Hotkeys Stop Working (?)

When using Framemaker v7.1 all hotkeys stop working randomly during use. This includes things such as ctrl-c, ctrl-v, ctrl-b, etc. The hotkeys continue to work in any other program outside of Framemaker.
I've been trying to troubleshoot this for about 2 months now with no luck.
The only fix I've discovered is closing down the entire program and reopening it.
Anyone have any experience with this issue or any suggestions?
Thanks!

Craig:
This is a FrameMaker behavior I've observed for several years.
For me, the causative event is usually that of double-clicking on an imported-by-reference graphic so as to open it in a separate graphics-editing program. After doing so, CTRL keys stop working in FrameMaker.
The circumventions I've discovered to this problem, in order of disruption to my workflow are:
* Exit then restart FrameMaker (seldom works)
* Log off Windows then log back in (almost always works)
* Reboot (always works but seldom necessary)
The mental construct I've developed to explain FrameMaker's behavior in this regard is that the program was originally created for a much earlier generation of Windows, and so represents one of several of FrameMaker's age-related "crotchets"...
Cheers & hope this helps,
Riley

Similar Messages

  • W530 Hotkeys stop working with Firefox

    Hey Guys,
    I just received my w530 about a week ago and the laptop was pretty fast and everything was working well until I watched a youtube video on Firefox.  When I pressed play/pause on the interface my volume hotkeys on my keyboard wouldn't work.  It would start working again if I clicked on the volume icon.  So I figured I probably just needed an update.  I update the machine and I get even more errors with my machine saying something about some files lost and it was being fixed. 
    I fully update everything including the BIOS and I'm still gettng the same Firefox problem.  I don't really want to reformat or feel like I should have to reformat a new machine.  I do know that the problem is within FIrefox because I tested it on Chrome and IE and didn't get the same problems....Help anyone?

    Did Youtube decide to switch to HTML5 for you? That might be why.
    W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
    X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
    Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

  • T520 hotkeys stopped working on Win 8

    I upated some apps like: PM, Bluetooth drivers and some more which had updates in 2013 (since I last upated in 2012) and hotkeys doesn't work. For example Fn+F5 just turns off wifi through windows 8. Fn+F8 doesn't work either.
    Please help.

    Hi, fischerb
    Have you tried installing the latest version of the Hotkey Features Integration? If not, it can be found here.
    Best of luck, and let me know how it goes
    Adam
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

  • W520 Hotkey stopped working for no apparent reason.

    Hello Lenovo Community,
    I have been attempting to fix my hot keys. I have read several solutions and have attempted it. I have unistalled the hotkeys drivers and reinstalled it and updated my drivers. Still I have no luck. Hopefully someone can help me out.
    Thank You

    Did you try uninstalling and reinstalling the Power Management driver?
    Are you on Windows 7?
    W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
    X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
    Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

  • Zoom-In hotkey has stopped working

    I was working in Illustrator last night when the zoom-in hotkey (cmd +) stopped working for me. All other hotkeys in my usual workflow have been working, including the zoom-out (cmd -) hotkey, strangely enough.
    So far I have tried:
    -Restarting Illustrator
    -Deleting Illustrator Prefs file
    -Killing all background applications
    Nothing has worked. I'm still without a zoom in hotkey. I've tested the cmd key and the + key in and out of Illustrator, and both work fine, just not in conjunction. I've also checked in Photoshop and the zoom in hotkey works find there.
    I'm using:
    Illustrator CS4 (trial)
    OSX 10.4.11
    Photoshop CS2
    if somebody has a clue, i'd be more than happy to listen. this is killing my workflow. Not being able to zoom in through keys is like working with one hand tied behind my back.

    Try removing the entire Adobe Illustrator CS4 Settings folder, not just the Adobe Illustrator Prefs file inside.

  • Cs6 hotkeys randomly stop working

    Why do the hotkeys randomly stop working???
    Simple ones, like the move tool or the marquee tool.
    The only fix i've found is having to CLICK on the tool and then the hotkeys will work again...it's really annoying - never happened in cs5...

    There's really nothing in cs6 that makes it worthwhile to switch - and certainily not worth paying an arm and a leg for the "cloud"...biggest scam ever to make more cash.
    Well, I certainly share a dislike of the Cloud License.
    But »Liquify as a Smart Filter« seems tempting to me.
    And while in my opinion »Blur Gallery as a Smart Filter« should have been the way to introduce it, it finally being that way in 13.1 also seems interesting.
    Also, I use cs5 daily, and have used photoshop since version "7"...
    That does not seem likely to impress many people here. (edited)
    my boss keeps asking me if we should upgrade the company from cs5.5...
    It is certainly up to you to assess which of the new features are worthwhile to you (and your colleagues).
    But what you call »retarded issues« may be actual bugs or user errors or the consequence of lacking system-maintainenace or hardware related or …
    There is no way to tell without more information.
    Edit: Please not that I am not an Adobe employee.

  • Headphone output stopped working (snd-hda, Dell XPS 13)

