Hotspot question / problem

My problem is i got all the pictures hotspots and their links to work in browser preview but not in any where else i dont want to upload it as a lay out or anything i just want it uploaded to my photobucket or tinypic etc for my myspace profile so my question is how do i make the links work on photobucket and myspace i know it can be done cuz i seen uploaded clickable pictures in photobucket on profiles

A .swf file is a Flash file. A Flash files is not simply an image and can contain active code, such as monitoring mouse position and launching a Web page when the mouse is clicked within a certain area. That's what you need to create, then.
If you have Flash, and know how to use it, then that's your better choice. Fireworks can export graphics and animations in Flash format, but I don't know if it will maintain the linking action. I guess it's worth a try. Open Help in the program, search for flash and read, "Exporting Fireworks graphics and animations as SWF files."
If that doesn't work, and you know you can produce the result you want from Photoshop, then maybe the better option would be to figure out how to do it again.

Similar Messages

Hi team , I have some questions/Problem for my product apple (iPad,iPhone) , I want to employee speak and type thai language

Hi team , I have some questions/Problem for my product apple (iPad,) , I want to employee that can speak or response me in thai language
1. ผม อาคเนย์ พำนักอยู่ประเทศไทย กรุงเทพฯ มีปัญหาสอบถาม ดังต่อไปนี้
- กระผมได้ทำการตัดบัตร เครดิต เพื่อซื้อเกมส์ผ่าน itune store ผ่าน apple itune ID : misskor.yaprom@*** เพื่อซื้อเกมส์ Eleves Realm ในวันที่18 ก.ค. 56 เวลา 17.07น. ซึ่งทางบัตรเครดิตได้แจ้งเรียกเก็บเงินมายอดเงิน 39.99$ ซึ่งในระบบจริงๆ ทางกระผมต้องการตัดในยอด 99.99$ แต่พอได้ประสานงานไปยังธนาคาร ได้รับการแจ้งกลับมาว่า ได้ทำการตัดบัตรในยอดเงิน 39.99$ ซึ่งในความเป็นจริงนั้น กระผมไม่ได้สั่งซื้อเกมส์ในยอด 39.99$ ซึ่งในยอด 99.99$ นั้นพยายามตัดในระบบบัตรเครดิตอยู่ แต่ทางกระผมได้ยืนยันกลับไปว่าไม่ให้ระบบตัดนะครับ เพราะว่าเนื่องจากมีปัญหาในการชำระเงินระหว่าง Apple itune store อยู่
- ทั้งนี้ขอให้ทางเจ้าหน้าที่ประสานงานตรวจสอบ apple itune ID : misskor.yaprom@*** เพื่อซื้อเกมส์ Eleves Realm ตามที่ได้ให้รายละเอียดโดยด่วนว่าเป็นเพราะว่าระบบมีปัญหาหรือว่ามีอะไรเกิดขึ้นในข ั้นตอนการชำระเงินครับ
รบกวนประสานงานกลับมายังกระผม อาคเนย์ ที่หมายเลขโทรศัพท์มือถือ +**** / reply feedback email : lekod1@*** โดยด่วน ในวันศุกร์ที่ 19 ก.ค. 2556 ครับ
ขอบคุณครับ
อาคเนย์ อุดปิน
กด
<Edited By Host>

Google translation:
พนักงานของ iTunes Store จะไม่ได้อ่านข้อความในเว็บบอร์ดนี้ ถ้าคุณต้องการความช่วยเหลือสำหรับปัญหาที่มีใน iTunes Store, คุณจะต้องติดต่อกับพวกเขาผ่านทางแบบฟอร์มเว็บนี้:
http://www.apple.com/emea/support/itunes/contact.html

Question / problems with the Toshiba TV 40TL938 (40TL938F)

