Hotkeys no longer working - ThinkPad Edge 14, Windows 7

Hello,
my hotkeys to control volume, brightness, wifi, microphone, webcam no longer working. Some hotkeys (previous track, play/pause and next track) still works fine. I had this problem two times before and in this cases bios update helped. But now, i have newest BIOS version and i can't update BIOS...Simple restore BIOS properities to default didn't work...I have exactly the same problem on Windows 7 Professional 64bit and Ubuntu Linux 10.10 32bit. Any ideas how to fix this or i must use my warranty?
I'll be very grateful for any advice!
Thinkpad Edge 14 O578KNG

f1 at startup, into the bios.  config should be highlighted, enter.  power, enter.   make sure hibernate by timer is enabled. f10 to save and exit. yes, boot to windows.
T430u, x301, x200T, x61T, x61, x32, x41T, x40, U160, ThinkPad Tablet 1838-22R, Z500 touch, Yoga Tab 2 Windows 8.1, Yoga Tablet 3 Pro
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
If someone helped you today, pay it forward. Help Someone Else!
English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

Similar Messages

  • Microphone no longer works after upgrade to windows 8.1

    After upgrade to windows 8.1 my internal microphone no longer works.
    I tried installing updates suggested in other posts with similar driver problems but they did not work.
    HPSupportSolutionsFramework-en-11.51.0048 did not work.
    My internal microphone is IDT High Definition Audio Codec
    When I go through the control panel  and look at it - it shows a status of "not plugged in"
    Please help 
    thanks

    OK I am a little confused.
    There has been no response on this subject in over a week. Not since I responded to your questions regarding product name and number.
    However I just received the following email from you:
    Hello gordml,
    The questions you posted on the HP Support Forum recently received one or more answers.
    Question: Microphone no longer works after upgrade to windows 8.1
    Date: Sun Dec 21 01:01:56 PST 2014
    View the answer(s).
    Did this reply resolve your post or question?
    If yes, then share the good news! Let others know this reply was helpful by accepting this solution.
    You can also show your appreciation by giving kudos.
    We appreciate your feedback. It's what keeps our community such a helpful, vibrant place for our members.
    Thanks for being a member!
    The HP Support Forum Team"
    Why would this be sent to me if there has been no recent replies on this issue?

  • RoboForm Lite no longer works for Firefox 17 windows 7 and server 2008r2

    Greetings,
    RoboForm Lite no longer works for Firefox 17 windows 7 and server 2008r2 I tried to reinstall but none of the tabs function . Thank you for your assistance

    '''roboform_firefox:'''
    The original poster (OP) reported his/her OS as Windows 7 in the body of the question, therefore, your solution would be of no use to the OP. You can also see the OS for the system used by the OP to post the question to the right of the original question in this forum .
    Additionally, using an old version of Firefox is ill-advised as old versions contain uncorrected security vulnerabilities. Roboform has been very good lately in keeping their products updated for new Firefox releases and any problems with their products should be reported to them so that they can address any issues and release an update if needed.

  • Spaces Hotkeys no longer work with 10.5.3 update.

    Can anyone help me here? I've tried everything I can think of but nothing works. It's like the Finder won't recognize the hotkeys for spaces anymore. F8 works to bring the windows up but I can no longer use the control-arrow keys to move between spaces. I've tried re-assigning to different keys and still nothing. I can't be the only one experiencing this....
    frustrated,
    -J

    Same exact problem I have been having. I just realized how efficient spaces is a few days ago. I had it set up, and finished assigning programs to them. I download the update today, and NO MORE! I have gone through every other potential conflict, and nothing. This issue really must be with the update. Looks like apple has another issue to rectify in the next update. Please, Apple...fix this soon! I feel I'm losing ground.