    Update: I got it working! See my second post; I will leave this here as a reference for those with the same problem.
    My headphone output stopped working, and my integrated microphone also stopped working. The speakers work fine, though.
    AFAIK, I didn't do anything, and am quite baffled as to why this is. It's worked fine for half a year.
    I have a Dell XPS 13; it came installed with Ubuntu, I booted that, where it *does* work (just to eliminate hardware problems).
    I'm running 3.16.4-1; I also downgraded to 3.16.3, which didn't help.
    I'm testing with speaker-test and mplayer -ao alsa; I normally use PulseAudio, but eliminating that for testing seemed like a sane thing to do. It doesn't work either way.
    I also downloaded the hda_analyzer, that has a lot of options, but I'm not sure what most of them mean...
    The closest I've been able to get at the problem is this:
    [~]% alsactl monitor
    card 0, #17 (0,0,0,Headphone Mic Jack,0) VALUE
    card 0, #17 (0,0,0,Headphone Mic Jack,0) VALUE
    This is an insert & remove of my headphone jack; ALSA does detect something it seems. It's listed as "Headphone Mic Jack", is this right?
    Any hints would be greatly appreciated!
    More info:
    [~]% cat /etc/modprobe.d/alsa-base.conf
    options snd-hda-intel enable=0,1
    options snd-hda-intel model=dell-headset-multi,dell-headset-multi
    This is required to get this to work in the first place, and always has worked; I tried some other options, to no avail. the enable=0,1 is to disable the HDMI output (disabling this has no effect either).
    $ cat /sys/module/snd_hda_intel/parameters/model
    dell-headset-multi,dell-headset-multi,(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null), +(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
    To verify these options are actually being used
    $ id -Gn
    martin wheel video audio vboxusers nfs
    I'm in the audio group, not sure if this is required, but can't hurt.
    [~]# cat /etc/asound.conf
    # Use PulseAudio by default
    pcm.!default {
    type pulse
    fallback "sysdefault"
    hint {
    show on
    description "Default ALSA Output (currently PulseAudio Sound Server)"
    ctl.!default {
    type pulse
    fallback "sysdefault"
    # vim:set ft=alsaconf:
    Nothing special ... pulseaudio is more or less mandatory these days. ~/.asoundrc doesn't exist.
    Some misc. info:
    $ grep Codec /proc/asound/card*/codec*
    Codec: Realtek ALC3661
    [~]% lsmod | grep ^snd
    snd_usb_audio 135316 0
    snd_usbmidi_lib 27484 1 snd_usb_audio
    snd_rawmidi 26806 1 snd_usbmidi_lib
    snd_seq_device 13132 1 snd_rawmidi
    snd_hda_codec_realtek 67127 1
    snd_hda_codec_generic 63126 1 snd_hda_codec_realtek
    snd_hda_intel 26327 3
    snd_hda_controller 26727 1 snd_hda_intel
    snd_hda_codec 108552 4 snd_hda_codec_realtek,snd_hda_codec_generic,snd_hda_intel,snd_hda_controller
    snd_hwdep 17244 2 snd_usb_audio,snd_hda_codec
    snd_pcm 88487 4 snd_usb_audio,snd_hda_codec,snd_hda_intel,snd_hda_controller
    snd_timer 26614 1 snd_pcm
    snd 73436 17 snd_hda_codec_realtek,snd_usb_audio,snd_hwdep,snd_timer,snd_pcm,snd_rawmidi,snd_hda_codec_generic,snd_usbmidi_lib,snd_hda_codec,snd_hda_intel,snd_seq_device
    $ lspci -vv
    00:03.0 Audio device: Intel Corporation Haswell-ULT HD Audio Controller (rev 09)
    Subsystem: Dell Device 060a
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 11
    Region 0: Memory at f0510000 (64-bit, non-prefetchable) [size=16K]
    Capabilities: <access denied>
    Kernel modules: snd_hda_intel
    00:1b.0 Audio device: Intel Corporation 8 Series HD Audio Controller (rev 04)
    Subsystem: Dell Device 060a
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 59
    Region 0: Memory at f0514000 (64-bit, non-prefetchable) [size=16K]
    Capabilities: <access denied>
    Kernel driver in use: snd_hda_intel
    Kernel modules: snd_hda_intel
    $ dmesg
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.16.4-1-ARCH (nobody@var-lib-archbuild-testing-x86_64-tobias) (gcc version 4.9.1 20140903 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Oct 6 08:22:27 CEST 2014
    [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=7259ebb8-c940-4659-a99c-66226a58659c rw quiet
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c2879fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000c287a000-0x00000000dceeefff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000dceef000-0x00000000dcf9efff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000dcf9f000-0x00000000dcffefff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x00000000dcfff000-0x00000000df9fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fe101000-0x00000000fe112fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ff980000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021f5fffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.7 present.
    [ 0.000000] DMI: Dell Inc. XPS13 9333/0GFTRT, BIOS A02 12/11/2013
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] AGP: No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x21f600 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: write-back
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 00E0000000 mask 7FE0000000 uncachable
    [ 0.000000] 1 base 00DE000000 mask 7FFE000000 uncachable
    [ 0.000000] 2 base 00DD000000 mask 7FFF000000 uncachable
    [ 0.000000] 3 disabled
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] 8 disabled
    [ 0.000000] 9 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: last_pfn = 0xc287a max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [mem 0x000f0100-0x000f010f] mapped at [ffff8800000f0100]
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
    [ 0.000000] Using GB pages for direct mapping
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b23000, 0x01b23fff] PGTABLE
    [ 0.000000] BRK [0x01b24000, 0x01b24fff] PGTABLE
    [ 0.000000] BRK [0x01b25000, 0x01b25fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x21f400000-0x21f5fffff]
    [ 0.000000] [mem 0x21f400000-0x21f5fffff] page 2M
    [ 0.000000] BRK [0x01b26000, 0x01b26fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x21c000000-0x21f3fffff]
    [ 0.000000] [mem 0x21c000000-0x21f3fffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x200000000-0x21bffffff]
    [ 0.000000] [mem 0x200000000-0x21bffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0xc2879fff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
    [ 0.000000] [mem 0x40000000-0xbfffffff] page 1G
    [ 0.000000] [mem 0xc0000000-0xc27fffff] page 2M
    [ 0.000000] [mem 0xc2800000-0xc2879fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
    [ 0.000000] [mem 0x100000000-0x1ffffffff] page 1G
    [ 0.000000] RAMDISK: [mem 0x3796a000-0x37cacfff]
    [ 0.000000] ACPI: Early table checksum verification disabled
    [ 0.000000] ACPI: RSDP 0x00000000000F0120 000024 (v02 DELL )
    [ 0.000000] ACPI: XSDT 0x00000000DCFFE170 0000BC (v01 DELL QA09 00000002 LOHR 00000002)
    [ 0.000000] ACPI: FACP 0x00000000DCFFB000 00010C (v05 DELL QA09 00000002 LOHR 00000002)
    [ 0.000000] ACPI: DSDT 0x00000000DCFE6000 010557 (v02 DELL HSW-LPT 00000000 INTL 20120711)
    [ 0.000000] ACPI: FACS 0x00000000DCF9C000 000040
    [ 0.000000] ACPI: ASF! 0x00000000DCFFD000 0000A5 (v32 DELL QA09 00000002 LOHR 00000002)
    [ 0.000000] ACPI: HPET 0x00000000DCFFA000 000038 (v01 DELL QA09 00000002 LOHR 00000002)
    [ 0.000000] ACPI: LPIT 0x00000000DCFF9000 000094 (v01 DELL QA09 00000002 LOHR 00000002)
    [ 0.000000] ACPI: APIC 0x00000000DCFF8000 000098 (v01 DELL QA09 00000002 LOHR 00000002)
    [ 0.000000] ACPI: MCFG 0x00000000DCFF7000 00003C (v01 DELL QA09 00000002 LOHR 00000002)
    [ 0.000000] ACPI: SSDT 0x00000000DCFE5000 000228 (v01 DELL sensrhub 00000000 INTL 20120711)
    [ 0.000000] ACPI: SSDT 0x00000000DCFE2000 002028 (v01 DELL PtidDevc 00001000 INTL 20120711)
    [ 0.000000] ACPI: SSDT 0x00000000DCFE1000 000539 (v01 DELL Cpu0Ist 00003000 INTL 20120711)
    [ 0.000000] ACPI: SSDT 0x00000000DCFE0000 000AD8 (v01 DELL CpuPm 00003000 INTL 20120711)
    [ 0.000000] ACPI: SSDT 0x00000000DCFDC000 003641 (v01 DELL SaSsdt 00003000 INTL 20120711)
    [ 0.000000] ACPI: UEFI 0x00000000DCFDB000 000042 (v01 DELL QA09 00000002 LOHR 00000002)
    [ 0.000000] ACPI: POAT 0x00000000DCF77000 000055 (v03 DELL QA09 00000002 LOHR 00000002)
    [ 0.000000] ACPI: BATB 0x00000000DCFDA000 000046 (v01 DELL QA09 00000002 LOHR 00000002)
    [ 0.000000] ACPI: FPDT 0x00000000DCFD9000 000064 (v01 DELL QA09 00000002 LOHR 00000002)
    [ 0.000000] ACPI: SLIC 0x00000000DCFD8000 000176 (v01 DELL QA09 00000002 LOHR 00000002)
    [ 0.000000] ACPI: UEFI 0x00000000DCFD7000 0002A6 (v01 DELL QA09 00000002 LOHR 00000002)
    [ 0.000000] ACPI: SSDT 0x00000000DCFD6000 0005C1 (v01 DELL IsctTabl 00001000 INTL 20120711)
    [ 0.000000] ACPI: CSRT 0x00000000DCFD4000 0000C4 (v01 DELL QA09 00000002 LOHR 00000002)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021f5fffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x21f5fffff]
    [ 0.000000] NODE_DATA [mem 0x21f5f9000-0x21f5fdfff]
    [ 0.000000] [ffffea0000000000-ffffea00087fffff] PMD -> [ffff880217200000-ffff88021ebfffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x21f5fffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
    [ 0.000000] node 0: [mem 0x00100000-0xc2879fff]
    [ 0.000000] node 0: [mem 0x100000000-0x21f5fffff]
    [ 0.000000] On node 0 totalpages: 1973782
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 21 pages reserved
    [ 0.000000] DMA zone: 3996 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 12386 pages used for memmap
    [ 0.000000] DMA32 zone: 792698 pages, LIFO batch:31
    [ 0.000000] Normal zone: 18392 pages used for memmap
    [ 0.000000] Normal zone: 1177088 pages, LIFO batch:31
    [ 0.000000] Reserving Intel graphics stolen memory at 0xdda00000-0xdf9fffff
    [ 0.000000] ACPI: PM-Timer IO Port: 0x1808
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 56
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xc287a000-0xdceeefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xdceef000-0xdcf9efff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xdcf9f000-0xdcffefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xdcfff000-0xdf9fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfe100fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfe101000-0xfe112fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfe113000-0xfebfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff97ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xff980000-0xffffffff]
    [ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88021f200000 s86784 r8192 d23808 u262144
    [ 0.000000] pcpu-alloc: s86784 r8192 d23808 u262144 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1942919
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=7259ebb8-c940-4659-a99c-66226a58659c rw quiet
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
    [ 0.000000] AGP: Checking aperture...
    [ 0.000000] AGP: No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 7688084K/7895128K available (5336K kernel code, 887K rwdata, 1688K rodata, 1128K init, 1164K bss, 207044K reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
    [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
    [ 0.000000] NR_IRQS:8448 nr_irqs:1016 16
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 31981568 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.000000] tsc: Detected 2394.295 MHz processor
