Hotkey "Strg + Tab" does not work anymore.

Hello everyone. I am having a problem with my browsing experience and was unable to find a solution.
Using the hotkey "Strg + Tab" does not change between Tabs anymore as it should do. I do not recall having changed anything with my browser, keyboard or general PC setup.
The alternate hotkey "Strg + PgDown" still works as intended. So do the hotkeys "Strg + PgUp" and "Strg + Shift + Tab" to change between Tabs in the opposite direction. The latter also confirms that my keyboard is functional and Firefox does receive the input.
I tried updating to a newer version, but apparently I am already running the most current version, which is 32.0.3 at the moment.
Thanks in advance for any helpful comments.

Are you using the en-US Firefox version or another locale?
Do a clean reinstall and delete the Firefox program folder before (re)installing a fresh copy of the current Firefox release.
*Download the full Firefox installer and save the file to the desktop<br>https://www.mozilla.org/en-US/firefox/all.html
If possible uninstall your current Firefox version to cleanup the Windows registry and settings in security software.
*Do NOT remove "personal data" when you uninstall your current Firefox version, because this will remove all profile folders and you lose personal data like bookmarks and passwords including data in profiles created by other Firefox versions.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
*(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure NOT to remove personal data when you uninstall Firefox as that will remove all Firefox profile folders and you lose your personal data.
If you keep having problems then also create a new profile.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

Similar Messages

  • Fox tabs does not work anymore what is up?

    I tried to add some websites to my top sites and it does not work. I still have some previously stored sites left but I cannot add any more.

    Hi!
    From what I read, you are trying to customize the sites that show up in "My most visited" folder in your bookmarks.
    Unfortunately this folder is automated and it's content can't be manually modified. But, you can customize your list of bookmarks with the ones that you want, and even create a My top sites folder that is curated manually.
    You can learn more about bookmarks in the following article: [[Use bookmark folders to organize your bookmarks]]
    I hope it helps.
    Ibai

  • Double clicking to open new tab does not work anymore

    Am I loosing my mind?
    I have been opening tabs like this for years, now it is not working.
    Any help would be appreciated.
    thanks
    Laura

    HI Laura,
    Check Safari Preferences then select Tabs. Make sure your preferences haven't changed for that then select the General tab. Check your tabs prefs there also.
    If nothing is amiss there, go to your Safari menu bar, click Safari / Empty Cache or Command + Option + E on your keyboard.
    If that doesn't help, from the Safari menu bar click, click Safari / Reset Safari. Select the top 7 buttons, click Reset.
    Also, if you have any Safari Extensions installed or Safari third party unsupported add-ons, that could be why you are having problems with your Tabs.
    For troubleshooting third party add-ons, follow the instructions here. http://support.apple.com/kb/TS3230?viewlocale=en_US
    You can access Safari Extensions in the Safari / Preferences pane.
    Carolyn

  • Standard shortcut for "flow" does not work anymore

    Hi there :-)
    The standard shortcut for setting the flow of a brush or stamp does not work anymore. When using shift + 0-9 nothing happens. It works correctly for the opacity when I use 0-9.
    When I turn on the airbrush-mode it's not switching the commands entirely... Flow is still not settable with 0-9 but opacity cannot be set either by shift + 0-9.
    I can access the opacity by hitting "enter" and then use the tab to switch to the flow but that's not what I wanna do.
    Can anyone help my to find out what happened to These commands? The Shift-keys work fine btw... I'm using them for other commands (in and outside of PS)  .
    If anyone knows how to change these standard hotkeys let me know as well.
    Thnx, Michelle

    Which version of photoshop and operating system are you using?

  • Automatic Selected Item of List Builder Component Does not work (anymore)

    Hi all,
    Í'm working with Xcelsius Engage 2008 (version 5.3.2.0) and the automatic selection of an item at runtime of the list builder component does not work anymore. In a previous version it worked very well.
    Here's the case: at runtime I want that the list builder component automatically puts the first item in the list to the destination section and selects it, so that a graph can show the underlying pushed data. In the previous version it worked o.k., but now at runtime the destination section remains empty at startup. If I interactively select an item from the source section to the destination section and update the list builder, the data is shown correctly, but it must done automatically, which worked o.k. in an earlier version of Xcelsius 2008...
    This are my settings of the list builder component (which was running correctly earlier..):
    -at the general tab I defined a range of labels
    -at the general tab I defined 2 data column insertion series
    -at the behaviour-common tab I defined selected items: position mode; items: the first item of the label list; insert items at runtime
    -all of the data comes from an external xml data source
    You can find an example of the visualisation at: http://onderzoek2.evinet.nl/projecten/10169/dynarap.htm. You will see that at start-up there is no item visible and selected in the destination section of the list builder....
    I've tried every combinations of settings, build up the component from scratch, but its not working (anymore).
    Greetings Erik-Jan Vriens

