Hotmail Not Recognized When Ordering from Websites

Frequently when I try to order from a catalog website, it won't "take" my hotmail address. This only happens on my IPAD. The address is listed as my primaty address in the mail function. I have to use my IMAC to place an order.
The message tells me my e-mail address is not in the proper format. Thank you.

Hi,
On your iPad.
Tap Settings / Safari / Reset Safari.
Delete the cache / cookies and history.
Now tap Settings / Mail, Contacts, Calendars. On the right tap your hotmail account name under Accounts. Make sure you have the correct email address and password stored there.
Restart your iPad.
Press and hold the Sleep/Wake button until the red slider appears. Slide your finger across the slider to turn off iPad. To turn iPad back on, press and hold the Sleep/Wake until the Apple logo appears.
See if that helps...
... I have asked the moderators to move your thread to the iPad forum. Just so you'll be aware
Carolyn

Similar Messages

Hard Drive not recognized when booting from XP CD on docking station

The hard drive on my X60 failed to the point where I couldn't recover and reinstall the image. I have backups of all my data and a docking station so I didn't sweat it. Bought a new drive and installed it and this is when the trouble began.
I created an XP CD with SP2 slipstreamed in to make sure I have the latest drivers. I boot from XP CD and everything works until I try to install Windows. According to the installation CD there is no drive installed!
I reinstalled the drive to make sure and this time I booted off of Ubuntu Linux which installed flawlessly. That leads me to believe that there is a driver problem with Windows.
I need help! I would like to install Windows on the machine but nothing I've tried works.

edgardo wrote:
According to the installation CD there is no drive installed!
Standard Microsoft XP SP2 does not come with any SATA device drivers.
You have two options:
Go into the T60 BIOS and switch the SATA controller mode away from AHCI to "IDE" mode (or pehaps its "legacy" or "compatibility" mode - I forget what specific term is used in a ThinkPad BIOS).
Find the SATA device driver for XP (it's probably in the Intel Chipset driver download) on the Lenovo X60 support web site, download it and install it using the additional driver installation option which is offered right at the start of an XP install.
If you chose option 1, remember to switch the SATA controller back to AHCI mode in the BIOS after you have installed the SATA device driver.
Cheers,
Bill
Message Edited by billbolton on 03-09-2008 02:11 PM
I don't work for Lenovo

New hard drive in, not recognized when boot from DVD

Well, I installed my new Seagate ST3750640AS, 750 GB Baracuda and when I boot from the Tiger install DVD, there is no Hard Drive listed. What could have gone wrong. I have an early model G5 iMac.

Are you sure the cable is connected? Look at the [DIY|http://www.apple.com/support/manuals/imac> for replacing your drive and see if there's anything you may have missed.

HT4528 My Apple ID or password is not recognized when I tried to download an app. I reset my password but it still did not work. My id and password worked fine on this website.

My Apple id and password is not recognized when I tried to download an app. I reset my password but it still did not recognize it. This website recognized it.

Did you go to Settings>iTunes and App Stores and sign out and sign back in?

TS3276 My o2 email account does not work when sending from my MAC it will accept incoming mail but not send it gives me a message that o2 account (offline) my mac I have no problem with my iPhone or mac laptop. any suggestions please.

My o2 email account does not work when sending from my MAC it will accept incoming mail but not send it gives me a message that o2 account (offline) my mac I have no problem with my iPhone or mac laptop. any suggestions please.

Sorry for the delay...
I did what you've told me, new account and manually copied my files from Time Machine. I had lots of permissions problems, but at the end, almost everything is in order... It seems it had to be with some of the Apple Preferences, but I can't be sure, as most of them were dumped to the trash can.
I still don't have my Mail Rules back, unfortunately, although I did goggled some. It is a pity, as I had around 30 or 40 of them, getting my mail in order to each of its mailboxes, but it is a small price as the rest doesn't show the before syntoms.
Thanks for the help, anyway!!

