Hotsync under Windows 7/32 Problems

I bought a used Lifedrive and habe Problems to sync with Data from a CLIE.
With Outlook a can only sync with a new User. With palm desktop all data on the desktop are erased.
I have a backup of my windows, but what can I do, to use the the data from CLIE?
Sync-Software is 4.414e.
I hope, my explanation ist understandible, because my terrible english;-)
Thank you for any help
Horst

bluetooth connection is incredibly unreliable/intermittent when in Windows (I run Windows 7 64-bit and Boot Camp 4.0, and got both devices connected without any trouble via Bluetooth).
https://discussions.apple.com/thread/4079148
After much testing, I have found the cause of lagging/jumpiness on the Bluetooth Magic Mouse and Magic TrackPad in Boot Camp.
Hopefully this will help others:
The drivers for the Broadcom 802.11n Wireless Adapter have a setting called "Bluetooth Collaboration" that is Disabled by default. Enabling this option removes the problem instantly.
My Magic Trackpad now works flawlessly, even if I stand 6 metres from the machine. It now works just as well as under Mac OS. The setting can be found under:
Control Panel > Device Manager > Network Adapters > Broadcom 802.11n Network Adapter (right click and choose "Properties".
Under the "Advanced" tab, highlight the setting named "Bluetooth Collaboration", then change it to Enable. Then click OK.
I narrowed the problem down to the wireless card by disabling ALL startup services and processes for Windows, then re-enabling one by one.
As soon as I enabled the Windows Wireless Service, the problem came back.
Similarly, disabling the Wireless Card inside the Network and Sharing Center (or Device Manager) removes the problem.
This led me to believe it must be a driver issue with the wireless card, since the problem didn't occur with the Magic TrackPad under Mac OS, or on my mother's Windows 7 64-bit computer.
So when I went into the Driver Properties to check for an update, I found this setting about Bluetooth Collaboration.
All Apple notebooks use the Broadcom card (and have done for years), so this driver is installed for almost anybody using Boot Camp on an Apple notebook. I'd assume this problem would affect anybody using Boot Camp + wifi + a Bluetooth device.
Wireless Connection problem using windows in a Mac.

Similar Messages

Oracle 11 under Windows 2008 installation problems

I cannot make Oracle 11.2.0.1.0 work under Windows 2008. The server's host name is SARABI. Anything of the following takes place on SARABI, no remote access is involved.
The procedure has been as follows...
- Windows 2008 was installed
- Oracle 11.2.0.1.0 was installed
- listener.ora, sqlnet.ora, tnsnames.ora were modified
- no other Oracle configuration file was touched
At this point it worked. I could connect with SQL Plus and with SQL Developer.
Next the server was rebooted. Without having changed anything at all, connecting was impossible. The message is "12514, TNS, listener does not currently know of service requested in connect descriptor". The three configuration files are given below.
Currently, all services are running accoording to Windows Control Panel. There are no entries in the eventlog. Executing "TNSPING SARABI" works fine. Executing "LSNRCTL status" shows "The listener does not support any services" (translated from German "Der Listener unterstützt keine Services"), the full output is given below.
--- LISTENER.ORA ---
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = SARABI)(PORT = 1521))
ADR_BASE_LISTENER = C:\Programme\Oracle\Admin
--- SQLNET.ORA ---
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
SQLNET.AUTHENTICATION_SERVICES= (NTS)
ADR_BASE = C:\Programme\Oracle\Admin\product\11.2.0\dbhome_1\log
--- TNSNAMES.ORA ---
SARABI =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = SARABI)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = ORCL)
--- LSNRCTL status ---
C:\Users\admin>lsnrctl status
LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production on 25-SEP-2010 11:49:24
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Anmeldung bei (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
STATUS des LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 11.2.0.1.0 - Production
Startdatum 25-SEP-2010 11:24:54
Uptime 0 Tage 0 Std. 24 Min. 32 Sek.
Trace-Ebene off
Sicherheit ON: Local OS Authentication
SNMP OFF
Parameterdatei des Listener C:\Programme\Oracle\Admin\product\11.2.0\dbhome_1\network\admin\listener.ora
Log-Datei des Listener c:\programme\oracle\admin\diag\tnslsnr\SARABI\listener\alert\log.xml
Zusammenfassung Listening-Endpunkte...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=SARABI.lionsland.local.de)(PORT=1521)))
Der Listener unterstützt keine Services
Der Befehl wurde erfolgreich ausgeführt.
Michael G. Schneider