  • Sound no longer works after upgrade to Windows 8.1

    System:
    Operating System
    Windows 8.1 64-bit
    CPU
    Intel Core i5 3330 @ 3.00GHz
    23 °C
    Ivy Bridge 22nm Technology
    RAM
    8.00GB Dual-Channel DDR3 (11-11-11-28)
    Motherboard
    LENOVO MAHOBAY (SOCKET 0)
    18 °C
    Audio
    ASUS Xonar DGX Audio Device
    I sucessfully upgrading to Windows 8.1 and everything was functioning after the upgrade.  However, after the first time I restarted my system after the upgrade the intergrated soundcard no longer worked.
    I attempted to remove and reinstall the RealTek audio driver, downloading the newest 8.1 compatible driver from the Lenovo support site.
    The drive refused to installed, either via the executable or by manually installing the driver through a device manager upgrade.  
    So I attempted to install a stand alone soundcard, to no success.   
    In device manager this is displayed for both the integrated motherboard audio and the new Asus sound card:
    Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code
    52)
    If I disable the driver driver signature enforcement, neither audio option works.  Instead I get this error in device manager:
    "Windows cannot load the device driver for this hardware. The driver may be corrupted or missing.
    (Code 39)"
    Attempting to update the driver in device manager, Windows tell me I am on the most up-to-date, recommended driver, yet at the same time refuses to
    allow it to function.
    Extremely frustrating.
    Any help would be greatly appreciated.

    I have also attempted to clear out the registry Upper/Lower Filters to no success.
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E96C-E325-11CE-BFC1-08002BE10318}
    At that registry key, in the right window, is there, under "Name", either an UpperFilters orLowerFilters value?
    If so, for each of the UpperFilters and/or LowerFilters value, what is listed under "Data"?
    There could be an improper entry at one of these values which may be causing the problem.

  • HP Truevision HD web cam no longer working with Skype since windows 8.1 update

    Hi guys,
                     A major annoying problem as occured since i updated to windows 8.1 my web cam no longer works in skype, it works for everything elese youcam etc just not skpye, audio is working fine too. When i go into settings the programmes freezes and eventually crashes, I can see my webcam listed in skype but thats it, the bottom half of the pane is missing too it cuts out in the middle of clear history, rolled back the driver and it works but messes everything else up. Please help i am ripping my hair out..... thank you

    odizzle7,
    Welcome to the HP Forum.
    Skype does run on Windows 8.1, although you may need to update Skype to at least version 6.16.0.105
    If you have more issues, please do consider opening a New Post of your own.
    This Thread is from last year and is not monitored by our Experts team.
    Click the Kudos Thumbs-Up to show you appreciate the help and time from our Experts.
    Although I strive to reflect HP's best practices, I do not work for HP. 
    Click Accept as Solution when the Answer is a good Fix or Workaround!
    Kind Regards,
    Dragon-Fur

  • Flash Player No Longer Works on Macintosh or Windows

    I have installed, reinstalled, done the permissions thing,
    tried everything - but Flash Player no longer works.
    Many of my friends have the same problem.
    I wish Adobe had never bought Macromedia. Macromedia was
    pretty perfect. I never EVER had a problem with flash before Adobe
    got involved.
    I have to install the flash player every single time I want
    to open up a browser now.
    I have a brand new MacBook Pro Intel, 15 inch - new OS,
    etc,....
    I've read lots of grief from windows users in these forums
    who are experiencing the same problem.
    Has anyone else had this problem on a Macintosh? Have you
    found any solutions?
    Any response would be greatly appreciated.
    much thanks

    It definitely appears to be a flash related issue, more then the browser, as i've tried different versions of firefox and chrome and they all have the same problem with the newer versions of flash

  • [SOLVED] ACPI handler.sh no longer working (Thinkpad X60 Tablet)