    [ 0.000039] Calibrating delay loop (skipped), value calculated using timer frequency.. 4790.11 BogoMIPS (lpj=7980983)
    [ 0.000042] pid_max: default: 32768 minimum: 301
    [ 0.000050] ACPI: Core revision 20140424
    [ 0.020000] ACPI: All ACPI Tables successfully acquired
    [ 0.020260] Security Framework initialized
    [ 0.020267] Yama: becoming mindful.
    [ 0.020937] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.022978] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.023836] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
    [ 0.023849] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
    [ 0.024116] Initializing cgroup subsys memory
    [ 0.024140] Initializing cgroup subsys devices
    [ 0.024147] Initializing cgroup subsys freezer
    [ 0.024150] Initializing cgroup subsys net_cls
    [ 0.024155] Initializing cgroup subsys blkio
    [ 0.024183] CPU: Physical Processor ID: 0
    [ 0.024184] CPU: Processor Core ID: 0
    [ 0.024189] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [ 0.025376] mce: CPU supports 7 MCE banks
    [ 0.025391] CPU0: Thermal monitoring enabled (TM1)
    [ 0.025404] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
    Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
    tlb_flushall_shift: 6
    [ 0.025524] Freeing SMP alternatives memory: 20K (ffffffff819f9000 - ffffffff819fe000)
    [ 0.026475] ftrace: allocating 20445 entries in 80 pages
    [ 0.038058] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.071090] smpboot: CPU0: Intel(R) Core(TM) i7-4500U CPU @ 1.80GHz (fam: 06, model: 45, stepping: 01)
    [ 0.071098] TSC deadline timer enabled
    [ 0.071124] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
    [ 0.071149] ... version: 3
    [ 0.071150] ... bit width: 48
    [ 0.071151] ... generic registers: 4
    [ 0.071152] ... value mask: 0000ffffffffffff
    [ 0.071154] ... max period: 0000ffffffffffff
    [ 0.071155] ... fixed-purpose events: 3
    [ 0.071156] ... event mask: 000000070000000f
    [ 0.097907] x86: Booting SMP configuration:
    [ 0.097909] .... node #0, CPUs: #1
    [ 0.112630] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.119293] #2 #3
    [ 0.154938] x86: Booted up 1 node, 4 CPUs
    [ 0.154942] smpboot: Total of 4 processors activated (19162.45 BogoMIPS)
    [ 0.160676] devtmpfs: initialized
    [ 0.163608] PM: Registering ACPI NVS region [mem 0xdceef000-0xdcf9efff] (720896 bytes)
    [ 0.164642] pinctrl core: initialized pinctrl subsystem
    [ 0.164688] RTC time: 22:42:27, date: 10/21/14
    [ 0.164750] NET: Registered protocol family 16
    [ 0.164884] cpuidle: using governor ladder
    [ 0.164887] cpuidle: using governor menu
    [ 0.164916] ACPI: bus type PCI registered
    [ 0.164918] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.165012] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
    [ 0.165014] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
    [ 0.165118] PCI: Using configuration type 1 for base access
    [ 0.165125] dmi type 0xB1 record - unknown flag
    [ 0.177572] ACPI: Added _OSI(Module Device)
    [ 0.177575] ACPI: Added _OSI(Processor Device)
    [ 0.177577] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.177578] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.183007] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.194850] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.207326] ACPI: Dynamic OEM Table Load:
    [ 0.207339] ACPI: SSDT 0xFFFF880213EE7000 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
    [ 0.220827] ACPI: Dynamic OEM Table Load:
    [ 0.220838] ACPI: SSDT 0xFFFF880213F81000 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
    [ 0.237345] ACPI: Dynamic OEM Table Load:
    [ 0.237354] ACPI: SSDT 0xFFFF880213F56200 000119 (v01 PmRef ApCst 00003000 INTL 20120711)
    [ 0.255255] ACPI: Interpreter enabled
    [ 0.255267] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
    [ 0.255275] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
    [ 0.255298] ACPI: (supports S0 S3 S4 S5)
    [ 0.255300] ACPI: Using IOAPIC for interrupt routing
    [ 0.255336] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.268419] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
    [ 0.268426] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    [ 0.268573] \_SB_.PCI0:_OSC invalid UUID
    [ 0.268575] _OSC request data:1 1f 0
    [ 0.268579] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
    [ 0.269580] PCI host bridge to bus 0000:00
    [ 0.269584] pci_bus 0000:00: root bus resource [bus 00-3e]
    [ 0.269586] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.269588] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.269590] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.269592] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff]
    [ 0.269601] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
    [ 0.269803] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
    [ 0.269817] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit]
    [ 0.269826] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.269831] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
    [ 0.270019] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
    [ 0.270029] pci 0000:00:03.0: reg 0x10: [mem 0xf0510000-0xf0513fff 64bit]
    [ 0.270244] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
    [ 0.270263] pci 0000:00:14.0: reg 0x10: [mem 0xf0500000-0xf050ffff 64bit]
    [ 0.270324] pci 0000:00:14.0: PME# supported from D3hot D3cold
    [ 0.270459] pci 0000:00:14.0: System wakeup disabled by ACPI
    [ 0.270505] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
    [ 0.270526] pci 0000:00:16.0: reg 0x10: [mem 0xf0519000-0xf051901f 64bit]
    [ 0.270598] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 0.270790] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
    [ 0.270806] pci 0000:00:1b.0: reg 0x10: [mem 0xf0514000-0xf0517fff 64bit]
    [ 0.270876] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.271011] pci 0000:00:1b.0: System wakeup disabled by ACPI
    [ 0.271060] pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400
    [ 0.271140] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.271279] pci 0000:00:1c.0: System wakeup disabled by ACPI
    [ 0.271327] pci 0000:00:1c.2: [8086:9c14] type 01 class 0x060400
    [ 0.271410] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    [ 0.271549] pci 0000:00:1c.2: System wakeup disabled by ACPI
    [ 0.271602] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
    [ 0.271624] pci 0000:00:1d.0: reg 0x10: [mem 0xf051d000-0xf051d3ff]
    [ 0.271716] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 0.271867] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 0.271914] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
    [ 0.272193] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
    [ 0.272209] pci 0000:00:1f.2: reg 0x10: [io 0x3088-0x308f]
    [ 0.272217] pci 0000:00:1f.2: reg 0x14: [io 0x3094-0x3097]
    [ 0.272225] pci 0000:00:1f.2: reg 0x18: [io 0x3080-0x3087]
    [ 0.272232] pci 0000:00:1f.2: reg 0x1c: [io 0x3090-0x3093]
    [ 0.272240] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
    [ 0.272247] pci 0000:00:1f.2: reg 0x24: [mem 0xf051c000-0xf051c7ff]
    [ 0.272285] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.272451] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
    [ 0.272466] pci 0000:00:1f.3: reg 0x10: [mem 0xf0518000-0xf05180ff 64bit]
    [ 0.272486] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
    [ 0.272737] pci 0000:00:1c.0: PCI bridge to [bus 01]
    [ 0.272853] pci 0000:02:00.0: [8086:08b1] type 00 class 0x028000
    [ 0.272899] pci 0000:02:00.0: reg 0x10: [mem 0xf0400000-0xf0401fff 64bit]
    [ 0.273097] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
    [ 0.273145] pci 0000:02:00.0: System wakeup disabled by ACPI
    [ 0.277341] pci 0000:00:1c.2: PCI bridge to [bus 02]
    [ 0.277347] pci 0000:00:1c.2: bridge window [mem 0xf0400000-0xf04fffff]
    [ 0.294607] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
    [ 0.294666] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.294723] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *7
    [ 0.294778] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
    [ 0.294832] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.294886] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.294940] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
    [ 0.294995] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
    [ 0.295346] ACPI: Enabled 5 GPEs in block 00 to 7F
    [ 0.295416] ACPI : EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
    [ 0.295555] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.295559] vgaarb: loaded
    [ 0.295560] vgaarb: bridge control possible 0000:00:02.0
    [ 0.295603] PCI: Using ACPI for IRQ routing
    [ 0.297024] PCI: pci_cache_line_size set to 64 bytes
    [ 0.297085] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
    [ 0.297087] e820: reserve RAM buffer [mem 0xc287a000-0xc3ffffff]
    [ 0.297088] e820: reserve RAM buffer [mem 0x21f600000-0x21fffffff]
    [ 0.297209] NetLabel: Initializing
    [ 0.297211] NetLabel: domain hash size = 128
    [ 0.297212] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.297225] NetLabel: unlabeled traffic allowed by default
    [ 0.297250] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 0.297256] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 0.299294] Switched to clocksource hpet
    [ 0.305097] pnp: PnP ACPI init
    [ 0.305113] ACPI: bus type PNP registered
    [ 0.305253] system 00:00: [io 0x0680-0x069f] has been reserved
    [ 0.305256] system 00:00: [io 0xffff] has been reserved
    [ 0.305259] system 00:00: [io 0xffff] has been reserved
    [ 0.305262] system 00:00: [io 0xffff] has been reserved
    [ 0.305265] system 00:00: [io 0x1800-0x18fe] could not be reserved
    [ 0.305267] system 00:00: [io 0x164e-0x164f] has been reserved
    [ 0.305270] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.305325] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.305378] system 00:02: [io 0x1854-0x1857] has been reserved
    [ 0.305381] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
    [ 0.305426] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 0.305459] pnp 00:04: Plug and Play ACPI device, IDs SYN0608 PNP0f03 (active)
    [ 0.305612] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.305614] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
    [ 0.305617] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 0.305619] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 0.305621] system 00:05: [mem 0xf8000000-0xfbffffff] has been reserved
    [ 0.305623] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.305625] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
    [ 0.305627] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
    [ 0.305630] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
    [ 0.305632] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
    [ 0.305634] system 00:05: [mem 0xdfa10000-0xdfa1ffff] has been reserved
    [ 0.305637] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.305958] system 00:06: [mem 0xfe102000-0xfe102fff] has been reserved
    [ 0.305961] system 00:06: [mem 0xfe104000-0xfe104fff] has been reserved
    [ 0.305971] system 00:06: [mem 0xfe106000-0xfe106fff] has been reserved
    [ 0.305974] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.306696] pnp: PnP ACPI: found 7 devices