Deleting the three configuration files and recreating them with "Net Manager" gives...
--- LISTENER.ora ---
LISTENER =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = SARABI)(PORT = 1521))
ADR_BASE_LISTENER = C:\Programme\Oracle\Admin\product\11.2.0\dbhome_1\log
--- SQLNET.ora ---
NAMES.DIRECTORY_PATH= (TNSNAMES)
ADR_BASE = C:\Programme\Oracle\Admin\product\11.2.0\dbhome_1\log
--- TNSNAMES.ora ---
SARABI =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = SARABI)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = ORCL)
After rebooting the server, the same problems appear. Executing "sqlplus SYS/**** AS SYSDBA" gives "database not started". Then executing startup gives...
ORA-00119: invalid specification for system parameter LOCAL_LISTENER
ORA-00132: syntax error or unresolved network name 'LISTENER_ORCL'
Michael G. Schneider

Instrument I/O assistant isn't installed properly under windows 2000 and xp

after the complete installation of Labview 7express (FDS),the instrument I/O assistant does not work. An error mesage pops up saying that the assistant is not completely installed and that labview 7 should be installed prior to the assistant and that I should reinstall the assistant. I tried to reinstall the I/O assistant directly from the device driver reference CD but it has no effect. What could I do to have the assistant installed correctly ? ( I tried under windows xp same problem)

I forgot the screenshot.
Attachments:
untitled1.gif ‏13 KB

U330p touchpad too few options under Windows

Hey,
I bought my u330p some days ago and can't get my touchpad correctly working under Windows.
The problem that I have is that I want to use a 2-Finger tap as right-click and a 3-finger tap as middle click. I'm using the Elantech driver from the driver site from lenovo, but I had to manually select Elantech because the installer would do nothing.
So I had to go to C:/drivers/Touchpad Driver(Synaptics, Elan)/ELAN
and then install that.
The problem with these drivers is that there is no option for 2-finger tap or 3-finger tap, only clicking.
I'm using Windows 8.1, I also tried the driver under Windows 7 same result.
Then I installed Ubuntu and that worked without a manual driver download. So Is there a way to get the touchpad working like I want it to under Windows? Because there kinda has to be when linux dev's got it working.

I already tried that but sadly it doesn't work. Weirdly enough it isn't even the right driver, because in the device manager it shows as Microsoft PS/2 mouse, but when the driver is correctly installed it should show Lenovo pointing device.
After all that experimenting with my drivers, I can't get back to a working touchpad... Now not even 2 finger scroll works.
Edit: I kinda know why scrolling with 2 fingers doesn't work anymore. The Driver-Software has a yellow triangle with a !
And if I go into the Elan tab under Mouse the device doesn't show up. Has anyone a idea how to atleast go back to where I was?
I tried uninstalling the driver/ or using a earlier version, not the actual Software but the driver itself in the device manager.

Problem with wi fi under windows 8.1

my macbook pro late 2013 wi fi card is not working under windows 8.1 can't access any network , any one having sam e problem ???

Hi printen,
Welcome to the HP Forums.
If you are having an issue with connecting the printer to the computer over a wireless connection with the HP software, I suggest you disable any firewalls or anti virus protection before doing the installation.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Problems with saving a html webpage under windows 7

Hello people,
Ik have the next problem. When I an webpage witch I have made for instanse webpage.html open and I change something in it en I wanna save this changes in my webpage I get the next message (maybe the translation is not the right one) An error occurred while accessing E:\users\name\websites\MFC936D.tmp.
This tmp file has every time a different name. The site is not saved (webpage.html) but the html page disapeares when I click the eroor message away. And the tmp file displays in the map where the files are being saved.
My dreamweaver cs4 runs under windows 7
I hope someone can help me.
Thanks a lot.
Bart

E: is another partition were I save my data too.
The file is maybe read only you say. But 2 things sometimes it saves right after I have tried it a few times. And second I have started dreamweaver with administration rights, so you think he has all the rights. But the sme thng happened.

