Hotfix Package 2 for Microsoft Application Virtualization 5.0 Service SP2

This article describes a hotfix package that contains the latest hotfixes for Microsoft Application Virtualization 5.0 Service Pack 2 (SP2). This hotfix package fixes the following issues.
Issue 1
Certain App-V 5.0 Service Pack 1 (SP1) packages do not work with the App-V 5.0 Service Pack 2 (SP2) clients.
This is an issue in App-V 5.0 SP2 that may appear to prevent some applications from starting. This includes packages that were sequenced on earlier versions of App-V 5.0. A valid App-V 5.0 package starts correctly and displays a GUI under App-V 5.0 SP1. Under
App-V 5.0 SP2, the same package does not display a GUI, or it appears not to start.
Issue 2
A sharing violation occurs during profile synchronization when you use App-V 5.0.
When an App-V user on a Remote Desktop Services (RDS) server logs on after a period of inactivity, a sharing violation may occur when the profile is synchronized to the local cache. Therefore, some required files are not copied over, or they are renamed. In
this situation, the profile becomes corrupted.
Issue 3
App-V client handlers leak in Remote Desktop Services (RDS).
When an RDS user logs off, App-V does not release some handles that it held specifically for this session, and therefore the resource cannot be reused. In this situation, the Session ID monotonically increases without reusing IDs from previously finished sessions.
Issue 4
A virtualized Excel Visual Basic for Applications (VBA) application fails if the path for the application contains Chinese or Japanese characters.
Issue 5
Certain applications don't start after Hotfix Package 1 for APP-V 5.0 Service Pack 2 is applied.
Selected registry key values were removed after the deployment of Hotfix 1 for APP-V 5.0 Service Pack 2. This prevents some applications from starting. By reverting Hotfix Package 1 for APP-V 5.0 SP2, you restore these registry values to their default state.
However, any existing customizations will be lost and will have to be redone.
Note This issue only affects deployments that were upgraded from APP-V 5.0 Service Pack 1 to APP-V 5.0 Service Pack 2 before Hotfix Package 1 was applied. Remote Desktop Services (RDS) deployments are not affected by this issue.
For all the details and a download link, please see the KB article below:
KB2934349 -

Hello,
Use /norestart to suppress reboots
Nicke Källén | The Knack| Twitter:
@Znackattack

Similar Messages

Service Pack 2 for Microsoft Application Virtualization 5.0

App-v 5.0 Sp2 has been issued for over a month and the update is not yet listed in the Software updates list or search. Service Pack 3 for App-v 4.6 and Service Pack 1 for App-v 5.0 are showing in the list. Our environment is SCCM 2012 R2 upgraded from
SP1.

Hi,
Please refer to the following articles:
Release Notes for App-V 5.0 SP2
http://technet.microsoft.com/en-US/library/dn508411.aspx
Hotfix Package 2 for Microsoft Application Virtualization 5.0 Service SP2
http://support.microsoft.com/kb/2934349
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Does APP-V 5 SP2 applications still require Microsoft Application Virtualization SFT in order to scan for vulnerabilties/software inventory

Does APP-V 5 SP2 applications still require Microsoft Application Virtualization SFT in order to scan for vulnerabilties/software inventory

Hello,
Have you tried this hotfix?
http://blogs.technet.com/b/appv/archive/2014/03/03/hotfix-package-2-for-microsoft-application-virtualization-5-0-service-sp2-is-now-available.aspx
Nicke Källén | The Knack| Twitter:
@Znackattack

Error when uninstalling App-V RDS client: Product: Microsoft Application Virtualization (App-V) Client for Remote Desktop Services 5.0 Service Pack 2 x64 -- Error 1324. The folder path 'C:' contains an invalid character