    Hello there,
    I recently did a few updates on my system to reduce power usage and get hdaps working. For some reason one of these changes must have broken ACPID in some way so that what I wrote in handler.sh no longer has any effect when I e.g. press the configured buttons to lock my screen or shut down, but I have no clue which.
    I'm not really familiar with where ACPI and ACPID keeps all their logs either, and which parts in there might mean something for me. I don't even know how I can check if ACPI is running properly and just ACPID isn't, for instance (both are running thought, confirmed with ps -A).
    Here's what I can remember of what I did:
    -full system update
    -install cpufreq to redcude power usage with acpi_cpufreq
    -install HDAPS with Thinkpad driver, as described on the Wiki
    -tweak my laptop-mode settings, e.g. disable VGA output when in laptop mode
    -enable AHCI for my hard drive in kernel image and BIOS
    Would be great if you could help me troubleshoot this somehow, as I really don't have a clue on how to fix this. Here's some output that might be helpful for starters:
    cat /etc/acpi/handler.sh
    #!/bin/sh
    set $*
    case "$1" in
    button/power)
    #echo "PowerButton pressed!">/dev/tty5
    case "$2" in
    PWRF)
    #Power off
    shutdown -h now
    logger "ACPI action undefined: $2"
    esac
    ibm/hotkey)
    #echo "Display swiveled">/dev/tty5
    case "$2" in
    HKEY)
    case "$4" in
    00005009)
    #Swiveling down
    /bin/sh /etc/acpi/actions/swivel-down
    0000500a)
    #Swiveling up
    /bin/sh /etc/acpi/actions/swivel-up
    00001002)
    #Lock screen
    xscreensaver-command -lock
    #run_once xtrlock &
    00001004)
    #Standby button
    xscreensaver-command -lock ; s2ram
    00001005)
    #Network button
    /etc/rc.d/net-auto-wireless restart
    00001009)
    #Reboot
    shutdown -r now
    00007000)
    #WLan button switched
    /etc/rc.d/net-auto-wireless restart
    fi
    esac
    esac
    button/sleep)
    case "$2" in
    SLPB) echo -n mem >/sys/power/state ;;
    *) logger "ACPI action undefined: $2" ;;
    esac
    ac_adapter)
    case "$2" in
    AC)
    case "$4" in
    00000000)
    #laptop mode should take care of this alone!
    #/etc/rc.d/laptop-mode start
    00000001)
    #/etc/rc.d/laptop-mode stop
    esac
    *) logger "ACPI action undefined: $2" ;;
    esac
    battery)
    case "$2" in
    BAT0)
    case "$4" in
    00000000) #echo "offline" >/dev/tty5
    00000001) #echo "online" >/dev/tty5
    esac
    CPU0)
    *) logger "ACPI action undefined: $2" ;;
    esac
    button/lid)
    #echo "LID switched!">/dev/tty5
    case "$2" in
    LID)
    if [[ `cat /proc/acpi/button/lid/LID/state | awk '{print $2}'` = "closed" ]]
    then
    #run_once xtrlock &
    xscreensaver-command -lock
    fi
    esac
    logger "ACPI group/action undefined: $1 / $2"
    esac
    dmesg | grep acpi
    BIOS-e820: 000000007f6d0000 - 000000007f6df000 (ACPI data)
    BIOS-e820: 000000007f6df000 - 000000007f700000 (ACPI NVS)
    modified: 000000007f6d0000 - 000000007f6df000 (ACPI data)
    modified: 000000007f6df000 - 000000007f700000 (ACPI NVS)
    ACPI: RSDP 000f67c0 00024 (v02 LENOVO)
    ACPI: XSDT 7f6d11e8 0008C (v01 LENOVO TP-7J 00001140 LTP 00000000)
    ACPI: FACP 7f6d1300 000F4 (v03 LENOVO TP-7J 00001140 LNVO 00000001)
    ACPI Warning: 32/64X length mismatch in Gpe1Block: 0/32 (20090903/tbfadt-526)
    ACPI Warning: Optional field Gpe1Block has zero address or length: 000000000000102C/0 (20090903/tbfadt-557)
    ACPI: DSDT 7f6d1690 0D56F (v01 LENOVO TP-7J 00001140 MSFT 0100000E)
    ACPI: FACS 7f6f4000 00040
    ACPI: SSDT 7f6d14b4 001DC (v01 LENOVO TP-7J 00001140 MSFT 0100000E)
    ACPI: ECDT 7f6debff 00052 (v01 LENOVO TP-7J 00001140 LNVO 00000001)
    ACPI: TCPA 7f6dec51 00032 (v02 LENOVO TP-7J 00001140 LNVO 00000001)
    ACPI: APIC 7f6dec83 00068 (v01 LENOVO TP-7J 00001140 LNVO 00000001)
    ACPI: MCFG 7f6deceb 0003C (v01 LENOVO TP-7J 00001140 LNVO 00000001)