    [ 0.306698] ACPI: bus type PNP unregistered
    [ 0.313588] pci 0000:00:1c.0: PCI bridge to [bus 01]
    [ 0.313602] pci 0000:00:1c.2: PCI bridge to [bus 02]
    [ 0.313608] pci 0000:00:1c.2: bridge window [mem 0xf0400000-0xf04fffff]
    [ 0.313617] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.313620] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.313622] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.313624] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfeafffff]
    [ 0.313626] pci_bus 0000:02: resource 1 [mem 0xf0400000-0xf04fffff]
    [ 0.313661] NET: Registered protocol family 2
    [ 0.313895] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
    [ 0.314065] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.314196] TCP: Hash tables configured (established 65536 bind 65536)
    [ 0.314216] TCP: reno registered
    [ 0.314229] UDP hash table entries: 4096 (order: 5, 131072 bytes)
    [ 0.314260] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
    [ 0.314329] NET: Registered protocol family 1
    [ 0.314345] pci 0000:00:02.0: Boot video device
    [ 0.314427] pci 0000:00:14.0: can't derive routing for PCI INT A
    [ 0.314429] pci 0000:00:14.0: PCI INT A: no GSI
    [ 0.314520] pci 0000:00:14.0: can't derive routing for PCI INT A
    [ 0.314702] PCI: CLS 64 bytes, default 64
    [ 0.314746] Unpacking initramfs...
    [ 0.389760] Freeing initrd memory: 3340K (ffff88003796a000 - ffff880037cad000)
    [ 0.389768] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 0.389771] software IO TLB [mem 0xbe87a000-0xc287a000] (64MB) mapped at [ffff8800be87a000-ffff8800c2879fff]
    [ 0.389991] RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
    [ 0.390043] Scanning for low memory corruption every 60 seconds
    [ 0.390383] futex hash table entries: 2048 (order: 5, 131072 bytes)
    [ 0.390776] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.392315] zbud: loaded
    [ 0.392526] VFS: Disk quotas dquot_6.5.2
    [ 0.392564] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.392709] msgmni has been set to 15022
    [ 0.392776] Key type big_key registered
    [ 0.392952] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.393009] io scheduler noop registered
    [ 0.393014] io scheduler deadline registered
    [ 0.393072] io scheduler cfq registered (default)
    [ 0.393422] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 0.393440] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 0.393482] intel_idle: MWAIT substates: 0x11142120
    [ 0.393484] intel_idle: v0.4 model 0x45
    [ 0.393485] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 0.393772] GHES: HEST is not enabled!
    [ 0.393860] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.394367] Linux agpgart interface v0.103
    [ 0.394421] rtc_cmos 00:01: RTC can wake from S4
    [ 0.394566] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
    [ 0.394596] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    [ 0.394611] Intel P-state driver initializing.
    [ 0.394625] Intel pstate controlling: cpu 0
    [ 0.394647] Intel pstate controlling: cpu 1
    [ 0.394663] Intel pstate controlling: cpu 2
    [ 0.394684] Intel pstate controlling: cpu 3
    [ 0.394756] ledtrig-cpu: registered to indicate activity on CPUs
    [ 0.395139] TCP: cubic registered
    [ 0.395367] NET: Registered protocol family 10
    [ 0.395811] NET: Registered protocol family 17
    [ 0.396487] registered taskstats version 1
    [ 0.397305] Magic number: 2:622:755
    [ 0.397469] rtc_cmos 00:01: setting system clock to 2014-10-21 22:42:27 UTC (1413931347)
    [ 0.397659] PM: Hibernation image not present or could not be loaded.
    [ 0.399550] Freeing unused kernel memory: 1128K (ffffffff818df000 - ffffffff819f9000)
    [ 0.399554] Write protecting the kernel read-only data: 8192k
    [ 0.403618] Freeing unused kernel memory: 796K (ffff880001539000 - ffff880001600000)
    [ 0.404603] Freeing unused kernel memory: 360K (ffff8800017a6000 - ffff880001800000)
    [ 0.411279] random: systemd-tmpfile urandom read with 4 bits of entropy available
    [ 0.412549] systemd-udevd[57]: starting version 216
    [ 0.429661] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
    [ 0.430313] sdhci: Secure Digital Host Controller Interface driver
    [ 0.430315] sdhci: Copyright(c) Pierre Ossman
    [ 0.435942] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.436007] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 0.441502] ACPI: bus type USB registered
    [ 0.441544] usbcore: registered new interface driver usbfs
    [ 0.441562] usbcore: registered new interface driver hub
    [ 0.441712] usbcore: registered new device driver usb
    [ 0.442370] SCSI subsystem initialized
    [ 0.442606] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 0.442897] ehci-pci: EHCI PCI platform driver
    [ 0.443091] ehci-pci 0000:00:1d.0: EHCI Host Controller
    [ 0.443106] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
    [ 0.443121] ehci-pci 0000:00:1d.0: debug port 2
    [ 0.444256] libata version 3.00 loaded.
    [ 0.447021] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
    [ 0.447046] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf051d000
    [ 0.456197] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 0.456468] hub 1-0:1.0: USB hub found
    [ 0.456636] hub 1-0:1.0: 2 ports detected
    [ 0.456998] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
    [ 0.457003] xhci_hcd 0000:00:14.0: PCI INT A: no GSI
    [ 0.457028] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 0.457038] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
    [ 0.457132] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
    [ 0.457158] xhci_hcd 0000:00:14.0: irq 56 for MSI/MSI-X
    [ 0.457437] hub 2-0:1.0: USB hub found
    [ 0.457454] hub 2-0:1.0: 9 ports detected
    [ 0.460686] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 0.460692] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
    [ 0.460861] hub 3-0:1.0: USB hub found
    [ 0.460871] hub 3-0:1.0: 4 ports detected
    [ 0.461773] ahci 0000:00:1f.2: version 3.0
    [ 0.461915] ahci 0000:00:1f.2: irq 57 for MSI/MSI-X
    [ 0.471676] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 0.472802] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x4 impl SATA mode
    [ 0.472807] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
    [ 0.473307] scsi0 : ahci
    [ 0.473445] scsi1 : ahci
    [ 0.473555] scsi2 : ahci
    [ 0.473668] scsi3 : ahci
    [ 0.473715] ata1: DUMMY
    [ 0.473717] ata2: DUMMY
    [ 0.473719] ata3: SATA max UDMA/133 abar m2048@0xf051c000 port 0xf051c200 irq 57
    [ 0.473721] ata4: DUMMY
    [ 0.763125] usb 1-1: new high-speed USB device number 2 using ehci-pci
    [ 0.793107] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 0.793458] ata3.00: ATA-8: LITEONIT LMT-256M6M mSATA 256GB, DM8110F, max UDMA/133
    [ 0.793461] ata3.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
    [ 0.794069] ata3.00: configured for UDMA/133
    [ 0.794234] scsi 2:0:0:0: Direct-Access ATA LITEONIT LMT-256 10F PQ: 0 ANSI: 5
    [ 0.798767] sd 2:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
    [ 0.798902] sd 2:0:0:0: [sda] Write Protect is off
    [ 0.798906] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 0.798943] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 0.799393] sda: sda3 sda4
    [ 0.799749] sd 2:0:0:0: [sda] Attached SCSI disk
    [ 0.841216] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
    [ 0.887143] hub 1-1:1.0: USB hub found
    [ 0.887202] hub 1-1:1.0: 8 ports detected
    [ 0.946321] systemd[1]: Cannot add dependency job for unit nfs-server.target, ignoring: Unit nfs-server.target failed to load: No such file or directory.
    [ 0.946348] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
    [ 0.960139] EXT4-fs (sda4): re-mounted. Opts: data=ordered,discard
    [ 0.981520] FS-Cache: Loaded
    [ 0.992070] RPC: Registered named UNIX socket transport module.
    [ 0.992075] RPC: Registered udp transport module.
    [ 0.992077] RPC: Registered tcp transport module.
    [ 0.992079] RPC: Registered tcp NFSv4.1 backchannel transport module.
    [ 1.004660] FS-Cache: Netfs 'nfs' registered for caching
    [ 1.007058] Netfilter messages via NETLINK v0.30.
    [ 1.008839] nf_tables: (c) 2007-2009 Patrick McHardy <[email protected]>
    [ 1.023856] vboxdrv: Found 4 processor cores.
    [ 1.024080] vboxdrv: fAsync=0 offMin=0x2c2 offMax=0x31e0
    [ 1.024169] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
    [ 1.024172] vboxdrv: Successfully loaded version 4.3.18_OSE (interface 0x001a0008).
    [ 1.046603] usb 2-3: new full-speed USB device number 2 using xhci_hcd
    [ 1.322293] systemd-udevd[170]: starting version 216
    [ 1.380209] usb 2-5: new high-speed USB device number 3 using xhci_hcd
    [ 1.393592] tsc: Refined TSC clocksource calibration: 2394.460 MHz
    [ 1.439202] systemd-journald[135]: Received request to flush runtime journal from PID 1
    [ 1.471000] hidraw: raw HID events driver (C) Jiri Kosina
    [ 1.476250] systemd-journald[135]: File /var/log/journal/88482a6e208046b4ab2b978eaa052ecd/system.journal corrupted or uncleanly shut down, renaming and replacing.
    [ 1.510556] thermal LNXTHERM:00: registered as thermal_zone0
    [ 1.510560] ACPI: Thermal Zone [TZ00] (28 C)
    [ 1.510856] thermal LNXTHERM:01: registered as thermal_zone1
    [ 1.510860] ACPI: Thermal Zone [TZ01] (30 C)
    [ 1.516235] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 1.526161] ACPI Warning: SystemIO range 0x000000000000efa0-0x000000000000efbf conflicts with OpRegion 0x000000000000efa0-0x000000000000efaf (\_SB_.PCI0.SBUS.SMBI) (20140424/utaddress-258)
    [ 1.526172] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 1.545038] mei_me 0000:00:16.0: irq 58 for MSI/MSI-X
    [ 1.552395] cfg80211: Calling CRDA to update world regulatory domain
    [ 1.576090] [drm] Initialized drm 1.1.0 20060810
    [ 1.580291] random: nonblocking pool is initialized
    [ 1.596486] Intel(R) Wireless WiFi driver for Linux, in-tree:
    [ 1.596490] Copyright(c) 2003- 2014 Intel Corporation
    [ 1.596517] snd_hda_intel: probe of 0000:00:03.0 failed with error -2
    [ 1.596724] snd_hda_intel 0000:00:1b.0: irq 59 for MSI/MSI-X
    [ 1.597671] iwlwifi 0000:02:00.0: irq 60 for MSI/MSI-X
    [ 1.606282] iwlwifi 0000:02:00.0: loaded firmware version 23.214.9.0 op_mode iwlmvm
    [ 1.622623] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
    [ 1.622630] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
    [ 1.622633] sound hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
    [ 1.622636] sound hdaudioC0D0: mono: mono_out=0x0
    [ 1.622639] sound hdaudioC0D0: inputs:
    [ 1.622643] sound hdaudioC0D0: Headphone Mic=0x19
    [ 1.622646] sound hdaudioC0D0: Headset Mic=0x1b
    [ 1.622649] sound hdaudioC0D0: Internal Mic=0x12
    [ 1.627117] ACPI: AC Adapter [ADP0] (off-line)
    [ 1.628753] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
    [ 1.628924] ACPI: Power Button [PWRB]
    [ 1.629010] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input5
    [ 1.630785] ACPI: Lid Switch [LID0]
    [ 1.630887] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
    [ 1.631327] ACPI: Power Button [PWRF]
    [ 1.633943] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input3
    [ 1.634197] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
    [ 1.635366] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x16
