Hotfix KB2830546 for BizTalk Server 2013?

This is a question for MS:
I am a bit puzzled by the fact that a BizTalk Server hotfix is all of a sudden rolled out automatically through Windows Update?
Also this hotfix is marked "Important", but reading the description (The verical scroll bar on the target schema....) hardly seems critical to a production environment.
When examining the hotfix:
http://support.microsoft.com/kb/2830546
it seems that there are two additional fixes inside it:
Note This update also resolves the issues that are described in the following Microsoft Knowledge Base (KB) articles:•
2832136
FIX: User cannot perform certain database-related operations in BizTalk Server 2013
2832137
FIX: BAM tools cannot be configured in a multi-node BizTalk Server 2013 environment
Now these seems more critical! Is that the reason that it is pushed automatically? And why are two important updates "hidden" inside a "non-important vertical scroll bar" hotfix?
Can we expect other hotfixes for BizTalk to be pushed automatically in the future? (After all they used to require manual installation from CU's etc., which I found best practice since we then have the ability to install them in a test environment first)?
Morten la Cour

You can decide if you want to have automatic updates for BizTalk or not. BizTalk Server 2013 will release all updates through windows update (optionally you can download these manually). Why it only showed that one element is probably a bug, I'll inform
MS about this topic. But yes, MS have started pushing BizTalk updates through windows update in BizTalk 2013.
Best regards,
Tord

Similar Messages

Looking for microsoft press book on C# programming for Biztalk server 2013 and also one for WWF 4.5

Is there any microsoft pressbook available for Biztalk server 2013?
Also is there one for WWF 4.5.
Please send me the URL where I can view the book contwnta nad buy.
Rajesh S Harwani

The dynamic ports use a pipeline including a custom pipeline component which I can confirm is available in the correct directory
C:\Program Files (x86)\Microsoft BizTalk Server 2013\Pipeline Components
I’m a bit stuck at what to try now, I have option where I could recreate the dynamic ports from scratch in the orchestrations and redeploy to dev in the hope it’s something
that VS2012 didn’t handle too gracefully when converting the project.
Two things.
1. That's what I would do first, recreate (really just change and reset the properties) the Orchestration Ports in Visual Studio.
2. Probably not related but, Custom Pipeline Components should not be placed in the Pipeline Components folder. All Custom Pipeline Components should be in the GAC only. The Pipeline Components folder
is a compatibility vestige from BizTalk Server 2004.

Domain users creation for BizTalk server 2013 installation

Hi all,
I am setting up biztalk 2013 environment clustered BizTalk server and single sql server. I would like to know the list of domain users and domain groups to be created and which groups these users to be a member of. I am also installing and would be using
Sharepoint to develop BizTalk interfaces.
Thanks
Please Help
Vikram

Hi Vikram ,
You need to create below Windows group on your AD before you start your BizTalk Configuration .
1)SSO Administrators:Administrator of the Enterprise Single Sign-On (SSO) service.
2)SSO Affiliate Administrators :Administrators of certain SSO affiliate applications.Can create/delete SSO affiliate applications, administer user mappings, and set credentials for affiliate application users.
3)BizTalk Server Administrators:Has the least privileges necessary to perform administrative tasks Can deploy solutions, manage applications, and resolve message processing issues.
To perform administrative tasks for adapters, receive and send handlers, and receive locations, the BizTalk Server Administrators must be added to the Single Sign-On Affiliate Administrators.
4)BizTalk Server Operators:Has a low privilege role with access only to monitoring and troubleshooting actions
5) BizTalk Application Users:The default name of the first In-Process BizTalk Host Group created by Configuration Manager.Use one BizTalk Host Group for each In-Process host in your environment.Includes accounts with access to In-Process
BizTalk Hosts (hosts processes in BizTalk Server, BTSNTSvc.exe).
6)BizTalk Isolated Host Users :The default name of the first Isolated BizTalk Host Group created by Configuration Manager. Isolated BizTalk hosts not running on BizTalk Server, such as HTTP and SOAP.Use one BizTalk Isolated Host Group for
each Isolated Host in your environment.
7)BAM Portal Users :Has access to BAM Portal Web site.
8)BizTalk SharePoint Adapter Enabled Hosts :Has access to Windows SharePoint Services Adapter Web Service
9)BizTalk B2B Operators Group : A new BizTalk role that reduces the onus on the Administrators to perform all Party management operation. This role allows windows users associated with the role to perform all party management operations.
Now coming to domain User , you can have single -multiple setting were you can run SSO ,InProcess and Isolated on different domain user . You can also run all the configuration settings on single user as well .
Thanks
Abhishek

