Hotkeys for Keyframe timeline centering in the Viewer ?

Hey all,
I'm trying to work with Keyframes in the Viewer. Problem is I can never zoom in on so I can see both IN & OUT keyframes. I'd like to be able to center the keyframe timeline kinda like I do the sequence timeline, ie.. SHIFT+Z
The keyframes just seem so cramped, especially the IN point.
Any tips ?
Thanks to all replies

Do you know that you can also drag any TAB from the viewer to the timeline. (It will only drop in the viewer if you drag the tab to the tab section of the timeline)
Once there it opens just like a sequence and you have the entire length of the timeline to work in where you can use the standard sequence "zoom in and out" shortcuts.
rh

Similar Messages

Displaying Description for SAP Table Field in the View

Hi
We are working on a HANA implementation Project Where we have a requirement to build View on HR tables.
Issue: When i join HR infotypes (tables ) in the view it is getting only Technical names and not descriptions. i have used Semantics option which is available and still it doesn't bring description in to the View.
Please let me know if any one has solution or work around for this.
We have more than 100 fields in the View so maintaining Descriptions manully will take lot of time.
Regards
Venkat

Hi Chandra
Yes, We have Description available in the sourece tables.
We are connected to HANA Suite and tables in ECC having Descriptions.
Regards
Venkat

Summary for all Profit Centers in the Profit Center Report

There should be a summary for all Profit Centers in Profit Center Report. Now there is only summary by Sort Code but should be also summary for all Sort Codes.

Alex is right if we are dealing with R/3 and thats not the way you look in BW.
normally org. levels are not used in BW. unless you created one using ORG_LEVEL_CREATE( normally nobody does that in BW or may be I never heard of it).and that is the reason we create RSR objects. so if you look in AGR_1252
with VARBL $PRCTR you won't get anything.
$PRCTR might be your custom field I guess. Identify the RSR auth. objects which has this field. you already mentioned you did that and you have 6 auth. objects.
you might have made 0PROFIT_CTR as auth. relevant and created those 6 RSR auth.objects.
To get the list of roles where those RSR objects getting used and the profitcenter values in those roles, I would say goto AGR_1251, and in OBJECT field give your 6 RSR objects in the multiple selection tab which you can see on the right side of that field. you will get the list.
regards
Message was edited by:
        Keerti Vemulapalli
Message was edited by:
        Keerti Vemulapalli
Message was edited by:
        Keerti Vemulapalli

View audio wave form in A1 and A2 etc in the timeline instead of the Viewer

It's likely this is an amateur question buuut -
Is there anyway to get the audio wave form to show in the Audio layers in the timeline. The only way I've seen to adjust and play with audio is when I double click on one of the tracks and then the audio tab in the viewer will open. I want to be able to see waveform in the timeline and then add or remove markers and adjust from the timeline -
There's got to be some way to adjust audio and play and stop so that you can watch the video and hear audio changes as you tweak it at the same time.

SEQUENCE--> SHOW AUDIO WAVEFORMS

ER for topic: IR, safe/keep the view of the export HTML page like the IR is

Hello Dev-Team,
As Tobias has recommended I would like to ask you to open an ER for this case:
I would like to save (download) a somehow aggregated (controll group) IR as HTML to hand over it to a customer.
Is there any way to safe/keep the view of the export HTML page like the IR layout is?
Thank you in advance.
Andre
see: IR, safe/keep the view of the export HTML page like the IR layout is?

Tobias Arnhold wrote:
You could create an enhancement request: http://apexblogs.info/pls/apex/f?p=118:28
Do APEX Dev team look here for enhancement requests? Or just Dimitri passes on information..
Ta,
Trent

HT201403 It would be very helpful for Apple to re-instate the view as icon option for a pdf file in an email on the right click menu? As far as I can see no easy way for a basic user to get this back?

