Hotsync does not update either Palm Desktop or Outlook

I have had to move the hotsync of a Palm 270 and a Palm 650 to another computer (Windows XP) because the primary computers for my wife and I are now on Windows 7. The hotsync from the Palm 270 says that it backs up successfully (and the backup directory seems to be ok) but nothing shows up in either the Palm Desktop or Outlook. I have changed the redirection to each one in turn. I have uninstalled and reinstalled Palm desktop 4.2.2 and that doesn't work. I have installed 4.2.2 on a vanilla laptop that has not been used before for hotsync (has only Palm Desktop on it) and it still does hotsync successfully but nothing show on the Desktop. I was able to hotsync the 650 previously to the Palm Desktop and then migrated it over to outlook using third party software. The 650 data was then downloaded to the Treo 750 ok (Windows 6).
Now I'm hoping to move the Treo 270 data to the Treo 650. But I can't get the blankey-blank data to come up in either the Desktop or Outlook. The Treo 270 is on its last legs and the clock is running for its demise.
Any suggestions
townle
Post relates to: Treo 650 (Unlocked GSM)

What version of Windows 7 are you on, 64-bit or 32-bit? There sre no drivers for 64-bit Win 7 available. You will never be able to sync by cable to this OS. There is work-around using bluetooth, but neither of these device have bluetooth. Also Windows 7 requires Palm Desktop 6.2.2 to work properly.

Similar Messages

HT1222 I just installed this update and now I cannot access "Mail" at all. I tried reinstalling the program, but that does not work, either. Help!!!!!!

I just installed this update and now I cannot access "Mail" at all. I tried reinstalling the program, but that does not work, either. Help!

Paldeng, thanks for the suggestion. I've done all that. I can connect to the server, but apparently they are not recognizing my ID and password. I can use the server program if I don't go through Mail (using the same ID and password). My mother in another state with another provider has had the same email issue, as also my husband on his laptop who uses the same internet connection I do. His worked fine until we had it repaired at the Apple store and all the original programs reloaded (with the required updates, I assume). We can receive email in Mail, we just cannot send.
I contacted my service provider, and we went over my connections. They said it was not their problem and connected me with Apple, resulting in a charge to me because my warranty is long expired. Apple swears it is not their problem, it is the provider, so here I sit. My son was able to fix my Mom's Mail (she's 97) and got my husband's working also, until mine went out, by tweaking connection descriptions and ports remotely. The thing is, we had not messed with any of those settings, so what changed? I just did not want to bother my son again, as he has many other demands on his time.
Since this fiasco with the Mail v4.6 update, I'm wondering if something else was updated that works well with Lion and Mountain Lion, but does not work well with Snow Leopard and Leopard. I think the problem I had with the Mail update was that my Mail program had been renamed to Mail (original), and therefore was not being recognized by the update. Perhaps they had another tweak in there somewhere that is affecting outgoing mail connections?

Exchange: forward/reply on iPad does not update desktop message status

When one replies to or forwards a message through Apple Mail, the original message gets a little symbol (a curvy or straight arrow) to show that it has been replied to or forwarded.
However, when replying through iPad or iPhone on an Exchange account, the message status is not updated on the desktop. Replies sent via iPad on a standard IMAP account correctly update the message status however.
Any ideas why it does not work for Exchange?
Thanks,
Simon

Oh well, I answered the question myself. The reason (although since not one other person seems to have noticed this issue except me, nobody will really care ) is that ActiveSync on the iPhone doesn't update the message status on the server.
http://web.archive.org/web/20080822164152/http://blogs.msdn.com/jasonlan/archive /2008/07/18/iphone-2-0-windows-mobile-for-push-email.aspx