BAM Portal configuration error in BizTalk Server 2013 R2

I have tried 2 attempts to build out a BizTalk Server 2013 R2, I have followed the MSDN Install instructions, and I keep on getting an error when configuring BAM Portal. I have the logfile available, I need to know what the experts need to see in order to
give me an answer. Understand that we have been using BizTalk Server 2013 for the last two years, and a new developer wants the R2 version and BAM Portal configured. As an administrator I have fought this to no end, and now I have enough evidence to go back
to our project manager and explain why you do not install every feature on a server. Prove me wrong EXPERTS!

" I need to know what the experts need to see in order to give me an answer."
Experts needs:
1) Little background of the issue you are facing.
2) The log file generated.
3) The configuration of your server.
"now I have enough evidence to go back to our project manager and explain why you do not install every
feature on a server."
Disagree, It is indeed possible to install all the components and feature on a server. Somewhere someone would have installed BizTalk 2013 R2 and all its components in exactly same server configuration successfully in which you are trying to achieve, the
only difference could be a missing Package, Patch, Cumulative Update, Service or any configuration miss at your end.
Pls read more about BizTalk 2013R2 installation on Installation Overview for BizTalk Server 2013 and 2013 R2.
Review the Hardware
and Software Requirements for BizTalk Server 2013 and 2013 R2.
Understand the Considerations
Before Installing BizTalk Server 2013 and 2013 R2.
Prepare Your Computer for Installation.
Specifically for BAM Portal. Microsoft has documented Prerequisites, Permissions and Considerations.
Planning for the BAM Portal
I would advice you to refer this post by Sandro . BAM Portal configuration error
Rachit

How to apply hotfix 3000847 to Windows Server 2012 & BizTalk Server 2013 R2

Hi
I have a environment get the same issue as:
http://support.microsoft.com/en-us/kb/3000847. But this hotfix can't be used in my environment.
The environment information:
We are using Windows Server 2012 Standard, BizTalk Server 2013 R2 Enterprise Edition. And the Version of Microsoft Enterprise Single Sign-On is 9.0.2096. It's the same as the article.
Here is the article content:
Prerequisites
To apply this hotfix, you must have Enterprise Single Sign-On V5 (9.0.2096) installed.
Best regards,
Glen Qu (Fareast\v-zuqu)

Have you tried installing it? Are you getting any error?
Ideally you should not face any issue while installing this hotfix.
Pre-requisites-
1) User account should be member BizTalk Server Administrators Group and have SydAdmin privileges on SQL Server
2) Stop all the host instances
3) Stop SQL Agent
4) Stop App Pools if any webservices is posting messages in BizTalk
Please refer the below article Information about BizTalk hotfixes and Cumulative Update support(Uninstall and rollback if required).
http://support.microsoft.com/kb/2003907
Thanks,
Prashant
Please mark this post accordingly if it answers your query or is helpful.

Problem with BizTalk server 2013 SFTP adapter on Cloud VM

All,
We have deployed Microsoft Biztalk Server 2013 Enterprise edition on a cloud VM. We are facing an issue with SFTP adapter to receive. Following are the details;
On this VM, we are facing an issue with BizTalk server 2013 SFTP adapter. The SFTP location can receive and send message through SFTP clients and .Net code. But using BizTalk server 2013 SFTP adapter we are only able to send the file on SFTP location but
could not receive the files from same location.
We are getting just one line error in system event log that is :
Event#7011. A timeout (30000 milliseconds) was reached while waiting for a transaction response from the BTSSvc$BizTalkServerApplication service.
Regards,
Shoaib Danish

Hi
BizTalk Server 2013 is available on Windows Azure. BizTalk Server 2013 can be installed locally on your hardware
and in Windows Azure as a virtual machine. Please follow the procedures to check it on your side.
Configuring BizTalk Server 2013 on a Windows Azure VM
Create a BizTalk Virtual Machine in Windows Azure
Create the BizTalk Group Prerequisites
Configure the BizTalk Group
Best regards
Angie
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