Issue: experienced when attempting to uninstall the App-V 5.0 SP2 RDS client.
Event Log: Product: Microsoft Application Virtualization (App-V) Client for Remote Desktop Services 5.0 Service Pack 2 x64 -- Error 1324. The folder
path 'C:' contains an invalid character
Symptoms (when in this current state):
Unable to uninstall the SP2 client
You can upgrade the client (via hotfix) and uninstall the hotfix, but you will not be able to remove the SP2 client
AppvVfs filter driver will not create an instance, therefore applications will not be able to read into existing streamed VFS content, or trigger sparse files to stream content. (you can still stream the content via other means, like the UI or powershell)
Because of the AppvVfs filter driver not instantiating, applications that depend on licences that exist in VFS will not be able to be read causing certain applications to react as if the license does not exist or is an incorrect format

Resolution:
Check for the existence of a hidden folder named %appdata% in the C:\Program Files\Microsoft Application Virtualization\Client folder. (You will need to un-check the folder options box in windows explorer for "Hide
protected operating system files" to see it)
If the hidden %appdata% folder exists, delete it.
Proceed to uninstall the App-V client
After a clean uninstall and removal of remnants of the client, reinstall the client again and apply the latest hotfix available (Hotfix 2 for SP2 at a minimum).

Unable to install hotfix package 2 for AppV 5 SP1 (KB2897087)

Good afternoon,
We've downloaded hotfix package 2 for AppV 5 SP1 (KB2897087) but when going to install we receive the message "The Application Virtualization update setup did not finish because the target version of App-V Server is not installed".
What we have installed on server is the following:
- Microsoft App-v Server 5.0.285.0
- Microsoft App-V Server 5.0.1104.0 Service Pack 1
So we have SP1 installed. Has anyone else had this issue? Is there another patch / update that needs to be applied first?
Thanks