Hi everybody,
I bought the Toshiba TV 40TL938 french version ( 40TL938F ), in an online store.
I have a few question / problem, and i hope you could help me.
- when i play MKV vido files via USB, integrated subtitles works well but for me they are too small, too thin and too white. Can i make them biger, larger and with a black shadow around it ? if yes, how could i do this ?
- when i play MKV vido files via DLNA (with XBMC), there is no subtitles anymore. Whose fault is it ? my TV ? XBMC ? do you how i can fix this ?
- does anybody know if DTS will be supported sooner or later on 2012 toshiba TV models such as my 40TL938
Thank you very much by advance for your help !
Backslash
French user of a beautiful Full HD 3D 40 inches toshiba LED TV :)

> {quote:title=TomDexter wrote:}{quote}
> > when i play MKV vido files via USB, integrated subtitles works well but for me they are too small, too thin and too white. Can i make them biger, larger and with a black shadow around it ? if yes, how could i do this ?
>
> User manual page 76:
> http://www.toshiba-om.net/LCD/PDF/English/TL938-4046-English.pdf
> You will need to check the option: +Subtitle Type+
Hi !
Thank you for your answer,
I saw this but there is no way to change the subtitle setting.
In "subtitle type" the only thing i can do is to swich from "normal" to "deaf and hearing impaired" ("sourd et malentendant" in french).
So i guess i will have to get used to it
Anyway, thank you for your help !
> {quote:title=donhe7 wrote:}{quote}
> BACKSLASH ASKS " does anybody know if DTS will be supported sooner or later on 2012 toshiba TV models such as my 40TL938?"
>
> Please excuse my ignorance, but what is "DTS"???
>
> donhe7
DTS is an audio format, such as AC3 or mp4. This TV doesn't support DTS, so when i play movie (such as MKV file) with audio in DTS, there is no sound (but the video is ok).

Smartform as Button in Hotspot Question - Captivate 8

If I add a Smartform as Button to an Hotspot Question, the Button seems to have no function.
The Button is not in the Hotspotarea, it is outside.
I created several Buttons with different actions attached to it but nothing works.

Shape buttons can be used on most question slides, but not on Hotspot Questions. My suspicion is that because Hotspot needs clicks in places, that the whole slide is reserved for possible clickable hotspots. And because Question slide objects are always on top of any other object, the shape button can not function. Even if you limit clicks only on Hotspots. Sorry, nothing for question slides has changed in CP8, was the same in CP7.