    ACPI: HPET 7f6ded27 00038 (v01 LENOVO TP-7J 00001140 LNVO 00000001)
    ACPI: SLIC 7f6dee62 00176 (v01 LENOVO TP-7J 00001140 LTP 00000000)
    ACPI: BOOT 7f6defd8 00028 (v01 LENOVO TP-7J 00001140 LTP 00000001)
    ACPI: SSDT 7f6f2603 0025F (v01 LENOVO TP-7J 00001140 INTL 20050513)
    ACPI: SSDT 7f6f2862 000A6 (v01 LENOVO TP-7J 00001140 INTL 20050513)
    ACPI: SSDT 7f6f2908 004F7 (v01 LENOVO TP-7J 00001140 INTL 20050513)
    ACPI: SSDT 7f6f2dff 001D8 (v01 LENOVO TP-7J 00001140 INTL 20050513)
    ACPI: Local APIC address 0xfee00000
    ACPI: PM-Timer IO Port: 0x1008
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    Using ACPI (MADT) for SMP configuration information
    ACPI: HPET id: 0x8086a201 base: 0xfed00000
    ACPI: Core revision 20090903
    ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    ACPI: bus type pci registered
    ACPI: EC: EC description table is found, configuring boot EC
    ACPI: Interpreter enabled
    ACPI: (supports S0 S3 S4 S5)
    ACPI: Using IOAPIC for interrupt routing
    ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
    ACPI: Power Resource [PUBS] (on)
    ACPI: ACPI Dock Station Driver: 3 docks/bays found
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
    PCI: Using ACPI for IRQ routing
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp: PnP ACPI: found 11 devices
    ACPI: ACPI bus type pnp unregistered
    acpi device:01: registered as cooling_device0
    ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
    ACPI: Lid Switch [LID]
    ACPI: Sleep Button [SLPB]
    ACPI: Power Button [PWRF]
    i915 0000:00:02.0: power state changed by ACPI to D0
    ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
    ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
    ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
    ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
    ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
    ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
    ACPI: SSDT 7f6f1ccc 001FE (v01 PmRef Cpu0Ist 00000100 INTL 20050513)
    ACPI: SSDT 7f6f1f4f 006B4 (v01 PmRef Cpu0Cst 00000100 INTL 20050513)
    ACPI: SSDT 7f6f1c04 000C8 (v01 PmRef Cpu1Ist 00000100 INTL 20050513)
    ACPI: SSDT 7f6f1eca 00085 (v01 PmRef Cpu1Cst 00000100 INTL 20050513)
    ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
    uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
    uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
    ACPI: Thermal Zone [THM0] (56 C)
    ACPI: Thermal Zone [THM1] (59 C)
    ACPI: AC Adapter [AC] (on-line)
    ACPI: Battery Slot [BAT0] (battery present)
    thinkpad_acpi: ThinkPad ACPI Extras v0.23
    thinkpad_acpi: http://ibm-acpi.sf.net/
    thinkpad_acpi: ThinkPad BIOS 7JET29WW (1.14 ), EC 7JHT13WW-1.04
    thinkpad_acpi: Lenovo ThinkPad X60 Tablet, model 6363WDK
    thinkpad_acpi: WARNING: Outdated ThinkPad BIOS/EC firmware
    thinkpad_acpi: WARNING: This firmware may be missing critical bug fixes and/or important features
    thinkpad_acpi: ACPI backlight control delay disabled
    thinkpad_acpi: radio switch found; radios are enabled
    thinkpad_acpi: possible tablet mode switch found; ThinkPad in laptop mode
    thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
    thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
    Registered led device: tpacpi::thinklight
    Registered led device: tpacpi::power
    Registered led device: tpacpi::standby
    Registered led device: tpacpi::thinkvantage
    thinkpad_acpi: Standard ACPI backlight interface available, not loading native one.
    ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
    ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
    ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
    ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
    ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
    ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
    cat /var/log/acpid.log
    Feb 28 13:19:28 damnation acpid: exiting