Hi,
I get the following under an appv_server_patch log file:
[10F0:07DC][2014-01-29T15:31:24]: Burn v3.6.2803.0, Windows v6.1 (Build 7601: Service Pack 1), path: -KB2897087.exe, cmdline: '-burn.unelevated BurnPipe.{3AF7A429-681C-4D96-BF99-F51728DBA9B1} {209380CC-EA1F-441C-8515-041C255D6504} 3928'
[10F0:07DC][2014-01-29T15:31:24]: Initializing string variable 'IsBundlePatchOnly' to value '1'
[10F0:07DC][2014-01-29T15:31:24]: Initializing string variable 'TargetBaselineVersion' to value '5.0.1104.0'
[10F0:07DC][2014-01-29T15:31:24]: Setting string variable 'WixBundleLog' to value 'C:\Users\~1\AppData\Local\Temp\appv_server_patch_20140129153124.log'
[10F0:07DC][2014-01-29T15:31:24]: Setting string variable 'WixBundleOriginalSource' to value 'KB2897087.exe'
[10F0:07DC][2014-01-29T15:31:24]: Setting string variable 'WixBundleName' to value 'Hotfix for Microsoft App-V Server 5.0.1218.0 Service Pack 1 (KB2897087)'
[10F0:07DC][2014-01-29T15:31:24]: Loading managed bootstrapper application.
[10F0:07DC][2014-01-29T15:31:25]: Creating BA thread to run asynchronously.
[10F0:09C4][2014-01-29T15:31:25]: Setting numeric variable 'UNSUPPORTEDLOCALE' to value 1
[10F0:09C4][2014-01-29T15:31:25]: AppvUX: Found an unsupported locale (2057) for this version of the App-V Bundle installer. Defaulting to the English locale.
[10F0:09C4][2014-01-29T15:31:25]: AppvUX: Passed all blocking checks.
[10F0:07DC][2014-01-29T15:31:25]: Detect 13 packages
[10F0:07DC][2014-01-29T15:31:25]: Detected related bundle: {997a2732-f077-4e9b-adac-a2e7e59787ba}, type: Upgrade, scope: PerMachine, version: 5.0.285.0, operation: MajorUpgrade
[10F0:07DC][2014-01-29T15:31:25]: AppvUX: A previous version of this product is installed; requesting update.
[10F0:07DC][2014-01-29T15:31:25]: Detected package: CoreX64Patch, state: Absent, cached: None
[10F0:07DC][2014-01-29T15:31:25]: Detected package: CoreX64Patch target: {F3C7A461-93F2-4A64-B94A-4FC296775522}, state: Absent
[10F0:07DC][2014-01-29T15:31:25]: Detected package: AllLangpackX64, state: Absent, cached: None
[10F0:07DC][2014-01-29T15:31:25]: Detected package: AllLangpackX64 target: {9807F918-9115-4C9C-A30C-C63252083281}, state: Absent
[10F0:07DC][2014-01-29T15:31:25]: Detected package: EnUsLangpackX64Patch, state: Absent, cached: None
[10F0:07DC][2014-01-29T15:31:25]: Detected package: EnUsLangpackX64Patch target: {E6FC6D7E-5D76-4053-89BC-373A21998F05}, state: Absent
[10F0:07DC][2014-01-29T15:31:25]: Detected package: DeDeLangpackX64Patch, state: Absent, cached: None
[10F0:07DC][2014-01-29T15:31:25]: Detected package: JaJpLangpackX64Patch, state: Absent, cached: None
[10F0:07DC][2014-01-29T15:31:25]: Detected package: ZhCnLangpackX64Patch, state: Absent, cached: None
[10F0:07DC][2014-01-29T15:31:25]: Detected package: ZhTwLangpackX64Patch, state: Absent, cached: None
[10F0:07DC][2014-01-29T15:31:25]: Detected package: EsEsLangpackX64Patch, state: Absent, cached: None
[10F0:07DC][2014-01-29T15:31:25]: Detected package: FrFrLangpackX64Patch, state: Absent, cached: None
[10F0:07DC][2014-01-29T15:31:25]: Detected package: ItItLangpackX64Patch, state: Absent, cached: None
[10F0:07DC][2014-01-29T15:31:25]: Detected package: KoKrLangpackX64Patch, state: Absent, cached: None
[10F0:07DC][2014-01-29T15:31:25]: Detected package: PtBrLangpackX64Patch, state: Absent, cached: None
[10F0:07DC][2014-01-29T15:31:25]: Detected package: RuRuLangpackX64Patch, state: Absent, cached: None
[10F0:07DC][2014-01-29T15:31:25]: AppvUX: Detect phase complete; starting plan phase.
[10F0:07DC][2014-01-29T15:31:25]: AppvUX: The target product for this update bundle was not found.
[10F0:09C4][2014-01-29T15:31:26]: AppvUX: Exit status : BaselineNotDetected
[10F0:07DC][2014-01-29T15:31:26]: Detect complete, result: 0x0
[10F0:07DC][2014-01-29T15:31:26]: Shutting down, exit code: 0xb
[10F0:07DC][2014-01-29T15:31:26]: Variable: IsBundlePatchOnly = 1
[10F0:07DC][2014-01-29T15:31:26]: Variable: TargetBaselineVersion = 5.0.1104.0
[10F0:07DC][2014-01-29T15:31:26]: Variable: UNSUPPORTEDLOCALE = 1
[10F0:07DC][2014-01-29T15:31:26]: Variable: WixBundleAction = 4
[10F0:07DC][2014-01-29T15:31:26]: Variable: WixBundleElevated = 1
[10F0:07DC][2014-01-29T15:31:26]: Variable: WixBundleLog = C:\Users\~1\AppData\Local\Temp\appv_server_patch_20140129153124.log
[10F0:07DC][2014-01-29T15:31:26]: Variable: WixBundleName = Hotfix for Microsoft App-V Server 5.0.1218.0 Service Pack 1 (KB2897087)
[10F0:07DC][2014-01-29T15:31:26]: Variable: WixBundleOriginalSource = KB2897087.exe
[10F0:07DC][2014-01-29T15:31:26]: Variable: WixBundleProviderKey = {bee44f0f-05be-48e4-81dd-d34a83600b95}
[10F0:07DC][2014-01-29T15:31:26]: Variable: WixBundleTag =
[10F0:07DC][2014-01-29T15:31:26]: Exit code: 0xb, restarting: No
I can see it says BaselineNotDetected but also says the TargetBaselineVersion = 5.0.1104.0 which is what we already have installed?