Noob Question: Problem with Persistence in First Entity Bean

Hey folks,
I have started with EJB3 just recently. After reading several books on the topic I finally started programming myself. I wanted to develop a little application for getting a feeling of the technology. So what I did is to create a AppClient, which calls a Stateless Session Bean. This Stateless Bean then adds an Entity to the Database. For doing this I use Netbeans 6.5 and the integrated glassfish. The problem I am facing is, that the mapping somehow doesnt work, but I have no clue why it doesn't work. I just get an EJBException.
I would be very thankfull if you guys could help me out of this. And don't forget this is my first ejb project - i might need a very detailed answer ... I know - noobs can be a real ....
So here is the code of the application. I have a few methods to do some extra work there, you can ignore them, there are of no use at the moment. All that is really implemented is testConnection() and testAddCompany(). The testconnection() Methode works pretty fine, but when it comes to the testAddCompany I get into problems.
Edit:As I found out just now, there is the possibility of Netbeans to add a Facade pattern to an Entity bean. If I use this, everythings fine and it works out to be perfect, however I am still curious, why the approach without the given classes by netbeans it doesn't work.
public class Main {
    private EntryRemote entryPoint = null;
    public static void main(String[] args) throws NamingException {
        Main main = new Main();
        main.runApplication();
    private void runApplication()throws NamingException{
        this.getContext();
        this.testConnection();
        this.testAddCompany();
        this.testAddShipmentAddress(1);
        this.testAddBillingAddress(1);
        this.testAddEmployee(1);
        this.addBankAccount(1);
    private void getContext() throws NamingException{
        InitialContext ctx = new InitialContext();
        this.entryPoint = (EntryRemote) ctx.lookup("Entry#ejb.EntryRemote");
    private void testConnection()
        System.err.println("Can Bean Entry be reached: " + entryPoint.isAlive());
    private void testAddCompany(){
        Company company = new Company();
        company.setName("JavaFreaks");
        entryPoint.addCompany(company);
        System.err.println("JavaFreaks has been placed in the db");
    }Here is the Stateless Session Bean. I added the PersistenceContext, and its also mapped in the persistence.xml file, however here the trouble starts.
import javax.ejb.Stateless;
import javax.persistence.EntityManager;
import javax.persistence.PersistenceContext;
@Stateless(mappedName="Entry")
public class EntryBean implements EntryRemote {
    @PersistenceContext(unitName="PersistenceUnit") private EntityManager manager;
    public boolean isAlive() {
        return true;
    public boolean addCompany(Company company) {
        manager.persist(company);
        return true;
    public boolean addShipmentAddress(long companyId) {
        return false;
    public boolean addBillingAddress(long companyId) {
        return false;
    public boolean addEmployee(long companyId) {
        return false;
    public boolean addBankAccount(long companyId) {
        return false;
}That you guys and gals will have a complete overview of whats really going on, here is the Entity as well.
package ejb;
import java.io.Serializable;
import javax.persistence.*;
@Entity
@Table(name="COMPANY")
public class Company implements Serializable {
    private static final long serialVersionUID = 1L;
    @Id
    @GeneratedValue(strategy = GenerationType.AUTO)
    private Long id;
    @Column(name="COMPANY_NAME")
    private String name;
    public Long getId() {
        return id;
    public void setId(Long id) {
        this.id = id;
   public String getName() {
        return name;
    public void setName(String name) {
        this.name = name;
        System.err.println("SUCCESS: CompanyName SET");
    @Override
    public int hashCode() {
        int hash = 0;
        hash += (id != null ? id.hashCode() : 0);
        return hash;
    @Override
    public boolean equals(Object object) {
        // TODO: Warning - this method won't work in the case the id fields are not set
        if (!(object instanceof Company)) {
            return false;
        Company other = (Company) object;
        if ((this.id == null && other.id != null) || (this.id != null && !this.id.equals(other.id))) {
            return false;
        return true;
    @Override
    public String toString() {
        return "ejb.Company[id=" + id + "]";
}And the persistence.xml file
<?xml version="1.0" encoding="UTF-8"?>
<persistence version="1.0" xmlns="http://java.sun.com/xml/ns/persistence" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/persistence http://java.sun.com/xml/ns/persistence/persistence_1_0.xsd">
<persistence-unit name="PersistenceUnit" transaction-type="JTA">
    <provider>oracle.toplink.essentials.PersistenceProvider</provider>
    <jta-data-source>jdbc/sample</jta-data-source>
    <exclude-unlisted-classes>false</exclude-unlisted-classes>
    <properties>
      <property name="toplink.ddl-generation" value="create-tables"/>
    </properties>
</persistence-unit>
</persistence>And this is the error message
08.06.2009 10:30:46 com.sun.enterprise.appclient.MainWithModuleSupport <init>
WARNUNG: ACC003: Ausnahmefehler bei Anwendung.
javax.ejb.EJBException: nested exception is: java.rmi.ServerException: RemoteException occurred in server thread; nested exception is:
        java.rmi.RemoteException: Transaction aborted; nested exception is: javax.transaction.RollbackException: Transaktion für Zurücksetzung markiert.; nested exception is:
        javax.transaction.RollbackException: Transaktion für Zurücksetzung markiert.
java.rmi.ServerException: RemoteException occurred in server thread; nested exception is:
        java.rmi.RemoteException: Transaction aborted; nested exception is: javax.transaction.RollbackException: Transaktion für Zurücksetzung markiert.; nested exception is:
        javax.transaction.RollbackException: Transaktion für Zurücksetzung markiert.
        at com.sun.corba.ee.impl.javax.rmi.CORBA.Util.mapSystemException(Util.java:243)
        at com.sun.corba.ee.impl.presentation.rmi.StubInvocationHandlerImpl.privateInvoke(StubInvocationHandlerImpl.java:205)
        at com.sun.corba.ee.impl.presentation.rmi.StubInvocationHandlerImpl.invoke(StubInvocationHandlerImpl.java:152)
        at com.sun.corba.ee.impl.presentation.rmi.bcel.BCELStubBase.invoke(BCELStubBase.java:225)
        at ejb.__EntryRemote_Remote_DynamicStub.addCompany(ejb/__EntryRemote_Remote_DynamicStub.java)I spend half the night figuring out whats wrong, however I couldnt find any solution.
If you have any idea pls let me know
Best regards and happy coding
Taggert
Edited by: Taggert_77 on Jun 8, 2009 2:27 PM

