HotSync error: no card present in SD Card-slot

Tried a regular hotsync on my Palm TX. Error message would pop up periodically saying Install error: no card present in the SD Card-slot. Install to Card synchronication failed. Usually no problem. Still would sync ALL my data. Suddenly, the hotsync ERASED MY ENTIRE CALENDAR forever!! Only thing left is my CONTACTS. Can I get back my calendar data from a backup somewhere? How?? Help!
Post relates to: Palm TX

The two events are most likely unrelated. If you have only synced the time your data was loss then yes you can recover the data. If you synced since then, it's gone. Make sure the Palm desktop is closed. Browse to the folder location. C:/Program Files/Palm/*Hotsync username*/Datebook
Locate the datebook (.dat) file and the datebook.bak file. Rename the datebook (.dat) file to datebook.old and rename the datebook.bak to datebook.dat Then reopened the Palm desktop and see if your data was restored.
If you're using Vista and the newest version of the Palm desktop the process will be slightly different. I'll post those steps if needed.
Post relates to: None

Similar Messages

How long it takes to repair an Apple iPad with the error "sim card not detected". The ipad is in Apple since 19 January and still has the status "Repair in Progress".

How long it takes to repair an Apple iPad with the error "sim card not detected". The ipad is in Apple since 19 January and still has the status "Repair in Progress".

There is no way any fellow user here can know anything specific about your repair status. You will need to call Apple and ask them yourself.

Error putting Card properties?

Hi,
I keep encounter following error during the crawler process, no card has been created. (I've used DocFetch)
Aborted Card creation for document: mail.gif. Import error: IDispatch error #19808 (0x80044f60): [Error Importing Card.Error putting Card properties.]
Can anyone give some hints?
Thanks and Best Regards,

This is a new install with DIAdem 2012 SP1 downloaded within the last 30 days from your site running in evaluation mode.
There has never been another version of DIAdem on this laptop.
>> Did this ever work, or has it failed on your first ever attempt? If it did work once, what has happened to this computer between then and now?
I can't give an honest answer here because I don't remember. It only failed in the last couple of days (that I noticed) and has been used since 12/17/2013. I could go back to a restore point, but I've installed
>>Have you installed LabVIEW on that computer before? If you have LabVIEW 2012 or later, can you pop up the DataPlugin selection dialog from there?
no
I'm trying this today, and am now getting the same error when I try to create a new plugin using the "create dataplugin..." button in the same dialog box. I know this worked before or I wouldn't have been able to create plugins. the import dataplugin button works.
Are there some kind of registry keys or files on the computer which I can clean out after an uninstall (or prior to a repair) to make sure a reinstall is completely new?
Do you have any idea what/where the suddlgshow that the error is generating is refering to? Maybe I can check the permissions on that folder, maybe they are set to read only or something.
Thanks,

HT201303 Every time I enter my credit card information I always get an error stating card was declined. Please help.

Every time I purchase a credit card and add the cc info to my account I get an error stating card was declined, Please enter valid cc information. When I go online to my cc information, I can see charges from IStore with purchases I haven't purchased.

Is it a debit card or a credit card ? From http://support.apple.com/kb/HT2001 :
The available payment methods vary by country, but typically you can use credit cards, gift cards, store credit, or PayPal.

Hi, I have a Lenovo 3000 n100 that does not recognize the dvd player or SD memory card slot

Hi, this is my first time on here so forgive me if I don't give all of the right information, I will try. Until about a month ago my dvd player and SD memory card slot worked fine. I was attempting to download pictures from the SD memory card to my laptop when for some reason it not only stopped reading the memory card but it erased it also. I tried to watch a movie on it to see if it was working and it is not. I checked the computer to see if I could manually turn it on and neither the memory card slot or the dvd player show up at all. Is this a driver problem and if so how do I fix it. Any help would be greatly appreciated. Thanks, Linda

