Hotspot gone after factory resetting and updating.

After factory resting my iPad 3 the ability to be, use and have the hotspot available to use was gone and not even in the settings menu anymore. How do I get it back?? Can I get it back?? It was updated during the factory reset.

Hello KrAzY1GuTiErRrEz,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Unable to locate a Wi-Fi network
Verify that the network is available by tapping Settings > Wi-Fi and choosing from the available networks.Note: It may take a few seconds for the Wi-Fi network name to appear.
Move closer to your wireless router (access point) and attempt to locate the Wi-Fi network.
If you do not see the network you would like to join, you may be attempting to connect to a hidden network. Learn how to join a hidden network.
Supported Wi-Fi configurations vary by iOS device model. Find out which standards your device supports3.
Reset network settings by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including:
previously connected Wi-Fi networks and passwords
recently used Bluetooth accessories
VPN and APN settings
Best of luck,
Mario

Similar Messages

Time capsule deleted old image after factory reset and setting up a new user

Something strange happened and I can't seem to find anyone else having this question. A friend lent me her macbook air for some time so I backed up her current system to my Time Capsule and "restored" a fresh copy of mavericks in my name, (I deleted everything on the computer). Her backup was safe (I thought) on the time capsule, I checked and it was there.
After I was done transferring some files I needed and setting up this new macbook in my name I was going to set it up to the time capsule as well.
It said that the identity of the backup disk had changed and then after making my new copy of my setup hers disappeared. How come the TC erased it? I suppose I can go Data Rescue 3 on the TC, opening it up, people has said that should work reading on the forum, my question is there another way? Why did it erase the other Macbook air copy? It did not have the same name or anything. It would be so frustrating to have to open it up and recover the data. Has this happened to anyone else?
The TC is 3 gen A1355, 1 TB, I updated the time capsule's firmware to 7.6.1 and I use MacBook Air mid 2011 with OSX 10.9.5 Mavericks,

It cannot have deleted it from what you have told us.. the only way to erase the disk is to click erase in the airport utility or deliberately select and delete the file in finder..
BUT if you use mavericks I suspect you may be seeing how well its networking really functions.. ie hardly at all.
Please use the Pondini method to open the old sparsebundle.. or do it manually.
Start with Q17 and follow the links. http://pondini.org/TM/FAQ.html
You should also see the used space in the TC is a fair bit more than what is used by the MBA and it should show 3 sparsebundles.. your old OS.. the owners version of the OS, and your current version of the OS.. although Mavericks has a nasty habit of messing up the previous ones.
Too late for now.. but you did it the wrong way.. next time use a disk image.. Disk utility can make a full image of the drive.. but it is easier to use bootable clones from Carbon Copy Cloner or Superduper etc. TM is hopeless for restoring a whole install.

IPod Touch 4 has gone wonky even after factory reset!!!

I have an iPod Touch 4. It has the latest o/s (6.1.3, there isn't anything newer available). I am running the latest iTunes. I have a pc with windows 7. Everything was working great up until about a week ago. All of a sudden my ipod crashed and got stuck in a boot loop... I couldn't get it to respond any other way so I did a factory reset and restore. I had massive issues after that -- most of my apps wouldn't sync/install. Very little would work. Basically it's useless. So I did another factory reset and restore. Same problem. Must have done this a dozen times. It takes a long time to do a restore btw and it fails on top of that...
So today I finally did a factory reset and set it up like new instead of doing a restore. I installed only a few apps, not all. It appeared to work ok. I just did a sync and started to install more apps and viola -- funky iPod again... It appears to work, apps open, you can even play or use them. Then randomly it turns screen off, closing the app and appears to reboot (but it doesn't reboot every time)... Things do work on it, I get push notices ok... I had turned off the screen lock thing so I didn't think it should be turning the screen off anymore...
I might add, even during a sync it appears to be doing something -- it beeps, screen goes black, apple logo come up, it comes up again but its super fast so I am not sure if it's rebooting itself or what? The sync just sits there waiting... So it never appears to be dropping the connection...
This is driving me batty!!!!!!!!!!!
I tried doing searches online and it appears I am not alone... Is this some kind of problem with the latest version of itunes?
Is it my ipod going belly up?
I bought this used off amazon about 1 1/2 months ago... Should I contact the seller for replacement?
Suggestions?
If I took it to the apple store I am sure it's not under warranty so I don't think they would help me...
Everyone please chime in cause I would LOVE to use my ipod again! It's not much use to me in this state!!!!!!!

