00.0 wlp1s0: renamed from wlan0
    [ 2.054438] fbcon: inteldrmfb (fb0) is primary device
    [ 2.054543] Console: switching to colour frame buffer device 170x48
    [ 2.054559] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
    [ 2.054563] i915 0000:00:02.0: registered panic notifier
    [ 2.066878] systemd-udevd[145]: renamed network interface wlan0 to wlp1s0
    [ 2.070905] [drm] Initialized i915 1.6.0 20140725 for 0000:00:02.0 on minor 0
    [ 2.125455] usb 1-1.1: new full-speed USB device number 5 using ehci-pci
    [ 2.154830] tg3 0000:02:00.0: irq 30 for MSI/MSI-X
    [ 2.154842] tg3 0000:02:00.0: irq 31 for MSI/MSI-X
    [ 2.154849] tg3 0000:02:00.0: irq 32 for MSI/MSI-X
    [ 2.714571] Switched to clocksource tsc
    [ 2.714588] IPv6: ADDRCONF(NETDEV_UP): enp2s0f0: link is not ready
    [ 2.731648] usb 1-1.1: string descriptor 0 read error: -22
    [ 2.850571] random: nonblocking pool is initialized
    Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
    Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 001 Device 004: ID 04f2:b336 Chicony Electronics Co., Ltd
    Bus 001 Device 005: ID 0489:e04e Foxconn / Hon Hai
    Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

  • Where are my USB ports?

    I have four USB ports, all of which work under Windows.  What are the device names in Arch Linux?  I am looking at the directory of /dev and I see nothing with a USB prefix, nor with a SCSI prefix (I vaguely recall some distros putting USB under SCSI)
    Not that I understand what I am looking at, but the KDE FSTab tool shows four USB in /proc/bus.
    Thank you

    lanrat wrote:
    You need to plug something in to have for example /dev/sda1, don't you (they are created dynamically) ? :-)
    Nexist, what do you want to know ? If you are using udev look in /etc/udev/rules.d/udev.rules to know what is where in /dev.
    If you just want to know if your usb ports are recognized and working browse dmesg output. It should print something about usb ports when you load your usb module (at least one of the ehci_hcd, uhci_hcd, ohci_hcd). For example:
    ehci_hcd 0000:02:05.2: VIA Technologies, Inc. USB 2.0
    ehci_hcd 0000:02:05.2: irq 5, pci mem 0xde002000
    ehci_hcd 0000:02:05.2: new USB bus registered, assigned bus number 1
    ehci_hcd 0000:02:05.2: USB 2.0 initialized, EHCI 0.95, driver 10 Dec 2004
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 4 ports detected
    I have to run to my parents house, but I have no SDA devices, even with my iomega SuperDVD plugged in, nor does one appear when I plug in the Palm Pilot.  However, I am using a USB mouse just fine -- and yet there is no SDA device for that either.
    How do I check the dmesg log.  Also, I just thought of something when I boot up there is an error loading the Hot Plug module.  If these are created dynamically, that module might be responsible for that....

  • I have a mac book pro that both USB ports have stopped working one about a year ago and one recently. Is it possible to connect to another one of the other MBP's  ports with a cord that ends with a USB port?

    I have a mac book pro that both USB ports have stopped working one about a year ago and one recently. Is it possible to connect to another one of the other MBP's  ports with a cord that ends with a USB port?

    Thank you For your time and thoughts!
    I went by the Apple Store and they told me that there was a "Flat Rate" repair service for this particular part where they would replace the logic board along with the USB ports for $350. Seems like best avenue. All of this would have been moot but my wifi in the computer also doesn't work so I was using my phone as a hot spot and tethering it to the computer for Internet access when the last port quit. This left me with no internet and no printing capabilities on the computer I use for my business. Basically became a nice paperweight. lol
    They will ship it off Monday and I should have it back Thursday!
    Again, thank you!

