Hotfix (4.1.3559) installation on the second portal node fails

Hi,
I'm installing FIM hotfix (4.1.3559). It installed without issues on sync server and first node of the portal/service. On second node it is failing. Here is place from the log (most probably failing somewhere here):
StartServices: Service: Forefront Identity Manager Service
MSI (s) (70:D4) [16:57:19:635]: Executing op: ActionStart(Name=PatchRemoveFIMPortal,,)
Action 16:57:19: PatchRemoveFIMPortal.
MSI (s) (70:D4) [16:57:19:635]: Executing op: CustomActionSchedule(Action=PatchRemoveFIMPortal,ActionType=1025,Source=BinaryData,Target=CAQuietExec,CustomActionData="C:\Program Files\Microsoft Forefront Identity Manager\2010\Portal\Microsoft.IdentityManagement.SolutionPackUtility.exe"
action=uninstall mode=ServiceAndPortal log=event SHAREPOINTTIMEOUT=180 SolutionPack=MicrosoftIdentityManagement.wsp deleteweb=no continueonerror=no UILevel=5)
MSI (s) (70:2C) [16:57:19:790]: Invoking remote custom action. DLL: C:\Windows\Installer\MSICD1E.tmp, Entrypoint: CAQuietExec
CAQuietExec: Microsoft.IdentityManagement.SolutionPackUtility.exe will deploy and/or retract the FIM solution packs. This operation may take long time in a SharePoint farm environment.
CAQuietExec: Executing all administrative timer jobs in preparation for FIM solution pack retraction.
CAQuietExec: An exception occurred while deploying/retracting FIM Portal solution packs. Exception : Exception has been thrown by the target of an invocation.
CAQuietExec: Error 0xfffffff9: Command line returned an error.
CAQuietExec: Error 0xfffffff9: CAQuietExec Failed
CustomAction PatchRemoveFIMPortal returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
09/27/2014 16:57:28.791 [7024]: Assembly Install: Failing with hr=80070005 at RemoveDirectoryAndChildren, line 398
09/27/2014 16:57:28.791 [7024]: Detailed info about C:\Windows\assembly\tmp\S9M6DS80\Microsoft.ResourceManagement.dll
09/27/2014 16:57:28.791 [7024]: File attributes: 00000080
09/27/2014 16:57:28.948 [7024]: Restart Manager Info: 1 entries
09/27/2014 16:57:28.948 [7024]:   App[0]: (7024) Windows Installer (msiserver), type = 3
09/27/2014 16:57:28.948 [7024]: Security info:
09/27/2014 16:57:28.948 [7024]:   Owner: S-1-5-18
09/27/2014 16:57:28.948 [7024]:   Group: S-1-5-18
09/27/2014 16:57:28.948 [7024]:   DACL information: 4 entries:
09/27/2014 16:57:28.948 [7024]:   ACE[0]: Type = 0x00, Flags = 010, Mask = 001f01ff, SID = S-1-5-18
09/27/2014 16:57:28.948 [7024]:   ACE[1]: Type = 0x00, Flags = 010, Mask = 001f01ff, SID = S-1-5-32-544
09/27/2014 16:57:28.948 [7024]:   ACE[2]: Type = 0x00, Flags = 010, Mask = 001200a9, SID = S-1-5-32-545