Well my friend, I do appreciate the help!
it looks like it may have been a bad app or multiple bad apps... or maybe even corrupted stored data...
it appears to be working ok now -- i've added about 1/2 my apps back... a lilttle at a time... doing backups before adding anything new each time... and it's ok... there were only a few games I cared about keeping the data for and I was able to pull that data out of some old backups using iBackup Robot... careful to pull ONLY the data for a handful of apps, NOT all the data for everything... I even decided to give up on 2 games and start over again cause I suspect they may have been part of the problem as they have new updates all the time and the updates are usually flawed.. so i just started over on those 2...
so the lesson Illaass to learn here is, before you jump in going on about how it's a bad logic board which it appears NOT to be -- let the discussion I was hoping to have with others and not you (no offense, others who actually have had this problem not someone parroting back what he's read) take place...
and if you see someone posting a similiar problem to mine -- suggest what I did first! cause most of us (including myself) don't have $199 sitting around doing nothing to buy a new ipod with... lol
but i do thank you for trying -- your heart was in the right place!

I lost all apps after reseting and updating to IOS 7.1.1 How do I get them back?

I lost all apps after reseting and updating to IOS 7.1.1 How do I get them back?
I did a reset of my phone yesterday and now when I go to purchaed to download my paurchsed tabs there is nothing there.
I see them in my ipad but they are not in my itunes app section either.
I searched for one in the app store and it usually said "open" or had the cloud icon with the little arrow to downlaod again (free). But none of that shows up at all this time. All the apps that I'm missing show up in the pp store for me to buy again like I never purchased them at all!
What's going on?
I'm missing a ton of apps!
Pleae help me!
Gaby

I just wanted to add this information to my post:
I have purchaed, free and paid, 618 apps.
In my phone apps to add to my phone when I plug it in my computer only 266 apps show up.
In my itunes "puerchased list" only 266 show up.
Thank God I have not updated my ipad. There I went to my "purchased" under the ALL list in the app store and there I do see my 618 apps!
Where did my other 352 apps go? Which many were paid.
I want my apps back.
Thanks,
Gaby

I have ipad mini 2 updated to ios 7.1.2. Now ipad keeps shutting down and rebooting to the apple logo. I factory reset and redownloaded software in recovery mode. Still happening. What else can I do?

I have ipad mini 32gb. I updated to IOS 7.1.2. Since then ipad keeps shutting down and rebooting to the apple logo. It happens so many times I cannot use the ipad. I have tried factory reset and reinstalled software in recovery mode. Ipad is only 1 1/2 years old and in great condition. Is there anything else I can do besides soend $200 to fix it?

Sounds like a hardware issue to me going by the CRC error you mentioned. I'd make a Genius Bar reservation (you'll need your Apple ID) if you have a nearby Apple Store and get it evaluated. The evaluation is free but repair/replacement could incur other charges.
Genius Bar reservations:
https://www.apple.com/retail/geniusbar/

Can't sign in in to iTunes (home sharing) after reset and update apple tv3

can't sign in in to iTunes (home sharing) after reset and update apple tv3

I'm experiencing the exact same thing. Netflix, Youtube and everything else works perfectly, but I'm unable to wirelessly stream anything from my Mac, iPad, or iPhone. All on same wireless channel, all new updates, all have home sharing turned on. Never had a problem the last 2 years.

HT1848 Can anyone help pls...I bought an audiobook on my iPhone. This has now disappeared (after I had to do a factory reset) and I can't figure how to retrieve - either to my laptop or phone, altho it is showing in my iTunes purchases. Tks

Can anyone help pls...I bought an audiobook on my iPhone. This has now disappeared (after I had to do a factory reset) and I can't figure how to retrieve - either to my laptop or phone, altho it is showing in my iTunes purchases. Tks

Audiobooks are currently a one-time only download from the store, so it won't show for re-downloading. If you haven't got a copy of it anywhere (if it's on your computer's iTunes then it should be in the Books part of your library) and it's still in the store then you can try contacting iTunes support and see if they will grant you a re-download : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

No audio, after factory reset,flash install,SoundMax & HDA audio drivers won't install