  • Equium A200-26D - Error code 19 in device manager on USB ports

    I have decided to try Windows 7 but the usb ports don't work in device manager all the usb root hubs have a yellow triangle and the device status says "Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)".
    I've tried uninstalling them through device manager and restarting the computer and downloading and reinstalling the vista drivers, as I can't seem to find Windows 7 drivers, but none of that fixed anything. I was wondering if there was anything else I could try or if I could get a link to the right drivers.

    Firstly I'll state I know first hand that sarcasm and being generally rude via a forum will not get issue's resolved any faster , but I feel raped by Toshiba and 3rd parties and obliged to post
    Lets start at the beginning , that's usually the best place .
    On 2008 I bought a Toshiba , being a 3D artist I thought this would be a great investment .
    But sadly I was wrong .
    Purchased at PC WORLD GLASGOW - for 450 GBP "just for geographical reference "
    Once I had opened the shinny new box and carefully unwrapped the dangerous contents , I switched on my laptop with bated breath........................
    Guess what ?
    3 dead pixels not at the side nor the top but right in the middle .
    Now you can understand my concerns being a graphics artist , but this issue was quickly resolved "After a Huge fight with PC world because there generative manager policy for today was
    " You cant return Unless it had 5 or more dead pixels "
    Ok ,so excellent they swapped it ,after I had to fork out another 50 GBP for an upgraded version because they had none in stock ! .
    So effectively I got another machine that I didn't want for extra money .....superb
    Ok so, I get this machine home , TOSHIBA EQUIUM A210
    everythings fine and dandy for about 1 week
    -At first I notice the DVD drive acting funny , reading discs then not reading them it lost all function except the ability to read ,ok not a problem I have a home PC that can burn discs ,I'll let that one slip .
    the paint on front panel "where the lights are " starts to flake and fall off .
    -Ok I'll put that down to wear and tear but its still only a month old
    C) OVER HEATING (MEGA) Burnt my daughters arm .
    - As I mentioned above I do graphics , this machine main purpose was to browse the internet ,maybe a few world docs , not render out 9 million polyz , I fully understand this concept .
    but it started to overheat , I'm not talking about a little bit warm , I'm talking full on ,that much you could cook an egg on . not only did the machine but also the power pack . remembering this machine is still less than 2 months old .
    The heat was that intense that it burnt a perfect rectangle onto my 3 year old daughters arm .
    -arguing with my wife not to sue for faulty/dangerous electrical goods I phoned customer services up , and spoke to a very nice gentlemen that was happy to help .
    Excellent Laptop getting picked up and taken away to get fixed ----SEE CUSTOMER SERVICES NOTES .
    I was that considerate that I re-formatted the machine ,dragged all the essential tools onto the desktop ,you know control panel , system setting ect . and even made a nice jpeg schematic where the faults are "because I know how much off a pain in the teeth it can be working on the tech side and anything I can do to help "
    1 or 2 weeks later I get my newly refurbished laptop back .
    Superb , or so I thought ...................
    Jump forward 6 months later , just before the manufactures warranty runs out IRONICALLY
    Inbetween random faults and the paint starting to fall of AGAIN ,
    The machine starts to switch its self randomly off ! without prior warning .
    "Ok , maybe it was just a system fault , I'll restore .
    Nope still doing it , Maybe its the battery not holding charge and it's struggling to detect it ?????
    Nope its still cutting out ................
    May I also add after the return off the machine ,which in my professional opp " YOU JUST REPLACED THE SHELL AND BLEW THE DUST OFF " . --------- PLEASE POST CUSTOMER SERVICES NOTES ...."maybe I'm wrong ?"
    Now due to the machine randomly switching it's self off it caused massive corrupt sectors and chkdisk errors and loss of data ."some of which was costly , but functionally I'm an intelligent spices I managed to back MOST data up .
    Ok so not a problem It's getting old (1year and 3weeks to be exact ) , its generally used for Internet ,theres some work and some personal photos ,nothing thats going to rock your world .
    I'll use it for that .
    Now this can be caused by dust ,also quoted by one of your ignorant members of staff .--
    !!!!but this was caused by another mass produced product ,quickly shipped out and grossly missing product user safety testing .....................
    HOW DO I KNOW THIS ::::::::::::::::::::::;
    Mainly because when you Google Toshiba A210 it hits over 3 million user faults / problems