Microsoft Application Virtualization 5 - Reporting

We have Configured Microsoft Application Virtualization 5 on Non-persistent Desktops using Xendesktop 7.5 MCS
The Users are able to launch a Virtual Desktop and the appv client connects to publishing server and synchronizies the applications permission to user.
User is able to launch applications and after the usage they logoff there virtual desktops
When the User logs off the changes on the non-persistent desktop are lost and with it we are lossing the appv-reporting information.
Following is set as a Group Policy "Computer Configuration\Administrative Templates\System\Reporting\Report Server"
Reporting URL : Our reporting server url
Reporting time : 16
Delay reporting for the random minutes : 15
Repeat reporting for every (days) :1
Data Cache Limit : 20
Data Block Size : 65536
So any user who happens to be online at 4PM there appv reporting data is uploaded to the database other wise its lost.
Ideally we would like to upload the appv report data durring the user logoff.
There is a Powershell command Send-AppvClientReport it does push the data to database but requires Administrative Previleges.
Is there way we can permission the send-AppvClientReport to be able to run from user context so we can run as a group policy when the user loggs off ?
Or is ther any other way we can save the reporting data and upload to reporting database ?

Hi Raj,
It appears that Microsoft themselves are using scheduled task to update the reports if you used the group policy. You can see it if you run scheduled tasks as administrator and navigate to Microsoft\AppV\Reporting. The task executes powershell.exe with the
following command:
-NonInteractive -WindowStyle Hidden -ExecutionPolicy RemoteSigned -Command "&{import-module 'C:\Program Files\Microsoft Application Virtualization\Client\AppvClient\AppvClient.psd1'; Send-AppvClientReport -NetworkCostAware -DeleteOnSuccess}"
What I did is I used group policy preferences to create similar task to run at my own schedule with additional trigger of winlogon event id 7002 (logoff). I had to use XML to create the task. Here is an example:
<TaskV2 clsid="{D8896631-B747-47a7-84A6-C155337F3BC8}" name="send-appvclientreport" image="2" userContext="0" removePolicy="0" changed="2014-10-08 14:13:02" uid="{A0DE6673-2FBE-4E03-A753-92DD1A9D2F6A}"><Properties action="U" name="send-appvclientreport" runAs="S-1-5-18" logonType="Password"><Task version="1.2"><RegistrationInfo><Author>SOMEUSERACCOUNT</Author><Description></Description></RegistrationInfo><Principals><Principal id="Author"><UserId>S-1-5-18</UserId><LogonType>Password</LogonType><RunLevel>LeastPrivilege</RunLevel></Principal></Principals><Settings><IdleSettings><Duration>PT5M</Duration><WaitTimeout>PT1H</WaitTimeout><StopOnIdleEnd>false</StopOnIdleEnd><RestartOnIdle>false</RestartOnIdle></IdleSettings><MultipleInstancesPolicy>IgnoreNew</MultipleInstancesPolicy><DisallowStartIfOnBatteries>false</DisallowStartIfOnBatteries><StopIfGoingOnBatteries>false</StopIfGoingOnBatteries><AllowHardTerminate>true</AllowHardTerminate><StartWhenAvailable>true</StartWhenAvailable><AllowStartOnDemand>false</AllowStartOnDemand><Enabled>true</Enabled><Hidden>false</Hidden><ExecutionTimeLimit>PT1H</ExecutionTimeLimit><Priority>7</Priority></Settings><Triggers><CalendarTrigger><StartBoundary>2014-10-08T14:06:28Z</StartBoundary><Enabled>true</Enabled><ScheduleByDay><DaysInterval>1</DaysInterval></ScheduleByDay><ExecutionTimeLimit>PT30M</ExecutionTimeLimit><Repetition><Interval>PT1H</Interval><StopAtDurationEnd>false</StopAtDurationEnd></Repetition></CalendarTrigger>
<EventTrigger><Enabled>true</Enabled><Subscription><QueryList><Query Id="0" Path="System"><Select Path="System">*[System[Provider[@Name='Winlogon'] and EventID=7002]]</Select></Query></QueryList></Subscription></EventTrigger>
</Triggers><Actions><Exec><Command>powershell.exe</Command><Arguments>-NonInteractive -WindowStyle Hidden -ExecutionPolicy RemoteSigned -Command "&{import-module 'C:\Program Files\Microsoft Application Virtualization\Client\AppvClient\AppvClient.psd1'; Send-AppvClientReport -NetworkCostAware -DeleteOnSuccess}"</Arguments></Exec>
</Actions></Task></Properties></TaskV2>
If you cannot copy/paste the xml, you can create a new scheduled task. You probably will not be able to select system as the user to execute and perhaps will not see winlogon for the triger. Pick any other values. Once the task is created, copy it from group
policy and paste in notepad. Edit there the account to S-1-5-18 and the Subscription tag to winlogon.
Hope this helps