Well I don't understand this. If Netbeans created a Stateless Session Bean as a facade then it works -and it is implemented as a CMP, not as a BMP as you suggested.
I defenitely will try you suggestion, just for curiosity and to learn the technology, however I dont have see why BMP will work and CMP won't.
I also don't see why a stateless bean can not be a CMP. As far as I read it should not matter. Also on the link you sent me, I can't see anything related to that.
Maybe you can help me answering these questions.
I hope the above lines don't sound harsh. I really appreciate your input.
Best regards
Taggert

Question/Problem Sharing iTunes Library between multiple users

Hello all,
I have a question (potential problem) regarding sharing an iTunes Library between multiple users.
In the past, I had placed the iTunes folder in /Users/Shared, and created an alias to it in the "Music" folder of each user, and it worked fine. However, with a recent upgrade to Mac OS 10.5, only the Home user account can access the library.
I read the Apple Support Document http://support.apple.com/kb/ht1203 uner Mac OS X which specifically states *not* to move the iTunes folder, just the iTunes Media folder (which I don't have, would that be iTunes Music?).
Any recommendations? Should I delete the different alias, move the iTunes folder back to the home user, and then follow the instructions in the support document?
We're also looking to sync music purchsed on our iPod touches, as well as apps (which weren't supported in our privous Mac OS X version.
Any advice is appreiciated.

David Guay wrote:
... iTunes Media folder (which I don't have, would that be iTunes Music?).
yes.
specifically states *not* to move the iTunes folder
*do* keep the entire iTunes folder in /users/shared, however, instead of creating aliases, launch iTunes while holding the option (⌥) key, click choose library when prompted, and select the iTunes folder in /users/shared.
obviously, only one iTunes at a time can access the library !

Some reason my apps cannot download in my mac security question problem

securty questionn of apple id problem i tried my apple id method also but did`t work

I strongly recommend that you use a password for each login account but primarily for your admin account which will also be required when installing any software that uses an installer and/or for something being installed to the root directory of the hard drive such as a virus would likely require. If you are ever prompted for your admin password out of the blue to install anything without purposely trying to install anything, you should always decline which not having an admin password negates.
Many single users of a Mac have an admin account (obviously and required) but create a login account without admin privileges for every day use as added security.
Besides turning on the built-in Firewall, do not enable any services/ports that you don't need or regularly use and select all options via the Advanced button under the Firewall tab.

Z 10 hotspot connection problems

I am with Rogers and have a Z10 with OS version10.2.1.2141
Didn't know about the Tethering or Mobile Hotspot until a fiend told me and we both tried to start them up and for some reason both services presently say "Cannot start Mobile Hotspot due to a temporary network problem. Please try again later" same for tethering but I have been trying for over a week now and no results. Any suggestions or recommendations?

i get that error when the signal is too low on 4g butafter a few times it will connect
Also is this feature enabled on your account? I had to pay to use this feature and some times even if included you have to call to enable it
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