    [ 1.635406] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x16
    [ 1.635428] microcode: CPU2 sig=0x40651, pf=0x40, revision=0x16
    [ 1.635449] microcode: CPU3 sig=0x40651, pf=0x40, revision=0x16
    [ 1.635520] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 1.639579] ACPI: Battery Slot [BAT0] (battery present)
    [ 1.640267] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144
    [ 1.640997] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
    [ 1.641000] wmi: Mapper loaded
    [ 1.641249] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
    [ 1.644274] AVX2 version of gcm_enc/dec engaged.
    [ 1.662640] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
    [ 1.707814] iTCO_vendor_support: vendor-support=0
    [ 1.709016] [drm] Memory usable by graphics device = 2048M
    [ 1.709022] [drm] Replacing VGA console driver
    [ 1.710234] Console: switching to colour dummy device 80x25
    [ 1.710749] hid-rmi 0018:06CB:2734.0001: Scanning PDT...
    [ 1.711895] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
    [ 1.711954] iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1860)
    [ 1.712089] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 1.713279] hid-rmi 0018:06CB:2734.0001: Found F34 on page 0x00
    [ 1.715870] hid-rmi 0018:06CB:2734.0001: Found F01 on page 0x00
    [ 1.718203] hid-rmi 0018:06CB:2734.0001: Found F11 on page 0x00
    [ 1.724578] hid-rmi 0018:06CB:2734.0001: Found F54 on page 0x01
    [ 1.727275] hid-rmi 0018:06CB:2734.0001: Found F30 on page 0x01
    [ 1.730545] i915 0000:00:02.0: irq 61 for MSI/MSI-X
    [ 1.730561] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
    [ 1.730563] [drm] Driver supports precise vblank timestamp query.
    [ 1.730596] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
    [ 1.733539] hid-rmi 0018:06CB:2734.0001: Found F55 on page 0x02
    [ 1.738729] hid-rmi 0018:06CB:2734.0001: Found F51 on page 0x03
    [ 1.740512] usb 2-6: new full-speed USB device number 4 using xhci_hcd
    [ 1.744701] hid-rmi 0018:06CB:2734.0001: rmi_scan_pdt: Done with PDT scan.
    [ 1.756260] [drm] VBT doesn't support DRRS
    [ 1.758240] hid-rmi 0018:06CB:2734.0001: rmi_populate_f11: size in mm: 97 x 59
    [ 1.766636] input: DLL060A:00 06CB:2734 as /devices/pci0000:00/INT33C3:00/i2c-0/i2c-DLL060A:00/0018:06CB:2734.0001/input/input8
    [ 1.766734] hid-rmi 0018:06CB:2734.0001: input,hidraw0: <UNKNOWN> HID v1.00 Pointer [DLL060A:00 06CB:2734] on
    [ 1.775456] fbcon: inteldrmfb (fb0) is primary device
    [ 1.802968] input: Dell WMI hotkeys as /devices/virtual/input/input9
    [ 1.808667] mousedev: PS/2 mouse device common for all mice
    [ 1.841252] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
    [ 1.842535] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
    [ 1.842776] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
    [ 1.854793] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 2.394398] Switched to clocksource tsc
    [ 2.838140] Console: switching to colour frame buffer device 240x67
    [ 2.845934] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
    [ 2.845936] i915 0000:00:02.0: registered panic notifier
    [ 2.876371] media: Linux media interface: v0.10
    [ 2.876864] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
    [ 2.877001] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10
    [ 2.877148] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    [ 2.879690] usbcore: registered new interface driver usbhid
    [ 2.879694] usbhid: USB HID core driver
    [ 2.883145] Linux video capture interface: v2.00
    [ 2.892232] input: SYNAPTICS Synaptics Large Touch Screen as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3:1.0/0003:06CB:0AF8.0002/input/input11
    [ 2.892497] uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (0bda:5752)
    [ 2.895106] hid-multitouch 0003:06CB:0AF8.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [SYNAPTICS Synaptics Large Touch Screen] on usb-0000:00:14.0-3/input0
    [ 2.895830] Bluetooth: Core ver 2.19
    [ 2.895849] NET: Registered protocol family 31
    [ 2.895852] Bluetooth: HCI device and connection manager initialized
    [ 2.895861] Bluetooth: HCI socket layer initialized
    [ 2.895864] Bluetooth: L2CAP socket layer initialized
    [ 2.895877] Bluetooth: SCO socket layer initialized
    [ 2.901636] input: Integrated_Webcam_HD as /devices/pci0000:00/0000:00:14.0/usb2/2-5/2-5:1.0/input/input13
    [ 2.901827] usbcore: registered new interface driver uvcvideo
    [ 2.901830] USB Video Class driver (1.1.1)
    [ 2.910511] usbcore: registered new interface driver btusb
    [ 2.925460] Bluetooth: hci0: read Intel version: 370710018002030d2e
    [ 2.925464] Bluetooth: hci0: Intel device is already patched. patch num: 2e
    [ 3.331899] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
    [ 11.275262] systemd-journald[135]: File /var/log/journal/88482a6e208046b4ab2b978eaa052ecd/user-1001.journal corrupted or uncleanly shut down, renaming and replacing.
    [ 35.164461] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 35.241753] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
    [ 35.241999] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
    [ 35.255097] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 36.055112] wlan0: authenticate with c0:25:06:84:57:f0
    [ 36.058891] wlan0: send auth to c0:25:06:84:57:f0 (try 1/3)
    [ 36.061335] wlan0: authenticated
    [ 36.061563] wlan0: associate with c0:25:06:84:57:f0 (try 1/3)
    [ 36.067260] wlan0: RX AssocResp from c0:25:06:84:57:f0 (capab=0x431 status=0 aid=1)
    [ 36.070080] wlan0: associated
    [ 36.070111] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    [ 36.070172] cfg80211: Calling CRDA to update world regulatory domain
    [ 4501.338278] PM: Syncing filesystems ...
    [ 4501.341188] atkbd serio0: Unknown key pressed (translated set 2, code 0xf2 on isa0060/serio0).
    [ 4501.341196] atkbd serio0: Use 'setkeycodes e072 <keycode>' to make it known.
    [ 4501.348617] done.
    [ 4501.348622] PM: Preparing system for mem sleep
    [ 4501.349019] Freezing user space processes ... (elapsed 0.001 seconds) done.
    [ 4501.350459] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
    [ 4501.351580] PM: Entering mem sleep
    [ 4501.351657] Suspending console(s) (use no_console_suspend to debug)
    [ 4501.351917] wlan0: deauthenticating from c0:25:06:84:57:f0 by local choice (Reason: 3=DEAUTH_LEAVING)
    [ 4501.358219] atkbd serio0: Unknown key released (translated set 2, code 0xf2 on isa0060/serio0).
    [ 4501.358222] atkbd serio0: Use 'setkeycodes e072 <keycode>' to make it known.
    [ 4501.361609] cfg80211: Calling CRDA for country: DE
    [ 4501.362122] sd 2:0:0:0: [sda] Synchronizing SCSI cache
    [ 4501.362185] sd 2:0:0:0: [sda] Stopping disk
    [ 4501.992409] PM: suspend of devices complete after 640.028 msecs
    [ 4502.005724] PM: late suspend of devices complete after 13.299 msecs
    [ 4502.006247] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
    [ 4502.006367] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
    [ 4502.019376] PM: noirq suspend of devices complete after 13.638 msecs
    [ 4502.019816] ACPI: Preparing to enter system sleep state S3
    [ 4502.020586] PM: Saving platform NVS memory
    [ 4502.021109] Disabling non-boot CPUs ...
    [ 4502.021139] intel_pstate CPU 1 exiting
    [ 4502.022404] kvm: disabling virtualization on CPU1
    [ 4502.022854] smpboot: CPU 1 is now offline
    [ 4502.023143] intel_pstate CPU 2 exiting
    [ 4502.024386] kvm: disabling virtualization on CPU2
    [ 4502.125774] smpboot: CPU 2 is now offline
    [ 4502.126039] intel_pstate CPU 3 exiting
    [ 4502.127395] kvm: disabling virtualization on CPU3
    [ 4502.229207] smpboot: CPU 3 is now offline
    [ 4502.232189] ACPI: Low-level resume complete
    [ 4502.232259] PM: Restoring platform NVS memory
    [ 4502.232774] Enabling non-boot CPUs ...
    [ 4502.232814] x86: Booting SMP configuration:
    [ 4502.232815] smpboot: Booting Node 0 Processor 1 APIC 0x1
    [ 4502.245238] kvm: enabling virtualization on CPU1
    [ 4502.247462] Intel pstate controlling: cpu 1
    [ 4502.247514] CPU1 is up
    [ 4502.247533] smpboot: Booting Node 0 Processor 2 APIC 0x2
    [ 4502.259870] kvm: enabling virtualization on CPU2
    [ 4502.262107] Intel pstate controlling: cpu 2
    [ 4502.262155] CPU2 is up
    [ 4502.262172] smpboot: Booting Node 0 Processor 3 APIC 0x3
    [ 4502.274504] kvm: enabling virtualization on CPU3
    [ 4502.276760] Intel pstate controlling: cpu 3
    [ 4502.276807] CPU3 is up
    [ 4502.282141] ACPI: Waking up from system sleep state S3
    [ 4502.302447] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 4502.302450] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
    [ 4502.302690] PM: noirq resume of devices complete after 11.863 msecs
    [ 4502.303102] PM: early resume of devices complete after 0.384 msecs
    [ 4502.303194] usb usb2: root hub lost power or was reset
    [ 4502.303197] usb usb3: root hub lost power or was reset
    [ 4502.315679] mei_me 0000:00:16.0: irq 58 for MSI/MSI-X
    [ 4502.315810] snd_hda_intel 0000:00:1b.0: irq 59 for MSI/MSI-X
    [ 4502.329054] sd 2:0:0:0: [sda] Starting disk
    [ 4502.390642] xhci_hcd 0000:00:14.0: irq 56 for MSI/MSI-X
    [ 4502.535888] usb 1-1: reset high-speed USB device number 2 using ehci-pci
    [ 4502.643402] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
    [ 4502.643646] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
    [ 4502.649288] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 4502.652119] ata3.00: configured for UDMA/133
    [ 4502.766135] usb 2-3: reset full-speed USB device number 2 using xhci_hcd
    [ 4502.939946] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880212c09480
    [ 4502.939950] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880212c094c8
    [ 4503.099825] usb 2-6: reset full-speed USB device number 4 using xhci_hcd
    [ 4503.273741] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800bdea5a00
    [ 4503.273745] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800bdea5a48
    [ 4503.273748] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800bdea5a90
    [ 4503.273750] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88020c2a6000
    [ 4503.273752] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88020c2a6048
    [ 4503.274732] PM: resume of devices complete after 970.836 msecs
    [ 4503.275664] PM: Finishing wakeup.
    [ 4503.275668] Restarting tasks ...
    [ 4503.275774] iwlwifi 0000:02:00.0: no hotplug settings from platform
    [ 4503.276362] usb 2-5: USB disconnect, device number 3
    [ 4503.276546] pci_bus 0000:01: Allocating resources
    [ 4503.276576] pcieport 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
    [ 4503.276585] pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
    [ 4503.276592] pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000
    [ 4503.276596] done.
    [ 4503.276614] pci_bus 0000:02: Allocating resources
    [ 4503.276646] pcieport 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
    [ 4503.276653] pcieport 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
    [ 4503.276662] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
    [ 4503.276675] pcieport 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