[SOLVED]Hard Disk not recognized when installing

Hey all, I'm just starting with Arch and I've had some trouble installing it on my Acer netbook.
My first installation went well except that I had forgot to download the wireless tools so I decided to do a fresh install as I had no access to a wired connection at the time. The second installation attempt must have had some error on my part as Arch failed to start after selecting it from Grub, saying that the kernel was not available/not recognized.
Now my subsequent attempts at installing have failed because the hard disk is not recognized when running either cgdisk or cfdisk. Instead of showing my hard drive partitions after running
cfdisk /dev/sda
it shows my usb drive. If I instead use
cgdisk /dev/sda
it displays an error saying that the disk is damaged or not recognized. When I first saw this I thought my disk was failing, so I tried #! to see if it would show the same error, but it was able to recognize the entire disk and install correctly. Now, even after having the entire disk formatted as ext4 with #! installed, cgdisk is still giving me the same error about a damaged disk.
Am I doing something incorrectly or is there a fix for this? I haven't been able to find any information about this after a good while of searching.
Thanks for your help.
Last edited by Forest_Leaves (2013-03-05 08:30:24)

srs5694 wrote:The cgdisk "damaged disk" error is probably a result of the tool seeing an MBR partition table on your USB flash drive, rather than the GPT disk it's expecting. If I'm right, you should not follow s1ln7m4s7r's advice, since that will simply trash your USB flash drive!
If you mean by trashing the USB flash drive, that it will delete all data and partitions on the selected drive it is correct, because:
dd if=/dev/zero of=/dev/$disk bs=4096 count=1
- this will delete all partition-table data
sgdisk -o /dev/$disk
- this will clear out all data. This includes GPT header data, all partition definitions, and the protective MBR.
/dev/$disk
- this will make you enter ncurses-based GUID partition table (GPT) manipulator, where you can create new partitions
You should only do this if you are certain of what disk it is.
Now if when you said this, you were meaning it will became broken, then it may be a special kind of usb drive because i've donne it many times and i've not broken any.
srs5694 wrote:My guess is that either your hard disk has become /dev/sdb (this can happen in some cases; disk identifiers aren't really fixed) or you're missing a driver for your hard disk controller because you've booted a different kernel or a different initrd file. Another possibility is that there's a hardware fault -- probably a loose cable -- that's preventing the kernel from seeing the disk.
If the usb drive is not where you installed arch, then you need to find if there are more recognized drives:
lsblk | grep disk
And see the uuid of the root partition you want, and add it to your bootloader boot line:
blkid /dev/sdxx
Last edited by s1ln7m4s7r (2013-03-04 19:17:36)

Access 2010 on 64 Bit Windows 7 Access "Not Responding" when changing from forms view to design view and back

I am running
Windows 7 64 bit
Access 2010 32 bit
Developing an application with a split FE BE with both files local but continue to have the message "Not Responding" when switching from forms view to design view and back as well as if I try to connect to a subform or object on the sub form.

I have seen this behavior when the form's RecordSource is a complex query such as a crosstab or a query with several nested queries. To test if this is your case, remove the RecordSource and see if the form starts acting normal again.
Then again, if the form has several subforms they might be slowing up the loading time.
Bill Mosca
www.thatlldoit.com
http://tech.groups.yahoo.com/group/MS_Access_Professionals

Lightroom 4.4 not recognizing RAW files from supported cameras

I started to get problems with Lightroom not recognizing RAW files from my Fuji XE-1 and Canon 5D Mark 3 cameras but I thought it was a problem with RC. After downloading some files today in 4.4 without a problem I encountered the same error message (unable to inport listed RAW files) again. The files open fine in Bridge. Any idea what is causing this problem?

Hi Geoff
I use a Mac with the latest version of Mountain Lion OS. The image files are being imported from the cards; in the case of the Fuji an SD card inserted in the card reader slot on the Mac and in the case of the Canon a CF flash card in a card reader attached to the Mac.
Appreciate any help you can provide.