BizTalk Server 2013 SFTP Adapter with private key - Did not poll any files

Hello,
We have a requirement to connect SFTP secure site with the private key and polling files. Initially I have
tested BizTalk Server 2013 SFTP Adapter receiver Port using Bitvise SSH SFTP Server tool and it was working perfectly in our local network environment( with public private key authentication).
However when we connected to Client SFTP server with private key authentication, It successfully connected to SFTP Server but
did not poll any files from SFTP Site. I added only one file to SFTP Server ( 145 kb file) for testing purpose.
However BizTalk Server 2013 SFTP Send Adapter is working well with the same configuration.
I could not find any errors in Event viewer also. I can download\upload file using WinSCP tool .
So I downloaded nSoftware SFTP Adapter trial version and deployed on server. nSoftware SFTP adapter is also working find
without any issues for Client SFTP Site.
This is the configuration on SFTP Receive Adapter
This is how SFTP Server download folder permission configured. I have got this details using WinSCP tool.
<o:p></o:p>
Appreciate your help on this.<o:p></o:p>
Thanks<o:p></o:p>
PrabathD<o:p></o:p>

BizTalk Adapter for SFTP is where the polling logic is implemented. It is not part of the SFTP Client logic. any SFTP Client is for User Interaction and you do what you want/when you want.
The BizTalk Receive however is for purposes of automation and the adapter polls the receive location using the credentials every polling interval to check for the files matching the filter. When it find a file, it will read and publish to message box or
submit to pipeline for processing. Your setting the polling interval to 0 (ZERO) might actually be disabling the polling.
Set your poll interval to a non-zero value and check the behavior.
Regards.

BizTalk Server 2013 and deployment MSI with dynamic send ports

Hello community, wonder if any help out there for this odd problem.
Deployment of application msi fails into BizTalk 2013 prod environment, fails when deploying the project dll that contains all the orchestrations,
and reports a failure to apply early bindings. The only early bindings in this project are dynamic send ports. I cannot recreate the problem in in my QAS environment where deployments of the same msi works fine.
I can build an msi without any bindings at all except for the dynamically created ones, and this also display the same behaviour on import.
I have test deployed a 2nd unrelated app that also uses dynamic send ports, and this displays the problem.
Adding the assembly directly to BizTalk console displays the same behaviour.
Deployment of msi apps without dynamic send ports are ok.
The dynamic ports use a pipeline including a custom pipeline component which I can confirm is available in the correct directory
C:\Program Files (x86)\Microsoft BizTalk Server 2013\Pipeline Components
No specific further detail is available in the error except.
Import Wizard[09/05/2014 08:20:47]: Error in Importing Application
Import Wizard[09/05/2014 08:20:47]: Change requests failed for some resources.
BizTalkAssemblyResourceManager failed to complete end type change request.
Unable to deploy early bindings.
Failed to update binding information.
Error in the application.
Other information that may be relevant:
The main difference between QAS and PROD is that PROD is a two node cluster. Import behaviour is the same if attempted on either node. Assemblies are installed in both nodes currently.
The dynamic ports are set on handlers that are non-clustered hosts (all are for adapter type SMTP).
I have ensured that all the adapter handlers are identically setup in both environments.
The project files were migrated to BizTalk 2013 from BizTalk 2010, imported and then converted using VS 2012.
The msi has installed the assemblies as per usual and they do exist in the .net 4 gac
There is a reference to a shared resource in a different application, this application is installed and imported ok.
I’m a bit stuck at what to try now, I have option where I could recreate the dynamic ports from scratch in the orchestrations and redeploy to dev in the hope it’s something that VS2012 didn’t handle too gracefully
when converting the project. I could move the functionality into a helper class and forget about using dynamic sends, rather not go down that route. I'm still suspecting this is small difference in setup
of the group between QAS and PROD but I can't see anything jumping out.
Any comments are most welcome.