    [ 4503.276681] pcieport 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 4503.276688] pcieport 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 4503.276695] pcieport 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 4503.276701] pcieport 0000:00:1c.2: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 4503.276712] pcieport 0000:00:1c.0: BAR 14: assigned [mem 0xdfb00000-0xdfcfffff]
    [ 4503.276726] pcieport 0000:00:1c.0: BAR 15: assigned [mem 0xdfd00000-0xdfefffff 64bit pref]
    [ 4503.276739] pcieport 0000:00:1c.2: BAR 15: assigned [mem 0xf0600000-0xf07fffff 64bit pref]
    [ 4503.276748] pcieport 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
    [ 4503.276756] pcieport 0000:00:1c.2: BAR 13: assigned [io 0x4000-0x4fff]
    [ 4503.276773] pci 0000:00:00.0: no hotplug settings from platform
    [ 4503.276778] pci 0000:00:00.0: using default PCI settings
    [ 4503.276791] i915 0000:00:02.0: no hotplug settings from platform
    [ 4503.276795] i915 0000:00:02.0: using default PCI settings
    [ 4503.276809] pci 0000:00:03.0: no hotplug settings from platform
    [ 4503.276816] xhci_hcd 0000:00:14.0: no hotplug settings from platform
    [ 4503.276820] xhci_hcd 0000:00:14.0: using default PCI settings
    [ 4503.276836] mei_me 0000:00:16.0: no hotplug settings from platform
    [ 4503.276839] mei_me 0000:00:16.0: using default PCI settings
    [ 4503.276855] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
    [ 4503.276863] pcieport 0000:00:1c.0: no hotplug settings from platform
    [ 4503.276871] pcieport 0000:00:1c.2: no hotplug settings from platform
    [ 4503.276904] iwlwifi 0000:02:00.0: no hotplug settings from platform
    [ 4503.276912] ehci-pci 0000:00:1d.0: no hotplug settings from platform
    [ 4503.276917] ehci-pci 0000:00:1d.0: using default PCI settings
    [ 4503.276933] lpc_ich 0000:00:1f.0: no hotplug settings from platform
    [ 4503.276938] lpc_ich 0000:00:1f.0: using default PCI settings
    [ 4503.276956] ahci 0000:00:1f.2: no hotplug settings from platform
    [ 4503.276961] ahci 0000:00:1f.2: using default PCI settings
    [ 4503.276976] pci 0000:00:1f.3: no hotplug settings from platform
    [ 4503.276980] pci 0000:00:1f.3: using default PCI settings
    [ 4503.277590] pci_bus 0000:01: Allocating resources
    [ 4503.277619] pci_bus 0000:02: Allocating resources
    [ 4503.277652] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
    [ 4503.277669] pci 0000:00:00.0: no hotplug settings from platform
    [ 4503.277673] pci 0000:00:00.0: using default PCI settings
    [ 4503.277686] i915 0000:00:02.0: no hotplug settings from platform
    [ 4503.277690] i915 0000:00:02.0: using default PCI settings
    [ 4503.277703] pci 0000:00:03.0: no hotplug settings from platform
    [ 4503.277711] xhci_hcd 0000:00:14.0: no hotplug settings from platform
    [ 4503.277716] xhci_hcd 0000:00:14.0: using default PCI settings
    [ 4503.277731] mei_me 0000:00:16.0: no hotplug settings from platform
    [ 4503.277736] mei_me 0000:00:16.0: using default PCI settings
    [ 4503.277751] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
    [ 4503.277759] pcieport 0000:00:1c.0: no hotplug settings from platform
    [ 4503.277767] pcieport 0000:00:1c.2: no hotplug settings from platform
    [ 4503.277801] iwlwifi 0000:02:00.0: no hotplug settings from platform
    [ 4503.277809] ehci-pci 0000:00:1d.0: no hotplug settings from platform
    [ 4503.277814] ehci-pci 0000:00:1d.0: using default PCI settings
    [ 4503.277830] lpc_ich 0000:00:1f.0: no hotplug settings from platform
    [ 4503.277835] lpc_ich 0000:00:1f.0: using default PCI settings
    [ 4503.277852] ahci 0000:00:1f.2: no hotplug settings from platform
    [ 4503.277857] ahci 0000:00:1f.2: using default PCI settings
    [ 4503.277871] pci 0000:00:1f.3: no hotplug settings from platform
    [ 4503.277875] pci 0000:00:1f.3: using default PCI settings
    [ 4503.287972] Bluetooth: hci0: read Intel version: 370710018002030d00
    [ 4503.551878] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
    [ 4503.596787] usb 2-5: new high-speed USB device number 5 using xhci_hcd
    [ 4503.633858] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 4503.755400] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
    [ 4503.797807] uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (0bda:5752)
    [ 4503.801045] input: Integrated_Webcam_HD as /devices/pci0000:00/0000:00:14.0/usb2/2-5/2-5:1.0/input/input16
    [ 4503.943676] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
    [ 4506.058296] dell_wmi: Unknown key e00e pressed
    [ 4507.048423] wlan0: authenticate with c0:25:06:84:57:f0
    [ 4507.051164] wlan0: send auth to c0:25:06:84:57:f0 (try 1/3)
    [ 4507.053766] wlan0: authenticated
    [ 4507.056205] wlan0: associate with c0:25:06:84:57:f0 (try 1/3)
    [ 4507.062403] wlan0: RX AssocResp from c0:25:06:84:57:f0 (capab=0x431 status=0 aid=1)
    [ 4507.065241] wlan0: associated
    [ 4507.065268] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    [ 4812.948936] usb 2-2: new high-speed USB device number 6 using xhci_hcd
    [ 4813.124097] hub 2-2:1.0: USB hub found
    [ 4813.124371] hub 2-2:1.0: 4 ports detected
    [ 4813.392831] usb 2-2.2: new full-speed USB device number 7 using xhci_hcd
    [ 4813.477901] usb 2-2.2: ep 0x85 - rounding interval to 64 microframes, ep desc says 80 microframes
    [ 4813.495517] input: Burr-Brown from TI USB Audio CODEC as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2.2/2-2.2:1.3/0003:08BB:2902.0003/input/input17
    [ 4813.495657] hid-generic 0003:08BB:2902.0003: input,hidraw2: USB HID v1.00 Device [Burr-Brown from TI USB Audio CODEC ] on usb-0000:00:14.0-2.2/input3
    [ 4813.515300] usbcore: registered new interface driver snd-usb-audio
    [ 4813.546263] usb 2-2.3: new full-speed USB device number 8 using xhci_hcd
    [ 4813.648070] logitech-djreceiver 0003:046D:C52B.0006: hiddev0,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-2.3/input2
    [ 4813.699821] usb 2-2.4: new high-speed USB device number 9 using xhci_hcd
    [ 4813.700997] input: Logitech Unifying Device. Wireless PID:1028 as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2.3/2-2.3:1.2/0003:046D:C52B.0006/0003:046D:C52B.0007/input/input18
    [ 4813.701200] logitech-djdevice 0003:046D:C52B.0007: input,hidraw4: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1028] on usb-0000:00:14.0-2.3:1
    [ 4814.121899] ax88179_178a 2-2.4:1.0 eth0: register 'ax88179_178a' at usb-0000:00:14.0-2.4, ASIX AX88179 USB 3.0 Gigabit Ethernet, 00:24:9b:0a:27:f6
    [ 4814.121931] usbcore: registered new interface driver ax88179_178a
    [ 4814.442429] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 4817.483762] ax88179_178a 2-2.4:1.0 eth0: ax88179 - Link status is: 1
    [ 4817.485665] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    [ 6509.605763] usb 2-2: USB disconnect, device number 6
    [ 6509.605773] usb 2-2.2: USB disconnect, device number 7
    [ 6509.660447] usb 2-2.3: USB disconnect, device number 8
    [ 6509.692281] usb 2-2.4: USB disconnect, device number 9
    [ 6509.692540] ax88179_178a 2-2.4:1.0 eth0: unregister 'ax88179_178a' usb-0000:00:14.0-2.4, ASIX AX88179 USB 3.0 Gigabit Ethernet
    [ 6509.692573] ax88179_178a 2-2.4:1.0 eth0: Failed to read reg index 0x0002: -19
    [ 6509.692584] ax88179_178a 2-2.4:1.0 eth0: Failed to write reg index 0x0002: -19
    [ 6509.721655] ax88179_178a 2-2.4:1.0 (unregistered net_device): Failed to write reg index 0x0002: -19
    [ 6509.721669] ax88179_178a 2-2.4:1.0 (unregistered net_device): Failed to write reg index 0x0001: -19
    [ 6509.721678] ax88179_178a 2-2.4:1.0 (unregistered net_device): Failed to write reg index 0x0002: -19
    [ 6511.071805] PM: Syncing filesystems ...
    [ 6511.077462] atkbd serio0: Unknown key pressed (translated set 2, code 0xf2 on isa0060/serio0).
    [ 6511.077473] atkbd serio0: Use 'setkeycodes e072 <keycode>' to make it known.
    [ 6511.085453] atkbd serio0: Unknown key released (translated set 2, code 0xf2 on isa0060/serio0).
    [ 6511.085464] atkbd serio0: Use 'setkeycodes e072 <keycode>' to make it known.
    [ 6511.087129] done.
    [ 6511.087139] PM: Preparing system for mem sleep
    [ 6511.087676] Freezing user space processes ... (elapsed 0.001 seconds) done.
    [ 6511.089183] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
    [ 6511.090294] PM: Entering mem sleep
    [ 6511.090393] Suspending console(s) (use no_console_suspend to debug)
    [ 6511.090786] wlan0: deauthenticating from c0:25:06:84:57:f0 by local choice (Reason: 3=DEAUTH_LEAVING)
    [ 6511.100925] cfg80211: Calling CRDA to update world regulatory domain
    [ 6511.101532] sd 2:0:0:0: [sda] Synchronizing SCSI cache
    [ 6511.101598] sd 2:0:0:0: [sda] Stopping disk
    [ 6511.720807] PM: suspend of devices complete after 629.628 msecs
    [ 6511.734165] PM: late suspend of devices complete after 13.343 msecs
    [ 6511.734991] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
    [ 6511.735113] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
    [ 6511.747808] PM: noirq suspend of devices complete after 13.629 msecs
    [ 6511.748271] ACPI: Preparing to enter system sleep state S3
    [ 6511.749033] PM: Saving platform NVS memory
    [ 6511.749584] Disabling non-boot CPUs ...
    [ 6511.749628] intel_pstate CPU 1 exiting
    [ 6511.751130] kvm: disabling virtualization on CPU1
    [ 6511.752157] smpboot: CPU 1 is now offline
    [ 6511.752650] intel_pstate CPU 2 exiting
    [ 6511.754091] kvm: disabling virtualization on CPU2
    [ 6511.754112] smpboot: CPU 2 is now offline
    [ 6511.755147] intel_pstate CPU 3 exiting
    [ 6511.756491] kvm: disabling virtualization on CPU3
    [ 6511.857520] smpboot: CPU 3 is now offline
    [ 6511.860099] ACPI: Low-level resume complete
    [ 6511.860168] PM: Restoring platform NVS memory
    [ 6511.860682] Enabling non-boot CPUs ...
    [ 6511.860725] x86: Booting SMP configuration:
    [ 6511.860726] smpboot: Booting Node 0 Processor 1 APIC 0x1
    [ 6511.873161] kvm: enabling virtualization on CPU1
    [ 6511.875384] Intel pstate controlling: cpu 1
    [ 6511.875441] CPU1 is up
    [ 6511.875462] smpboot: Booting Node 0 Processor 2 APIC 0x2
    [ 6511.887813] kvm: enabling virtualization on CPU2
    [ 6511.890055] Intel pstate controlling: cpu 2
    [ 6511.890104] CPU2 is up
    [ 6511.890121] smpboot: Booting Node 0 Processor 3 APIC 0x3
    [ 6511.902450] kvm: enabling virtualization on CPU3
    [ 6511.904715] Intel pstate controlling: cpu 3
    [ 6511.904763] CPU3 is up
    [ 6511.910077] ACPI: Waking up from system sleep state S3
    [ 6511.930462] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 6511.930469] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
    [ 6511.930713] PM: noirq resume of devices complete after 11.834 msecs
    [ 6511.931215] PM: early resume of devices complete after 0.474 msecs
    [ 6511.931290] mei_me 0000:00:16.0: irq 58 for MSI/MSI-X
    [ 6511.931308] usb usb2: root hub lost power or was reset
    [ 6511.931310] usb usb3: root hub lost power or was reset
    [ 6511.932049] snd_hda_intel 0000:00:1b.0: irq 59 for MSI/MSI-X
    [ 6512.019117] xhci_hcd 0000:00:14.0: irq 56 for MSI/MSI-X
    [ 6512.030458] sd 2:0:0:0: [sda] Starting disk
    [ 6512.143743] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
    [ 6512.143995] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
    [ 6512.237297] usb 1-1: reset high-speed USB device number 2 using ehci-pci
    [ 6512.350707] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 6512.353607] ata3.0

