HOTSYNC PROBLEM SOLVED -between Palm TX using desktop version 6.2 & Windows 7 64 bit

I to struggled with performing hotsynch between my Palm TX and my new Windows 7 64 bit computer. After 2.5 hours of palm tech support on my pc they gave up and deemed the task not solvable. I spent hours trying various options-nothing worked until this.
I performed a google search for Toshiba bluetooth x64 drivers. This took me to the following link:
http://aps2.toshiba-tro.de/Bluetooth/?page=download
I downloaded PC Bluetooth Stack version 7.00.10 for Windows 7 x 64. After downloading this suddenly the palm syncing software on my pc gave me the option to connect via bluetooth and I was on my way. My bluetooth dongle (cirago BTA-3210) was not a toshiba, but did use the toshiba driver stack. The driver that came with the bluetooth was not up to date- even though it was just purchased at newegg. The driver update that my pc found was also not 64 bit compatible. The only fix was to download the driver from Europe- hooray!!!!! PROBLEM SOLVED
Post relates to: Palm TX
Post relates to: Palm TX

Thanks for reporting your success!
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Similar Messages

Hotsyncing a palm centro using a bluetooth adapter and windows vista 64 bit

Please help. I have read and followed all of the other suggestions on this forum and nothing has worked.
I have a palm treo. When I try to hotsync using the bluetooth adapter, it gives me a message stating:
"unable to connect,port is being used by another application".
I have rebooted, soft reset, etc. and still get the same message.
I do not know how to set up another port on the windows vista program. That was one suggestion.
I have selected both bluetooth and serial port under the hot sync manager.
Nothing works.
Any help is greatly appreciated.
thanks
Post relates to: Centro (AT&T)

Hello akashmedehrotra and welcome to the community.....
Windows Vista 64 bit is only sync with a wireless connection. Either Bluetooth or Infra Red. The M515 does not have bluetooth, so you would have to purchase an IR Dongle and sync using Infra Red. You won't be able to sync with the USB cable on your desktop.
Colapop

Can I use photoshop version 4 on windows 8 machine?

can I use photoshop version 4 on windows 8 machine?

Photoshop 4 (from 1996)? No.
Photoshop CS4 (from 2008)? Probably. Give it a try.

Desktop software in my Windows Vista 64-bit OS

i cant download the desktop software in my Windows Vista 64-bit OS. it says its not compatible.what will i do?

Which software did you try to download? I am pretty sure that 6.1 is compatible.

What is the problem when opening jpg files using Desktop API

Hi, i would like to open jpg, or gif files using Desktop API, and the application crashes.The Desktop API is supported by my OS, because txt files, or file directories can be opened, mails can be sent, browsing is also supported.
Only jpg and gif, and i think other picture formats cannot be opened.
Obviously ACDSee and other picture viewing programs are installed in my computer.
The corresponding application code can be found at the bottom of the page of http://www.awprofessional.com/articles/article.asp?p=661371&seqNum=2&rl=1
my code:
if(Desktop.isDesktopSupported()){
Desktop desktop=Desktop.getDesktop();
try
desktop.open (fileToOpen);
catch (IOException ioe)
JOptionPane.showMessageDialog (frame,
"I/O problem");
catch (IllegalArgumentException iae)
JOptionPane.showMessageDialog (frame,
"File doesn�t exist");
fileToOpen is obviously a File.
Thx for the help in advance.
Message was edited by:
javahelps
Message was edited by:
javahelps
Message was edited by:
javahelps
Message was edited by:
javahelps

My file association for jpg files is correct, if i click on a
jpg, ACDSee starts immediately.Although I am a long time Windoze non-user, I vaguely remember that there's a difference between correct file-type association being set and some application starting at a mouse click on a file icon. I also vaguely remember Windoze file-type association mechanism uses a few action-types. Java Desktop should expect a specific action-type for the association.

Help, hotsync palm treo 755p to my laptop with windows vista 64 bit.

I am computer unsavy and could use some help. I have a palm treo 755p that previously synced with my old dell laptop. That computer broke, and I got a new HP with windows vista 64 bit. Previously, the dell was running windows xp. I have bought some new software, which I have downloaded to my laptop, and am trying to sync my palm to the new computer so that I can download the program to the computer. However, after installing the Palm Hotsync Manager and other software, and when I trying to sync, the computer does not seem to recognized my palm, and times out after a while stating "the connection between your handheld computer and the desktop could not be established. Please check your setup and try again.
Post relates to: Treo 755p (Sprint)

Palm OS devices will only sync to 64bit through Bluetooth. We have a stickie concerning this. It's the third topic down under windows hotsync. Does your computer have Bluetooth?
Post relates to: None
Message Edited by legendeld on 11-19-2008 07:36 AM