Whitelist and documents delivered via Microsoft Application Virtualization (appv)

I’ve tried to get my Adobe Reader X to open documents delivered via Microsoft Application Virtualization - when protected mode enabled.
Using the whitelist concept in Adobe Reader X, I’ve successfully created some policies
EVENTS_ALLOW_ANY = *
MUTANT_ALLOW_ANY = *
This is resulting in the following entries in the log file when I try to open a document which is delivered via Microsoft Application Virtualization:
[09:03/15:15:21] Adobe Reader Protected Mode Logging Initiated
[09:03/15:15:21] Found custom policy file: C:\Programmer\Adobe\Reader 10.0\Reader\ProtectedModeWhitelistConfig.txt
[09:03/15:15:21] Adding custom policy: EVENTS_ALLOW_ANY = *
[09:03/15:15:21] Adding custom policy: MUTANT_ALLOW_ANY = \BaseNamedObjects\sg00000000e2e6e550_*
[09:03/15:15:22] NtCreateMutant: STATUS_ACCESS_DENIED
[09:03/15:15:22] real_path: \BaseNamedObjects\MSCTF.Shared.MUTEX.MEM
[09:03/15:15:22] Overvej at redigere politik med denne politikregel: MUTANT_ALLOW_ANY
As I see it, the problem seemes that instead of adding
MUTANT_ALLOW_ANY = *
it adds
[09:03/15:15:21] Adding custom policy: MUTANT_ALLOW_ANY = \BaseNamedObjects\sg00000000e2e6e550_*
So when trying to initiate
\BaseNamedObjects\MSCTF.Shared.MUTEX.MEM
it will of course fail.
Is there any way that I can add
\BaseNamedObjects\MSCTF.Shared.MUTEX.MEM
without having
\BaseNamedObjects\sg00000000e2e6e550
put in front of it?

I’ve tried to get my Adobe Reader X to open documents delivered via Microsoft Application Virtualization - when protected mode enabled.
Using the whitelist concept in Adobe Reader X, I’ve successfully created some policies
EVENTS_ALLOW_ANY = *
MUTANT_ALLOW_ANY = *
This is resulting in the following entries in the log file when I try to open a document which is delivered via Microsoft Application Virtualization:
[09:03/15:15:21] Adobe Reader Protected Mode Logging Initiated
[09:03/15:15:21] Found custom policy file: C:\Programmer\Adobe\Reader 10.0\Reader\ProtectedModeWhitelistConfig.txt
[09:03/15:15:21] Adding custom policy: EVENTS_ALLOW_ANY = *
[09:03/15:15:21] Adding custom policy: MUTANT_ALLOW_ANY = \BaseNamedObjects\sg00000000e2e6e550_*
[09:03/15:15:22] NtCreateMutant: STATUS_ACCESS_DENIED
[09:03/15:15:22] real_path: \BaseNamedObjects\MSCTF.Shared.MUTEX.MEM
[09:03/15:15:22] Overvej at redigere politik med denne politikregel: MUTANT_ALLOW_ANY
As I see it, the problem seemes that instead of adding
MUTANT_ALLOW_ANY = *
it adds
[09:03/15:15:21] Adding custom policy: MUTANT_ALLOW_ANY = \BaseNamedObjects\sg00000000e2e6e550_*
So when trying to initiate
\BaseNamedObjects\MSCTF.Shared.MUTEX.MEM
it will of course fail.
Is there any way that I can add
\BaseNamedObjects\MSCTF.Shared.MUTEX.MEM
without having
\BaseNamedObjects\sg00000000e2e6e550
put in front of it?