09/27/2014 16:57:28.948 [7024]:   ACE[3]: Type = 0x00, Flags = 010, Mask = 001200a9, SID = S-1-15-2-1
09/27/2014 16:57:28.963 [7024]: Assembly Install: Failing with hr=80070005 at RemoveDirectoryAndChildren, line 398
09/27/2014 16:57:28.963 [7024]: Detailed info about C:\Windows\assembly\tmp\WGGUV4IP\Microsoft.IdentityManagement.Logging.dll
09/27/2014 16:57:28.963 [7024]: File attributes: 00000080
09/27/2014 16:57:29.088 [7024]: Restart Manager Info: 1 entries
09/27/2014 16:57:29.088 [7024]:   App[0]: (7024) Windows Installer (msiserver), type = 3
09/27/2014 16:57:29.088 [7024]: Security info:
09/27/2014 16:57:29.088 [7024]:   Owner: S-1-5-18
09/27/2014 16:57:29.088 [7024]:   Group: S-1-5-18
09/27/2014 16:57:29.088 [7024]:   DACL information: 4 entries:
09/27/2014 16:57:29.088 [7024]:   ACE[0]: Type = 0x00, Flags = 010, Mask = 001f01ff, SID = S-1-5-18
09/27/2014 16:57:29.088 [7024]:   ACE[1]: Type = 0x00, Flags = 010, Mask = 001f01ff, SID = S-1-5-32-544
09/27/2014 16:57:29.104 [7024]:   ACE[2]: Type = 0x00, Flags = 010, Mask = 001200a9, SID = S-1-5-32-545
09/27/2014 16:57:29.104 [7024]:   ACE[3]: Type = 0x00, Flags = 010, Mask = 001200a9, SID = S-1-15-2-1
09/27/2014 16:57:29.104 [7024]: Assembly Install: Failing with hr=80070005 at RemoveDirectoryAndChildren, line 398
09/27/2014 16:57:29.104 [7024]: Detailed info about C:\Windows\assembly\tmp\NJBBJ7LC\Microsoft.IdentityManagement.CredentialManagement.Portal.Gates.dll
09/27/2014 16:57:29.104 [7024]: File attributes: 00000080
09/27/2014 16:57:29.244 [7024]: Restart Manager Info: 1 entries
09/27/2014 16:57:29.244 [7024]:   App[0]: (7024) Windows Installer (msiserver), type = 3
09/27/2014 16:57:29.244 [7024]: Security info:
09/27/2014 16:57:29.244 [7024]:   Owner: S-1-5-18
09/27/2014 16:57:29.244 [7024]:   Group: S-1-5-18
09/27/2014 16:57:29.244 [7024]:   DACL information: 4 entries:
09/27/2014 16:57:29.244 [7024]:   ACE[0]: Type = 0x00, Flags = 010, Mask = 001f01ff, SID = S-1-5-18
09/27/2014 16:57:29.244 [7024]:   ACE[1]: Type = 0x00, Flags = 010, Mask = 001f01ff, SID = S-1-5-32-544
09/27/2014 16:57:29.244 [7024]:   ACE[2]: Type = 0x00, Flags = 010, Mask = 001200a9, SID = S-1-5-32-545
09/27/2014 16:57:29.244 [7024]:   ACE[3]: Type = 0x00, Flags = 010, Mask = 001200a9, SID = S-1-15-2-1
09/27/2014 16:57:29.275 [7024]: Assembly Install: Failing with hr=80070005 at RemoveDirectoryAndChildren, line 398
Any suggestions/hints? I belive it is something with SharePoint (SP Foundation 2013 is used/ no farms).
By the way - in the similar setup in test environment it went OK. Right now it is failing on the production
Borys Majewski, Identity Management Solutions Architect (Blog: IDArchitect.NET)