I have an old Mac G5 with OSX 10.5.8 After a crash of my HD, I reinstalled the CS3. At the time of recording I get a window with the message "COMPLETED REGISTRATION" and under "There was a problem sending the informasioni via internet" and still under th

I have an old Mac G5 with OSX 10.5.8
After a crash of my HD, I reinstalled the CS3.
At the time of recording I get a window with the message "COMPLETED REGISTRATION" and under "There was a problem sending the informasioni via internet" and still under three choices to "send back" and "records in a second time "or" never record "and I continue to choose the latter option.
Another problem is that in Bridge (version 2.0.0.975) I can no longer see thumbnails of RAW files from my Canon 40D that I saw before.
Should I upgrade ACR? which is the latest version supported on my Mac?
thank you

Sergio Bellotto if you keep receiving the registration screen then please try accepting the screen in a different User account.

How can I get a better driver for my 1394b Hostcontroller in my Macbook pro 2010 to solve the problem, that it is too slow under Windows 7 installed with bootcamp ?

How can I get a better driver for my 1394b Hostcontroller in my Macbook pro 2010 to solve the problem, that it is too slow under Windows 7 installed with bootcamp ?
WIndows can't find a better one than the installed LSI Conformed 1394 Hostcontroller

Read and follow the Bootcamp Installation instructions that you were offered to view when you ran Bootcamp Assistant.
Run Bootcamp Assistant again and select the option to download the Bootcamp Support software. Follow the instructions. Then boot into Windows and install the Windows Support software you downloaded and saved.

Joystick problem in DOS Shell under Windows XP

(I had previously posted this in another forum on the Internet, copy 'n' pasted here to save me a bit of typing) I can't seem to to get my joysticks and/or gamepads functioning in a DOS shell under Windows XP. Initially I was trying to run Death Rally under 'DOSBox', and couldn't get the game to recognize my Gravis Gamepad. At first I thought the problem might be with DOSBox, but then realized that the gamepad wasn't recognized under a simple DOS shell as well. I have a P4 2.66ghz CPU, running Windows XP Pro w/SP2, with a Sound Blaster Li've Value CT4780 that has a standard gameport on it. I can calibrate the gamepad within Windows XP and it appears to be working fine (my MIDI keyboard works fine as well, it uses the gameport of the sound card too). In a DOS shell (as well as under DOSBox), the gamepad isn't recognized at all. I tried several DOS games (e.g. DOOM/Duke 3D/Death Rally/Stargunner/etc...), as well as a little QBasic joystick tester that I had whipped together years ago... no dice, the gamepad isn't recognized under DOS (or DOSBox); even though in Windows XP (in the 'Game Controllers' applet in the control panel) it works just fine. Windows games work fine with the gamepad, but nada in a DOS shell or DOSBox. Note that I had never previously checked if the gameport and/or joysticks were working on this PC under DOS, I just discovered it the other day. Any ideas? Any help would be much appreciated (edit) P.S. One thing that I just tried: I booted from a flash dri've to W98 DOS and loaded the SBLi've DOS drivers. The gameport/gamepad works fine like this (with my JoyTest utility, as well as the gameport being reported in MSD). So, I'm sure that the gameport and gamepad is woking under nati've DOS, it simply isn't recognized in a DOS shell under Windows XP. ('nuther edit) In Windows' device manager, the gameport is listed as 'Creative Game Port', with I/O address of DF08-DF0F. The 'Use automatic settings' checkbox and 'Change setting' button is grayed out, so's I can't piddle with those settings. In the old(er) DOS/W9x days (with standard non-PNP hardware) the standard gameport address was (what was it's) 200 (maybe 20?). Could this be the problem, that the Creative Game Port I/O address is set for an obscure address (that I can't seem to change)? Maybe there is a way to change it to a standard setting? 7

thank you very much

21.5" iMac brightness problem under Windows 7

Even at lowest possible brightness under Windows 7,
this is much too bright for working in the evening/night.
I was using VistaShades under Vista, but now under Windows 7
VistaShades only darkens the background!
Does anyone know another program for reducing the brightness
which is Windows 7 compatible?
Thanks!
(BTW: I have the same problem using my 24" iMac under Windows 7
see http://discussions.apple.com/thread.jspa?threadID=2358779&tstart=0)

I has the same problem so i called a friend and all he did was go to navida's web site and download the beta drivers for gforce go 7600. make sure it is for windows 7. the ones on HP's website does not work and you can not use auto detect drivers when finding the driver.