    Hi njnits,
    Print view button is a standard component of Xcelsius: look at it in the IDE
    Exporting to Powerpoint is also a standard functionality, so yes. For this particular dashboard/report all data resides in an external xml-file which have to be accessible for Powerpoint
    All visualisations, not only the table,  in this/report fetch their data from an external xml-file, but a QaaWS-connection will also do the trick. You will have to write this dedicated service. In our case the xml-data is also generated automatically.
    The external data is best defined as a sort of matrix, consisting of approx. 100 columns by 1000 rows. I agree it takes a lot of Xcelsius but it does the job....
    Hopes this info helps....

  • Hi guys, I have a big problem! My bookmark shortcut entry(command D) does not work anymore and do you know by any changes how to undo resetting of Safari? Thnx a million :)

    Hi guys, I have a big problem! My bookmark shortcut entry(command D) does not work anymore and do you know by any changes how to undo resetting of Safari? Thnx a million

    Try troubleshooting the Safari .plist file.
    Quit Safari.
    Open a Finder window. Select your Home Folder in the Sidebar on the left. It has a small house icon. Then open the Library folder then the Preferences folder.
    Move the com.apple.Safari.plist file from the Preferences folder to the Desktop. Relaunch Safari. Try a bookmark.
    If that didn't help, check Safari / Preferences then select the Extensions tab. If you have any installed, turn that off, quit then relaunch Safari.
    If Extensions aren't the issue, reset Safari. From the menu bar click Safari / Reset Safari. Select the top 7 buttons, click Reset.

  • Enter key does not work anymore in address bar after FF update

    After the update the Enter key does not work anymore. Neither when I type the url directly, nor when I select it from the history.
    In short FF has become unusable. Now I need to install and use a less crappy browser. Extremely sloppy, amateuristic update.

    see if this is helpful : go to Tool > Options > Advanced > General tab > Browsing and '''Uncheck''': "Use hardware acceleration when available" .

  • Satellite U400 - the webcam does not work anymore

    Hello guys here is my sudden probloema!
    About a year ago I purchased a laptop
    TOSHIBA - Satellite U400
    with s.o. WinVista 32bit and with integrated webcam chicony etc. ....
    For a year, everything worked correctly, but for some days now, the webcam does not work anymore.
    As soon as I try to open it, a message of management software cam that says "Webcam driver open fail, please restart or computer room"
    I tried to do it all: aggioronato and downloaded the drivers from toshiba, uninstalled the program and re installed the webcam ....! updated bios notebook ....! useless!
    the strange thing .. well that going into device manager ... the webcam is not there ....! but if the launch seems to open just then check quell caz ... Warning!!
    Gan you help me?
    Graziee

    Are you familiar and comfortable with LINUX LIVE bootable discs to load an alternative operating system with unobtrusive but extensive Toshiba device support so you can determine if your webcam hardware is ruined or if the problem is software and possibly solved reinstalling Windows ?
    At this point, you're pondering less time consuming but more expensive choices such as buying another web cam, or another computer and you might be temporarily borrowing someone else's web cam / using a non preferred spare web cam that isn't optimal for your needs.
    Continuously downloading software, registry cleaners, and repeatedly reinstalling drivers will eventually ruin your Windows installation and consume more time than you've wasted so far and still doesn't guarantee to fix your malfunction.

  • TouchPad lock key does not work anymore on Dell XPS L401X

    Hi everyone,
    On my Dell XPS L401X laptop, there is a key to lock/unlock the touchpad. It used to work fine on Windows and on new fresh install ArchLinux, but now it does not work anymore. If I remember correctly, I did not change, configure any shortcut so far.
    Any hint to fix this problem?
    Many thanks!
    Tinh

    Try mapping the button as shown here: https://wiki.archlinux.org/index.php/To … are_Toggle
    I'm sorry i can't help more.

  • TV does not work anymore on Qosmio G10

    Good morning,
    TV does not work anymore, may be due to an update. It has been working OK before.
    When selecting TV option 'TV direct ' with MCE menu, I get the following error message: "necessary files for video display are not installed or do not work properly, restart MCE or the computer". Restarting MCE and / or G10 does not solve the problem.
    -Intervideo WinDVD creator is installed.
    -TV PCI tuner seems to work properly (as per hardware status)
    Which files can be missing? What needs to be done?
    Any help, suggestions, well appreciated.
    Thank you to anyone answering this message.

    Hello Luciano
    Like you know on this way it is not easy to give you precise answer because we dont know what did you done exactly with your Qosmio.
    Please try to use System restore tool at first and roll back the operating system to earlier time. Maybe this will help you and the MCE configuration will be as before.
    Try it at first.

