Hotmail active view problem

Last week suddenly Hotmail Drag & Drop feature stopped working. I thought it was only a browser or cache problem, but it doesn't work on Aurora either, nor other browsers like Chrome, only works in IE8+ and IE9.
I realized it was the whole "active view" features that wasn't working and it showed Hotmail in classic view all the time.
I wrote to Hotmail Live about this and they asked me to ask the browser's support team about my concern.
I am not convinced it is a browser issue. I haven't upgraded my browsers recently. I'm not the only one with this problem.
Thanks you for your help.

Since last week active view has gone missing and I can no longer preview any photos or videos. Tried today with IE and there isn't a problem, it's only when I use Firefox.

Similar Messages

Is there a way to automatically open the Activity Viewer & make it float?

I just upgraded from Panther Mail, and I really miss knowing what was going on and having to constantly open the activity viewer and reordering the windows every time I do something. Is there a way to somehow make the activity viewer open with mail each time and keep it floating above the other windows (so I can have an indication of what's going on like in Panther Mail)?
I'm afraid I'm going to shut mail down in the middle of a crucial activity. No doubt that might well be behind all the problems that develop with it over time.
Thanks!

I had two problems relating directly to the Tiger upgrade, one I solved with help here. That was importing saved mail that failed to be imported into one mailbox, the saved messages were showing up as IMAP messages ("haven't been downloaded from the server yet"). When both my accounts were POP, I never even had an IMAP account. I solved that and everything else with mail is fine now, except I want to see what's going on like I was able to in Panther. I especially miss not seeing outgoing mail sent progress, especially with long messages.
The other issue was font related, and I still cannot get Fontbook to save the fonts I have disabled, so I just removed the duplicates manually (leaving the ones in the system folder as the defaults). As long as I don't open fontbook again, and it doesn't automatically re-enable the fonts, my system is fine. I will leave it alone now for a couple of years like I was able to in Panther. I have over 3000 fonts installed and available at all times which I need for my print work.
Other than that and a 25 minute log-in time (as it reads the fonts; in Panther it was 7 minutes and I learned to live with that) everything is finally ok.
The long log-in might also be Spotless related; I don't know enough about it to figure it out; all I know is if it is, it is a small price to pay for the way the system flies not having to index all my loaded drives all the time, not to mention the wear and tear on my drives.
Tiger is so much faster than Panther (once I shut down Spotlight) it's like having a processor upgrade. Once you work out all the glitches, it's definitely worth the money and time put in. I was very careful with the install... counting backup time the usual precautions and updates to everything afterward (including third-party programs), it took over 30 hours.
Thanks!

Checked-In Activities not showing in Activation View

All,
Having a bit of trouble with our NWDI that just started happening.   Normally, when we check-in an activity in the Open Activities view of the Development Configurations perspective in NWDS, we should be getting a dialog that asks whether we want to go ahead and activate that activity.   This is no longer happening.
Additionally, if we switch to the Activation view in NWDS, the activities do not appear there.
We have a work-around (going through the CBS web UI, finding the activities, and manually activating them), but it's less than desirable.
Any ideas of what might be causing this problem?    Perhaps issues with the NWDI track? Any suggestions are welcome.
Thanks!
Edited by: Peter Rauchenstein on Jun 23, 2008 5:52 PM

Akshatha,
I have tried what you suggested, but this appears to only be another work around (I'll still award you some points though, because I think it was helpful).   I am a member of both the NWDI.Administrators UME group and the NWDI.Developers group, so I can see all pending activities for all users when i apply the filter.
However, when I do not apply the filter (current user), I can not even see my OWN activities, despite having admin privileges on that user.   Perhaps something is incorrect in the assigned actions for the NWDI.Developer role?
However, I appear to have the correct actions assigned...
UME -- sap.com_com.sap.lcr -- LcrInstanceWriterNR
UME -- CMS -- Display
UME -- CMS -- Export
UME -- CBS -- Developer
Any other ideas of what might be causing this issue?   We are on NW SP15 and are also using the SP15 version of NWDS.
Thanks!
Edited by: Peter Rauchenstein on Jun 24, 2008 8:39 AM

Gnome 3 activity view hangs??

I am using Gnome 3.2.1-1
If I activate the activity view ( by holding mouse in upper right corner), normally several icons appear to show my applications available. Nothing appears when I do it now.
Also, if I type in the search bar of the activity view, then the activity view "crashes" and returns to a desktop view.
How do I search for my issue?
Thank you
P.S. Over the past few days while using Gnome 3 , the system logs out back to the login screen without warning. Are these problems related?

can your graphics card can do full 3D?
Did it have any issues previously?
lspci -vvv
might be right way to start, here.

Activity viewer?