My problems are:
No sound with Youtube or the laptop itself
SoundMax won't install either though I downloaded HDA audio drivers it requested.
Flash download stuffed up my SoundMax after factory reset.
I decided to do a factory reset after Youtube starting slowing down. After reset it (Youtube) kind of worked better
then the audio disappeared from the laptop. The drivers, SoundMax Audio was gone (greyed out).
I downloaded the Audio driver from Lenovo website for my X31 but SoundMax install wouldn't install because it kept saying HDA Audio drivers weren't installed.
I downloaded it from here:
http://support.lenovo.com/en_AU/research/hints-or-tips/detail.page?&DocID=HT072373
So I went to HP site to download HDA audio drivers, then the SoundMax Audio reappeared and I had sound on my computer.
HDA Audio drivers link at HP website (since Lenovo doesn't have it):
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?cc=US&lang=en&swItem...
When I downloaded latest Adobe Flash, the SoundMax Audio disappeared again. So at the moment I have Youtube video without sound (and Firefox keeps telling me to download Flash?)
No sound on IE as well.
Would appreciate your help. Thank you very much.
I'm using:
ThinkPad X31 (2673-QU6)
Based on 2673-N7G
Win XP Pro Service 3 with recent updates
Firefox (latest) with add-ons
Solved!
Go to Solution.

You need to install the modem driver too.
http://support.lenovo.com/en_AU/research/hints-or-tips/detail.page?&DocID=HT072373
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

PLEASE HELP IPOD NOT WORKING EVEN AFTER FACTORY RESET!!

I am having terrible problems with my ipod mini... it was my sister's earlier and I got it because she gave up on it. I have done everything in my power.. tried the 5'R's, reinstalling itunes, and everything INCLUDING the factory reset, and the same thing is persisting... the exclamation mark with file, and it just says to visit http://www.apple/support/ipod, which i've gone to several times, read everything relavent, and still nothing helped. Please someone help, any thing could work so please, i'd really appreciate it, I look foreward to your opinion!!

iPod Folder with Exclamation Point After Disconnected From Computer
iPod Folder with Exclamation Point After Turned On
Good Thread About iPod Sad icon/Folder with Exclamation Point
I hope this helps!

Blank Screen after factory reset 7911 phone

Hello guys,
I had a weird issue on an 7911 ip phone. It was connected to my network and on the display of the phone was saying "ethernet disconnected".
What i did was a soft and a hard reset using 123456789*0# and then 3497672850*# following the guidelines of a conversation in the forum
https://supportforums.cisco.com/thread/2166581
After the factory reset the device has a blank screen (I left it for more than an hour connected on the network bearing in mind that some processes might be loading in the background and the firmware will load at some point..that didn't happen) and it is unable to receive an ip address ("show ip dhcp bindings", shows nothing related to the mac address of that device).
To eliminate the possibility that the problem might be on the network card of the phone, i've factory reset a working phone using the above described procedure.
I had the same problem with that phone too.
Are there are any log commands that i can use to further investigate my issue? (I can't see any logs using "terminal monitor"command)
I am using call manager express 4.3.0 on a cisco 2800 router.

Dragan,
I tried what you suggested with no luck.
What i noted is that, when i plug the power adapter on the phone and connect the ethernet cable on the switch port of the phone (the other end goes to a d-link small switch) the light on the small d-link switch doesn't come up. However if i plug the ethernet cable on the pc port of the phone the light goes green. I checked it with two phones that i've factory reset and it is the same problem.
What i understood from this, is that the pc is unable to retrieve an ip from the dhcp server and the necessary option 150 to locate the tftp server and retrieve the necessary firmware.
Gordon, due to the above mentioned problem i can't proceed with wireshark since i don't have network connectivity between the phone and my workstation.
Guys, do you have any alternatives that i can give a try?
Thanks a banch!

Cisco 7941G phones will not boot up after factory reset.

Cisco 7941G phones will not boot up after factory reset.
The following happens.
1. Speaker light lit (Green)
2. Phone displays a firmware upgrade page (see attachment) for a few minutes. (Doesn't seems to be upgrading, but it "saids" upgrading)
3. Saw Cisco logo with a Java Powered page.
4. The whole thing loops again and again...
I think the reason why the phone isn't booting up is because the phone needs to know where to find the configuration/firmware files from a tftp server. I do have a TFTP server, but normally I need to go in settings to change the alternative tftp server, but the thing is that now I can't even press the settings button...
Please help.