Blank pages for all applications in Manager Self Service (MSS) role

Hi Experts,
We are newly implementing ESS/MSS and deployed ESS/MSS business packages with following BP's
BP ERP05 COMMON PARTS 1.51 SP5
BPERPESSWDA 1.50 SP5
BP ERP05 MSS 1.51 SP5
after deploying above BP's all ESS applications working fine, but in MSS role all applications(Team,Budget, Projects and Planning) giving me blank page.
for example..MSS>TeamEmployee Information--> when I click on "General Information,compensation Information links etc.." it is displaying in separate window with blank page. it is not displaying any error, just displaying blank page.
We are using Net Weaver7.3, EHP5 and ECC6. Can any one help out of this?
Thanks in advance,
Janardhan

There are two parts of the Web Dynpro based business package
1. Portal content (iView Page, Role etc) (Starts with BPxxx.sca)
2. Web Dynpro content(MSSxxx.sca)
My guess is you have just deployed the Business package content and not the Web Dynpro content.
Refer to this and deploy the corresponding files
http://wiki.sdn.sap.com/wiki/display/ERPHCM/HOWTOGETRIDOFSPSTACKMISMATCHISSUES
Thanks
Prashant

Workaround for Print Job disappear for Microsoft Office applications (Word, Excel, Power Point...)

Hi All,
If you come across the printing is not working, or cancelling automatically or disappear from spooler, for Microsoft applications, then here is the workaround.
Create a new user account and login to to the computer, and you should be able to print any documents.
Here is the step to create new user.
1. Control Panel-> Click on User accounts
2. In User accounts, click add user to create new user.
3. Use that account to login and do printing.
Again it is temporary work around, until we get permanent fix for this issue.
Thanks
Happy Printing.
Click on the "Thumbs up"button on the left to say "Thanks"
Please mark the post that solves your problem as "Accepted Solution"
(Although I am employed by HP, I am speaking for myself and not for HP)

The kernel failure panic kind of message points to some other activity;
as such, it may be there could be a conflict in some applications; as a
logical failure is indicated by the first part of the message content.
Whether or not any common kernel panic resolution ideas could work
in regard to the trigger of this action, is another matter & unresolved.
Reading and understanding the resulting logs is part of this resolution;
the following link has information on these kinds of issues in general.
Technical Note TN2063: Understanding and Debugging Kernel Panics
http://developer.apple.com/mac/library/technotes/tn2002/tn2063.html
Resolving Kernel Panics:
http://www.thexlab.com/faqs/kernelpanics.html
If there were more, perhaps from another error log in the system, to
point to other contributing factors in the cause of this action & report,
some course of correction could be indicated; should that involve a
reinstall of certain programs (and their update files, as Office has) or
perhaps removing other seldom used applications if they were proven
to be part of conflict in the system, with Office triggering its appearance.
Some troubleshooting of this issue may point to some course of action
and if the problem is only software-based, then it may involve testing
or moving, or reinstalling some applications. There is a chance, too,
that something else may be acting up at a low-level of the system. If
that were the case, sometimes a re-install of the system on a wiped
and zeroed drive would be a path to consider to test or resolve this.
But only after other things have been tried. If you have a full backup
of the computer's contents on a bootable external drive, that would be
a means of testing the computer itself.
Good luck & happy computing!

Windows 8.1 Install blocked by Application Virtualization Desktop Client

When I try to install Windows 8.1 from the store I get an error message that I need to uninstall the Microsoft Application Virtualization Desktop Client. But when I check control panel to uninstall the application it does not exist in the list.
When I choose to have the installation uninstall it doesn't work.
Bottom line I am stuck where the install is asking me to uninstall another application which I don't believe I have installed.