    Mar 1 12:48:43 damnation acpid: starting up
    Mar 1 12:48:43 damnation acpid: 4 rules loaded
    Mar 1 12:48:43 damnation acpid: waiting for events: event logging is off
    Mar 1 12:48:44 damnation acpid: client connected from 1737[82:82]
    Mar 1 12:48:44 damnation acpid: 1 client rule loaded
    Mar 1 12:49:39 damnation acpid: client connected from 2523[0:0]
    Mar 1 12:49:39 damnation acpid: 1 client rule loaded
    Mar 1 12:49:56 damnation acpid: exiting
    Mar 1 12:49:56 damnation acpid: starting up
    Mar 1 12:49:56 damnation acpid: 4 rules loaded
    Mar 1 12:49:56 damnation acpid: waiting for events: event logging is off
    Mar 1 12:49:57 damnation acpid: client connected from 2523[0:0]
    Mar 1 12:49:57 damnation acpid: 1 client rule loaded
    Mar 1 12:50:01 damnation acpid: client connected from 1737[82:82]
    Mar 1 12:50:01 damnation acpid: 1 client rule loaded
    Mar 2 10:23:50 damnation acpid: client 2523[0:0] has disconnected
    Mar 2 10:23:50 damnation acpid: client connected from 2523[0:0]
    Mar 2 10:23:50 damnation acpid: 1 client rule loaded
    Mar 2 10:52:18 damnation acpid: client 2523[0:0] has disconnected
    Mar 2 10:52:18 damnation acpid: client connected from 2523[0:0]
    Mar 2 10:52:18 damnation acpid: 1 client rule loaded
    Mar 2 17:00:21 damnation acpid: client 2523[0:0] has disconnected
    Mar 2 17:00:21 damnation acpid: client connected from 2523[0:0]
    Mar 2 17:00:21 damnation acpid: 1 client rule loaded
    Mar 3 09:54:32 damnation acpid: client 2523[0:0] has disconnected
    Mar 3 09:54:32 damnation acpid: client connected from 2523[0:0]
    Mar 3 09:54:32 damnation acpid: 1 client rule loaded
    Mar 3 10:28:14 damnation acpid: exiting
    Mar 3 10:28:14 damnation acpid: starting up
    Mar 3 10:28:14 damnation acpid: 4 rules loaded
    Mar 3 10:28:14 damnation acpid: waiting for events: event logging is off
    Mar 3 10:28:15 damnation acpid: client connected from 2523[0:0]
    Mar 3 10:28:15 damnation acpid: 1 client rule loaded
    Mar 3 10:28:19 damnation acpid: client connected from 1737[82:82]
    Mar 3 10:28:19 damnation acpid: 1 client rule loaded
    Mar 3 10:37:44 damnation acpid: exiting
    Mar 3 10:37:44 damnation acpid: starting up
    Mar 3 10:37:44 damnation acpid: 4 rules loaded
    Mar 3 10:37:44 damnation acpid: waiting for events: event logging is off
    Mar 3 10:37:45 damnation acpid: client connected from 2523[0:0]
    Mar 3 10:37:45 damnation acpid: 1 client rule loaded
    Mar 3 10:37:49 damnation acpid: client connected from 1737[82:82]
    Mar 3 10:37:49 damnation acpid: 1 client rule loaded
    Mar 3 12:22:44 damnation acpid: exiting
    Mar 3 12:23:44 damnation acpid: starting up
    Mar 3 12:23:45 damnation acpid: 4 rules loaded
    Mar 3 12:23:45 damnation acpid: waiting for events: event logging is off
    Mar 3 12:23:46 damnation acpid: client connected from 3417[82:82]
    Mar 3 12:23:46 damnation acpid: 1 client rule loaded
    Mar 3 12:24:40 damnation acpid: client connected from 4287[0:0]
    Mar 3 12:24:40 damnation acpid: 1 client rule loaded
    Mar 3 12:24:55 damnation acpid: exiting
    Mar 3 12:24:55 damnation acpid: starting up
    Mar 3 12:24:55 damnation acpid: 4 rules loaded
    Mar 3 12:24:55 damnation acpid: waiting for events: event logging is off
    Mar 3 12:24:56 damnation acpid: client connected from 4287[0:0]
    Mar 3 12:24:56 damnation acpid: 1 client rule loaded
    Mar 3 12:25:00 damnation acpid: client connected from 3417[82:82]
    Mar 3 12:25:00 damnation acpid: 1 client rule loaded
    Mar 3 12:40:54 damnation acpid: exiting
    Mar 3 12:49:47 damnation acpid: starting up
    Mar 3 12:49:47 damnation acpid: 4 rules loaded
    Mar 3 12:49:47 damnation acpid: waiting for events: event logging is off
    Mar 3 12:49:49 damnation acpid: client connected from 3396[82:82]
    Mar 3 12:49:49 damnation acpid: 1 client rule loaded
    Mar 3 12:50:12 damnation acpid: client connected from 5224[0:0]
    Mar 3 12:50:12 damnation acpid: 1 client rule loaded
