Hotspots created in Framemaker 11 don't work when generating the PDF

I'm trying to create several hotpots on an image that go to specific locations in a table. I have no problem creating them in Framemaker 11 and the links work fine when I test them using CTL+ALT and the mouse pointer. When I generate the PDF, however, the images has no hotspots and when I click on the image, nothing happens.
Some other information:
I'm using Framemaker 11 on Windows 8.
The image was originally a .png, but I tried it with other image formats and still the same result.
Is there a setting I need to change when I generate the PDF?

I primarily use Save As PDF, and I'm not having problems with any of my other links. I tried printing to the AdobePDF printer, but I get the following error: When you create a PostScript file you must rely on system fonts and use document fonts. Please go to the printer properties, "Adobe PDF Settings" page and turn OFF the option "Rely on system fonts only; do not use document fonts.
I unselected this option, but I'm still getting this error message. Perhaps I need to close Framemaker and open it again? I'm not sure if this has anything to do with the PDF not being able to generate hotspots, though.

Similar Messages

Hyperlinks in Excel not working when doing the PDF Convert

I have worked on this and worked on this. Now I am at a point where I need assistance as I am stumped. I have about 20 different facilities that have financial statements that need to be published in Adobe as a PDF format and when I go through the steps to convert everything looks good, except the links are not working. We have about 62-74 pages that will be exported and due to the departments and such we need the links to work.
This is through Excel-
I select the worksheets I want to convert then after it is done I open the PDF and the links are not working. To set them up manually in Adobe is too labor intensive -- any ideas on how to get this to work?
Thanks in advance for any assistance you can provide me.

I am on the X version.
I am using the PDFMaker
Using either 2003 or 2010 Excel version
Click on making bookmarks and links
I can send an attachment, please beware that is it financial information that cannot be published-also the hyperlinks are setup in Excel as well.
Not sure how to upload the worksheet and would prefer to send via email if at all possible.
ANY HELP is GREATLY Appreciated :-)
Thank you and have a great day!

Hyperlinks that I create in InDesign CS3 don't work in the PDF

I've created several hyperlinks in an InDesign CS3 file, using the Hyperlinks panel. But when I export to PDF format, the hyperlinks don't work. Even the ones that start with http:// or www. don't work. Is that just the way it is? Or am I doing something wrong?
Thanks,
Ellen

Is there a button? I don't see anything saying "Hyperlinks" in the Export dialog box. I've attached an image of what I'm seeing.
Thanks

Itunes stops working when accessing the store what needs to be done to get it working again?

itune stops working when accessing the store. What needs to be done to get it working again?

Hey Baitmaster61!
Here is an article that will help you troubleshoot this issue:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
If you are still experiencing issues with reaching the iTunes Store, you may also need to reference this article:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Take care, and thanks for visiting the Apple Support Communities.
Cheers,
Braden

[Windows] Captive runtime bundle package certificate signing don't work when icons included

Here is the bugbase ticked: Bug#3949990 - [Windows] Captive runtime bundle package certificate signing don't work when icons included
Application signing don't work when you build captive runtime bundle package which include icons. Don't matter application icons or associated file types icons. It works fine when you build application bundle without icons.
It's a very critical issue, please fix it ASAP.
Also application signing don't work if you using AIR SDK beta: Bug#3950022 - [Windows] Application signing don't work with AIR SDK beta
I'd like to ask everyone affected by this issue to take a minute and vote for the following bugs.
Thanks.

I received feedback from our QA team this morning that they were able to reproduce the bugs but they are requesting access to the .as code if possible. If you'd like to keep this private, please feel free to email it to me directly at [email protected]

My links don't work when I combine another file with the pdf

My internal bookmarked links don't work when I combine another file with the pdf.
The external links continue to work fine, though.
This doesn't make any sense to me at all ... but I'm hoping one of you kind folk can help?

I opened my file and instead of merging files I used insert pages and inserted all of the pages from the file I wanted. Then I saved the file with
the same name. Attached is a rough draft of some helpful hints I put together. This has been a very painful process for us to discover how to handle
this and there really is not much help from Adobe.
Instead of merging files you inset pages. In Acrobat select Document - Insert pages -From file. You can select all pages or some and where you want them inserted. After you do that save the file not save as and all of your links should work. If you combine files or merge files all of the links will break.
                                                                                GillHarley <[email protected]>
05/07/2009 09:54 AM                                                                                To
                                                                    "Christine Salmon" <[email protected]>
cc
                            Please respond to
[email protected]                                                                                 Subject
                                dobe.com                            Acrobat Windows My links don't work when I combine another file with the pdf
                                                                    29k833-1Kp0-8ahk
I think it's something to do with naming, but I can't figure out what. This is because it asks to be saved and gives me a Binder no as the name. If I
press Cancel at that point, I keep the file and the links. But as soon as I need to close it, it asks me again 'Do you want to save this file' and if
I say 'Yes', I lose all the links, and if yet if I say 'No', I lose the whole file. So at some point it has to be saved but whether I keep the Binder
no name when I save it, or use the original name, it makes no difference ... it is in the saving of it that it looks the functionality, and yet, if I
don't save it, I lose the file.
This makes no sense to me....I hope it does to one of you.
For instance, Christine, how did you keep your file if you couldn't save it?
Or have I misunderstood?

In my Ameritrade account the sub-header titles don't work when selected.

In my Ameritrade account the sub-header titles don't work when selected. Is it maybe an add on or the beta version 14.01a of firefox or something else?
I can't give the address as it is a confidential site, sorry. But for example when you pick trade and try to select buy or sell tab it does nothing. I tried downloading the lastest beta version 14.01a which I like to use but this didn't help? Thank you.

