Hotspot 890l VPN set up

Other then the booklet - How do I set up a VPN? There is no option for the pre-shared key that I have set up in the firewall at work. I cannot connect from my laptop and the Verizon wireless device. Customer service and Tech support mumbled something about port forwarding but they were unclear. So as I said in the beginning How do I setup a VPN?
Thanks,
Gaylen

I did find similar problem after, thus what is the correct procedure to
install hotspot so that the weblogic 5.1 will use it and benefit from it.
Let say that I have installed jdk and weblogic as follows
c:\jdk1.2.2
c:\weblogic
what next ?
"Michael Girdley" <[email protected]> wrote in message
news:8clj5d$i7p$[email protected]..
Do you see the same problems when you're not using hotspot? These sound
like class path problems.
Michael Girdley
WLS Product Manager
Chris <[email protected]> wrote in message
news:8cj488$pp8$[email protected]..
Hi,
I have WL 5.1 installed under winNT, and I am tiring to run it in
hotspot
how ever I am getting and exception, no class found javax.jndi.naming.every
time I try running it.
What is the proper installation instruction for hotspot and WL under NTand
Sun?
Here are the steps I took.
I have installed 1.2.2, then WL 5.1 then I installed the hotspot 2.0rc1.
Then I used the wlconfig to change the JAVA_HOME however I can't start
the
server. Any help would be greatly appreciated.
NOTE:
the class path has the weblogicaxl,jar << I can't remember the nameexactly
I am at diffrent computer...

Similar Messages

My server not Working use Hotspot Shield vpn what I do

Purchased Hotspot Shield vpn $9.99 per year but not Working what happent no suit with my server or someting wrong I have been Email Hotspot Shield support no answer

Hello,
Why are you handing out 192.185.2.1 through 192.185.2.10 in your VPN Addresses
Should this 192.168.0.XXX through 192.168.0.XXX and out of range on what the router is handing out?
Why don't you try making your Server 192.168.0.2 using your router as the gateway of 192.168.0.1
Set your router's DHCP scope 192.168.0.10 through 192.168.0.100
Set your VPN addresses for L2TP 192.168.0.101 through 192.168.0.149
Set your VPN addresses for PPTP 192.168.0.150 through 192.168.0.199
Thanks,
ebrind
Message was edited by: ebrind

What is a the definition for VPN setting?

What is a VPN setting?

Use Google
Also see this Apple Support
http://support.apple.com/kb/ht1424

Why my VPN setting can't remove it on MBP

Why my VPN setting can't remove it on MBP

Held the COMMAND key down and dragged the problem Untitled CD to trash. That worked thanks to all of you who had posted help to previous complaints!!!

What is the, iPad2 VPN setting for "transmit ALL data stream" equivalent in PC VPN?

What is the,
iPad2 VPN setting for "transmit ALL data stream" equivalent setting in PC VPN?
Thanks.
Or there is not equivalent part?
-namlow

Great question, Aerogoob.
The XY graph can be bound to a 1d array of "points", where each point is a cluster of two numerics (X and Y). To create a shared variable of this type, you can set the data type to "From Custom Control..." in the shared variable properties dialog. Of course, first you'll have to build the custom control of the correct type: array of cluster of two numerics.
If any of that doesn't make sense, please post back and we can walk you through it in more detail.
Also, just for completeness, the chart indicator can be bound to a scalar numeric or to an array of numerics. The graph indicator can only be bound to an array of numerics.

Verizon Jetpack 4G LTE Mobile Hotspot 890L. Is there a problem with Windows 7?????

I have Verizon Jetpack 4G LTE Mobile Hotspot 890L. Have had it for almost 2 years. I was on the internet with my Dell desktop and all of a sudden got a message "not connected to Internet". Spent an hour with Verizon and the Jetpack works fine on my NOOK and another tablet and they said to call Dell. After an hour with them they said Windows 7 is not compatible with a HotSpot and they do not support it. I had a friend check out my computer (as Dell wanted over $200) and found nothing wrong and it connected fine to his wifi, with no problem. So HELP what is wrong with my Verizon Hotspot??

I don't see that anything is wrong with your Hotspot from the description you posted here.
First of all the network status indicator built by Win7 is not 100% reliable to begin with. MS has a simple algorithm that it uses to check internet resources. When those resources do not respond the status indicator will bounce back and update the user accordingly. You should always perform your own internet check by manually navigating to Google.com or another public website rather than depend on what Win7 is telling you.
Second of all you know your Jetpack was working because your other personal devices were working. This makes me think there was some kind of a temporary glitch that would normally be resolved by rebooting either the Jetpack or your PC.
Finally, Dell does not support VZW devices. When they say the hotspot is not supported they mean Dell does not support VZW products. You may have misinterpreted what was said. Dell is only going to support the Dell PC hardware and very basic Win7 problems such as walking you though the connection process. When something is wrong with the network connection they will always tell you that it is not supported as they have no control over 3rd party vendors. Win7 supports the Jetpack just fine, the Jetpack is a WiFi hotspot just like any other from Win7s perspective.
If you are having more troubles in the future then I suggest starting with a simple reboot of your devices. Post back to us here and let us know if that is the case or not.

How to activate Hotspot shield VPN in my new iphone?

I purchased Hotspot shield VPN for 1 year in my old iphone, which is damaged beyond the repair, I downloaded the the same apps from iTune stores. How do I activate in my new iphone.