    Mar 3 12:50:59 damnation acpid: exiting
    Mar 3 12:50:59 damnation acpid: starting up
    Mar 3 12:50:59 damnation acpid: 4 rules loaded
    Mar 3 12:50:59 damnation acpid: waiting for events: event logging is off
    Mar 3 12:51:00 damnation acpid: client connected from 5224[0:0]
    Mar 3 12:51:00 damnation acpid: 1 client rule loaded
    Mar 3 12:51:04 damnation acpid: client connected from 3396[82:82]
    Mar 3 12:51:04 damnation acpid: 1 client rule loaded
    Mar 3 13:21:42 damnation acpid: exiting
    Mar 3 13:21:42 damnation acpid: starting up
    Mar 3 13:21:42 damnation acpid: 4 rules loaded
    Mar 3 13:21:42 damnation acpid: waiting for events: event logging is off
    Mar 3 13:21:43 damnation acpid: client connected from 5224[0:0]
    Mar 3 13:21:43 damnation acpid: 1 client rule loaded
    Mar 3 13:21:47 damnation acpid: client connected from 3396[82:82]
    Mar 3 13:21:47 damnation acpid: 1 client rule loaded
    Mar 3 13:22:21 damnation acpid: exiting
    Mar 3 13:22:21 damnation acpid: starting up
    Mar 3 13:22:21 damnation acpid: 4 rules loaded
    Mar 3 13:22:21 damnation acpid: waiting for events: event logging is off
    Mar 3 13:22:22 damnation acpid: client connected from 5224[0:0]
    Mar 3 13:22:22 damnation acpid: 1 client rule loaded
    Mar 3 13:22:26 damnation acpid: client connected from 3396[82:82]
    Mar 3 13:22:26 damnation acpid: 1 client rule loaded
    Mar 3 13:23:03 damnation acpid: client 5224[0:0] has disconnected
    Mar 3 13:23:03 damnation acpid: client connected from 5224[0:0]
    Mar 3 13:23:03 damnation acpid: 1 client rule loaded
    Mar 3 13:25:00 damnation acpid: exiting
    Mar 3 13:25:00 damnation acpid: starting up
    Mar 3 13:25:00 damnation acpid: 4 rules loaded
    Mar 3 13:25:00 damnation acpid: waiting for events: event logging is off
    Mar 3 13:25:01 damnation acpid: client connected from 5224[0:0]
    Mar 3 13:25:01 damnation acpid: 1 client rule loaded
    Mar 3 13:25:05 damnation acpid: client connected from 3396[82:82]
    Mar 3 13:25:05 damnation acpid: 1 client rule loaded
    Mar 3 13:29:52 damnation acpid: client connected from 21588[1000:100]
    Mar 3 13:29:52 damnation acpid: 1 client rule loaded
    Mar 3 13:30:27 damnation acpid: client 21588[1000:100] has disconnected
    Mar 3 13:36:15 damnation acpid: exiting
    Mar 3 13:37:54 damnation acpid: starting up
    Mar 3 13:37:54 damnation acpid: 4 rules loaded
    Mar 3 13:37:54 damnation acpid: waiting for events: event logging is off
    Mar 3 13:37:56 damnation acpid: client connected from 3419[82:82]
    Mar 3 13:37:56 damnation acpid: 1 client rule loaded
    Mar 3 13:38:28 damnation acpid: client connected from 4292[0:0]
    Mar 3 13:38:28 damnation acpid: 1 client rule loaded
    Mar 3 13:39:24 damnation acpid: exiting
    Mar 3 13:39:24 damnation acpid: starting up
    Mar 3 13:39:24 damnation acpid: 4 rules loaded
    Mar 3 13:39:24 damnation acpid: waiting for events: event logging is off
    Mar 3 13:39:25 damnation acpid: client connected from 4292[0:0]
    Mar 3 13:39:25 damnation acpid: 1 client rule loaded
    Mar 3 13:39:29 damnation acpid: client connected from 3419[82:82]
    Mar 3 13:39:29 damnation acpid: 1 client rule loaded
    Mar 3 13:44:09 damnation acpid: client connected from 4488[1000:100]
    Mar 3 13:44:09 damnation acpid: 1 client rule loaded
    Mar 3 13:45:42 damnation acpid: client 4488[1000:100] has disconnected
    Mar 3 13:58:17 damnation acpid: exiting
    Mar 3 13:58:17 damnation acpid: starting up
    Mar 3 13:58:17 damnation acpid: 4 rules loaded
    Mar 3 13:58:17 damnation acpid: waiting for events: event logging is off
    Mar 3 13:58:18 damnation acpid: client connected from 4292[0:0]
    Mar 3 13:58:18 damnation acpid: 1 client rule loaded
    Mar 3 13:58:22 damnation acpid: client connected from 3419[82:82]
    Mar 3 13:58:22 damnation acpid: 1 client rule loaded
    (are all these "client has disconnected" messages normal?)
    Last edited by Natanji (2010-03-07 11:03:54)