I have problems installing update for PS Elements 9 under Windows 8.1. Are any problems known?

I have problems installing update for PS Elements 9 under Windows 8.1. Are any problems known?

Nobody can tell you anything without proper technical details. There is no point whatsoever in throwing around generalized assumptions without having exact error messages and so on.
Mylenium

Still problems with Toshiba Bluetooth Adapter under Windows 7

Hey there, it's me once again.
I refer to my thread "Bluetooth Problem under Windows 7":
I thought after the solution from bluecat my problem was solved. But it's not really.
After installing the Windows Hotfix, it worked just shortly. But now the problem is the same.
When I delete the Toshiba Bluetooth Stack and try to work with the Windows Bluetooth Manager, I see, that the Bluetooth icon is coming an going on the task bar. In device manager I said Windows, that it doesn't shut down the device to save energy. But I think the device is turned on and off and on and off...
I really have absolutely no idea what the problem is, but I am becoming terribly angry.
Details:
Windows 7
Dell Wireless Bluetooth Internal Adapter 350 (but it's made by Toshiba)
Drivers tried out: Vista Profile Pack from Dell Homepage (no stack installed, just driver) / Toshiba Bluetooth Stack (the latest version)
This is the old Thread:
Dear all
Just as I installed Windows 7, my Bluetooth mouse and keyboard don't work fine.
I use the Dell Wireless 350 Bluetooth Internal Adapter, Logitech MX1000 mouse and keyboard and Toshiba Bluetooth Stack 8.00.02.
To connect the devices with my Computer, I firstly must disconnect the Bluetooth adapter by pushing Fn + F2 on my Dell i9400, after re-connecting I can search and connect the devices correctly. They work fine as long as the notebook is running.
After rebooting the notebook, the devices don't work anymore. They are still listed in Bluetooth Stack as known, but not as connected. Therefore I have to disconnect the Bluetooth adapter another time and re-connect it to be able to connect the two devices.
I firstly thought, that it's a Windows problem. I thought that Windows is able to put down the adapter to save some energy. But when I go to the Device Manager, there is no box for this option as known from other devices (f.e. USB-Ports). So this is not the problem. I think the problem is something else, maybe done by the Bluetooth Stack.
Under Windows XP this all worked perfectly. I used the same hardware and also the Bluetooth Stack by Toshiba (downloaded on the Dell Homepage).
Anyone some ideas?
Thanks!
Daevu

Hey there
Yesterday I made Format C: and installed Windows 7 new.
I did not install any bluetooth driver for my Dell Wireless 350 Bluetooth Adapter (made by Toshiba).
And now: The mouse and the keyboard are working. I even do not see them anywhere in my system, but they are working.
There is no bluetooth adapter in my device manager and I had not to connect the mouse and the keyboard with my computer. It's simply working without doing anything.
I don't understand this...
Is this a save connection?
What I've tried already:
-> Installing newest Bluetooth Stack from Toshiba. Problem seen in the message above. I also installed the MS Hotfix. Same problem.
-> Installing "Vista Profile Pack" from Dell Homepage, recommended for my notebook and Windows Vista. There is no stack installed. So I had to connect the mouse and keyboard via Windows Bluetooth Manager. But the adapter was made on and off by windows, the icon in the taskbar came and went and came and went. Connection is 1 minute good, then some seconds away. Not possible to work with the mouse.
And now without installing any driver it's working. Am I stupid?
Daevu