Same situation with update 4.1.3599 (newer one)
Finally issue has been solved - it was some well know SharePoint problem. Clearing some sharepoint cach helped (http://officepoint.blogspot.com/2008/06/update-conflict-has-occurred-and-you.html)
Borys Majewski, Identity Management Solutions Architect (Blog: IDArchitect.NET)

Similar Messages

I cannot register a secret phrase. I type it in the first box, type one letter in the second and it fails tellling me they don't match. I never hit enter or tab

I am trying to add firefox sync. Part of the registration is to create a secret phrase. I don't know what is wrong with it. It is not at all evident. I have tried a secret phrase with caps, without caps, with spaces, without spaces. As soon as I try to confirm it and type one character it blows up.

Disable Yahoo Messenger (with the arrow on the right of your account name) in Yahoo mail.

Burning a book in iTunes the second disc always fails?

I keep trying to burn a book from iTunes onto CD's but this time after the first disc, my external drive keeps rejecting the discs. I know there was an update awhile ago that addressed external burners from being ignored by the system but I udated the software.

Are you getting any error messages? What do they say? Have you contacted the external drive manufacturer? Read its user manual?

Port of the TNS Listener for the second SAP system

Hello!
I had problems during the installation of the second SAP system with second Oracle DB on the same host (OP is SOLARIS).
The error occurs was faced with TNS Listener.
(> error: TNS Listener is started)
Which settings are applied for the TNS Listener per default in SAPINST?
(e.g. on the same port)
Which settings should I apply in SAPINST for TNS Listener, e.g. configure an another port?
Thank you very much!
regards
Thom

Hello!
Thank you very much!
Even that is the question.
1) If I have selected "ok" during the installation and no further values selected, will SAPINST check whether the Port 1527 is allocated by the first SAP System and create the second Port 1528?
2) Do I have one TNS Listener with two file entries or two TNS Listener?
Thank you very much!
regards
Thom

Install Second Portal Istance on the same PC.

Hello people,
I've to install the second portal (Rel. 1) istance on the same machine. Have someone tried to do this?
Thanks

shouldnt be a problem,
under your existing Installation $ORACLE_HOME/install/portlist.ini take the file, modify the port pool so that it doesnt clash, then use the ports list during installing the second server

How to get the following-sibling nodes until a specific node

XSL people,
I need to get all the following-sibling nodes for every <h> node until the next <h> node.
Example:
<body>
<h>Header1</h>
<a>Line 11</a>
<b>Line 12</b>
<c>Line 13</c>
<a>Line 14</a>
<h>Header2</h>
<a>Line 21</a>
<c>Line 22</c>
<a>Line 23</a>
<b>Line 24</b>
</body>
So I need to get this strings:
from the first <h> node: Line 11Line 12Line 13Line 14
from the second <h> node: Line 21Line 22Line 23
When using following-sibling
<xsl:value-of select="following-sibling::a"/>
<xsl:value-of select="following-sibling::b"/>
<xsl:value-of select="following-sibling::c"/>
I am not getting the second <a> node (of course!), so for the first <h> node I am only getting
Line 11Line 12Line 13
and not
Line 11Line 12Line 13Line 14
and I don't know how to get it.
Thank you.
Anatoliy Smirnov

Thanks Sudipto for trying to help. I did try that, and as I mentioned in the previous posting, it doesn't work for the tree nodes (multiple RowSetIterator). the following is my code, where the treeVO is the vo instance for the firstLevel tree nodes and it has view link to its children. I am not sure how to sort all children for each level. Even for the first level where I did the explicit sorting in memory, it still not sorting at all.
treeVO.setSortBy("code");
treeVO.setQueryMode(ViewObject.QUERY_MODE_SCAN_ENTITY_ROWS|ViewObject..QUERY_MODE_SCAN_DATABASE_TABLES);
treeVO.executeQuery();

How to load second level nodes dynamically in jTree?

Hi,
I'm new to jTree & I want to load jTree with two levels of Hierarchy dynamically.
First level nodes I loaded from the database directly.
And regarding the second level nodes, I want them to be loaded only when I expand the first level nodes(on tree expansion), instead of loading it before-hand itself.
I tried this in TreeExpansion event, but still my tree was not refreshed.
Is there anyother way to do this .....?
Thanks.
G.

Hi sangar;
use method valueChanged() in ListSelectionEvent interface to notify tree selection change.

How to use the second display for installation OS in my vertical lines iMac

My 17" iMac display is full of vertical lines, it is unuseable. Does anyone know how to use the second display for Mac OS X or disable the first display for installation Mac OS x ?

Go to: *System Preferences > Displays* and select the Arrangement tab, then relocate your Menu bar by dragging it to the other display.
Unfortunately there is no Hardware or Software switch to turn off the iMac's Internal Display.

Trying to install a new copy of Leopard without the second installation cd.

I'm trying to do a fresh install from the first installation disk I got with my Mac. However, when I get past the first installation disk, it tells me it needs disk 2. I don't have a second disk, but after a call to Apple Support I was assured that I didn't need one, as it only contains extra features. The person on the other end suggested that I try reinstalling the OS again from the beginning. So I started up the computer from the installation disk again, only to be prompted by a message saying I would need my disk 2 for the installation. There is an option to customize my installation before that. By customization it means whether to not install additional languages, fonts, and printer drivers. However, even if I unchecked everything possible, it still prompts me for a second disk. I'm kinda of confused about what to do at this point.
Message was edited by: twinkiemunki

Earlier versions of the system disks supplied with new Mac's need the second DVD to complete the installation. Yours must be this type. From about 10.5.6 onwards the installers changed. You then installed the first DVD, completed setup, then run the applications install DVD. As far as I'm aware based upon what you have reported, you will need the second DVD. Your options are to locate it, or use a retail installer and iLife DVD for a full installation.