Using Apple Magic Mouse With Windows 7 64 bit and Parallels Desktop 8 questions

I will be getting an iMac in the coming months and installing Parallels Desktop 8 and Windows 7 64 bit.
I was wondering if I would have the functions of been able to left click, right click, scroll (preferably vertically but also occasionally horizontally) with the Apple Magic Mouse when I'm running Windows 7 through Parallels Desktop 8?
I just wondered if anyone has installed Parallels Desktop 8 and Windows 7 and have you been able to do what i mentioned above and also have you come across any other issues, problems whilst using the Apple Magic Mouse on the Windows side?
If there is any problems/issues with doing the above, is there anything I will need to do to get the above functionality to work?
Thanks in advance.

stz-42 wrote:
I'm using Parallels 8 Win 7 64 bit, on an iMac.
- leftclick and rightclick is working
- i miss the middle button in my cad-software
The same with the trackpad!
Sometimes scrolling is a bit too fast, becuase Win 7 isn't made to use with the Magicmouse or trackpad.
The only thing i miss / doesn't work ist the middle mouse button!
Thanks very much for the help stz-42 its much appreciated.
Providing I can left click, right click, scroll, then that's OK for me as I will be spending the vast amount of my time on the Mac side.
Are you able to scroll both horizontally and vertically when using Parallels 8 Win 7 64 bit on your iMac?

I just got a windows 7 64 bit laptop. I have a T3 Palm. What desktop version should I install?

I just got a win.7- 64 bit laptop. I have a T3 Palm. What version of Palm desktop should I install on my new laptop? I know there is a program written by Dimitry to be able to use a 64 bit machine. Can anyone tell me which desktop version to use? Any help you can give me will be greatly appreciated.
Thanks,
imanewbie
Post relates to: Pre Plus p100una (AT&T)

The lastest version is 6.2, you should be able to find it for download if you do a google search, you will also need to 64 bit drivers you can get them here: http://aceeca.com/index.php?option=com_maqmahelpdesk&Itemid=5&id_workgroup=1&task=downloads_category...
They are for 64 bit garnet which is Palm OS
Terry

Using Desktop software on different Windows platforms?

Dumb question from Blackberry newbie. I have a desktop with Windows Vista 64 bit and Outlook 2007 plus a laptop with Windows XP 32 bit and Outlook 2003. If I install Blackberry Desktop software on both will they work on same Storm smartphone, or am I looking for trouble?

Hi Ory69 and welcome to Discussions,
from the requirements you provided, I don't see a hinderance not to use Guardian Edge as long as you use Windows XP.
Why Windows Vista is not mentioned is a little mysterious, but might have a reason.
The MBP meets these requirements.
Only thing that could be a hinderance is the section with the 'BIOS Int 13h'.
According to this http://en.wikipedia.org/wiki/INT_13 the Int 13h is a Low Level Disk Services, which can cause trouble on a Mac, since Macs don't have a BIOS, but use the EFI http://en.wikipedia.org/wiki/ExtensibleFirmwareInterface , which is the successor of BIOS.
If Guardian Edge is relying on the presence of a BIOS, this can be a reason why it won't work on a Mac with BootCamp Windows.
So it might be wise, to contact Guardian Edge asking them if they see/know of problems using their software on a Mac.
Regards
Stefan

Problems with using Powerbuilder 12.0 on Windows 7 64-bit

Hi,
Until today, I was developing applications using Powerbuilder 12.0 Build 5530 (Classic ; not .NET) on a Windows XP laptop.
I work within a small team, so I routinely use the 'Source Control' (PB Native) feature.
Today, I installed Powerbuilder 12.0 Build 5530 on my new laptop, a Windows 7 64-bit laptop.
I have already encountered 2 problems:
1) I have filled the required info for 'Source Control' ; I see the 'Check out'/'Check in' actions in the contextual menu on PB objects but those actions stay disabled.
[see "PB_SourceControl_Problem.png"]
2) When I try to open the 'Deploy' object, I get an error message.
[see "PB_Deploy_Problem_1.png" and "PB_Deploy_Problem_2.png"]
The other member of the development team uses Powerbuilder 12.0 Build 5530 on a Windows 7 32-bit laptop without any problem.
As anyone encountered the same problem ?
And if so, is there a solution ?
Thanks in advance for the help.