Applet running problem in ie 6.0 under Windows XP

Applet running problem in ie 6.0 under Windows XP
I have a PC running Iternet Explorer 6.0 running under Windows XP. I have developed an applet using JDK 1.3 which is running fine with applet viewer , but it is not running in ie. I have installed Netscape navigator and Opera 5. the applet is running fine in both of these browsers but somehow it is not running in IE.
Later on I upgraded my JDK to 1.4. It also displays use Java2 (V1.4.1) for <applet> (requires restart) tck marked in Advance section under Tools-Options menu of IE.
I have also tried and set various options in my Control Panel�s Java Plug-in but all in vain. I have searched the sites for this solution but no one answers specifically.
I know it�s a small problem due to discarded JVM in IE under Windows XP but give me solution for that.
Thanks in Advance
[email protected]

Dear I have the same problem .
Applet running problem in 6.0 . Enen I have installed the latest Jre 1.5.
What should I do. I am fedup with this problem.

Problems with serial visa under windows XP

I used VISA to control serial (RS232) instruments under windows 2000 and it was working well.
Now I want to use the same program under Windows XP and I can't even open a VISA session, or use VISA Write. I get an error : the resource is available but VISA can't reach it.
What could be the problem ?
Thank you in advance for your help

gg09 wrote:
> I used VISA to control serial (RS232) instruments under windows 2000
> and it was working well.
> Now I want to use the same program under Windows XP and I can't even
> open a VISA session, or use VISA Write. I get an error : the resource
> is available but VISA can't reach it.
> What could be the problem ?
Someone else is probably openening that COM port already. Possible
culprits: Configured Modems, UPS drivers, even Printer drivers although
serial printers are seldom nowadays. You will have to search your
Windows configuration for possible other applications reserving that
port for themself.
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

FAQ: Fix for Problem Printing PostScript "to file" Under Windows 2000

PROBLEM
A number of Acrobat users under Windows 2000 have reported a problem in which printing via the PostScript driver fails when printing "to file" instead of to a standard printer port (such an LPT, USB, TCP/IP port, or even Acrobat's internal port). Printing "to file" refers to the ability to check an option in programs such as FrameMaker or Microsoft Word that causes the PostScript that would have gone to a "real" printer port, to go to a specified file name, prompted for by the driver or application itself. The symptom of the failure may be either (1) no file produced and/or (2) a nondescript error message about "unable to print."
Although we have not yet heard of this problem occurring under Windows XP, we have no reason to believe it couldn't given the extreme similarity in architecture and software components. If you are seeing this with Windows XP, please advise me of this via email and simply substitute "Windows XP" for "Windows 2000" for your purposes in this posting.
CAUSE
The problem is caused by a missing printing port named "FILE:" used by the driver whenever it, guess what, prints "to file." This port is automatically created when Windows 2000 is installed and normally would never disappear. What seems to be happening, based upon reports that I have received from several end users, is that under some conditions yet unidentified, uninstalling one version of Acrobat in preparation for installation of another (newer) version of Acrobat causes the "FILE:" port to be deleted from the system. This printing port deletion does not appear to be caused by any end-user error.
Adobe's Acrobat Quality Assurance group has been alerted to the problem, but to date has been unable to internally reproduce the problem. We would appreciate any information from any user who encounters this problem in terms of exactly how the Acrobat Distiller printer instance was being used prior to an uninstall of Acrobat (for example, were you printing a FrameMaker book "to file" with the
Acrobat Distiller printer instance for purposes of subsequently distilling the whole book manually?)
FIX
Fortunately, it is very easy to add the "FILE:" port back into the operating system:
(1) Logon to Windows 2000 as a user with Administrator privileges.
(2) Go to Start=>Settings=>Printers.
(3) Select File=>Server Properties.
(4) Click the "Ports" tab.
(5) Click "Add Port".
(6) Select "Local Port" and click "New Port".
(7) In response to "Enter a port name:" respond "FILE:" (without the surrounding quote marks, of course) and click OK.
(8) The "FILE:" port should now be in the list of available ports. You may close the remaining dialogs.
At this point, printing "to file" should work correctly. Most likely, you will not see the problem reoccur unless you do another round of uninstalls of Acrobat.
- Dov

You need to download and install the ADPDF9.PPD printer description and use it instead of Device Independent.

Hotsync under Windows 7/32 Problems

Similar Messages

Maybe you are looking for