I have purchased OS X mountain Lion and want to redownload but the apple store asking to repurchase and its not coming in my purchases but i still have the receipt from apple. Do i need to buy it again for the second installation. Kindly help

I have purchased the OS X mountain lion and want to re install after resetting my system but app store not showing it in my purchases. Do i need to re buy it and pay for it again for the second installation. ?

Welcome to the Apple Support Communities
Open App Store > Featured > Account > Show hidden purchases and unhide Mountain Lion. You can install Mountain Lion on all your computers for free

Installation of the Proof of Purchase from the ACPI table failed. Error code:0xC004F059

I just updated Window 8.0 to 8.1 for the second time as the first Time there was an UEFI issue... the 8.1 installs and update seemed smooth... I shut down, and I leave for work. I come home fire up my PC it seems slow!! it boots...
I notice some live tiles are active I prefer mine off so I shut off a couple Live tiles. so then I decide to open the Mail tile and it locks up... and then one of my browsers freezes up!!! I could not open task manager at all to end the
proses, so I decided to restart and then an app was not allowing windows to restart!!! so windows ended the task on its own could not make out what program or app it was!!! and the machine booted up slower again. I went into the event viewer
and what do I find in there is this stuff and now looking at it this all started after the windows 8.1 update... I get it we all want the latest and greatest OS but as my mom said good things come to those whom wait don't rush into anything!!!
and I think Microsoft you are rushing to push stuff out onto the Market... so now I have to sit here and wonder why my PC now takes 2 + minutes to load!!! (BS) and on win 8.0 it took 60 seconds... fix this please I will watch and see if
this happens again if it keeps up I will have to once again revert back to 8.0 and at that point I will want some $$$ compensation for my loss... why should I have to go through hoops for something with the word Mircrosoft attached to it...
I wonder how many others have had this same issue and don't even know its happening....
1.
Installation of the Proof of Purchase from the ACPI table failed. Error code:0xC004F059
2.
taskhostex (2888) WebCacheLocal: The shadow header page of file C:\Users\Dale\AppData\Local\Microsoft\Windows\WebCache\V01.chk was damaged.The primary header page (4096 bytes) was used instead.
3.
The driver \Driver\WudfRd failed to load for the device SWD\WPDBUSENUM\{362b48de-4382-11e3-be6e-3085a9a945d8}#0000000000007E00.
4.
Driver detected an internal error in its data structures for
5.
The program wwahost.exe version 6.3.9600.16431 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
Process ID: e14
Start Time: 01cf3eb70280ca6e
Termination Time: 4294967295
Application Path: C:\WINDOWS\syswow64\wwahost.exe
Report Id: f7b4be2f-aaaa-11e3-8250-3085a9a945d8
Faulting package full name: Microsoft.SkypeApp_2.0.0.5011_x86__kzf8qxf38zg5c
Faulting package-relative application ID: App
6.
The program wwahost.exe version 6.3.9600.16431 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
Process ID: 15bc
Start Time: 01cf3eb66f89a193
Termination Time: 15
Application Path: C:\WINDOWS\system32\wwahost.exe
Report Id: 0fd54265-aaaa-11e3-8250-3085a9a945d8
Faulting package full name: microsoft.windowscommunicationsapps_17.4.9600.16384_x64__8wekyb3d8bbwe
Faulting package-relative application ID: Microsoft.WindowsLive.Mail