Sophie,
That one error message that you are getting "Unable to open this project because the add-on software that was used to create it could not be found" happens when there are multiple pb runtime dlls on the machine.
Is there any chance you have multiple pb runtime dlls like the pbvm120.dll on your machine?
Thanks,
Beverly Duquette

AutoCAD 2000 Architectural Desktop 3 installation in Windows 7 64 bit Professional

How to get AutoCAD 2000 to install on a Windows 7 64 bit operating system. The problem we were having was with the forced installation of Netmeeting from the AutoCAD installation disc. Our solution at the time was to install AutoCAD on the Windows Virtual XP. The XP mode created more problems than we were able to ignore because the XP mode is very watered down and does support proper graphics for the drafting software. We decided to try another approach. Take the AutoCAD 2000 installation disc (Architectural Desktop release 3 in our case, which is based on AutoCAD 2000) and create an ISO image of the disc. I used MagicISO because it allowed me to make the image, and delete the folder for Netmeeting from the ISO image. I believe it is under Support\NM in the ISO image. Once the NM folder is deleted from your ISO image, burn the image onto a new disc. It will fit onto a 700mb disc. Then proceed with the installation of AutoCAD onto your Windows 7 machine. It worked great for me, but my colleague is still having problems. We suspect it is because he is still using the Beta version of Windows 7 64. I am using the full Windows 7 64 Professional version. We will be getting the full version for my colleague and trying the installation again. Also, my colleague tells me there is a work around to get the express tools installed. Keep checking back, we will be updating as we get new info.
Cheers,
James

I know this is an old thread, but I would really like to install acad2000 on my new laptop.
What does creating the ISO image do for you? I did this and the iso doesn't automatically load or anything. I can try to run the setup copied to the ISO disc, but it does the same thing as the autocad installation disk. I get the error stating it is
not compatible with my version of windows. I'm trying to install acad2000 on a windows7 pro 64bit machine.
Any help on this is greatly appreciated.
Thanks
Jason
Jason ..... obviously you're not the only one reading this after it became an OLD thread!
Go back in this thread (up above, that is) and find the response by -James on Tuesday, January 05, 2010 at 4:58 PM. I'll repeat his instructions here.
1. Open the ISO file with MagicISO.
1B. Look for folder \Support\nm. Remove the "nm" folder.
2. Go ahead and install the software with Full/complete installation. The installation may fail on you near the end.
If it fails....
3. Put your install disc back in the drive (the one you burned, the ISO disc), and choose uninstall from the menu. After it unistalls, reboot your machine.
4. Now put the disc back in again, and redo your full/complete installation. It should work this time. (We have done these steps about 5 times on 2 seperate machines to verify it works because we have many machines that need to transition
at some point...) If it fails a second time, try steps 3-4 again. If it fails a third time, let me know...
Jason, IF you have returned to this forum, from there on you're on your own, unfortunately!
Hope this helps .....

Using Oracle 10g XE on Windows 7 64-bit

After successfully installing Oracle 10g express edition on a windows 7 64-bit system several problems occurred while using it. I like to share the problems I encountered and the solutions I have found.
IE8 problem
When opening the Oracle database homepage in Internet Explorer 8 (IE8) 32-bit version and after login everything works fine except when clicking on the “Object Browser” icon a page not found (HTTP error-404) occurs. With IE8 64-bit the error doesn’t occur. I didn’t found the cause for this, anyone know why?
ODBC problem with Data Source Administrator
The Oracle ODBC driver is located in C:\oraclexe\app\oracle\product\10.2.0\server\BIN\sqora32.dll and is registered as a 32-bit driver. But the default ODBC Data Source Administrator only shows the 64-bit drivers that’s why you don’t see the Oracle ODBC driver in the driver list. The solution is to start the 32-bit version of the ODBC Data Source Administrator. You can find this version in the location %windir%\SysWOW64\odbcad32.exe. The default 64-bit ODBC Data Source Administrator is located in %windir%\system32\odbcad32.exe.
ODBC problem using Access 2003
When trying to use a created ODBC connection in MS Access 2003 an “ORA-12154: TNS:could not resolve the connect identifier specified” error occurs. The cause is that MS Access 2003 is located in Program Files (x86) and this name is in the pad string used in the ODBC connection data. The Oracle TNS can not handle the ( ) used in Program Files (x86). The solution for this is to copy the msaccess.exe file form C:\Program Files (x86)\Microsoft Office\OFFICE11 to a different folder without using ( ) and use that file to start Access.

After configuring XE on Windows 7 , if you are getting a TNS connection error , try the following.
1) In the ODBC connection , enter the TNS service name as localhost:1521/XE , where XE is my service name mentioned in my tnsnames.ora. This should solve the connection issue and can access the database using the sys user id.
Note : Each time you reboot your machine , the following need to be done.
(i) Navigate to C:\oraclexe\app\oracle\product\10.2.0\server\BIN
(ii) Locate the exe file LSNRCTL.EXE and run it with administrator privileges ( right click asn select run as administrator )
(iii) enter stop ( e.g LSNRCTL > stop ) and wait until it is successfully completed
(iv) Turn-off the Wireless ( if ON)
(v) enter start ( e.g LSNRCTL > start ) and wait until it is successfully completed
(vi) Navigate to All Programs --> Oracle Database 10g Express Edition
(vii) Run the "Stop Database" as Administrator and wait for the successfully completed message.
(viii) Turn-on the Wireless and wait for few seconds.
(ix) Navigate to All Programs --> Oracle Database 10g Express Edition
(x) Run the "Stop Database" as Administrator and wait for the successfully completed message.