Centro will not sync with Palm desktop - Calendar and/or Contacts

I have used a Palm device for many years. Acquired a new Centro. Upon installation of Palm Desktop (on Windows XP) that came with Centro, all contacts, calendar, to do, memos, etc transferred to the Centro during installation.
Subsequent changes to contacts and/or calendar on Centro are not syncing with Palm desktop when Hot Sync is performed. Hot Sync starts and appears to complete normally. To Do list and memos appear to sync just fine. Have tried changing conduits to have Centro overwrite desktop. Have uninstalled/reinstalled Desktop many times.
Hot Sync log:
HotSync operation started for Daniel M. Key on 07/02/08 13:35:13
OK Quick Install
OK VersaMail
OK Memos
OK Media
OK Tasks
-- Backing up MultiMail BData to C:\Palm\MD\Backup\MultiMail_BData.PDB
-- Backing up PmTraceDatabase to C:\Palm\MD\Backup\PmTraceDatabase.PDB
-- Backing up HxSyncRegistry to C:\Palm\MD\Backup\HxSyncRegistry.PDB
-- Backing up Saved Preferences to C:\Palm\MD\Backup\Saved_Preferences.PRC
OK Backup
HotSync operation completed on 07/02/08 13:35:19
Please help. Thx.
Post relates to: Centro (Sprint)

I have a Centro/Verizon Wireless using Versamail with accounts established for personal POP and Exchange e-mail synchronization. The latter account is for work. Previously I owned a Treo 650p using Versamail.
When I first installed Palm OS Desktop and synched to my Centro device, it was on a Windows XP home computer, and no Versamail accounts were defined. First I downloaded and installed the Versamail version which allowed Exchange synchronization. I exported the Treo650p contacts list to a disk file, and imported it onto the Windows XP home computer into the Palm OS Desktop installed with the Centro-supplied CD. This synched the imported contacts list to the Centro fine. After I defined all the POP and Exchange accounts, synchronization with the office Exchange contacts list worked fine, and still does. Synchronization with the windows XP home computer for contacts seems to still be ok, too regardless of the MS Exchange Versamail account commingling with my personal POP accounts. Maybe the install sequence is overriding the previous posts' notation that MS Exchange mail definition will override synch with Palm OS Desktop?
The problem now is I have a different/second home computer that's Vista os. I installed the Palm OS Desktop and synch with the Treo. The contacts list is not synching to this second home computer, maybe because I didn't follow the exact same sequence as for the Windows XP pc? I can still synch my Centro with my Windows XP pc and that includes contacts.
Is there a way on this second pc to override the MS Exchange contacts override for synchronization without having to go through the exact same install sequence as occurred on the Windows XP machine?
Post relates to: Centro (Verizon)

I cannot past with the lastest version. CTRL V does not work either

I cannot past with the the most recent version released today. CTRL V does not work either
== This happened ==
Every time Firefox opened
== When my system updated the newest version today