I have struggled with the same thing, until about 1/2 hour ago....And its real simple. I'm not a techy but here's what worked for me.
Since Lenovo doesn't send boot discs you are going to have to create one. I went to http://www.ntfs.com/boot-disk.htm and downloaded the trial version - good for 10 days. If this works for you then you should buy the software (that goes w/o saying).
Once loaded to your machine you will need to create a DVD (CD may work as well, all I had was DVD's handy). Just lauch the application and it will do this for you.
Then you need to insert the DVD/CD into your player and restart the machine.
Once lauched the Software will lauch the Active@ Boot Disk menu. One of the options (going from memory here) was to give you a windows prompt. I simply typed c: and took me to the C drive. Then I typed chkdsk /f c:
I was then told my c drive was locked (sounds familiar I bet) but this time I was given the option to dismount the volume which I did. And it finally ran chkdsk, found and corrected all errors.
I rebooted my machine, launched diskeeper, and guess what - I can finally defrag my harddrive now which is sorely overdue!
Good luck. I hope this works for you!

Problem with memory card slot on nokia c5 03

Sir,
I have a Nokia C5 03 from the last 8 months.....
Working very well.
Recently, my memory card stopped working.
I thought that there might be a problem in the memory card and bought a new one.
Even though i inserted new card in my phone, i am getting the same error.
In file manager it is displaying as "Memory card Corrupted."
I have checked the new memory card by inserting in to another phone which was working normally.
There i have even formatted the new memory card and again inserted into my c5.
Then also i am getting the same error message........
Can any one suggest me what to do in this regard??????
Thanks in ADVANCE.
Solved!
Go to Solution.

Hi,
Welcome to the forum!
Have you also tried inserting the old memory card to another phone as well? What happened after inserting it to another phone? If it's working properly with another phone, the memory card slot of the C5-03 might have an issue so you should bring it to the repair facility to have it checked.
You can search for the nearest repair facility in your area from this link: http://www.nokia.com/in-en/care-point-finder/
Hope this helps.

Satellite P300-150 PSPC4E: Cannot get Express Card slot working with XP

Hello.
I have downgraded to XP on my machine and unfortunetly I am unable to get the Express card slot to work.
The Intel chipset drivers on the Toshiba site haven't dont anything.
I am trying to get an eSata port working via the express card like I did with Vista but no joy at all.
Any ideas?
Regards
Rob

Go to Device Manager and check if the express card is installed properly, or if its reporting an error.
You should update the BIOS to the latest version. BIOS updates can sometimes fix problems like this.
And ensure you have XP Service Pack 2 or 3 installed.

Built in SD Card Slot issues - Canon XSi

I have had a Canon Digital Rebel XSi for a few years now and it has always worked well with my macbook and iphoto. I recently upgraded to the Macbook Pro (early 2011) and was pretty excited about being able to leave the USB cable behind.
Here's where it gets interesting:
When I pop the SD card out of my camera and put it into my macbook pro the SD card shows up on the desktop and in iphoto 2011, however it doesn't have anything on it except for the default folders that the camera creates. No photos.
I could also see that there was occupied space on the SD card, no files but used space
When I put my SD card back in the camera and got an error of "Cannot create folder" so I couldn't use it or see the photos anymore
I used a restore program to get all the photos I'd taken over the weekend trip off the card
Next I decided to reformat the SD card in the Canon XSi, I popped off a few pics and put the card back in the Macbook and I was able to import them
Cool it was fixed... well, actually I put it back in the camera after importing and "Cannot create folder" again! Again the card is useless
I updated the firmware on the XSi to the latest 1.1.0 version and tried it all again, but still the same results
There is a fix and it's simple enough. If I just continue to use the USB cable everything works normally. I will of course do this, but I'd love to use the new SD card slot and not corrupt my card. I'm curious if anyone else is having similar issues. I'm also concerned that when I grab photos from a friend's SD card that I'll break it, and that just aint cool.
Thanks to anyone who reads through this exciting post and offers any suggestions.