I have the something similar happening as reported in event viewer in the warning section:
System
- Provider
   [ Name] Microsoft-Windows-Security-SPP
   [ Guid] {E23B33B0-C8C9-472C-A5F9-F2BDFEA0F156}
   [ EventSourceName] Software Protection Platform Service
- EventID 1058
   [ Qualifiers] 32768
   Version 0
   Level 3
   Task 0
   Opcode 0
   Keywords 0x80000000000000
- TimeCreated
   [ SystemTime] 2014-08-13T04:35:49.000000000Z
   EventRecordID 80761
   Correlation
- Execution
   [ ProcessID] 0
   [ ThreadID] 0
   Channel Application
   Computer Monzworks
   Security
- EventData
   0xC004F059
installation of the proof of purchase from the acpi table failed 0xc004f059
My System Properties page says "Windows is activated" and a product Id is displayed. I am on a window 8.1 core OS after applying the update successfulling from Window 8. My computer is an AsusTek Computer Inc. ,
Asus Desktop PC CM1745 Series - 64-bit Operating System x64-based processor.
I had trouble with AODDriver4.2.0 causing errors because the system could not find the path, It turned out to be uncleared program remnants in the registry were looking for an old version of the driver, in the wrong place , instead of the current one.
Oh, and I tried sfc/scannow and DISM /Online /Cleanup-Image /RestoreHealth from elevated cmd prompt and elevated powershell ise everthing was reported with no errors and with powershell, the report said windows store corruption was repaired.
Before this I had used apps.diagcab and it said my IE 11's temporary internet files folder was in the wrong place that it was going to put it back. Well, it messed up my IE 11 so the folder location was in the same place but it was not listed in the
location:                 . <----- Just like this. Plus the amount of disk space available was 8mb-which messed up any sort of operations for example putting in a new search
engine could not be completed. I had to use a system restore.   I currently have no errors showing up but warnings yes. thankfully most are minor.This is the other event viewer report which could be related:
- System
- Provider
   [ Name] Microsoft-Windows-Security-Auditing
   [ Guid] {54849625-5478-4994-A5BA-3E3B0328C30D}
   EventID 5061
   Version 0
   Level 0
   Task 12290
   Opcode 0
   Keywords 0x8010000000000000
- TimeCreated
   [ SystemTime] 2014-08-13T03:48:26.671362500Z
   EventRecordID 290021
   Correlation
- Execution
   [ ProcessID] 676
   [ ThreadID] 728
   Channel Security
   Computer Monzworks
   Security
- EventData
SubjectUserSid S-1-5-21-4255092528-2166032690-2543152005-1002
SubjectUserName Monz Prez
SubjectDomainName MONZWORKS
SubjectLogonId 0x239d9
ProviderName Microsoft Software Key Storage Provider
AlgorithmName UNKNOWN
KeyName CD1CC265-0DA0-4230-8419-CB6F808FE688
KeyType %%2500
Operation %%2480
ReturnCode 0x80090016
I am tired so talk among yourselves.
Sincerely Tired

How can I log into two differant accounts at the same time in two windows without the second window affecting the first.

I'm trying to log into two facebook accounts at the same time in differant windows. When ever I log into the second account in the second window it changes the login in the first window. When I hit home or any other link the first window account has been logged out and logged into the second window account. I tried installing a second copy of firefox in a differant folder that the first but it seems to use all the files of the first installation. If I can get 2 toatally seperated instalations that don't rely on the same history, cookies, cache, etc I belive that will solve my problem. Please help.
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; OfficeLiveConnector.1.4; OfficeLivePatch.1.3)

Nah, that won't work. Facebook has a feature that gets your IP Address, so as soon as you sign into one on the same computer, it changes the other login for safety purposes (say, someone was on a public library PC. They forgot to log out. Someone else logs in, and it automatically logs them out). You'll need 2 computers to do that.

Re: How to use the second hard drive in Satellite A300?

I have been given a second hand Satellite A300 that was being thrown out due to a faulty DVD.
I fixed the DVD and have a perfect working system.
On opening the case I discovered it has 2 x 250GB hard drives. I checked CMOS and the 2 drives show. Yet, Vista only shows the one drive.
Excuse my ignorance but how do I access the second drive?

I have Satellite A300 with two hard drives and each HDD has other operating system. Both HDDs are recognized properly.
I dont know what is wrong there but both HDDs should be recognized automatically.
Try to set BIOS to default settings and check it again.
Try to start bootable Microsoft installation disc and check if both HDDs are shown in setup.
I just hope there is no some hardware problem.