    Update: I mucked about more after making this post; I installed gnome-alsa-mixer and checked the "internal mic" option and "Auto-Mute mode" (both were off), after this my headphone output works again, and does the built-in microphone (!)
    I have no idea how I ended up in this "broken" situation, or even what this option does, or how to use it without gnome-alsa-mixer (I had to install 15 packages to get this, as I normally don't use gnome)... Sound on Linux still seems no better than when I started using it 15 years ago :-( (I spent about 5 hours on this...)

  • Step backward hotkey not working while using brush tool? - Photoshop CC 2014

    Hi,
    I'm using Photoshop CC 2014 in Mavericks. I've tried using the step backward hotkey (command+option+z) and it seems to work fine. Then I use the brush tool and it stops working until I switch to another tool. I'm a digital artist, so I move very quickly while painting, and switching out of the brush tool to step backward on something slows me down terribly. I'll switch and the hotkey works as intended. I've tried changing it to a different set of keys (for example command+z) with the same results. Is this a bug or a feature?

    Usually it turns out for tablets that aren't mainstream that they just haven't updated their drivers to work with photoshop cc.
    For example, most people don't have problems with wacom tablets in photoshop cc.
    One other thing that could possibly be the cause besides the tablet driver is your graphics card driver.
    If in photoshop cc you go to Edit>Preferences>Performance and turn off Use Graphics Processor and then restart photoshop cc, does that make a difference?
    If it does then perhaps your graphics card driver needs to be updated from the maker of the card.
    (not through windows updates)

  • FIXED: X300 - Touchpad and Touchpoint stop working at random

    Had a user today with an X300 say that his touchpad and touchpoint just 'stopped' working; plugging in a USB mouse allowed him to continue using the laptop, but both onboard devices were dead. We tried the FN + F8 toggle, which normally disables the touchpad; this time it said "UltraNav Driver Not Installed."
    I reinstalled the UltraNav Driver and Utility, as well as the Hotkeys application. Multiple reboots later, the touchpad and touchpoint were still disabled.
    The fix, it seems, is to go into the BIOS (F2 at boot I believe?) under Config --> Mouse --> and disable EITHER the Touchpad OR the Touchpoint. When both devices are active, neither will work. When one device is disabled, the other will work.
    I'm waiting on word from Lenovo about a better fix, but for now this will let you use the laptop without a USB mouse.

    @xyster,
    Have you tried doing a factory recovery?
    *Non Lenovo employee*
    I have a Y2P (i5) ... Feel free to ping me if you want me to test some applications with your Y2P if you have the same model. I don't mind keep doing recovery on it if needed .... =)

  • Ctrl + Shift + T doesn't work anymore. History -- Recently Closed Tabs still works. Other hotkeys still work.