The Application Virtualization client will be related to Microsoft Office Home and Student 2010. Here's how to update that version of Office: http://office.microsoft.com/en-au/excel-help/update-repair-or-uninstall-office-click-to-run-products-HA010382089.aspx
Ensure any available updates are applied (I'd also check Windows Update) and reboot before trying the Upgrade Assistant again.
This
page suggests that this version of Office 2010 should be compatible with Windows 8, so hopefully ensuring you've installed all available updates should fix the issue.
Please remember to click "Mark as Answer" or "Vote as Helpful" on the post that answers your question (or click "Unmark as Answer" if a marked post does not actually
answer your question). This can be beneficial to other community members reading the thread.
This forum post is my own opinion and does not necessarily reflect the opinion or view of my employer, Microsoft, its employees, or other MVPs.
Twitter:
@stealthpuppy | Blog:
stealthpuppy.com |
The Definitive Guide to Delivering Microsoft Office with App-V

CEN (/rz20) MappingErrors for /Applications/KM Collaboration/SCF/Service Co

Hello All,
at the CEN (CentralMonitoring System) i see in the
/rz20
SAP J2EE Monitor Templates - CCMS Selfmonitoring - MoniInfra_HOSTNAME - CCMS Connector - Mapping errors an issue
"Invalid configuration group for node /Applications/KM Collaboration/SCF/Service Connectors".
Does anybody know what error this is?
Thanks for help!
Martina

Check under system administration->monitoring->Knowledge M
whether you see all green symbols for the 4 categories of KMC components. They should all be green; if not then please open a OSS message. The problem you've posted most likely is caused by a missing connection to a CCMS which is an optional component for the java stack; the sp14 stack should work regardless of this problem.

Application Error on some application since app-v 5 sp2 (event id 1000)

Hello Everybody
Since we installed SP2 of App-V 5 we get Application Errors (event id 1000) ond some of our virtualised applications:
faulty module:
C:\Program Files\Microsoft Application Virtualization\Client\Subsystems\AppVEntSubsystems32.dll
Does anybody know this? It's only on the client with SP2.
Thanks in advance.
KR,
lurus

Hi Mickey,
I am getting the same error with SAPGUI 720 and Business Explorer 720, which rely on Visual C++ runtimes. The sequences run fine on AppV 5 SP1. I am getting the following detailed error for SAP GUI:
Problem Event Name:                        APPCRASH
Application Name:
saplogon.exe
Application Version:
7200.2.6.1062
Application Timestamp:                     4da7f027
Fault Module Name:
AppVEntSubsystems32.dll
Fault Module Version:                        5.0.3361.0
Fault Module Timestamp:                  5278121f
Exception Code:
c0000005
Exception Offset:
000013b0
OS Version:
6.1.7601.2.1.0.256.4
Locale ID:
2057
Additional Information 1:                  4c0d
Additional Information 2:                  4c0d4d78887f76d971d5d00f1f20a433
Additional Information 3:                  4c0d
Additional Information 4:                  4c0d4d78887f76d971d5d00f1f20a433
I sequenced it again in AppV 5 SP2 and am getting the same problem. This is a critical app for us, and yet we want to upgrade to SP2 so that we can provision apps which have a right click context menu...
Regards
Zara

Problem starting Microsoft Forefront Server Protection Eventing Service?

Hi Guys,
Our Exchange 2007 Microsoft Exchange Information Store and Microsoft Exchange Transport services wont start. All dependencies have started except Microsoft Forefront Server Protection Eventing Service. We tried starting it manually but we got this message
(see attached). Any idea how to fix this? Since we cant start Microsoft Exchange Information Store and Microsoft Exchange Transport services, OWA users cant access their emails. Please advise.
Thanks,
Arnel

Hi Arnel,
Based on your description, I understand that the Microsoft Forefront Server Protection Eventing Service can’t
be started.
Please run
services.msc, select the Microsoft Forefront Server Protection Eventing Service and double-click to open it. In the service properties show box, please select Dependencies tab to check which service that it depends on didn’t start.
Meanwhile, would you please let me know which version of the
Forefront for Exchange Server? Please check if you have installed the latest updates to Forefront for Exchange Server. (Such as:
Hotfix Rollup 3 for Microsoft Forefront Protection for Exchange and so on.)
By the way, this issue seems to be more related to Forefront for Exchange Server. Please post it in the Forefront
for Exchange Server forum. I believe we will get a better assistance there.
https://social.technet.microsoft.com/Forums/forefront/en-US/home?forum=FSENext
Hope this helps.
Best regards,
Justin Gu