Issues with the right-click context menu not working can be caused by the [http://toolbar.yahoo.com/ Yahoo Toolbar] (Tools > Add-ons > Extensions)
See:
[[Troubleshooting extensions and themes]]
http://support.mozilla.com/en-US/forum/1/380010
https://support.mozilla.com/en-US/forum/1/552540?
https://support.mozilla.com/en-US/forum/1/472971
Also see:
https://support.mozilla.com/en-US/kb/Clipboard+not+working
http://kb.mozillazine.org/JavaScript#Advanced_JavaScript_settings
http://kb.mozillazine.org/Prevent_websites_from_disabling_new_window_features
'''''Other Issues''''': ~~red:You have installed plug-ins with known security issues. You should update them immediately.~~
'''Update Java''': your ver. ~~red:1.5.0_02 (very old)~~; current ver. 1.6.0.20 (important security update 04-15-2010)
(Firefox 3.6 and above requires Java 1.6.0.10 or higher; see: http://support.mozilla.com/en-US/kb/Java-related+issues#Java_does_not_work_in_Firefox_3_6 )
''(Windows users: Do the manual update; very easy.)''
~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
See: '''[http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates Updating Java]'''
Do the update with Firefox closed.
'''NOTE:''' Java version 1.6.0.21 has been released. It is mainly an update for developers of Java applications and most users do not need to be concerned about downloading version 1.6.0.21. '''''At this time''''', the update option in existing installations of Java 1.6.0.20 are not updating to version 1.6.0.21; '''''at this time''''', it must be manually downloaded and installed. According to the Java release notes:
''"'''Bug Fixes'''''
''Java SE 6 Update 21 does not contain any additional fixes for security vulnerabilities to its previous release, Java SE 6 Update 20. Users who have Java SE 6 Update 20 have the latest security fixes and do not need to upgrade to this release to be current on security fixes."'' Source: http://java.sun.com/javase/6/webnotes/6u21.html
'''You '''~~red:'''MAY'''~~''' need to Update Adobe Reader for Firefox (aka Adobe PDF Plug-In For Firefox)''': your ver. N/A; current ver. 9.3.3 (important security update release 06-29-2010; see: http://www.adobe.com/support/security/bulletins/apsb10-15.html)
~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
See: http://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox#Installing_and_updating_Adobe_Reader
''You may be able to update from the Adobe Reader installed on your system'' instead of going to the Adobe site and downloading. Open the Adobe Reader installed on your system (''in Windows, Start > Program Files, find and click Adobe Reader to open''), click Help, click Check for Updates. Allow the download/update to occur. If you use this method, no need to proceed with the instructions below, '''but''' do look at the two bulleted items at the bottom "'''NOTE for IE:'''" and "Also see:". Restart Firefox and check your new version here: http://www.mozilla.com/en-US/plugincheck/
''If you go to the Adobe site to download the current Adobe Reader:''
-'''use Firefox to download''' and '''SAVE to your hard drive''' (save to Desktop for easy access)
~~red:-See the images at the bottom left of this post to see the steps to take on the Adobe site~~
-exit Firefox (File > Exit)
-In Windows: check to see that Firefox is completely closed (''Ctrl+Alt+Del, choose Task Manager, click Processes tab, if "firefox.exe" is on the list, right-click "firefox.exe" and choose End process, close the Task Manager window'')
-In Windows: double-click on the Adobe Reader installer you just downloaded to install/update Adobe Reader
*'''NOTE: On Vista and Windows 7''' you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). See this: http://vistasupport.mvps.org/run_as_administrator.htm
*'''NOTE for IE:''' Firefox and most other browsers use a Plugin. IE uses an ActiveX version. To install/update the IE ActiveX version, same instructions as above, except use IE to download the ActiveX installer. See: [[ActiveX]]
*Also see: http://kb.mozillazine.org/Adobe_Reader ~~red:'''''AND'''''~~ [[How do I edit options to add Adobe to the list of allowed sites]]

5th gen ipod does not connect to mac desktop or itunes

My ipod does not connect with my desktop or itunes (ie when I plug the ipod in using the original USB cable nothing happens--no charging no recognition that it has been connected). My nano does work with the same cable so I know it's not that. I've followed the support instructions resetting, downloading the latest software and restarting. I cannot, however, restore since the first step of the instruction is to connect the ipod and wait for it to show in the source list in itunes. It is also interesting that when I use the car charger the ipod does charge and shows the charging icon.
Any suggestions?

I guess i can lend my voice to the conversation. my ipod "locks up" when i connect to my computer also. i just updated itunes and have not been able to connect. there is no ipod folder on my computer when i search through ""finder". i have to "reset" it after i disconnect to continue to play it. i have done everything short of "restoring" due to i have over 3000 songs and i'm unable to back up. the manuel refers to a disk to update. i can only play songs, and recharge. need help to.

Mobile.me Calendar does not update/sync on iPhone

Since I did my upgrade to the new version of Mobile.me Calendar (as requested by Apple!), my iPhone no longer shows entries that I have typed into the Mobile.me Calender website. I no longer use iCal because Apple said it would not work with the new version of Calendar on Mobile.me, so I did the upgrade to stay in sync with calendars on my mobile.me site and iPhone, but the iPhone does not update. I deleted my calendar entries on my iPhone hoping that the Mobile.me would re-sync the data, but that didn't happen either. Here is my info:
iPhone version 3.1.3(7E18) Model MA712LL (first original iPhone)
What else can I tell you to help me please?

Please always post your System details when you have a question. The upgrade to the new MobileMe calendar produces different results, and different problems, with different versions of OSX.
Snow Leopard: during the upgrade process your iCal calendars should be moved to MobileMe (this can take some time and you have to wait for it to happen). Once done, your iCal reads the calendars from MobileMe so any changes made in either place will be visible immediately. If this has not happened then this Apple Tech Note provides instructions:
http://support.apple.com/kb/TS3397
Leopard: when the upgrade is completed iCal on Leopard will not be able to see the MobileMe calendars until an additional process is carried out, detailed in this Apple Tech Note:
http://support.apple.com/kb/HT4330
Tiger: iCal on Tiger cannot read the MobileMe calendars, period. The only workaround is to upgrade to Leopard, or Snow Leopard if possible (Intel Mac required).