    "Excuse me for sounding like one of your tech guys , but I used google search string to legitimize the search "
    and the evidence is there .
    Ok so its overheating ,thats maybe why it keeps cutting out ?
    not a problem ,not UNTILL TODAY .
    "sorry it took so long to get here "
    So today My daughter "now 4 " is playing on nickjnr home page "Carefully avoiding the hot lava that pours from the heat vent at the side , and it cuts out again ....
    Goto Switch back on
    " A method we now call " PULL THE PLUG OUT AND SWITCH ON AND OFF 5 TIMES ,STAND ON 1 LEG & PRAY .............
    and up pops this
    some here may have seen this before ...................
    THIS IS CAUSED by poor programming and bad development
    BIOS :
    Its called BIOS lock "and yes i did try , TOSHIBA , ADMIN , 12345678 blah blah blah " effectivily the machines decides to encrypt or maybe not encrypt a password , just depends how it feels that day .
    Toshiba know about this fault and offer a fix ##maybe at a price ,just depends on what sales rep you get ##
    This is the whole point of the conversation so If I lost you with bad grammer / spelling at any point in the post please PAY ATTENTION this is the IMPORTANT PART
    ================================================== ==========================
    I searched ways to brute force , fix , remove battery and so on when I decided enough was enough this machine is faulty -------I'm going to give legal jargon here just so you know where on the same page .
    The Sale of Goods Act 1979 as amended
    Goods must be:
    ???????????????¢?????¢??? ??????¢???¬?????¢???????? ???¢fit for the purpose they are made for
    ???????????????¢?????¢??? ??????¢???¬?????¢???????? ???¢safe
    ???????????????¢?????¢??? ??????¢???¬?????¢???????? ???¢durable - last for a reasonable time
    ???????????????¢?????¢??? ??????¢???¬?????¢???????? ???¢have no minor defects
    ???????????????¢?????¢??? ??????¢???¬?????¢???????? ???¢acceptable in look and finish
    There's others if you would like me to continue ,even better ones but I'll just use this one right now , just to be polite .
    Your PRODUCT was faulty since it left the covaor belt , your people should have picked up on this when it got returned but I'm sure they may have been busy ! .
    Now we can argue these points and justifications but ontop all that .................
    this hurts the most .
    "Sorry Mr Scott for the problem you can either wait and we'll send someone out to fix it , OR I QUOTE you can take it to PC WORLD and because there TECHGUYS they will be obliged to fix FOR FREE due to it being purchased there .
    I PHONE SEVERAL PCWORLD NUMBERS UP and bounced there calls try to get an answer before someone on the end says # " Maybe you should take into your local store 15 miles away " ----
    great thinking sherlock
    I GOTO PC WORLD : Yet another human with the capacity of a moth , 300 million sp3rm and that's the one that got threw .
    TELLS ME " We don't do that because we are are not obliged to fix it " ,"But i have a piece of paper with a customer reference that a trusted toshiba services man gave me
    Ok hold my breath walk out and go and phone TOSHIBA up again not a problem ................
    This is where it gets good , I phone you after speaking to another 4 or 5 people on your side .
    When I get to speak to someone that's happy to help but at a price ,who decides to become law and Order roled into one, the conversation gets silly and YOU throw potential threats and jargon around #congrates your grease monkey can read off a pdf document ,well so can mine ,but fortunate she has practiced Law for the last 10 years and is pretty accurate ...
    but again I said Polite so here it is :
    YOUR QUOTE TO FIX YOUR PRODUCT ::: 100 + GBP give or take just depends on how constructive your people decide to be that day ...
    So here is my QUOTE
    TOSHIBA 8 : average length 20 minutes 8 GBP
    PC WORLD 4 @ 1.50 min 15 GBP
    GAS / FUEL : 15 GBP
    Loss of Earnings : 90 GBP @ 5 DAYS 410 GBP
    Damages " DO YOU GET MY POINT YET ? "
    As I mentioned I'm a reserved man ,but getting shafted by TOSHIBA from all angles does has Limits
    Now what I would like to see arriving on my front door is a new brand spanking Laptop with " WE ARE SORRY " note attached .
    but for some reason I don't get that impression ?????
    I'm hoping we can remedy this issue in a sensible fashion ,
    If we can't , I do have a great idea of posting a YOUTUBE video of me destroying your product with several sharp objects , counter productive maybe ,but when it hits a million hits I'm sure I will get another company to give me a laptop out the kindness of there heart ................
    Now for forum posters I apologize for raining on your day , to TOSHIBA please try to understand why I'm a little bit upset .
    Have a nice day
    PEACE .
    PM ME .......................................