Using the second hard drive in my G5

I bought my Mac about 14 months ago with twin 250GB hard drives fitted. I wanted to use the second hard drive to store my CD collection through itunes.
I have tried to install itunes on the second hard drive but the software installer says it has to go on the startup volume. I have also tried copying my itunes folder and pasting it to the second hard drive as a backup but it won't allow this either. It says that the drive cannot be modified.
How do I use the second hard drive as intended? I upgraded to Tiger so do I need to install that on the second hard drive?
Thank you.

Hi Mike;
I have a 250 GB and a 160 GB hard drive in my Quad. A long time ago when I had much smaller drives, I did move Users to another disk because I was running out of space on my system drive. One of the problems I ran into with this was when my second drive with Users on it didn't start quickly enough for OS X. OS X created a new Users for me with nothing in it. It was a royal pain getting my system pointed back to the Users on the second drive.
What I do now is leave Users where OS X installs. I now move just my project files, music, photos and web pages. I find that this is largest part of Users. It is also the part of Users that I am the most concerned about. With all of my project files on another drive, the system is able to access data from both drives very quickly. It also makes backup simpler.
Allan

ISSUE Sharepoint 2013 databases for reporting services on the second server SQL 2012

Hello,
I have server A: Operating system windows 2012 standard, SQL server 2012 standard
instance: Sharepoint contains data for sharepint
instance: Reporting should be contain databases for reporting
Server B:
Windows server 2012 standard contains installation Sharepoint 2013
Sharepoint works (without reporting services), it is OK - databases are located on server A:
My issue is:
When I have installed reporting services on server B, I have already installed SQL server 2012 on server B, it works.
I am able to create report in report builder adn place it in to sharepoint.
But I would like to use only one full SQL machine on server A:
When I reconfigure repoting settings on server A in central administration - manage service aplications,
On the SQL server A in instance reporting , there is automatically created databases. It is no problem.
But the first difference is, when I want to manage service aplication for reporting in
Provision Subscriptions and Alerts, there is information
SQL Server Agent state cannot be determined
When I want to create report in report builder, I have issue:
server A-7380mw016\reporting it means server A with full SQL server:
The Test of connection was successful
Then I have clicked test connection
I have recieved this screen with fail: Logon faild for user NT Authority\anonymous logon
My account belongs to SQL admin on server A (A-7380mw016\reporting) I do not know it is not possible to create report, when it is possible to test connection in the first step and in the second step, there is problem...
Please, can somebody help me?

Hi,
Since you are getting an Anonymous Logon error, it appears there may be a problem passing your credentials to the SQL Server Agent Service. This would indicate a Kerberos issue. See this thread for details:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/46b7c773-6a77-435d-b471-cb9a6ec41c43/has-anyone-else-upgraded-reporting-services-to-denali-2012
Microsoft Virtual Academy: Breakthrough Insights using SQL Server 2012 : Analysis Services and Credible, Consistent data (Module 2) - Configuring and Securing Complex BI Applications in a SharePoint 2010 Environment with Microsoft SQL Server 2012
http://technet.microsoft.com/en-us/video/Video/hh858469
Tips from the video:
We are connecting to Reporting services using Kerberos when using Reporting Services in SharePoint integrated mode
For the account using reporting services, we just need a dummy SPN. We go to Attribute editor tab in AD for RS account. And then we will be enabled with Delegation tab.
In Delegation tab. I we are using claims to windows token, we need to use "Trust this user for delegation to specified services only"
There you have 2 options: "Use Kerberos only": It means I only want to delegate in the situation where the service that is doing the delegation actually has the Kerberos ticket to start with
"Use any authentication protocol" When we need protocol transition (like from NTLM to claims for intra farm communication)
We need to delegate this to SQL server.
Please check out these articles as well:
How to configure SQL Reporting Services in SharePoint Server for Kerberos authentication
http://support.microsoft.com/kb/2723587
Configure Kerberos authentication (Office SharePoint Server)
http://blogs.technet.com/b/mbiswas/archive/2009/07/10/configure-kerberos-authentication-office-sharepoint-server.aspx
Thanks.
Tracy Cai
TechNet Community Support

Hotfix (4.1.3559) installation on the second portal node fails

Similar Messages

Maybe you are looking for