Startup disk question/problem

Should the startup disk always be at the top of the list of disks upon startup? Or is it now the case, with 10.5 on a MacBook, that the internal disk is at the top of the list whether or not it is the startup disk?
Situation: New MacBook Mac OS 10.5.8, new Western Digital Scorpio Blue WD3200BEVT 320GB 5400 RPM 8MB Cache 2.5" SATA 3.0Gb/s Internal Notebook Hard Drive in an external MacAlly SATA FW/USB case. I erased (formated) the external drive, and, using Restore in Disk Utility, made what I expected to be a clone of the MacBook's internal drive.
Problem: After repairing permissions, using Start Up Disk preferences I selected the new drive as the start up drive. Upon restart I get mixed signals as to which is the startup drive. The original (internal) drive is at the top of the list on the right of desktop but, in the Start Up Disk Preferences list, the new drive is highlighted. (Further: I am able, after right clicking on the internal disk, to select it, to eject it.)
Questions: Have I bought a drive that won't work as a start up drive or doesn't Disk Utility Restore in 10.5.8 create a bootable drive as in 10.4 or does the internal disk always show up at the top of the list on the desktop in 10.5.8? When I swap the drives, putting the new drive in the MacBook, will it boot?
This procedure for swapping new drives has always worked with my Macs thru Mac OS 10.4.11.

Check with Western Digital (the FAQs on their website) whether that hard drive is bootable on your Mac. Not all of them are.
Quote from a Western Digital FAQ:
While it may be possible to boot your computer to an external hard drive, Western Digital does not provide technical support for booting your computer using an external hard drive. If you intend to make a copy of your boot drive, or install your operating system, please use a second internal drive (EIDE or Serial ATA), rather than an external drive.
And their list of bootable drives:
The following external hard drives are bootable on Intel-based Macintosh computers systems through USB:
• My Book Essential Edition
• My Book Essential Edition 2.0
• My Book Home Edition
• My Book Mirror Edition
• My Book Office Edition
• My Book Premium Edition
• My Book Premium Edition II
• My Book Premium ES Edition
• My Book Pro Edition
• My Book Pro Edition II
• My Book Studio Edition
• My Book Studio Edition II
• My Passport Studio
The following external hard drives are bootable on Intel-based Macintosh computers systems through FireWire (1394a/b):
• My Book Home Edition
• My Book Mirror Edition
• My Book Office Edition
• My Book Premium Edition
• My Book Premium Edition II
• My Book Pro Edition
• My Book Pro Edition II
• My Book Studio Edition
• My Book Studio Edition II
• My Passport Studio
The following external hard drives are bootable on Power PC based Macintosh computers systems through FireWire (1394a/b):
• WD My Book Premium Edition
• WD My Book Pro Edition
The following external hard drives are not bootable on Power PC based Macintosh computers systems through USB/FireWire 1394(a/b):
• My Book Essential Edition
• My Book Essential Edition 2.0
• My Book Home Edition
• My Book Mirror Edition
• My Book Office Edition
• My Book Premium Edition II
• My Book Pro Edition II
• My Book Studio Edition
• My Book Studio Edition II
• My Passport Studio
• My Passport Elite
• My Passport Essential
• WD Passport
• WD Passport (Silver)
You will find a more up to date list on their website.

Question/Problem with BAPI_ACC_DOCUMENT_POST in TAXACCOUNT with TAX_CODE

Hi all:
I've got a problem when I use bapi BAPI_ACC_DOCUMENT_POST.
The vendor accounts with general leader accounts associated are implemented in the position of table ACCOUNTPAYABLE and the general leader accounts go to table GLACCOUNT.
Refering to positions with vendor number I introduce the Special G/L Indicator and after this i execute bapi.
It is said I have to put the TAX_CODE in tabla TAXACCOUNT and the field AMT_BASE in table CURRENCYAMOUNT.
But when I use transaction FB01 to cread fi documents in vendor positions I don't
have obligation to introduce the TAX_CODE and afterwards I look for the document in table bseg. I can watch the field MWSKZ is blank.
Another question : I think I can find the amt_base in currency amount with the function: CALCULATE_TAX_FROM_NET_AMOUNT
Thanks a lot. Points in advance.

I've resolved the question.
It depends of the special gl indicator. If it is 8 or H it doesn't need to be introduced the table taxaccount.