Is there any type of activity viewer or progress indicator for the publishing of an iWeb site? Sure would be great to know how long I'm in for when making updates or changes to the site. I would like to build on my blog...but right now it takes so bloody long for the site to upload...I'm discouraged from making updates. Anyone else have this issue?

In iWeb 1.1.1 there are little clock-icons on the left of each of your sites that show how far along they've Published so far.
If you get the error while Publishing then check out this link:
http://web.mac.com/theshow2/iWeb/iWebtricks/Tips/49930850-052C-424F-AF82-24F12D0 38DBA.html
Oh and as James would say,
If you find this information useful or if it offers a solution to your problem, please mark this reply either as "solved" or "helpful" using the little buttons in the title bar of this reply. Thanks!
TheShow
Final Cut Pro 5 Certified Pro, level I

Remote Control and Remote View Problem

Hi,
I work at a High School running Netware 6.0 SP5 and Zen works 4.01 ir7.
Remote Control and Remote View works great but I noticed one problem.
We have a logo of the school that is forced down on to the desktop when a
user logs in through group policies. This logo works perfect for the
desktop wall paper and loads every time a user logs in.
When I Remote Control or Remote View a computer the users desktop wall
paper turns from the logo being forced down through group policies to the
desktop to a blue desktop wall paper.
I would prefer the desktop wall paper staying the schools logo when I
Remote Control or Remote View because if the desktop wall paper changes to
the blue color I mentioned above when I Remote Control or Remote View the
users computer, they will know that someone is taking over their computer
which sometimes we dont want them knowing.
We have Windows 98SE computer running Novell Client 3.4 and we have some
computers running Windows XP Professional SP1 and Windows XP Professional
SP2 both running Novell Client 4.91 SP2.
The Remote Control and Remote View problem of the desktop wall paper
changing on the users computer occurs on all operating systems mentioned
above.
Is there a solution to my above problem? When Remote Controlling and
Remote Viewing someone's computer I don't want the desktop wall paper to
change.
Thanks!

Bpilon,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

A bug with flags and active view? Or is it a (bad) feature?..

As I mark an image in a folder view as flagged and then switch to a collection view and look on the same image, it's not flagged.
I expect, that information about marking the image as flagged remains on that image, not on a current active view.

It's as designed - Flags are local to a Folder/Collection.
>Or is it a (bad) feature?
It depends - some think it's a great and others hate it with a passion.

Difference between refresh of Report in Active Viewer and Active Studio BAM

We use the Oracle SOA Suite with BAM (on Linux) 10.3.2.0.
I have 2 questions:
1. We have made a report with several items and in Active Studio --> Select Report --> Edit mode --> I see the correct values for my report. When I open my report in Active Viewer I see data from yesterday. The report is not being refreshed. How can I change this, what is causing this difference between Active Viewer and Active Studio in Edit mode??
2. One of my items in my report always gives the message: opening (only in Active Viewer, in Active Studio/edit mode I can see the correct data).

Is your popup blocker turned off? I can only imaging that the popup blocker may be keeping the Live Data window from appearing and updating the dashboard. Active Studio doesn't do a Live update, but an update on report load.

Safari 6: What happened to "Activity" view? Also Web Inspector Network view doesn't work.

Hi all,
I "upgraded" to Safari 6 and while it's super-fast and snappy as ****, I'm missing two features:
1) Activity view is gone! It was the easiest way to see what kind of crap websites are loading and you could double click on files and view them. Now that's gone.
2) I then tried using Web Inspector to try to track down a FLV file that was being loaded (something that worked with old Safari) and I couldn't do it anymore... Flash loading is not visible in Safari 6 and yet it was in previous Safari.
Ugh... new Safari is a great but they took two of my favorite options
Is there something I'm missing or are these features really gone?

Ugh... new Safari is a great but they took two of my favorite options
Send feedback > Apple - Safari - Feedback
If you have the ClickToFlash extension installed, that can prevent Flash based video from streaming. It can also be installed as a plugin in /Library/Internet-Plug-Ins.
Check to see if Safari is running in 32 bit mode. Right or control click the Safari icon in your Applications folder then click Get Info. If the box next to: Open in 32 bit mode is selected, deselect, quit then relaunch Safari.
And try uninstalling the currently installed Flash plugin then reinstall new > Troubleshoot Flash Player | Mac OS
Open System Preferences > Flash Player then select the Storage tab. Click: Delete All

Maintenance view problem "No data maintenance Authorization; Display only"