How many phones were reset and upgrading at one time? What is the setting of the TFTP Maximum Serving Count (Advanced TFTP Service Parm) on each of the TFTP servers?
Sounds like too many devices trying to use TFTP at once.

My iPad 2 camera is not working even after factory reset, what can I do??

Ever since I've had an update for my iPad As I've had this for nearly 2 years now and I have tried everything to fix this camera, including a factory reset and nothing has worked.. Please help me!!

Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
If no joy... Try a Restore...
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
Restoring > http://support.apple.com/kb/HT1414
Make sure you have the Latest Version of iTunes (v11.1.5) Installed on your computer
iTunes free download from www.itunes.com/download

Problems with a new IP phone 7906 after factory reset

Hi Guys
I am currently having problems with my new IP phone 7906 after doing factory reset and here is a video of it:
http://www.youtube.com/watch?v=vvCLtwIAwVw
I used this command I found on the net:
Hold down
while plugging in the phone and keep holding it until the message waiting indicator (red light) starts blinking. Then
release # and type 123456789*0# in sequence.
I was trying to switch my phone to sip and it also dont want to take tftp setup either.

Tim,
Found this on the net
http://www.cisco.com/en/US/ts/fn/620/fn62949.html
Might be woth giving it a go
6.Pull power on the phone (even if power is PoE).
7.Hold down the # key on the phone.
8.Continue holding down the # key and re-apply power.
9.While still holding the # key wait for the Message Waiting Indicator (MWI) light on the handset to start flashing.
10.Once the MWI light is flashing, release the # key and enter the following sequence exactly on the keypad:
3491672850*#
Once this sequence has been entered on the IP Phone, if all the network criteria above have been met, it should begin its recovery process. This process can take up to 15 minutes to finish. The phone may appear to be doing nothing during this time. However, if the phone does not recover after 20 minutes then it is possible that the recovery is stuck. In this case, re-examine your network and verify that steps 1-4 are in place, then re-issue the factory reset sequence.
* Note: The factory reset sequence is a way for a phone to clear flash and still upload to a valid firmware image. This is facilitated by the termxx.default.loads file, but requires that the image files listed in the termxx.default.loads file are available in TFTP for the phone to download. Open the termxx.default.loads file in any text editor. This loads file is essentially just a packing list showing all the OS and application files the phone needs to function. The files include a cnu, cvm, dsp, app and jar files. Please make sure that these files as listed in the termxx.default.loads file are in TFTP. ("xx" will be either "06" for the CP-7906G model, or "11" for the CP-7911G model.)
Additional Diagnostic Steps:
- Try a hard-coded IP address as a test to see if this resolves the upgrade failures. If it does, and the number of failing IP Phones is relatively few, this procedure may be the most expedient. After the IP Phone upgrades successfully, reconfigure the IP Phone to use DHCP.
- Try putting the phone on a hub or a different switch and see if this helps change the startup timing enough so that the upgrade completes successfully.
Regards
Alex

IPad touch screen does not respond even after full restore and update

I have an iPad 2 64 GB
It has for a number of months intermittently stopped responding to any touch screen inputs. This issue began almost as soon as I opened the iPad for the first time. As it was happening very rarely and normally responded eventually, so I thought nothing of it.
This week the iPad will not respond to any touch input at all (Home, On/Off, Volume and Mute buttons still respond). I have tried the hard reset process a number of times and still nothing.
I backed up the device to my machine and applied the latest update 5.1.1 and still no response. I then did a factory reset and still nothing.
I have never dropped or damaged my iPad in any way.
Does anybody know of any ongoing issues with the touch screen or a solution to this problem?

Thank you.
I've already booked myself in to the Genius Bar this week.
I suspect it is a hardware failure and more specifically a loose internal connection.

Possible to retrieve game settings after factory reset

My wife's ipad has apps that are crashing frequently and we went to the apple store to see what we are supposed to do.
They told us the only option for us is to do a factory reset and not restore from a backup (since restoring from the backup previously didn't work).
Basically my wife is worried that if we do the full factory reset and she just redownload all her apps, shes gonna loose her progress in her games (2 of them in particular has weeks worth of time invested).
Is there anyway to retrieve the progress of the games?

None of the games required a sign in option? A lot of games have the player progress saved under the account you signed in. I don't know if that's you case.

Hotspot gone after factory resetting and updating.

Similar Messages

Maybe you are looking for