You could have a faulty slot, aluxious.
Have you tried inserting the card in the slot as quickly as possible, rather than gently, though. I've found a couple of mine at least don't mount if I insert them too slowly. (http://support.apple.com/kb/HT3553 seems to confirm the need for this).
Checked with various cards, and made sure the contacts on the cards are clean and undamaged, I guess?
Cheers
Rod

Sd card slot not working. HELP

hi I have had my macbook pro 13'3 for 5 months
just now I have tried to put my SD card in the SD slot and it goes in lopsided and doesn't read
do i take it to the genius bar or what?
also it is hard to fit in and it has had some more problems like a dead pixel which I haven't got fixed yet and it doesn't go to sleep properly (and i'm not an uncareful person it has never been droped or any thing.)
really need an answer on this guy's
Ben.

I purchased an iMac Friday July 27. I think I may have a solution that worked for me but requires a delicate touch and good eyesight. What the issue was the first time I insert a SD card it would read it no problem. Then when I ejected to insert another, it would not mount unluss I restarted the iMAc with the card inserted.
In searching the forums I found one user said it is a microswitch contact n the iMacs internal SD card that detects a card is present.
The remedy is to work this switch a bit. If you look inside the SD card slot on the side of the iMac, you will see a variety of contacts that engage the SD card's contacts. But on the very top in the back is a small metal contact that lines up with the 45 degree angled edge of the SD card.
So by using a tooth pick or another non-conductive piece, VERY GENTLY work this switch in and out. First couple times I did it, it would reset the switch, but card would remount again on the second try. But as I did it more it finally started working.
The other thing I did was shut down the computer, unplugged it from the wall for at least 15 seconds. plugged it back in and waited 5 more seconds.
Then on start up I reset the PRAM. By once you hit the power button, immediately hold option(alt)+command+P+R all at the same time. Keep them held down until you hear the second chime. Was told reseting the PRAM resets the hardware memory that sometimes can become corrupt. Can't say for sure this helped, but right out of the box I installed new RAM into my iMac. So it's possible something got screwed up in the process.
But I think massaging thecontact did the trick.
It's not hard, but be carefull to damage or overly bend the contact. Take it in if you feel uncomfortable doing this.

Digital Memory Card slot problem -- dv3510nr

I wanted to load some photos into my new HP notebook from a Memory Stick Pro Duo card. I discovered the slot is much bigger than the card. Nothing grabs the card. Looking at a photo from the online manual, there seems to be a housing around the slot that isn't present on my computer. It looks like a very squashed T. My computer's opening is a rectangle.
Does anyone know if my computer's missing a part, or if I am doing something wrong? I am NOT misidentifying the express card slot as the media slot. It lies directly above, and is bigger yet.

I have an HP G60 that will take the regular Memory Stick but not the Memory Stick Pro Duo. I checked both sticks and they have the same contacts but the Pro Duo stick is much shorter thus making it impossible to pull out of the card reader slot. I found that if you really want to use the Memory Stick Pro Duo you can get some 1/2 inch strapping tape (The kind with nylon strings imbedded in it) and tape a little pull tab on the outside edge of the stick. It works really well if you
pull gently to extract the stick. This is just a tip if you really have the need to use the slot.

PC Card slot unusable after ejecting device

I use my TiBook's PC Card slot for a Linksys wireless G card, and a SanDisk compact flash card reader. For the past few days, OS X only recognizes the device that is in place when the system is started (cold start or restart). When I eject the device and swap in the other one, or even put the initial device back in, it is not usable. The PC Card menu icon appears, and clicking on it shows that the device is being properly identified (Broadcom 802.11 or SanDisk blah blah depending on the device) but OS X won't let me use it. In the case of the wireless card, Internet Connect says "no airport hardware detected". In the case of the compact flash card, it doesn't mount or show up in Disk Utility.
Any advice?
TiBook 867 Mac OS X (10.4.7)

Claudio Lis wrote:
Hi All,
I have a Powerbook Titanium G4 1GHz and an Adaptec AUA-1420a USB 2.0 2 Port CardBus. This card worked fine until Leopard instalation, I made all my backup in a external USB drive before start the Leopard setup.
Now, when I connect the card on PC Card slot, nothing happen. I tryed a Encore Ethernet Adapter and had the same status. In logs (system.log, or others in /var/log) nothing about, no errors, no warnings, no info, PC Card Slot is completly dead.
I tryed reinstall Tiger and Panther in other partition, because this card used work in those version, but, now CardBus doesn´t work anymore.
I tryed this card in another Powerbook G4 Aluminium running 10.4.11, and it works fine and system.log shows when it are connect or disconnect.
Can anyone help me?
Thanks!
Welcome to the Apple Boards:
Two things:
First, click on the little apple logo, top left whilst holding down the Option key and select System Profiler.
Check the POST diagnostic and also the other hardware. See if anything shows up
Secondly, zap our PRAM and see if that helps.