  • Can i upload photos directly to ATV via USB port

    Can I upload photos directly onto ATV via the USB port on the back of the ATV. In other words is it possible to bypass the computer and iTunes? I've been trying but can't figure it out.

    The short answer is no. All ATV content has to come from either an iTunes library or directly from the iTunes store on the ATV. The USB port on the ATV is essentially useless to the end user. About the only thing it's good for is to connect a USB fan if your equipment cabinet is too hot.

  • USB port failure on Satellite P300-172

    I purchased this laptop in August 2008, I have had no problem with it until last week when the USB port that I plug the mouse in to stopped working.
    I changed to the next one, this also wasnt working, but one on the other side worked ok. Used the laptop all that evening, next day it would not boot up, just got a set up screen ,exited that and it switched itself off, switched on again, power lights all came on, but just a blank screen. I noticed that the area round the defective USB s got really hot in a couple of minutes.
    I feel the USB failure has caused some major fault, motherboard perhaps.
    I paid a lot of money for this laptop and I expected it to last longer than 13 months. I tried phoning Toshiba but I cant get through, it keeps saying press this button for the dept you want but whatever button you press it comes back to the original message.
    Asked a computer engineer if he had any idea what could be the problem with the laptop and he thinks that too much power is going in to it.
    Has anyone got any idea what could be the cause of that, I am housebound and rely on the internet.

    Its pity to hear that your notebook started to malfunction but a hardware malfunction can always happen. Generally you should contact the ASP (authorized service partner) in your country for a help.
    I dont know where you are from but I found this ASP database on the Toshiba European page:
    http://eu.computers.toshiba-europe.com -> Support & Download -> Find an Authorized Service Provider
    Regarding your issue;
    In most case the higher internal temperature could be the reason for such shut downs.
    The notebook supports some sensors which would power off the notebook to prevent the hardware from damage the temperature can increase because the cooling modules are clogged due to the dust and debris furthermore a usage of non-Toshiba graphic card driver can lead to graphic card issues So its always advisable to use the Toshiba graphic drivers.
    Anyway it looks like your notebook needs an help from a expert so get in contact with ASP in your country and ask for details.

Maybe you are looking for

  • How do you use disk utility to burn a bootable .iso dvd?

    Anybody have a clue on how you use disk utility to burn a .iso bootable dvd disk? I'm trying to install windows 7 rc into virtual box in OS X 10.5.7 and cannot figure out how to do this. I've already installed the windows 7 beta in virtual box and wa

  • Problems With Video Transfer To

    It wont let me transfer .wmv files. IT says that the playback isnt supported by the player. And then i try to convert and it still doesnt work. Im running vista and have all the codecs installed. Any ideas?

  • How can I cancel a pre-order?

    I'd like to order a pre-order album before it is charged. How can I do that?

  • Challan reconciliation after 180 days.

    Hi all, I have been using subcontracting process as an alternative for returnable gate pass. Where in we are sending material by 541, doing chalan against that document & then taking material back by 542 & reconcile chalan against document of 542. Bu

  • Windows Boot Camp partition not showing up on Startup Disk in Snow Leopard

    Dear Fellow Mac Heads, I have Windows 7 RTM installed as Boot Camp in one partition and Snow Leopard 10.6.1 installed in another. In Windows, the Boot Camp icon shows everything (i.e. Network, Windows 7, and Mac OSX Snow Leopard) so I can switch back