The sort field is not used when ordering multiple cds in one alumn folder, how do I correct this?

It is using the track number and not the sort order field. The reason I have multiple cds in one alumn is because they are books on cd.

Sorry for the typo my "b" key was not working correctly.
The sort field is not used when ordering multiple cds in one albumn folder, how do I correct this? It is using the track number and not the sort order field. The reason I have multiple cds in one albumn is because they are books on cd.

Disabled ipod not recognized when plugged back in to itunes.

Daughter's disabled ipod (second time) is not recognized when we follow instructions to enable it and plug into itunes.

HT1808 is the article you need to follow. You need the section labeled "Placing the device into recovery mode."
You need to power the device off. Once the device is off press and hold the Home button or the button on the front of the device and while holding the Home button plug in the device and continue holding the home button until you see the image below.

Ethernet not connecting when resuming from sleep/hibernate

I use my mac (Win7) in clamshell mode quite often, and I leave the cables connected (ethernet, power, display, etc). I have noticed since installing the 3.0 Boot Camp drivers that the ethernet connection is not recognized after resuming from sleep/hibernate. I need to disconnect the cable and re-plug it in for the system to recognize the network. Anyone else seeing this?

Look through Power Options for sleep and network. There should be sleep, low power, etc. And if possible, maybe you can manually update drivers from the vendor (not Apple). And if Windows or your update doesn't work as well, then you can just as easy use Device Manager and "rollback" the last driver upgrade - a great feature. Also, use those Create/Restore Check Points.
I use to have trouble, got tired of having this issue, and bought a new modem to replace my 5 yr old model. Problem gone. Same can happen regarding routers, sometimes a firmware update, but I had one router that had been superceeded by 4th generation and no firmware patch anymore.

Serial number not valid when upgrading from LR4 to LR5 [was:leewayphotography]

J’ai acheté LR 4 il y a 1 an avec le n° de série sur la boite. J’ai acheté l’upgrade pour LR 5 et je n’ai jamais pu installer la version définitive avec ce n° de série.Ce n° de série n'est pas valide. La durée version d’essai est terminée et donc je dois retourner à LR 4 pour continuer à travailler ? Pourquoi cela ne fonctionne pas?

Bonjour.
J'ai bien compris votre réponse qu'il fallait utiliser un nouveau n° de série. J'ai bien téléchargé LR5 le 18 mars 2014, j'ai bien reçu une facture
n° IEE2014000174985 mais je n'ai pas de trace d'un nouveau n° de série. Il n'est pas sur la facture, ni dans le logiciel?
Que faut-il faire
Leewayphotography
From: John Waller
Sent: Monday, April 21, 2014 10:14 PM
To: leewayphotography
Subject: Serial number not valid when upgrading from LR4 to LR5 was:leewayphotography
Re: Serial number not valid when upgrading from LR4 to LR5 was:leewayphotography
created by John Waller in Photoshop Lightroom - View the full discussion

Serial number not recognized when I update lightrrom

serial number not recognized when I update lightrrom

More specifics might be helpful, but try this info site
Lightroom and Creative Cloud FAQ

I'm getting a message "USB Device Not Recognized" when I try to sync my iPad. What should I do?

I'm getting a message "USB Device Not Recognized" when I try to sync my iPad. What do I do?

Is the iPod Touch specifically stated as being compatible? Have you tried to perfrom a hard reset of the iPod with it still connected? To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
B-rock

I have downloaded Flash and it says sucessful install and yet is not recognized when I go to YouTube

I have downloaded Flash and it says sucessful install and yet is not recognized when I go to YouTube

Flash Player Help | Installation problems | Mac OS
Flash Player Help | Installation problems | Flash Player | Windows
Mylenium

Hotmail Not Recognized When Ordering from Websites

Similar Messages

Maybe you are looking for