  • HT204135 I update my Mac to version 10.9.2 and now my printer does not work anymore. I did all the software updates and I do not understand why my mac does not recognize the printer anymore?

    I update my Mac to version 10.9.2 and now my printer does not work anymore. I did all the software updates and I do not understand why my mac does not recognize the printer anymore?

    Go to the website of the manufacturer of your printer and check to see if they have released an updated driver for your particular model.

  • While updating my ipad to new software through itunes it got stuck and does not work anymore - it just displays the screen with symbols of itunes and the cable to connect to it - help - what should i do?

    while updating my ipad to new software through itunes it got stuck and does not work anymore - it just displays the screen with symbols of itunes and the cable to connect to it - help - what should i do?

    Disconnect the iPad, do a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. The screen will go blank and then power ON again in the normal way.] It is 'appsolutely' safe!, reconnect and follow the prompts.
    If that does not work then see here http://support.apple.com/kb/HT1808

  • I have recently upgraded from my iphone 5 to a new phone. My iphone 5 's touch screen does not work anymore. I need to backup my phone, but I can't do it on itunes without my password. Everything besides screen is ok. Is there a way around it? :(

    I have recently upgraded from my iphone 5 to a new phone. My iphone 5 's touch screen does not work anymore. I need to backup my phone, but I can't do it on itunes without my password. Everything besides the screen is completely fine-the screen will not recognize my finger anymore. I am not trying to fix the phone, but I need to have my contacts. The pictures have already synced, but I need my password to do a full backup. Unfortunately, I can't type in my password. Is there any way around it? If I take my phone to the apple store, will they be able to help me? I am not willing to replace the screen just to do this, however, so that is out of the question. 

    Someone else may have a workaround, but, as far as I know, if you cannot interact with the screen on the iPhone, there is no way to unlock it so you can get to your contacts.
    Were you saving them to iCloud by chance? If so, you can restore them to your new phone.
    ~Lyssa

  • After update Mac OS 10.9.1 Trim Enabler does not work anymore!

    After updating from Mac OS 10.9.0 to 10.9.1 the program Trim Enabler does not work anymore and my 4 SSDs from Samsung and Kingston are no longer supported.
    What can I do?
    Should I scrap my SSDs?
    Why does Apple do such things?
    Will Apple that I switch to Windows? There Trim works with all SSDs and BluRay will not boycott!

    Apple does not support TRIM for SSDs that were not factory
    installed and TRIM Enabler is a hack to get around this.  Any
    hack is always subject to being disabled, or worse, with any
    system update whether it is OSX or Windows.

  • Mac os 10.4.10 software update problem -- my mac does not work anymore :(

    hello!
    i have a powerbook G4- PPC. just today, i did a software update of my OS to 10.4.10 (it was the available update version according to the automatic uptae) and during the final stage of the installation, it says "a problem was encountered...installation package is moved to trash"
    when i browsed my mac, my apps does not work anymore!!! they just bounce from the dock when i clicked it but it won't open any window. i emptied the trash and restarted my mac but sadly, it just boot but won't continue to the log in part, only in the silver window with the apple logo and mac os x tiger... and the mouse just turns into the color wheel. i waited for 30 mins and nothing happened.
    i don't have a startup disc because the mac is a gift and it was long time ago. is ther a software i can use to fix or revert the changes of the unsuccessful OS update? why is there always a problem when i do OS update? isn't apple software stable?
    My mac problems' driving me crazy!!!

    There are no guarantees, but following this procedure when installing updates and upgrades on your Mac will go a long way towards avoiding unpleasant after effects and ‘post-update stress disorder’.
    It is also worth noting that it is an extreme rarity for updates to cause upsets to your system, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
    So before you do anything else:
    If you can, make a full backup first.
    Turn off sleep mode for both screen and hard disk.
    1. Repair Permissions (in Disk Utility)
    2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
    At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
    3. Download the correct version of the COMBO update from the Apple download site. If your car runs on gasoline you would not want to fill the tank with diesel, so don’t try to install the PPC updater on an Intel Mac!
    If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
    Using the Combo updater ensures that all system files changed since the original 10.4.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.4.9 to 10.4.10. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
    Now proceed as follows:
    4. Close all applications.
    5. Unplug all peripherals except your keyboard and mouse.
    6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
    7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
    8. Once your Mac is awake, repair permissions again, and you should be good to go!
    If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious!
    9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them 10.4.10. compliant. Give them a weeks or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 3.
    N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
    Lastly, Apple's own article on the subject of Software Update may also be useful reading:
    http://docs.info.apple.com/article.html?artnum=106695

Maybe you are looking for