The dynamic ports use a pipeline including a custom pipeline component which I can confirm is available in the correct directory
C:\Program Files (x86)\Microsoft BizTalk Server 2013\Pipeline Components
I’m a bit stuck at what to try now, I have option where I could recreate the dynamic ports from scratch in the orchestrations and redeploy to dev in the hope it’s something
that VS2012 didn’t handle too gracefully when converting the project.
Two things.
1. That's what I would do first, recreate (really just change and reset the properties) the Orchestration Ports in Visual Studio.
2. Probably not related but, Custom Pipeline Components should not be placed in the Pipeline Components folder. All Custom Pipeline Components should be in the GAC only. The Pipeline Components folder
is a compatibility vestige from BizTalk Server 2004.

Installing BAM with Biztalk Server 2013 and SQL server 2012

Hello All,
I have to work on BAM with BizTalk Server 2013 and SQL server 2012 , is BAM already comes with BizTalk server installation ?
Will I needs to explicitly install that ? from where I can get the installer for BAM ?
What else I will needs to work on BAM ?
Note : I want to handle Exceptions in BAM ....how to do that ?
Thanks,
Nitin.
Thanks and Regards, Nilesh Thakur.

Hi,
BAM is available with BizTalk, all you need is to select it and install .
Refer the
Installation Guide available on MSDN or follow the blog: http://sandroaspbiztalkblog.wordpress.com/2013/05/05/biztalk-2013-installation-and-configuration-important-considerations-before-set-up-the-server-part-1/
Maheshkumar S Tiwari|User
Page|Blog|BizTalk
Server : Scheduling Orchestration using Trigger Message

BizTalk Server 2013 R2 EDI EDIFACT custom Target Namespace is not being used

I have a client that has a partner that doesn't use the "out of the box" BizTalk EDIFACT 97A DELFOR schema. I'm using BizTalk Server 2013 R2. I need to use a custom target namespace. I have created a custom schema for EFACT_D97A_DELFOR with
a different namespace http://schemas.microsoft.com/BizTalk/EDI/EDIFACT/2006_<partnername>.
In the Parties agreement/Transaction Set Settings/Local Host Settings, I have the following in a separate row under the "Default", UNH2.1=DELFOR, UNH2.2=D, UNH2.3=97A and TargetNamespace=http://schemas.microsoft.com/BizTalk/EDI/EDIFACT/2006_<partnername>
It wants to use the out of the box schema from the error below but I need it to use the custom schema. If I change the input file with a UH2.5 value along with changing the root node to match it EFACT_D97A_DELFOR_<UNH2.5), it works but the partner
will not be sending this, so it's not an option.
Error details: An output message of the component "Unknown " in receive pipeline "Microsoft.BizTalk.Edi.DefaultPipelines.EdiReceive, Microsoft.BizTalk.Edi.EdiPipelines, Version=3.0.1.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"
is suspended due to the following error:
Error encountered during parsing. The Edifact transaction set with id '' contained in interchange (without group) with id '000010080', with sender id '<senderid>', receiver id '<receiverid>' is being suspended with following
errors:
Error: 1 (Miscellaneous error)
70: Finding the document specification by message type "http://schemas.microsoft.com/BizTalk/EDI/EDIFACT/2006#EFACT_D97A_DELFOR" failed. Verify the schema deployed properly.
Error: 2 (Miscellaneous error)
71: Transaction Set or Group Control Number Mismatch
Error: 3 (Miscellaneous error)
29: Invalid count specified at interchange, group or message level
Any thoughts for this issue?
Thanks,
Sean