Blackberry Desktop Software 6.0 & Windows 7 64 Bit, Won't launch after install

Hi, I've been using previous versions of the desktop software before just fine. I updated to Desktop Software 6.0 on my Windows 7 64 Bit machine and the install finishes without any errors.
When I attempt to open it, I get a title bar that says Blackberry Desktop Software but the frame is empty. I can maximize or minimize this box. In the taskbar there is a blackberry software icon.
I've uninstalled and reinstalled the software but it doesn't help. No errors or prompts.
Please assist,
Pavel

I deleted bb desktop icon i do have bb 6.0 software installed second time i am know running cc cleaner i believe my old 5.0 said x86 i don't know but how can we do all these advancements and no pop up just show the 5.0 i believe i got the 6.0 on my other computer i remember it did have to install uninstall a couple of times but i really don't remember put it this way i enjoy this stuff but this is just the open area you know it's right in front of you but you have not seen it and the next guy will walk up and go it's right there don't you see it life is fun you got to just regroup and go at it again sincerely a true novice how do people make all these programs and where are they know when you need them this is the key not a message board i want the source at my finger tip when you excel in this then we will eleviate some suffering in the mean time please explain the message board yes is nice but what you need is mandatory software geek to put answer in here for know problems when he is aware he can put message in here there should already be a tech solution for this in here i typed in bb software desktop 6.0 64-bit windows 7 ultimate on bb solution did not have anything in there know did I type wrong did i not go to right spot to type even so bb needs to adjust to help send customer to right area

Using VISA Resource control with Windows 7 64-bit

Hi.
My company recently upgraded our laptops, and I'm now working on Windows 7 64-bit rather than Windows XP 32-bit. I reinstalled LabVIEW 2009 Base Package, trusting that the Windows 7 64-bit OS would be able to handle LabVIEW 2009 32-bit without problems. But when trying to run our test system, the VISA Resource control doesn't work.
We use it to get a list of the available COM (RS232) ports on the computer. But now the list comes up blank. The only option that comes up in the list, is the text "Refresh". But nothing happens when I press it. Is this a bug in LabVIEW? I've installed the latest patch I found, so now I'm running LabVIEW v9.0f3 (32-bit).
Thanks alot for any and all assistance!
Solved!
Go to Solution.

Sorry for not replying to you earlier. I've been busy on other projects.
I'm not sure what you refer to with MAX, but I'm able to access the com ports using other tools/loggers. So it's not an issue with Windows 7 itself. But it seems logical that the problem would have something to do with running 32-bit drivers on a 64-bit OS. Referring to this list from NI (http://digital.ni.com/public.nsf/allkb/71E9408E6DEAD76C8625760B006B6F98), I'm downloading the 64-bit installer now.
But if I understand it correctly, you cannot run applications from a 64-bit Application Builder on a 32-bit OS. So basically you need the Application Builder installed on both a 32-bit and 64-bit OS to have all bases covered. But in the FAQ, it's asked if it's possible to have both 32-bit and 64-bit LabVIEW 2009 installed on the same 64-bit OS. Why would this be wanted? If you cannot use the 32-bit Application Builder, and you cannot trust that the 32-bit LabVIEW runs successfully (i.e. driver issues etc.), why would you want to have a 32-bit installation on a 64-bit OS?

Cannot use HPM2727nf to scan on Windows 7 64 bit

Running Windows 7 64 bit. Have the HP Universal Driver for 64 bit installed. computer prints fine but whenever I try to scan a document it says "no scanner was detected" but it is an all in one printer and it has a scan function. I have tried using the windows fax and print function on computer and I get the same problem. Does anyone know what it would detect the printer, set it up and work fine for printing but cannot scan?

Running Windows 7 64 bit. Have the HP Universal Driver for 64 bit installed. computer prints fine but whenever I try to scan a document it says "no scanner was detected" but it is an all in one printer and it has a scan function. I have tried using the windows fax and print function on computer and I get the same problem. Does anyone know what it would detect the printer, set it up and work fine for printing but cannot scan?

HOTSYNC PROBLEM SOLVED -between Palm TX using desktop version 6.2 & Windows 7 64 bit

Similar Messages

Maybe you are looking for