Would be great for Apple to reinstate the pdf as icon in mail - but using the right click menu. It seems to have gone - and as a basic user there seems to be no simple solution - I used the rich/plain text swap but it didn't work...
Apple - we need you to solve!

http://www.apple.com/feedback/macosx.html
It's highly doubtful that Apple will change this in Mac OS X 10.7 since that OS version has now been discontinued for quite some time. Whether they will change that in OS X 10.9 or a future version I can't say.
If this is a serious issue for you, you can look into Attachement Tamer:
http://lokiware.info/Attachment-Tamer
It's not free, but it addresses much more than the issue of PDFs appearing as images, not icons, so it might be worth the price.
Regards.

Is there a way to change the hotkey for starting firefox in safe-mode?

The current default hotkey is shift. Holding it when starting firefox will start it in safe mode (true story). My super duper favorite handy windows hotkey for starting programs pinned to the task bar in windows 7 is windows_key + shift + #, and that conflicts with the firefox setting, and i always end up starting firefox in safe mode because im that lazy.

Greetings!
I'm an irssi user, and I have awesome mouse gesture addon for it, and I'm afraid I can't live without it anymore.. But it requires Shift key for opening links, therefore Firefox, as my default browser, always starts in Safe mode :(
I'm not a programmer, easiest workaround would be modifying the irssi addon, but I suck on that, too.
If there's a way to bypass Safe Mode in Firefox, or at least a way to change the Shift key to something else, that would make my miserable life a tad easier.

Dragging a large still image from the browser into the viewer crashes FCP

Okay, I've not seen this problem until just a couple days ago but was wondering if it was just me or if everyone has this problem? I've found a work-around, but let me explain the problem first.
I'm creating a growing up photo montage. I scanned all of the pictures myself at 300 dpi (as I've always done in the past) and saved them as TIF files. Some pictures as relatively small, i.e. 3.5 mb is size and do just fine, but it appears anytime I drop a picture into the viewer in preparation for the the timeline, it will crash FCP if the image file is any larger than about 5 or 5.5 MB. Now I know there is a limit on the resolution of a still and it shouldn't be any larger than 4000 pixels in either direction, but that is not my problem, the problem appears to occur with large files. I've used large still files before in past projects without any problem, so this is why I'm stumped. I've went as far as trashing my preferences, but that didn't change anything. I've even tested a still image from a past project that was something around 9 MB (or was it 19 mb?) in any case, it also crashed FCP but... I've used that picture before in past projects without any problem. I even created a new test project just in case my project file itself had a problem.
My work-around is to simply drop the still image from the browser directly into the timeline, thus bypassing the viewer. This works every time without a hitch. I can even double-click on the still now setting in the timeline to load it into the viewer so I can add effects or keyframes or whatever without any problems (thank goodness). So, has anyone else experienced this problem or is it just me?

Is this image saved in a colorspace mode that is anything other than RGB?
CMYK & Grayscale images will cause problems.
Some light reading regarding your choice of 300 dpi: http://www.scantips.com/no72dpi.html
Unless you plan on panning and zooming your images, the best procedure is to use one of the video preset templates in Photoshop and paste your content into it. Scale and position using the Transform controls. For best results save as a TIFF without compression. Don't forget, always in RGB colorspace.

How do you change the view for the timeline in a movie

not sure in new version how to do it

Not sure what you mean by the "view" for the timeline.
You can choose View>Wrapping Timeline to wrap the timeline.
Double cliccking a clip in the timeline will open the Clip Trimmer for precise work.
Matt

When using Final Cut Express, the video in the Viewer window looks fine, but when I insert the video into the Canvas Timeline it appears to lose resolution, and look fuzzy and blurry. Are there preferences or settings for the Timeline that cause this?

When using Final Cut Express, the video in the Viewer window looks fine, but when I insert the video into the Canvas Timeline it appears to lose resolution, and look fuzzy and blurry. Are there preferences or settings for the Timeline that cause this?