    I don't know if it works for everyone but i have just fixed the acpi rotate for my x60t
    /usr/bin/xrotate
    #!/bin/sh
    output=LVDS1
    if [ "$XROT_OUTPUT" ]
    then
    output=$XROT_OUTPUT;
    fi
    devices="stylus eraser"
    geomnbr=0
    xrandr=normal
    wacom=normal
    if [ "$1" == "-" ] || [ "$1" == "+" ] || ! [ "$1" ];
    then
    operator="$1";
    [ "$1" ] || operator='+';
    case `xrandr --verbose | grep "^$output " | sed "s/^[^ ]* [^ ]* [^ ]* ([^(]*) \([a-z]*\).*/\1/"` in
    normal) geom=0;;
    left) geom=1;;
    inverted) geom=2;;
    right) geom=3;;
    esac
    let geom=${geom}${operator}1+4
    let geom=${geom}%4
    else
    geom="$1"
    fi
    case $geom in
    1) wacom=CCW; xrandr=left ;;
    2) wacom=HALF; xrandr=inverted ;;
    3) wacom=CW; xrandr=right ;;
    *) wacom=NONE; xrandr=normal ;;
    esac
    echo "xrandr to $xrandr, xsetwacom to $wacom" >&2
    if xrandr --output "$output" --rotate "$xrandr"; then
    for device in $devices
    do
    xsetwacom set "$device" Rotate "$wacom"
    done
    fi
    #workaround for linuxwacom bug
    if [ "`xsetwacom get stylus Mode`" == '1' ]; then
    for decive in $devices
    do
    xsetwacom set stylus CoreEvent "off"
    xsetwacom set stylus Mode "off"
    done
    { sleep 1;
    for device in $devices
    do
    xsetwacom set stylus Mode "on"
    xsetwacom set stylus CoreEvent "on"
    done; } &
    fi
    /etc/acpi/thinkpad-swivel-up.sh       
    #!/bin/bash
    XAUTHORITY=/var/lib/gdm/\:0.Xauth DISPLAY=:0.0 /usr/bin/xrotate 0
    /etc/acpi/thinkpad-swivel-down.sh       
    #!/bin/bash
    XAUTHORITY=/var/lib/gdm/\:0.Xauth DISPLAY=:0.0 /usr/bin/xrotate 1
    The problem was that my acpid starts long before xorg.
    System:
    Thinkpad x60 tablet
    xorg 1.8
    acpid 1.0.10