Card slot does not work after update (14/10/2011)

Card slot does not work after yesterday update (14/10/2011)! It works with my SD card month ago, but now it dosn't!!!
MacBook Pro 13 OS ver. 10.6.8

Thanks for your suggestion. I downloaded OnyX and ran the cleaning function. After restarting, I opened Help and once again the first screen appeared fine. But again most of the links did not work, though those under the "What's New" heading did work. I might add that I had previously tried a variety of suggestions posted in another thread, which included deleting from the caches folder in Home>Library several files such as com.apple.helpui and help.plist in the Preferences folder. (As noted in my previous post this evening, I also created another user but that also did not have any effect.) Any other ideas? Thanks

Memory speed and graphic card slot

Hi,
I have just built a system with a P67A-GD65 B3 board, everything works fine, but while double-checking on the system's specs and performances I came across two weird issues:
- I have 2 x G-Skill F3-17000CL7-2GBXHD RAM sticks at 2133MHz, I have enabled XMP in the BIOS (with leaving all other settings in automatic mode) and the BIOS indicates the RAM is running at 2133MHz, 7-10-7-27, however, when I run the MSI Control Center (latest version of the app) it says on the home screen of this app that my RAM is detected as "DDR3-1600 (800MHz)" in the speed field. I also ran CPU-Z and it says there that my DRAM frequency is 1064.4 MHz (the FSB:DRAM value is "1:8"), with the 7-10-7-27 timings values. Which one should I believe? The WEI gives a score of 7.9 for my memory which is ok, and I am not running in any performance issue nor I am looking to do any overclocking, but I just want to make sure that I am making the best out of my money and that I am using the RAM as it is supposed to be used... Can someone shed some light here?
- I have installed my graphic car on the slot that is the furthest possible from the CPU as I believe they both generate quite some heat and so they should be as far away as possible from eachother. In CPU-Z I have a link width for the graphic interface of "x8" with max supported of "x16". Is this something that is related to the slot and should I move the card to the slot closer to the CPU? Or is this something else? Is there a setting in the BIOS maybe that can address this?
Thanks!

Both are correct information. The detected '1600MHz' is actually the factory stock speed from the IC chip of the RAMs. The readings of "1064.4MHz" is the running speed that the RAM is currently on so for DDR calculation, you have to multiple 1064.4MHz by 2 to get 2133MHz.
The reasons for 2 readings to be detected is due to your RAM being factory overclocked by manufacturer before it went on the retail shelves, which is very common. Most or any RAMs that you see with speed above 1600MHz are generally overclocked by manufacturer using 1600MHz RAMs for speed boost.
The graphics card slot will still runs at x16 with your card.

I have a iPhone 4 which was on Verizon. I now want to start using it on Walmart Family Mobile. I know I have to get it jail broke but people are telling me that I can't use it as it has no sim card slot. Is there a way of getting around this problem?

How can I use a iPhone 4 without the sim card slot on Walmart family mobile?

The Verizon iPhone 4 is a CDMA only phone. It is not physically possible to use it on a GSM network. It doesn't have the right parts. Also, we can't discuss jailbreaking here.
Best of luck.

Looking for an inexpensive all in one HP printer that has an SD card slot. Any suggestions

Looking for an inexpensive all in one HP printer that has an SD card slot. Any suggestions

ChrisPbass,
I would suggest contacting HP Home & Home Office. They will be able to narrow down the field to what would be best for your particular use. There number is below.
1 (888) 999-4747.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

HotSync error: no card present in SD Card-slot

Similar Messages

Maybe you are looking for