See here http://manuals.info.apple.com/en_US/iphone_user_guide.pdf pages 14 and 15.

HT1424 My vpn setting secret how to use i dont know

I want know my vpn setting secre what i will put

Then ask the people that run the VPN. Why do you think anyone here could help you with that?

I tried to purchase hotspot shield vpn but it says contact itunes support to complete the transaction, any ideas how to resolve this !

i tried to purchase hotspot shield vpn but it says contact itunes support to complete the transaction, any ideas how to resolve this ! when i try to contact itunes support it just takes me aroudn in circle to a some page which does not resolve my problem.....

You need to contact support. There is no workaround:
http://www.apple.com/support/itunes/

How to configerd vpn setting

How to configerd vpn setting

I've put up an article on this topic that I hope will help others:
see Setting Up an iOS 7 On-Demand VPN

Newbie-2 Mac Laptops, One AE, One Verizon DSL modem, VPN-Set Up?

I have read through the discussions here before I posted, but since I am new to Airport Express (AE) I may have missed the obvious.
Our household has two Mac laptops. I just purchased AE and am trying to figure out how to hook it up with my Verizon DSL modem.
Can I just use an ethernet cable from the DSL modem to AE? Or do I need some kind of switch?
Will two laptops (with Airport cards) be able to connect to the internet at the same time using AE?
One laptop has a VPN for work. Will there be issues with AE and that set up?
Sorry for the dumb questions.

My question is how do I keep my Power PC connected to the DSL modem and set up the AE? There is only one ethernet port out. Do I need a hub?
No. Since the AirPort Express has only a single Ethernet port it can not connect to a broadband connection AND support a wired (Ethernet) client. Using a hub or switch between the broadband modem and AirPort Express will put the AirPort Express's DHCP server in direct conflict with your ISP's DHCP server. Your ISP won't like that.
Your options are:
Replace the AirPort Express with an AirPort Extreme base station (AEBS), or an inexpensive 802.11b/g compliant base station. In addition to the WAN port, the AEBS provides one LAN port (an inexpensive base station will provide 4 or more) for connection to wired (Ethernet) clients.
Place a wired router between the broadband modem and the AirPort Express. Configure the AirPort Express so that the option to distribute IP addresses is DISABLED.

Personal hotspot unable to set it up

It seems when I go to set up my personal hotspot that it comes up with an error message saying "to enable personal hot spot on this account contact Optus (my server), the iPhone I had before this comes up with my details and it my mums phone, please help!

if you are asking where to find the personal hotspot feature on the phone then this might help
go to SETTINGS/Mobile or cellular/personal hotspot

Verizon Jetpack 4G LTE Mobile Hotspot 890L Help

Hello how are you? I am doing well. I am trying to set up the Verizon Jetpack on my desktop. I am clueless how to do that. I have it on my laptop. I just want it on my destop...
I have windows 7 and HP desktop. I just recently bought the computer. So I don't have no internet on the desktop. And the Jetpack is how I connect to the interenet. As so many others due.. So I really need step by step intructions on how to do this. I know that it can be done. I have emailed verizon but have not heard back from them..
Thanks
Melissa

Bsufan09, I'm doing great and I'm here to fill in the clues for you about setting up your Hotspot. Since the Hotspot is not setup to be used with VZAccess Manager or via USB cable, you would connect wirelessly the same as you do on your laptop. There is no software to install. Does your desktop have a wireless card installed? Normally Windows 7 will show an icon at the bottom right with the signal bars. This is your wireless network connection screen. To connect to a WiFi network, you can tap that icon and search available connections. Here is some more info with screenshots. http://bit.ly/WioTlT
MarquiaF_VZW
Follow us on Twitter @VZWSupport

How can I remove the no used vpn setting in mac?

I install a vpn app and it set something on my MAC. I want to remove the no used setting left like "VIP-US2-L" at left list. But when I choise one item, the remove button at bottom of the list is invalid.
I think there are some files in MAC system files. And I can modify them to do this manual.But I don't no what files they are or how to do this.

This is a guess, but maybe the Manage Virtual Inferface pop-up. I'm guessing as I do not have VPN interfaces, and when I created my own VPN interface, I "Could" remove it using the main [-] button.
Your mileage may vary, and I'm not sure this will do what you want.
You are an admin user, correct? I don't think non-admin users can remove network interfaces.
Do you have System Preferences -> Security -> Advanced -> Require an administrator password to access system-wide preferences set?
Those are all my guesses.

Help with dmz or port forwarding on Verizon Jetpack 4G LTE Mobile Hotspot 890L

I really need help with this I want to play gta v but I have strict nat type on ps4 and everytime I go to the dmz on the ip website it shows the ip and the other side shows add and a dot I click on my ip and click apply but it tells me delete this ip but it also won't even let me delete the ip

You may wish to ask this question over at the Verizon Wireless forums: https://www.verizonwireless.com/community . This community is for DSL and FiOS support, not LTE hotspot support.
Be aware, Verizon Wireless uses Carrier-grade NAT, and your Hotspot also performs NAT. Game consoles do not like being behind Double NAT. Depending on how your hotspot is set up on the back end, you may only be able to achieve Moderate NAT / NAT 2 on the hotspot. If your hotspot has a public Internet IP, you should be able to hit Open NAT.
========
The first to bring me 1Gbps Fiber for $30/m wins!

Hotspot 890l VPN set up

Similar Messages

Maybe you are looking for