    I am using Nightly-Elm 21.0a1 Recently Ctrl + Shift + T stopped working. History --> Recently Closed Tabs still works. Other hotkeys also still work.
    I already tried Safe Mode, didn't work. In a new profile it does work.
    This guy (https://support.mozilla.org/en-US/questions/853883) seemed to have the same problem. The solution offered was to transfer some files from a fresh profile. I am not sure what files to transfer. I tried the prefs.js, but that didn't help.

    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
    Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
    To Reset Firefox do the following:
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox" button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!

  • Qosmio F50 - How do I bring the Fn-Keys and Hotkeys to work on Windows XP?

    Hello.
    I downgraded my Qosmio F50-137 to XP, found every driver needed for hardware recognition, but am still looking for the Fn-Keys and Hotkeys to work.
    I know (or at least think) that I have to install the "Toshiba Hotkey Utility".
    But this utility needs the "Toshiba common module" for Windows XP to be installed.
    I fond on the web two common modules for Windows XP:
    common_modules_2489A
    and
    common_modules_24895A
    The first one says "This software utility does not support this system.Installation will be terminated"
    The second one says "TVALZ driver installation has failed"
    How can I make the installation work properly? or How can I make the Fn-Keys and Hotkeys work on my F-50 ?
    Thank you in advance
    Camusensei

    Ok sorry for not answering the questions but I have to find a webpage to answer a few things...
    {quote:title=I said:}I've found the XP drivers of other components for my computer on the Toshiba European driver page {quote}
    But I'm not sure it was there, since going there and trying to find the page again drove me to the normal driver page.
    I'm asking your help me finding the page where:
    - You choose your computer in a column by type and then the next column apperar (on it's right), until you have selected your computer, and a button "choose now" appear.
    - When you click this last button, you land in a page where you have more drivers than in the normal driver page of toshiba (for me I had the option of Windows XP, while I don't have it on the normal page)
    - I'm preety sure it was on the toshiba-website, but I don't remember how to find this page again... And since I already formatted...
    I'll continue looking if I can find it again, if someone knows this page, please tell me/us...
    thank you in advance.
    {Edit:}
    YESSS
    Sorry just to edit my message I don't want to double-post.
    Please stop searching, this is it :
    http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/home.jsp#
    if this website can help some people, then it's great. i'm preparing my next message...
    {/edit}
    Message was edited by: Camusensei (90 minutes later)
    {Edit2:}
    By the way, I don't find my X300-145 on this website...
    Only X305-computers referenced in the X-series, does any know why?
    {/edit}
    Message was edited by: Camusensei

  • Bluetooth stopped working on Windows 8 (GT780DX)

    I recently upgraded my MSI GT780DX to Windows 8 and since then my Bluetooth connection has stopped working. I have updated my Intel Bluetooth drivers to Win 8 and nothing has changed. I can see the Bluetooth settings in my controlpanel, but they are greyed out and disabled since my "hot key" above the keyboard isn't functional anymore.
    Can anyone tell me what I am missing? Another driver/BIOS?
    Reference: http://www.msi.com/product/nb/GT780DX-GT780DXR-.html#/?div=Driver&os=Win8%2064

    For the hotkey to work in Win8 installing SCM is required which replaces S-bar for Win7: http://www.msi.com/service/download/utility-19916.html
    Furthermore Win8 requires the radio switch driver for Bluetooth to work: http://www.msi.com/service/download/nbdriver-19312.html

  • TM2 Pen Stops working

    Periodically my pen stops working in slate mode. I've spent now over 4 hours on the phone with tech support trying to fix it. Seems for a while it's fixed and then it stops again.  If I return the device by 4/21 HP will replace it with a new one, but I'm wondering if this is an ongoing problem with other machines?  I litterally am taking notes 9 hours a day in my job so I need a reliable machine. Not sure of the return policy, but I'm inclined to want the money back.    I have two new pens. If one doesn't work neither does the other,  so I don't think the problem is with the digitizer pen. I was told to calibrate the pen multiple times a day.   I have and that has not solved the problem. The drivers have also been reinstalled w/o resolution. About four years ago I had an  HP tablet that worked flawlessly , but it died on me about two years after I got it. Having doubts about my renewed relationship with HP.  Not sure of the return policy, but I'm inclined to want the money back. What do others think? 

    John82,
    Please try to update the following manually rather than relying on TVSU as there could be some delay of drivers using TVSU.
    BIOS 1.19 and above -> Link here
    Tablet Shortcut Menu -> Link here
    Screen Reading Optimizer -> Link here
    Power Manager 3.62 and above -> Link here
    UltraNav Driver-> Link here
    UltraNav Utility -> Link here
    Hotkey package -> Link here
    Also when the pen stop responding, does the whole system freeze or only the tablet does not accept pen input?
    //JameZ
    Check out the Community Knowledge Base for hints and tips.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    X240 | 8GB RAM | 512GB Samsung SSD

  • Hibernation/sleep stopped working

    After the recent updrade (with kdemod) on my laptop the hibernation stopped working (sleep also). I dont really know what could be the problem but I was working perfectly.
    Now the sleep/hibernate buttons dont work also when i close the laptop lid nothing happens.

    I'm not very knowledgeable about this, so hopefully someone else will weigh in on this. I have no idea how KDE does its thing; I set up suspend/resume independently of X. This method will not lock your session on resume (you won't be prompted for your password), but it is also possible to do that.
    If you have acpid installed, in /etc/acpi/, you should have a script named handler.sh. Mine looks like this:
    #!/bin/sh
    set $*
    case "$1" in
    button/lid)
    #echo "LID switched!">/dev/tty5
    grep -q "open" < /proc/acpi/button/lid/LID/state
    if [ $? = 1 ];
    then
    #lid was closed
    logger "acpid: lid closed; suspending"
    /usr/sbin/pm-suspend
    else
    #lid was opened
    /usr/sbin/pm-resume
    logger "acpid: lid opened; resuming"
    fi
    ibm/hotkey)
    case "$4" in
    00001003)
    logger "acpid: screen blank button (Fn+F3) pressed; ignoring"
    00001004)
    logger "acpid: sleep button (Fn+F4) pressed; suspending"
    /usr/sbin/pm-suspend
    logger "acpid: action $4 undefined or not implemented yet"
    esac
    logger "ACPI group/action undefined: $1 / $2"
    esac
    (I cut out a lot of stuff that's irrelevant to suspend/resume.) You may be able to cut/paste the button/lid part directly. If you don't have an IBM computer, ibm/hotkey probably won't work for your sleep/hibernate buttons. However, what you can do is run the program acpi_listen from a terminal and press your sleep or hibernate button. If it prints something out, you can try replacing the "ibm/hotkey" and "00001004" with the appropriate fields. For reference, here is what I get when I run acpi_listen and press my sleep button:
    ibm/hotkey HKEY 00000080 00001004

  • Lenovo Power manager gauge stop working

    Hello,
    my Power manager gauge stop working, i dont know what is the problem. I uninstall it with driver and intall a new one.
    It worked only if I dont restart my notebook. 
    after restart it shows this again:
    http://i.imgur.com/68AHT.jpg
    http://i.imgur.com/jyUbT.jpg
    http://i.imgur.com/9cP2i.jpg
    http://i.imgur.com/Flm9Q.jpg
    http://i.imgur.com/PKTp2.jpg 
     If i break some rules sorry i am here first time.
    Please Help 

    Hello,
    if you click the "Battery"-tab, do you get shown battery - informations or are all items empty?
    In that case do the following steps:
    remove Powermanager
    remove Hotkey driver
    remove ACPI-powermanagement driver
    reboot
    install ACPI powermanagement driver
    install hotkey driver
    install powermanager
    depending on the latest installation sources you will find the installation files in one of the following directories:
    C:\DRIVERS\WIN
    C:\SWTOOLS\DRIVERS
    C:\Program Files\Lenovo\System Update\session resp. C:\Program Files (x86)\Lenovo\System Update\session (on 64 bit OS)
    My home-forum: http://www.thinkpad-forum.de
    Wiki: Deutsches ThinkPad-Wiki English ThinkWiki
    My ThinkPad-Collection

Maybe you are looking for

  • How to open and convert XFDL

    I have a few XFDL documents that I was unable to open, i downloaded PureEdge and I can now open them but with some glitches. But I was wondering is their a way that I can export or conert them to PDF after I edit them? or is their a way i can just us

  • How do I allow my iphone 5c to trust the computer if the screen doesn't work

    I broke my screen and I wanted to back up my Iphone one last time so i can all of my recent pictures and contacts. I would use Icloud, but I didn't sign this phine up for it.

  • My iTunes crashes every time I plug in my iPod!

    I have two rather older Apple products A 160gB classic ipod and a MacBook with OS X 10.5.8. Lately, everytime I plug my iPod in my itunes crashes while attempting to sync. The computer recognizes the iPod ad I am able to safely eject it but I can't g

  • Importing a .class file into my package?

    Hi. I'm making a java program but I need to use an external .class file to get variables and use methods from. Is it possible to "import" a class file into my package to be able to do so? Thanks

  • Discoverer 3.1 not connecting with user edition

    Hi all Since yesterday we were unable to connect to a database using discoverer 3.1 as user When i use admin edition i can connect to this database I have checked for duplicate entries in the tnsnames.ora The error i receive is : ORA-12154 If there w