All,
Because the trading partner is not sending the UNH2.5, UNG2.1 and UNG2.2 values in the incoming message, the EDIFACT custom targetnamespace schema will not be used. I created a decode custom pipeline component where I inject the UNH2.5 element,changed
the rootnode to the trading partner specific schema to EFACT_D97A_DELFOR_XYZ (where "XYZ" is the value in the UNH2.5) and in the Party agreement->TransactionSetSettings->LocalHostSettings default row specifying the UNH2.1, UNH2.2
and UNH2.5, it will then use the custom schema(http://schemas.microsoft.com/BizTalk/EDI/EDIFACT/2006#EFACT_D97A_DELFOR_XYZ. I could've injected the UNG segment
and used a custom target namespace and not changed the rootnode of the custom schema but didn't want to add all that extra segment information.
The example below assumes that the UNH segment only has values "up to" UNH2.4 only and appends the UNH2.5. Uses the UNA segement to dynamically set the componentDataElementSeparator.
//UNA segment e.g. UNA:+.? '
//this example above has ' as the segmentTerminator, : as the componentDataElementSeparator, + as the dataElementSeparator
string unaSegment = messageBody.Substring(0, messageBody.ToUpper().IndexOf("UNA") + 9);
string componentDataElementSeparator = unaSegment.Substring(3, 1);
string dataElementSeparator = unaSegment.Substring(4, 1);
string segmentTerminator = unaSegment.Substring(8, 1);
string UNH_Segment = messageBody.Substring(messageBody.ToUpper().IndexOf("UNH"));
UNH_Segment = UNH_Segment.Substring(0, UNH_Segment.IndexOf(segmentTerminator));
//inject UNH2_5 in the existing UNH_Segment
messageBody = messageBody.Replace(UNH_Segment,
UNH_Segment + componentDataElementSeparator + UNH2_5);
Thanks All for all your help!!
Sean Boman

Installation Biztalk Server 2013 and SQL on different machines

I want to know if I can install a Biztalk server 2013 and SQL on different machines?

BizTalk Server 2103 and SQL Server (SQL Server
2012 or SQL Server 2008 R2 SP1) can be installed and configured on different machines.
For more instruction about this installation, refer to following MSDN installation guide for BizTalk :
Installation Guides Related to BizTalk Server 2013 and 2013 R2
from the above list download -
"Installing BizTalk Server 2013 and BAM in a Multi-Computer Environment.docx" document for your requirement.
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

BAM Activity and view issue on BizTalk server 2013 R2 machine.

Hello all,
I am trying to make BAM portal work since couple of days but no luck yet...
I ma using BizTalk server 2013 R2.
I am trying to deploy the activity and view from my Development server to Test server ( it's working fine on Developemnt).
I have gone through one post and found this and followed steps here is the output for that :
First confirm that you can see the name of the activity in the list of deployed activity by executing this command:
bm.exe get-activities
--> I can see the activity name in there so I belive that activity is got created.
While creating the BAM activity you must have created/deployed a view get the name of the view by using this command:
bm.exe get-views -Activity:<activity name>
--> I can see the view name in there so I belive that view is exist.
You need to provide permission to the account you are using to access the BAM portal on this view by using this command.
bm.exe add-account -AccountName:”<AccountName>” -View:<viewname>
--> while executing this command is got error as :
Using 'BAMPrimaryImport' BAM Primary Import database on server 'TESTSERVER'...
ERROR: Security management of the BAM view failed.
The SQL role for the specified view is missing.
Note : My BAMAlert service is running and running using
GROUP\~biztalkservice account I am logged on Test Server using "NitinUser" account with administrator rights.
What does this mean - if this mean that I needs to give rights to my user (NitinUser) on SQL Database please tell me how to do that ? with command....
Thanks and Regards, Nitin.

Hi Nitin,
Can you try the solution as suggested by Thiago Almeida.
http://connectedthoughts.wordpress.com/2008/06/16/bam-deployment-gotchas/
His solution for this problem is to remove the view and re-add it, which worked for him. Obviously I didn't encounter this error, so have to suggest the solution from community.
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.
Hello Ashwin,
As per that post the author was having issue that view was not created ...
also have noticed one thing that by executing following command in sql management studio.
use
BamPrimaryImport
SELECT
SUSER_SNAME(owner_sid),nameFROMsys.DATABASES
on my development box it's showing my user GROUP\nitinUser and Name = CustomBizTalkDB
but when I execute this on TEST server, entry for GROUP\nitinUser is not in database
Thanks and Regards, Nitin.

Migrating Parties from Covast 2006 to BizTalk Server 2013

Guys,
I have around 300 EDI Covast parties setup in Biztalk Server 2006 and now we are upgrading these applications to BizTalk Server 2013. Is there anyway to get these parties migrated to BTS 2013 and create parties/agreements programatically.
Any help will be greatly appreciated.
Thanks,
Sam

You may have to upgrade to BizTalk 2006 R2 and then use the Party Migration Tool [refer
http://msdn.microsoft.com/en-us/library/hh183963.aspx] to migrate your parties.
You can also refer
http://technet.microsoft.com/library/bb259970(v=bts.80).aspx for 2013 specific Trading Partner Management Activities.
Regards.