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Shortcut keys NOT working when publish to PDF full screen

We have a series of modules that are published to pdf and the animations run inside the pdf file. We use the Tab shortcut key quite a bit as it simulates the natural progression between form items.
This works fine when viewing the pdf in standard mode. But when you right click on the PDF and go full screen, the Tab key fails to work. It wants to place emphasis on the playback controller.
Has anyone experienced this issue, and do you know the workaround?

If the PDF's page content is not renderable text (e.g., the scanned image/picuture of characters or outlined fonts (which are graphics (a "picuture")) then there is nothing for the Highlight Comment tool to work with.
So - two trials.
Acrobat's Preferences set to permit "U" to make use of the Underline tool.
Each trial done in Full screen.
#1 = a PDF with scanned stuff. Press "U". Tool is available but unable to highlight anything.
#2 = a PDF with renderable stuff. Press "U". Tool is available & can place highlight over selected characters.
Be well...

I have created a PDF and password protected it for view. However, when reading the PDF in Adobe Reader app on the iPad the commenting and annotation options are not available. Is there a way to allow commenting and annotation in the app while password pro

I have created a PDF and password protected it for view. However, when reading the PDF in Adobe Reader app on the iPad the commenting and annotation options are not available. Is there a way to allow commenting and annotation in the app while password protecting the document?

Is there a setting that needs to be set to allow the annotation features? I set password protection to open and then password for editing and set it to Any except page extraction, but it still did not give the annotation option

HT1947 The gyro no longer works when using the remote app on my iPad. I updated to iOS 7.0.1. This seem to happen after the update. Any suggestions?

The gyro no longer works when using the remote app on my iPad. I updated to iOS 7.0.1.
This seem to happen after the update. Any suggestions?

Dear Apple friends,
I have the exact same problem with some apps.
Even when I try some websites in Safari and Chrome that require loading big chunks of data they crash.
Today it crashed in two new places. In the notification center and when I opened newstand app I no longer was able to return to the main window and the dock disappeared.
I have my ipad retina for about three months now but latelly this issue has became more frequent. What should I do?
Should I update to the latest firmware and do what raymond73 said?
Is there a fix for this issue?
Has Apple said anything about this? Because I see that this issue is happening to a lot of people.
Is it possible to downgrade to iOS 6?
Is it a firmware problem? That can be fixed in future releases? Or an hardware issue?
Should I wait or go to the place I bought it and try to get the money back?

The "portable document format" icon is a Word 2010 icon, so selecting Adobe Reader as action does not work to display the PDF.

In the Applications tab -- Content Type -- the "portable document format" icon is a Word 2010 icon (not Adobe), so selecting Adobe Reader or preview in Firefox as action does not work to display the PDF. I can see this Applications difference because my other Firefox laptop has the Adobe icon, and I can view PDFs. Essentially, a PDF is coming in as a Word document -- and the computer tries to open it up as a Word file.
How do I get the correct PDF icon in the Applications list -- the same way it displays (and works) on my other laptop.

Adobe PDF Plug-In For Firefox and Netscape 10.1.7 ?
I think you need to add this to the list of applications and the action to take on the type of content. This can also be managed in the about:permissions page. [[Permissions Manager - Give certain websites the ability to store passwords, set cookies and more]]

Finder not working, when click the infinity sigh comes, can't open any file

finder not working, when click the infinity sigh comes, can't open any file?

That could be an indication your drive is failing. If you do not have a current Backup, that is top priority.

Will a DVI to HDMI adaptor work when connecting the ipad2 to a projector?

Will a DVI to HDMI adaptor work when connecting the ipad2 to a projector?
I have connected my ipad2 to my HDTV and it works perfectly. I'm trying to connect the ipad to either the DVI port on my classroom laptop or to my Promethean board so that I can mirror educational apps for my students. Does anyone have suggestions on how to make this work?

No, there's not any damage to your MacBook.
http://store.apple.com/us/product/HFQL2VC/A/moshi-mini-displayport-to-hdmi-adapt er-4k?fnode=51

Button that always works when Unde the Enter key to record the information?

Hello everyone,
How do Oracle Express, a button that always works when Unde the Enter key to record the information
and every time I write some information that the cursor is placed back into the Text Field item only on my screen
order to optimize this process
I appreciate your cooperation and attention ...
good day ...
Reynel Martinez Salazar

Hi,
First, you should change your text item to a "Text Field (Always submits page when Enter press)" item. This adds a call to the submitEnter() javascript function which will submit the page when you press Enter while in the text field.
Second, on your page, edit the Page definition. In there is a setting called "Cursor Focus" - set this to "First Item on Page". When the page is loaded, this will put the cursor into the text field.
Andy

1.call information such as call waiting,call forwarding, call holding is not working when caller the call me or im wait for my call i cant see any title by iphon , and also holding is the same.2. there is not any option for call baring.

Hi. please solve my problem.
.call information such as call waiting,call forwarding, call holding is not working when caller the call me or im wait for my call i cant see any title by iphon , and also holding is the same.2. there is not any option for call baring.3.playback music is not hearing by second partner during the call.4.i cant select ringing ton from saving tons.
thank you in advance.

Hi Ersin,
Exception 1 would seem to be FORMATTING_ERROR, which suggests something in the design of the Smartform. However, that doesn't fit with the form being generated from a report, but only erroring when called from a function module. I can think of no reason why the different calling method would be a factor.
When FORMATTING_ERROR is raise it should also set a message ID and number, are you able to determine what they are?
Regards,
Nick

Hotspots created in Framemaker 11 don't work when generating the PDF

Similar Messages

Maybe you are looking for