Image Hotspot Coord Problems

Hello,
I am always running into problems and the recent of which is the image hotspot Coord, I have set up an image to change it's size to fit the screen and the image needs hotspots to link it up to the sites:
When I view the site in a broweser the coord of the hotspots do not change to match the new image size. Have a look here: http://dl.dropbox.com/u/49665279/index.html
Code:
<title>Saber Rider - Index</title>
<style type="text/css">
body p {
          text-align: left;
#wrapper {
          position:absolute;
          width:100%;
          height:100%;
          z-index:1;
          left: 0;
          top: 0;
</style>
</head>
<body>
<div id="wrapper">
<table width="100%" cellpadding="0" cellspacing="0">
    <tr>
      <td width="200"><img src="Images/webpage_BG_left.jpg" width="200" height="1200" /></td>
      <td width="100%"><img src="Images/webpage_header.jpg" width="100%" height="180" /><img src="Images/webpage_content.jpg" width="100%" height="690" border="0" usemap="#Map" />
      <img src="Images/webpage_footer.jpg" width="100%" height="330" /></td>
      <td width="200"><img src="Images/webpage_BG_right.jpg" width="200" height="1200" /></td>
    </tr>
</table>
</div>
<map name="Map" id="Map"><area shape="rect" coords="547,60,576,97" href="#" /><area shape="rect" coords="575,60,604,97" href="#" /><area shape="rect" coords="720,60,749,96" href="#" /><area shape="rect" coords="692,60,719,98" href="#" /><area shape="rect" coords="662,60,693,98" href="#" /><area shape="rect" coords="632,60,663,98" href="#" /><area shape="rect" coords="604,60,633,97" href="http://www.youtube.com" />
<area shape="rect" coords="719,60,750,98" href="#" />
</map>
</body>
</html>

Must be a very OLD article then. Image maps for navigation were common in the late 90's as were FRAMES and framesets. Nobody builds web sites this way anymore.
Frames are Evil
http://apptools.com/rants/framesevil.php
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/

CFINSERT - Question Problem

Have a set of questions in which a person answers...
It works fine looping thru the questions... And inserting...
Problem occurs - when I want them to go back and answer the ones that were 'No'...
So it might only be 3 questions instead of 10...
So that is where my loop errors...
As it is based on a Question ID
Yes<br><cfinput type="Radio" name="answer_2" value="Yes" required="yes">
Yes<br><cfinput type="Radio" name="answer_4" value="Yes" required="yes">
Yes<br><cfinput type="Radio" name="answer_5" value="Yes" required="yes">
An example of what is being sent above...
So 2, 4, 5 are the questions...
My loop goes through 3 of them which is fine...
But mismatches - thinking it should be 1,2,3 etc..
Yes<br><cfinput type="Radio" name="answer_1" value="Yes" required="yes">
Yes<br><cfinput type="Radio" name="answer_2" value="Yes" required="yes">
Yes<br><cfinput type="Radio" name="answer_3" value="Yes" required="yes">
So not sure what to do to code it as looping through the actual answer numbers...
Some code below...
<cfloop from="1" to="#q#" index="n">   ---> q is a record count of wrong answers
<cfoutput>

<cfset newqid = "#variables.n#"> #newqid# (test output)
<cfset newanswer = "answer_"&#variables.n#> #newanswer# (test output)
<cfset newnotes1 = "notes1_"&#variables.n#> #newnotes1# (test output)
<cfset newnotes2 = "notes2_"&#variables.n#> #newnotes2# (test output)
<cfset newcnote = "compliancenote_"&#variables.n#> #newcnote#(test output)
<br>

<cfset qid = "#Evaluate(variables.newqid)#"> #qid# (test output)
<cfset answer = "#Evaluate(variables.newanswer)#"> #answer#
<cfset notes1 = "#Evaluate(variables.newnotes1)#"> #notes1#
<cfset notes2 = "#Evaluate(variables.newnotes2)#"> #notes2#
<cfset compliancenote = "#Evaluate(variables.newcnote)#"> #compliancenote#
<cfset inspid = "#Evaluate(inspid)#"> #inspid#
<cfset busid = "#Evaluate(busid)#"> #busid#
<cfquery name="insert" datasource="fpb">
        INSERT INTO answer (qid, answer, inspid, busid, notes1, notes2, compliancenote)
        VALUES (#qid#, '#answer#', #inspid#, #busid#, '#notes1#', '#notes2#', '#compliancenote#');
</cfquery>
</cfoutput>
</cfloop>
This all works fine when just inserting fresh from start say 10 questions...
Which can be yes no etc...
Thanx for any help...
Merle