Thanks David. I had to convert the mts file to Quick Time (using AunSoft Conversion software) before I could import it into Final Cut Express. And I made sure I kept the size of movie (720 X 480 with letterbox) to compliment what I set my Panaconic AVCCAM video recorder at (720/60). Even after I fully render it, it still looks fuzzy in the Canvas window at the right that plays what I have editing down in the Timeline. A friend that edits some using Final Cut Pro helped me to narrow things down to this problem. This is also wierd. If my Viewer window at the left is set to 200% to get the person's head the same size in the Canvas window at the right we needed to put it to 400%. Does this make any sense. We think we need to control the Time line resolution somehow but cannot find any options from my manual, or the help, or in the various drop down menus. Do you have any clue? What is going on?

Hi, After I try to load either an existing or new project in Adobe Premier Elements 9 I just get a blank grey screen with none of the timeline, etc. boxes on view. This has suddenly happened, one day OK next not! At the top of the screen I get the normal

Hi, After I try to load either an existing or new project in Adobe Premier Elements 9 I just get a blank grey screen with none of the timeline, etc. boxes on view. This has suddenly happened, one day OK next not! At the top of the screen I get the normal Pre icon, File, Edit, Clip, etc.
I am planning on purchasing Premier Elements 13, would it be better if I bought a new program rather than download an upgrade, just in case the upgrade doesn't load properly due to the error with my existing program?
If I the deleted Premier Elements 9 on my PC would I lose all my existing videos that were produced using Premier Elements 9 or would they be saved so that they can still be worked on in Premier Elements 13?
Does Premier Elements 13 work with Windows 7?
Thanks
Terry

Premiere Elements 13 absolutely works with Windows 7!
In fact, I'd highly recommend you download the free trial and give it a test run.
Meantime, go to Windows Update and make sure you have all of the latest Windows updates, including those that don't install automatically. Then go to the nVidia or ATI site and ensure you have the latest driver for your graphics card, and go to Apple.com and ensure you have the latest version of Quicktime, per the program's requirements.

My web page centers in the design view, but not when viewed on line.

I am new to web design and of course, to this forum. I had some background in VBA and Fortran, so when the original designer left, I was the only one in the organization willing to tackle the website and try to teach myself how to make it work and keep it current. We were financially in the red at the time, so hiring outside help would have been almost impossible. We are finally breaking even now, which was our goal as a non-profit.
So I inherited the computer and the responsibility for maintaining the website at a non-profit organization for kids in Florida a couple of years ago, and I am doing pretty well with it so far, even though my depth of knowledge is very shallow. AsI said before, I am entirely self taught, mostly by the trial and error method, so please excuse what is probably a very basic question.
My website is FloridaBandTournament.com.
The site is working pretty well for my users, but from an appearance standpoint, the pages always are on the left side of the screen. I would like to center the page(s) in the screen so that it looks a little better. They are on a black background - not sure how the background got there, but it is working fine for me. When I tried to center the pages, I googled my way to the statement text-align: center, and after placing it a couple of different places in the code, it suddenly seemed to work, at least in the in Dreamweaver 8 (I also inherited the software, which is I know is old, but so am I - will be 70 soon, and do my work for free for the organization). But when I went to a couple of different browsers, it still displayed the website on the left. I tried Firefox and IE. I am at a loss as to what to do.
When I found this forum, I thought maybe somebody could help me know what to do to make this centering of the page happen in a simple way for this old geezer. I would sure appreciate it.
I do not know what I should be communicating to you, but I thought if I sent the code in the body, it might help.
The body code is as follows;
body [
    background-image: url(file:///C|/Documents and Settings/user/Application Data/Macromedia/Dreamweaver 8/configuration/ServerConnections/www/images/background.gif):
   background-color: #000000;
   margin-top: 0px;
   margin-left: 0px
   margin-bottom: 0px
   margin-right: 0px
text-align:center
None of the pages in the active website have this code yet - I have a trial page that I am testing. The trial page can be accessed from the link at the bottom of the 'links' page for 'Show Host Infoormation' (the mis-spelling is temporary and intentianal so I can find the darn test link myself when I want to).
I would be glad to provide any information that might help someone understand what I have and what I am trying to do, but again, I am self-taught so I have little understanding of the technical terms. I would sure appreciate any help. Thanks in advance.
Bob