Security Update for Microsoft visual C++ 2008 Service pack redistributable package


HI, I need help? I received an IMPORTANT UPDATE FOR Windows 8.1 and later drivers, "Security Update for Microsoft C+ + 2008 Service Pack 1 Redistributable Package (KB2538243)". I tried to find more information on this update,
but I did find an update just like it but it was for "2013" instead of "2008". my question is, Do I have to install this exact update? My computer has been updated to windows 8.1.. I don't know if that makes any difference either,
or Can I find an newer version of the "Security Update for Microsoft visual C Service pack Redistributable package ". Also received this one SAMSUNG Electronics Co., Ltd - Other hardware -"SAMSUNG Mobile USB composite Device."
after I had unplugged my phone from the USB port, on laptop. I couldn't find much information on it either an if I really needed it I usually don't have my phone plugged into the USB port on my laptop that was like the second time that it has
happened when the electricity went out to charge it. my question is do I really need to install Visual studio 2008 or newer an do I need the SAMSUNG MOBILE USB composite device and what are they?
   Does anyone know what Microsoft Silverlight (KB2977218) is, is it important and do I need it? Can anyone help me please?
Thank you for your help..
Thanks Tina Maus

Hello Tina Maus,
Do you receive an important update KB2538243? Please share us a screenshot for better analyzation.
As you use the Windows 8.1, it is recommended to install the Visual C++ Redistributable Packages for Visual Studio 2013.
http://www.microsoft.com/en-hk/download/details.aspx?id=40784
It supports Windows 8.1.
Do you use SAMSUNG mobile phone?
And about the SAMSUNG Mobile USB composite Device, to receive better support, it is recommended to contact the SAMSUNG support.
Silverlight is a powerful development tool for creating engaging, interactive user experiences for Web and mobile applications. But if you are not a developer, it is not necessary for you.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

Microsoft Office can't find your license for this application - multiple copies of Office 2013 x32 failing to start, Software Protection Service timing out

We're experiencing a growing problem with our users in several different domains running in to Microsoft Office 2013 x32 'activation' issues. We use KMS for licensing, which works properly, but some of the machines (~20-30 out of 1000+) sporadically
throw the following error:
'Microsoft Office can't find your license for this application. Microsoft Office will now exit.'
We know it's not an issue with the licenses per se, since they work on and off and we can force KMS activation correctly / talk to the KMS servers.
It appears to be an issue with the Software Protection service not starting properly. In Event Viewer, we see the following:
'Software protection service failed to start due to the following error- the service did not respond in a timely fashion.
Event 7000'
This is occurring on a variety of machines in a variety of environments, all fully patched with the latest Office updates. It's inconsistent, and the 'manually restart the Software Protection Service' solution is not viable as it's occurring on many
different workstations. Office repairs have also been unsuccessful.
Has anyone else come across this? Or have any idea why the Software Protection Service might be sporadically failing? Maybe an Office update in the last 2-3 months?
Thanks for any info.

We're experiencing a growing problem with our users in several different domains running in to Microsoft Office 2013 x32 'activation' issues. We use KMS for licensing, which works properly, but some of the machines (~20-30 out of 1000+) sporadically
throw the following error:
'Microsoft Office can't find your license for this application. Microsoft Office will now exit.'
We know it's not an issue with the licenses per se, since they work on and off and we can force KMS activation correctly / talk to the KMS servers.
It appears to be an issue with the Software Protection service not starting properly. In Event Viewer, we see the following:
'Software protection service failed to start due to the following error- the service did not respond in a timely fashion.
Event 7000'
This is occurring on a variety of machines in a variety of environments, all fully patched with the latest Office updates. It's inconsistent, and the 'manually restart the Software Protection Service' solution is not viable as it's occurring on many
different workstations. Office repairs have also been unsuccessful.
Has anyone else come across this? Or have any idea why the Software Protection Service might be sporadically failing? Maybe an Office update in the last 2-3 months?
Thanks for any info.

Hotfix Package 2 for Microsoft Application Virtualization 5.0 Service SP2

Similar Messages

Maybe you are looking for