Centro will not Sync with Palm Desktop

I have removed all Palm references from laptop as suggested in: Community Help Forums : Hardware & Software : Software : Re: Syncs fine -- missing all data in Desktop App with no luck.
( http://forums.palm.com/palm/board/message?board.id=software&message.id=35331&query.id=1042#M35331 )
I have a Windows Vista, downloaded Hotsync Manager 7.0.2 and all data (contacts/calendar) from Palm Centro will not appear in Palm Desktop. I have made sure that:
1. user name in Hotsync is the same as is in Palm Desktop
2. tried different user name (suggested "Test" ) with no luck
3. changed name of device through "prefs" icon (at least, in Bluetooth, Device Name is "Palm Centro") I am unable to find another option to change the name of the device for syncing purposes if it is not through Bluetooth
Any other suggestions? I have made entries into te Palm Desktop calendar, do a Hotsync and the entries from the Palm Desktop entries are not appearing into the Palm Centro, and the Centro's contacts and calendar entries are not showing up in the Palm Desktop.
Any suggestions will be greatly appreaciated!
Post relates to: Centro (Verizon)
Post relates to: Centro (Verizon)

Do you have the Centro set to sync with Microsoft Outlook by mistake? Look in Outlook and see if your info is there.
If it is, you can run a simple program in your Start/All programs/Palm/PIM Conduit Sync/Sync with Palm Desktop to switch it back.
Wyrenut
Post relates to: Centro (AT&T)
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

My iPhone 4S on iOS7 is stuck on Apple Logo, and it goes off, then back to Apple Logo again for hours. Pressing home button together with sleep button does not help. Plugging the phone to Mac and restart does not help either. What do I do?

My iPhone 4S on iOS7 is stuck on Apple Logo, and it goes off, then back to Apple Logo again for hours. Pressing home button together with sleep button does not help. Plugging the phone to Mac and restart does not help either. What do I do?
Have not backed up for months, so prefer not to lose the data.
Thank you for your help in advance.

Restore iPhone with iTunes on computer. Open iTunes on computer. Connect iPhone to computer with USB cable. Hold both Home and Power buttons until iTunes recognizes iPhone in Recovery Mode, usually about 20 seconds time of holding both buttons. Click the Update or Restore button that iTunes offers.

When syncing on my Galaxy Note 2 the 'bookmarks toolbar' does not update

I have a laptop, desktop, and Android phone hooked up for syncing. After the initial sync the 'bookmarks toolbar' tab on the galaxy note 2 does not update when these are changed on the laptop or desktop. How do I fix this?

Hmm nothing at https://twitter.com/mozservices or https://services.mozilla.com/ states that however it is having a service disruption according to http://status.mozilla.com/11627/149178/Sync-%5BBasic%5D

The tab bar in Safari does not update automatically

Hello,
I have a strange problem with Safari full screen mode and the tab bar always displayed, it does "not update" alone. In fact when I, for example, two tabs and I created a third (by clicking a link) it does not appear immediately. I have to either click on the tab bar and pretend to move one, either click the "Naviagtion tabs" for bar tabs emtte update.
A little heavy, huh?
All my software are up to date and even reinstalled recently, but the problem is still present.
OS X Lion Mountain / / Safari 6.0.2
Regards

I solved the problem by uninstalling Glims.

Approval Workflow does not update the Content Approval status if started automatically

Hi,
I’m using a simple Approval Workflow associated with
Content Approval on site pages. It works fine when I set it to be started manually (by using
Allow this workflow to be manually started by an authenticated user with Edit Item permissions
option) and on the completion of the workflow the
Content Approval status is updated accordingly. But when I set it to be started automatically (by using
Start this workflow when a new item is created
/ Start this workflow when an item is changed
options), it does not updates the Content Approval status. Note that I’ve set the
Update the approval status after the workflow is completed (use this workflow to control content approval)
option to true.
Regards