  • Intel Graphics no longer works after upgrade to Windows 8.1

    Upgraded to Windows 8.1. The Intel HD 4000 Graphics Driver no longer loads. Device manager reports an error (43). Can only use Generic Non PnP Monitor. Any word on when this will be fixed?
    Driver version: 10.18.10.3316
    Thinkpad W530

    Hi,
    Welcome to Lenovo Community Forums!
    I’m sorry to hear that Intel graphics driver is not working in your Lenovo ThinkPad W530 after updating to Windows 8.1.
    Try updating your chipset drivers and ensure that you have enabled onboard graphics in BIOS. Try to install Windows 8 driver and check if it helps.
    This issue has been discussed at Intel community forums and they are working with Microsoft to get this issue fixed. Hope they will resolve the issue on priority and come up with an update. As of now, the only work around is to roll back the system to Windows 8 and wait for an update or patch.
    Best regards,
    Mithun.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Aiport Expresses No Longer Working - Airport Utility for Windows 5.6.1

    I have two airport express devices, each connected to a stereo to stream itunes.  Both have abruptly stopped working and the Airport Utility no longer recognizes either device. Neither device is available in itunes as a "speaker" anymore.  When I run the airport utility scan, I receive the following message:
    "Airport utility was unable to find any airport devices......."  The devices are in range (always have been and have always worked up until now).
    What I have tried so far:
    Uninstall and reinstall Airport Utility
    Reset the airport express devices
    Same results as before, Airport utility is unable to find either device.
    Thanks

    This link?
    AirPort Utility 5.6.1 for Windows - Apple Support

  • Thinkpad Edge S430 - Windows does not detect external display connected via HDMI

    On a Thinkpad S430 with HD4000 integrated graphics, an external display connected via a HDMI cable is not detected at all when using Windows. The system is fully updated as of the time of posting this message, both via the Lenovo Update tool as well as Windows update.
    The Intel driver version is 8.15.10.2696. It appears that this is the latest version, since it does not offer an update when I try to auto-update it via Device Manager.
    NB: I am running Ubuntu 12.04 with kernel 3.4.0 on the same machine, and the external display works perfectly fine with this software configuration.
    Hence I think that it's very likely that this is a Windows-specific driver issue.
    Would Lenovo happen to have a driver update in the works? Alternatively, I will be thankful for any suggestions about possible resolution of this problem.

    skn2011 wrote:
    My Macbook Pro notbook 13.3" does not detect external display throught it's mini display port to HDMI connector when connected to Sony Bravia 32" LCD TV.Can anyone help me get the answer as i tried reading everywhere on internet and none does not seems to work.Please help me out guys.
    Are you using the Apple adaptor or a 3rd party

  • Apple wireless keyboard no longer working with boot camp Windows 7

    Hi,
    I've had Boot Camp installed for about half a year now with no problems.
    Yesterday my wireless keyboard stopped working with it, it also appears that bluetooth isn't in the device manager or in the control panel,  it could no linger detect either my magic mouse or keyboard despite having fresh new batteries. They do however still work with my Mac OSX partition. It also lets me hold down alt to choose which OS to boot into on startup however when it gets to the log in screen for windows the keyboard stopped working.
    I've tried unpairing them in OSX then trying it in Windows but like I said bluethooth doesnt even appear to be there and it wont detect them. I've also tried reinstalling the apple drivers twice, still doesn't work.
    If it helps I have a early 2011 iMac 21.5inch and it's Windows 7 Ultimate 64 bit.
    Thanks,
    Dan

    This may be just a Boot Camp issue, if no one here can help you may also want to post in the Boot Camp forum.

  • Bookmarks no longer working in pl/sql window ( still works in worksheet window )

    In the pl/sql window I have line number enabled and in the past I could right clink in the number column and toggle either break point or bookmark. In 4.0 I get the option and works fine for setting the bookmark in the worksheet but in the pl/sql window I only get the option to set break point.

    Hi,
    We are aware of this issue and a bug has been logged on this. Thanks for your feedback.
    Ashley
    SQL Developer Team

  • My plug or driver no longer works on my PC windows

    out of nowhere, when i plug my phone into my PC (windows vista 64 bit) the driver cannot be found.
    how can i locate it?

    Remove and reinstall iTunes 64 bit using these instructions: http://support.apple.com/kb/HT1923
    Do not skip any steps.

  • Thinkpad Edge 450 - Window 8.1 Pro - Clean installation

    Hey guys,
    i just bought that laptop on last week.
    The installed window version when i bought is window 7 with free upgrade right to window 8 pro.
    i've already ordered some of recovery media from lenovo but installation stuck in setting Up window 8.
    So, I decided to install window 8.1 via USB. I just want to know is
    - if I install window 8.1, window will be automatically activated or not when connected to internet.
    - I saw two particular partitions in harddisk that there are "System Drv" and "Recover Partation" and they will be deleted when i install window 8.1.
    - Either way is go to service center and make them do it?
    Thank you very much!!

    I would download the latests bootcamp driver zip
    Apple - Support - Downloads
    if it's 5033 or 5621 depend on your model which ones for which are listed
    unzip in windows and navigate to the wifi or ethernet driver and manually install the drivers

Maybe you are looking for