First obviously make a back-up of the pages/s.
Go into code view in Dreamweaver and find the below html. Its near the top of the page after the css. You don't need to first table <table> </table> so you can delete that. It's the second table that we are interest in. See below I have added id="pageWrapper" to the opening <table tag.
<table width="795" border="0" cellpadding="0" cellspacing="0">

<tr>
    <td width="795" height="19" valign="top" bgcolor="#000000"> </td>
</tr>
</table>
<table id="pageWrapper" width="795" border="0" cellpadding="0" cellspacing="0">

Then add this to your css styles in the head setcion of the page.
#pageWrapper {
    margin: 0 auto;
You'll have to do this for each page of the site you want centered, which could be a pain if you have many pages.
Also your background image is linked to your local computer thats why you are not seeing it but have a black background instead:
body {
    background-image: url(file:///C|/Documents and Settings/user/Application Data/Macromedia/Dreamweaver 8/Configuration/ServerConnections/www/images/background.gif);
    background-color: #000000;
    margin-left: 0px;
    margin-top: 0px;
    margin-right: 0px;
    margin-bottom: 0px;
If you want the image to appear amend the link to as below:
body {
    background-image: url(images/background.gif);
    background-color: #000000;
    margin-left: 0px;
    margin-top: 0px;
    margin-right: 0px;
    margin-bottom: 0px;

Toolbar button/hotkey for "show cover page in two page view" in Acrobat X?

In Acrobat X, how about make a toolbar button/hotkey for "show cover page in two page view"? I find toggling this option to be useful for changing up the order of adjacent pages in magazines/books in which a two page spread has to match for a full large picture. Due to frequent toggling, I would like a button/hotkey for this for easier access.

Hotkeys for existing menu items are not modifiable, but you can add a scripted button which toggles it with the following code:
if (layout.substr(-5)=="Right") layout = layout.replace("Right","Left");
else layout = layout.replace("Left","Right");
For info on how to add a button with a folder-level script, see the Acrobat SDK documentation. Scripted buttons will appear in a new panel on the tools pane in Acrobat X, not on the tool bar.

I'm trying to reverb an audio clip in my timeline and I can't find the effect tab in the browser to drag to my audio clip to reverb. I can reverb the clip in the viewer but can't it won't drag to the timeline. I'm using FCE

I'm trying to reverb an audio clip in my timeline and I can't find the effect tab in the browser to drag to my audio clip to reverb. I can reverb the clip in the viewer but it won't drag to the timeline. I'm using FCE

You cannot drag the effects themselves to the timeline. You add them to a clip in the Viewer, just as you have done.
If the clip was already in the timeline when you opened it in the Viewer (by double-clicking it in the timeline to open it in the Viewer) and then added the reverb effect, there is nothing further to do, you have added the effect to the clip. You don't drag it back to the timeline.
You only have to drag the clip to the timeline if the clip was not already in the timeline (for example, if you opened the clip from the FCE Browser; or set different In and Out points in a master clip to use a different portion of the master clip in a different location in your timeline).
Depending on the effect you add, you may have to render the timeline after adding the effect. But I don't think reverb requires immediate rendering. One other note, you said you were working with an audio clip ... audio clips need to be AIFF (not MP3 or something else) and preferably 16-bit stereo.

Clip from Timeline not showing up in the Viewer

why in Final Cut Pro when i have a clip in the time line and i want to add an effect or slow the clip down or speed it up, i double click on my clip in the timeline and it doesn't show up in the Viewer as only the clip. it is the entire footage that i have captured with my clip that want to edit.
the only thing that i want to edit in between the two arrows ______ ^^^^.
but when i double click the clip when its in the TimeLine it just shows up in the viewer along with the entire imported clip along with it.

That's what Final Cut does. Anything outside those arrows are the handles for the clip. It's not going to affect your master clip if you add your effects or filters. (Unless you actually add them to it specifically). If you were to subclip your footage it may act more like what you are expecting.

Hotkeys for Keyframe timeline centering in the Viewer ?

Similar Messages

Maybe you are looking for