Hello,
It is recommended to select "Start this workflow to approve publishing a major version of an item" when you want to use the workflow to manage content approval for
a library.
According to the Notes for “Enable Content Approval” option in
this reference:
If you are using this Approval workflow to manage content approval (moderation) for a library, and you selected the Start this workflow to approve publishing a major version
of an item check box on the Add a Workflow page..
If you did not select the Start this workflow to approve publishing a major version of an item check box on the Add a Workflow page because you do not want this workflow to
be the default content approval workflow for a library, you can select the Update the approval status (use this workflow to control content approval) check box to make this workflow a secondary content approval workflow that specific users can
start manually.
That means having an approval workflow start automatically when a document is changed or created is not a good practice when you want to use the workflow to manage
content approval for a library. You should either select "Start this workflow to approve publishing a major version of an item" or give users the option to start the workflow manually at the time they want to submit for an approval.
Thanks & Regards.
Lily Wu

I try to drag a photo folder into lightroom 4 on my MAC, lightroom fails to open and a 'Corrupt Catalog Detected' screen pops up. Clicking on 'repair catalog' does not work either. Any suggestions?

I try to drag a photo folder into lightroom 4 on my MAC, lightroom fails to open and a 'Corrupt Catalog Detected' screen pops up. Clicking on 'repair catalog' does not work either. Any suggestions?

I'll have to get a better instructor on deleting the preferences since when I've doen it in the past nothing is there when I open LR the catalog is gone. I assumed that was what was supposed to happen so I start importing all over again. But that is a different issue...
The problem has been happening since at least the beta of 3 came out and I saw other posts back then saying they had similar issues but I assume it was a beta thing... But since the full version came out and through each incremental change I haven't seen an improvement. If anything it has gotten a little worse with time.
I have to try to be careful to not be in a hurry and start clicking around in the catalog as it seems fragile until it has cataloged all the photos in the library. When starting you will see the numbers populate the folders very slowly and I try not to click on a folder that hasn't had the number of photos pop up yet. Also draging the slider down to see more of the cataloge can have the same affect and crash the system.
I wish I had more to go on.. I believe it may be a resources issue but as I went from 3-4 Gig I thought it would get better. I don't have big programs running but did have outlook and word running in the background along with firefox and chrome.
And yes it only happens on this HP desktop (it's 2+ yrs old) and may be showing it's age a bit. My laptop which has less resources doesn't have the issue.. I have them sharing the catalog. (not at the same time) just when I'm working in other places in the house.
Jeff

Updateing CustomXML scheema from sharepoint 2010 in VBA does not update the DIP (Document information panel)

I need to update a schema from Sharepoint with namespace
http://schenas.microsoft.com/office/2006/metada/contentType when i am opening a Word document. I am using VBA to do so. When i have made the Changes it does not update the DIP, not until i save the document.
Is there a way to update the dip using VBA.
/Ola
olha

Hi,
This is the forum to discuss questions and feedback for Microsoft Office client. For any VBA related issues, I would suggest you to post in related MSDN forum -
Microsoft Office for Developers, to get better support experience:
https://social.msdn.microsoft.com/Forums/office/en-US/home?category=officedev
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Firefox Sync does not update automatically when I add a new bookmark.

I use one desktop and one notebook at the same time. Firefox Sync does not update bookmarks between my desktop and notebook when I add a new bookmark from one device or the other. Firefox Sync only updates when I manually sync my data from each device. When I used Google Chrome, the Sync feature updated my bookmarks almost instantly. Is there any way I can make Firefox automatically sync whenever I update my bookmark?

Your imported bookmarks from IE should all be in one folder named "From Internet Explorer". The imported Bookmarks are kept separate for easier identification by the user. You can move them to other folders outside of that folder if you wish; you can also delete any duplicates that you may have placed into Firefox Bookmarks/folders before the import.
*See --> [https://support.mozilla.com/en-US/kb/Importing%20favorites%20and%20other%20data%20from%20Internet%20Explorer Importing favorites and other data from Internet Explorer]
For other Bookmarks info and links:
*See --> [https://support.mozilla.com/en-US/kb/how-do-i-use-bookmarks How do I use bookmarks?]
'''If this reply solves your problem, please click "Solved It" next to this reply when signed-in to the forum.'''
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update as necessary:
*Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

Hotsync does not update either Palm Desktop or Outlook

Similar Messages

Maybe you are looking for