Damn...
It is late at night... Rum and EggNog...
I can't seem to set this output...
This works...
<cfoutput query="reinspect">
#qid#,
</cfoutput>
Goes ---> 2,5,8,9, (example - comma is stuck on end)
My problem is probably below...
<cfset numbers = "
<cfoutput query="reinspect">
#qid#,
</cfoutput> ">

Question: Problem with Final Cut & DVCAM connection...

Every once in a while for some reason I can't see my timeline on my monitor. I have it hooked up through firewire from my computer to my DVCAM and then from the DVCAM to the monitor. The only time it will play on the monitor is if I'm Printing to Video. It just stopped working for no apparent reason.
I tried replacing the firewire...I tried unplugging and restarting the DVCAM and restarting the computer. I'm just wondering if there is a setting that i'm missing that I may have accidentally switched. (Highly doubt it). It's also happening to a co-worker of mine.
Anyone else ever had this problem or know of a possible solution??
BCTVMax

First, I don't think it will help you or anyone else to post the same question twice within a minute.
View menu, at the bottom, check all the external video settings. Maybe follow up under the other post?

Jumpstart questions/problems

OK fellas - hopefully this is an easy one for ya...
I have a jumpstart server successfully set up using 12/02 release of Solaris 9...I want to be able to boot net - install and come back in an hour or so and be looking at the console login prompt.
My jumpstart process works perfectly save for one small issue...I do not know how to automate the "autoshutdown" question and "reminder" question prior to the last reboot (hopefully everyone knows the questions I am referring to). I have a finish script that works to a tee as well....if I can get this one problem resolved, I will have my environment complete.
Thanks in advance for your replies....JH

In your finish script add this line:
touch /noautoshutdown

RollingFileAppender/Log4J question (problem with reading logging)

Hi everyone,
I've got a question about log4j.
I'm working with an application that generates a lot of logging. When I'm trying to figure out problems in the application it's hard to read the log files because they get updated/overwritten all the time.
The mechanism of the RollingFileAppender of log4j is that when the maximum file size is reached a new log file is created with <filename>.1 and the name of every file that already existed is increased with 1.
So when I try to read my logfiles they get overwritten while I'm reading it because the application generates a new logfile sometimes 4 times per minute. That's very annoying, so what I would like to have is that everytime a new logfile is created it's number is increased with 1 until a maximum of files and then start over.
I've been trying to find this mechanism somewhere but can't find it. The DailyRollingFileAppender kinda does what I want but you can't set a maximum of files and I can't have that because of the space available on the server.
Does anyone know how to solve this?

I've got a question about log4j.
I'm working with an application that generates a lot
of logging. When I'm trying to figure out problems in
the application it's hard to read the log files
because they get updated/overwritten all the time.
The mechanism of the RollingFileAppender of log4j is
that when the maximum file size is reached a new log
file is created with <filename>.1 and the name of
every file that already existed is increased with 1.
So when I try to read my logfiles they get
overwritten while I'm reading it because the
e application generates a new logfile sometimes 4
times per minute. That's very annoying, so what I
would like to have is that everytime a new logfile is
created it's number is increased with 1 until a
maximum of files and then start over.That's not Log4J's problem. That's your problem for treating log files like production data. Maybe you need to use something else, like writing this supposedly persistent data to a database.
I've been trying to find this mechanism somewhere but
can't find it. The DailyRollingFileAppender kinda
does what I want but you can't set a maximum of files
and I can't have that because of the space available
on the server.What stops you from introducing another periodic process, to purge old log files? That's what most would do.

Hotspot question / problem

Similar Messages

Maybe you are looking for