Migrating From BizTalk 2009 To Biztalk server 2013

Hi All,
My current solution is on BizTalk 2009 and my client is thinking of migrating to BizTalk 2013 . Please suggest me is it a good idea to migrate to BizTalk 2013.
Please provide me a difference between 2009 to 2013
Difference between 2009 to 2013 and main features.
Thanks and Regards
Dhanavel S

Hi Dhanavel,
Why don’t you think about migrating to BizTalk 2013 R2 which is available now. Anyway
First and foremost thing, BizTalk Server 2009’s mainstream support from Microsoft has ended on 08-July-2014. After mainstream support, customer will get extended support until
09-July-2019. So you're are in extended support phase now. Find out the following blogpost where you will know more about what you can get and what you’re going to miss from Microsoft support for BizTalk Server 2009. And also about what you have to do next.
Why you have to migrate to the latest version.
BizTalk Server 2009 mainstream support ends.What to do next?
Apart from losing the benefits of mainstream support against the extended support and apart from getting the benefits of latest offering/features of the newer version of the
product, BizTalk server 2009 is closely dependent on its underlying platforms like Windows Server 2008 (or Window server 2003/Windows XP-SP3/Windows Visa SP1), SQL Server 2008 (or SQL Server 2005 SP2) and Visual Studio 2008. So its high time to migrate.
BizTalk Server 2009 mainstream support ends. What to do next?
Some of the benefits of migrating from BizTalk 2009 to BizTalk 2013.
Platform upgrades:
BizTalk 2013 uses following, so when you upgrade from BizTalk 2009 to 2013, you will get the benefits by upgrading your platforms.
Windows Server 2012 (BizTalk 2009 uses Windows Server 2009)
Visual Studio 2012(BizTalk 2009 uses Visual Studio2008)
.NET Framework 4.5 (BizTalk 2009 uses .NET 3.5)
SQL Server 2012(BizTalk 2009 uses SQL 2008)
Virtualization support for Hyper-V (this feature is available from BizTalk 2010 onwards)
Some of the other benefits include
Better support to could
Azure Service Bus. And support for
BizTalk Server running on Azure IaaS
BizTalk Server 2013 Support for RESTful Services
More support towards WCF-based adpaters.
Secure FTP with new FTPS Adapter and an improved FTP Adapter
Out-of-box support to SFTP Adapter
Enhancements to the IBM Hosts Systems adapters
Update to BizTalk mapper
Updated Trading Partner Management (TPM) Capabilities.
Updates to industry schemas like HIPPA, HL7, SWIFT and SWIFTNet
Seamless ability to leverage BizTalk capabilities from SharePoint 2010 Business Connectivity Service to Line-of-Business systems
BizTalk Server setting dashboard for setting to
configuring the key performance, throttling, and tracking settings of your entire BizTalk group while offering fine grained control all the way down to the Host
Instance level.
ESB toolkit part of BizTalk installation.
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

Reading PDF contents in BizTalk server 2013

Can BizTalk Server 2013 read PDF file contents? Or any third party tool can be plugged in BizTalk to achieve this.
Any help would be highly appreciated.

BizTalk as an “engine” can only read XML nothing else.
If you want to do some processing in BizTalk based on the PDF content, then PDF needs to be converted into XML. As of now there no out-of-box support to handle PDF file contents. By using a custom component (custom pipeline component) you got to covert the
PDF into XML file and produced XML files can be processed in BizTalk as usual. To get started for PDF pipeline component, read this codeplex pipeline component which in turn uses
itextsharp libarary.
http://pdf2xmlbiztalk.codeplex.com/
Or you can create your own custom decode pipeline component which converts the PDF to XML. Most of the custom component use 3<sup>rd</sup> part library
(there are many available).
Or when mean - “Can BizTalk
Server 2013 read PDF file contents” to route the PDF just using the pass-thru shall pass the BizTalk PDF as steam of byte through message box. You can also use
Orchestration to route the PDF message by following the suggestion mentioned here.,.
Processing PDFs (or anything else!) in BizTalk Orchestrations
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

Hotfix KB2830546 for BizTalk Server 2013?

Similar Messages

Maybe you are looking for