Maintenance view problem
Question 1>>>>
> I have created a table with Display/maintenance allowed and technical setting Data class - APPL0 (master data, transparent tables).
>> Then I have created a maintenance view thought utilities->table maintenance generator where i have specified the Authorization group as &NC& (w/o auth. group)
->and also created a function group and specified in the maintenance screen-> I have selected maintenance type as one step-> i have given the overview screen number->and in Recording routine i have selected - no, or user ,recording routine.
>>> Now when i go to transaction SM30 and put the table name and press on maintain button I get a information box saying "No data maintenance Authorization; Display only".... and it only displays the data.
my problem is I want to enter data through maintenance view (SM30).
2nd Question >>>> once i create a function group for maintenance view how can i assign a transaction for this. (as if i do it as we do for a module pool program it gives me error)Thank you.
kailash

SE93. Enter a transaction name. Create. In the pop up enter a title and select 'Transaction with parameters'.
Next screen fill the following;
Transaction 'SM30'
Check 'Skip first screen'
In the table control at the bottom of the screen
Name of screen field 'VIEWNAME'
Value <your table name>
Name of screen field 'SHOW'
Value 'X'
Save.
Job done.

Error while validating/activating views in SAP HANA

Hi,
I are getting below error while activating/activating view in HANA
"exception 40109:nrepository/base/activation/activator.cpp:176nRepository: Encountered an internal error in the repository code, this is most likely a bug in the implementation;Activator failed to retrieve/lock NRIV entry for domain activation_idnexception 71000139:nptime/query/plan_executor/trex_wrapper/trex_wrapper_body/trex_update.cc:2123n[2458] current operation cancelled by request and transaction rolled backn "
Please suggest why this error is coming & how can we rectify it.
Regards
Divyank Mehta

Hi Krishna,
I am getting same error while activating the View.HANA Studio version is 85.
Thanks

Adobe Content Viewer problem. Please Help me...

Hi after updating online. Folio, I tried to update the trial version of the publication on my iPad but I get this message: "the issue isavailable for dowload, but new signing for an application version. Update the application from the App Store. "I went to the AppStore and was not any update of the Content Viewer ... I deleted the version on my iPad I downloaded again ... but without success gives me the same problem ... Please help me ... how can I do??
thanks

Hello Bob and thank you for responding so quickly ... Would you be kind enough to send me the link where I can download older versions of Folio Builder and Folio Producers Panel tools for InDesign 5.5. I'm looking for them but I can not find them.
Thank you for your patience.
Il giorno 21/gen/2012, alle ore 16:18, Bob Levine ha scritto:
Re: Adobe Content Viewer problem. Please Help me...
created by Bob Levine in Digital Publishing Suite - View the full discussion
As discussed in numerous threads already, the new viewer has not been approved by Apple yet.
If you’re a pro or enterprise customer you can create your own viewer app. If not, you’ll have to wait or roll back to the older tools.
Bob
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4155907#4155907
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4155907#4155907. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Digital Publishing Suite by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Flash Player viewing problems

I'm having full screen video viewing problems on facebook which I hope to get resolved.When selecting a video to view on Facebook the video goes to about a 2" high strip across the bottom of the player. When this happens I have to click the full screen icon on the bottom right corner of player to view the video, so far this problem is only happening on FB. I would like to know what's causing this problem and how to get it resolved. I've got the current player version and all my Computer Software and Drivers are up to date
My System Info
Gateway Laptop
Windows 7 HP w/SP1
IE11
Flash player current 15.0.0.233
Norton 360

Yes, it says it is enabled:
Name:
Shockwave Flash Object
Publisher:
Adobe Systems Incorporated
Type:
ActiveX Control
Version:
10.1.82.76
File date:
Date last accessed:
Today, March 08, 2012, 20 minutes ago
Class ID:
{D27CDB6E-AE6D-11CF-96B8-444553540000}
Use count:
24711
Block count:
0
File:
Flash11e.ocx
Folder:
C:\WINDOWS\system32\Macromed\Flash

My illustrator CS6 is having screen viewing problems. Everything is blurry

My illustrator CS6 is having screen viewing problems. Everything is blurry

All files look almost as if they are in a draft mode. Doesn't matter witch file I open they all look the same. but very thing is printing out fine. Also I tried creating a test user and down loaded the trial version and it works fine.

Cover Flow view problems

Hello Everyone and congratulations for the Support Forum!
I am experiencing Cover Flow view problems since I installed iTunes 10 on my windows based laptop.
I here enclose address of a picture to let you better understand which the problem is.
http://img684.imageshack.us/i/itunescoverflow.jpg/
I kindly ask you for providing a solution on the issue.
Thanks and Regards,
Antonio

Hi,
I found the solution here : http://discussions.apple.com/thread.jspa?messageID=12623727&#12623727
I rebuilt my library...
Enjoy :-D

Hotmail active view problem

Similar Messages

Maybe you are looking for