Hotsyncing a palm centro using a bluetooth adapter and windows vista 64 bit

Please help. I have read and followed all of the other suggestions on this forum and nothing has worked.
I have a palm treo. When I try to hotsync using the bluetooth adapter, it gives me a message stating:
"unable to connect,port is being used by another application".
I have rebooted, soft reset, etc. and still get the same message.
I do not know how to set up another port on the windows vista program. That was one suggestion.
I have selected both bluetooth and serial port under the hot sync manager.
Nothing works.
Any help is greatly appreciated.
thanks
Post relates to: Centro (AT&T)

Hello akashmedehrotra and welcome to the community.....
Windows Vista 64 bit is only sync with a wireless connection. Either Bluetooth or Infra Red. The M515 does not have bluetooth, so you would have to purchase an IR Dongle and sync using Infra Red. You won't be able to sync with the USB cable on your desktop.
Colapop

Similar Messages

HELP! I am in ACT 2007, Palm Centro 6.2, Companion Link and Windows Vista Syncronizing He...

I mostly blame ACT. I have 2007 and they reccomended ANY Palm. After purchasing my new Palm Centro I purchased and downloaded the ACT synchonizing program. Upon download, it said they weren't compatible. I called ACT who then said they knew exactly what I needed. A third party software called Companion Link. I purchased that from ACT. When downloading, it says it is not compatable with anything over 6.0 ..I called them. They said I can dowload the older Palm Desktop and it would work. Before I do one more thing....I want to be sure I shouldn't start completely over. I am still inside the 30 days with my Centro, which I like, but everything I need for work is on my ACT so synchronizing with that is most important. If I have to purchase ACT 2008 I will but if I can find a fix (maybe Palm OS desktop) first then I will try that. At this point, if I could move everything away from ACT I would consider that as well. I have just used it for so long to tract contacts, etc. I don't use too much of the fancy stuff. Did I mention I am on Windows vista as well. I'm sure that's one more thing to consider. I am two weeks and several hundred dollars down. HELP
Post relates to: Centro (AT&T)

Welcome to the Palm Forums,
Ok, thanks for all that information. First off if you sync to a lower version of Palm Desktop you will not be able to sync programs over to your device. And if you are able to it works part of the time not all the time. Also what was your other device before you moved to the Centro? We might be able to grab the information from that device (if you still have it) and move it to the Centro depending on the device type.
Outside of that there are others here that could help you with the ACT and Companion Link applications but unfortunately I don't know much about how those programs work. But if you want to move away from them message back here and I will help you.
Post relates to: Palm Z22

Still problems with Toshiba Bluetooth Adapter under Windows 7

Hey there, it's me once again.
I refer to my thread "Bluetooth Problem under Windows 7":
I thought after the solution from bluecat my problem was solved. But it's not really.
After installing the Windows Hotfix, it worked just shortly. But now the problem is the same.
When I delete the Toshiba Bluetooth Stack and try to work with the Windows Bluetooth Manager, I see, that the Bluetooth icon is coming an going on the task bar. In device manager I said Windows, that it doesn't shut down the device to save energy. But I think the device is turned on and off and on and off...
I really have absolutely no idea what the problem is, but I am becoming terribly angry.
Details:
Windows 7
Dell Wireless Bluetooth Internal Adapter 350 (but it's made by Toshiba)
Drivers tried out: Vista Profile Pack from Dell Homepage (no stack installed, just driver) / Toshiba Bluetooth Stack (the latest version)
This is the old Thread:
Dear all
Just as I installed Windows 7, my Bluetooth mouse and keyboard don't work fine.
I use the Dell Wireless 350 Bluetooth Internal Adapter, Logitech MX1000 mouse and keyboard and Toshiba Bluetooth Stack 8.00.02.
To connect the devices with my Computer, I firstly must disconnect the Bluetooth adapter by pushing Fn + F2 on my Dell i9400, after re-connecting I can search and connect the devices correctly. They work fine as long as the notebook is running.
After rebooting the notebook, the devices don't work anymore. They are still listed in Bluetooth Stack as known, but not as connected. Therefore I have to disconnect the Bluetooth adapter another time and re-connect it to be able to connect the two devices.
I firstly thought, that it's a Windows problem. I thought that Windows is able to put down the adapter to save some energy. But when I go to the Device Manager, there is no box for this option as known from other devices (f.e. USB-Ports). So this is not the problem. I think the problem is something else, maybe done by the Bluetooth Stack.
Under Windows XP this all worked perfectly. I used the same hardware and also the Bluetooth Stack by Toshiba (downloaded on the Dell Homepage).
Anyone some ideas?
Thanks!
Daevu

Hey there
Yesterday I made Format C: and installed Windows 7 new.
I did not install any bluetooth driver for my Dell Wireless 350 Bluetooth Adapter (made by Toshiba).
And now: The mouse and the keyboard are working. I even do not see them anywhere in my system, but they are working.
There is no bluetooth adapter in my device manager and I had not to connect the mouse and the keyboard with my computer. It's simply working without doing anything.
I don't understand this...
Is this a save connection?
What I've tried already:
-> Installing newest Bluetooth Stack from Toshiba. Problem seen in the message above. I also installed the MS Hotfix. Same problem.
-> Installing "Vista Profile Pack" from Dell Homepage, recommended for my notebook and Windows Vista. There is no stack installed. So I had to connect the mouse and keyboard via Windows Bluetooth Manager. But the adapter was made on and off by windows, the icon in the taskbar came and went and came and went. Connection is 1 minute good, then some seconds away. Not possible to work with the mouse.
And now without installing any driver it's working. Am I stupid?
Daevu

Ralink bluetooth adapter and wifi driver missing for HP ENVY 15-j101ex Notebook PC (ENERGY STAR)

hello theres a problem connecting my laptop with any wifi networks for a long time now. the problem comes and goes. i cant connect it with any available networks or cant detect them at times. i would like to re-install the ralink bluetooth adapter and wifi driver as i had uninstalled them. where can i get it? please help me out. its been missing for weeks now. also i cant transfer or receive any files because the ralink bluetooth adapter is missing. kindly reply asap. thank you so much.

Hi ,
Thank you for visiting the HP Support Forums and Welcome. It is a great site for information and questions. I have looked into your issue about your HP ENVY 15-j101ex Notebook and issues with the Wireless drivers. Here is a link to your driver page. Here is a link for troubleshooting the Wireless connection. I would use the section on The Windows 8 Network and Internet Troubleshooter. Here is a link that will show you how to connect a Bluetooth device to your Notebook. Hope this helps you connect. Thanks.

If you are traveling in Europe, do you need both an adapter AND a voltage regulator to charge the IPad2 and the iphone? Or, the reverse, will it hurt either if I use both the adapter AND the voltage convertor?

If you are traveling in Europe, do you need both an adapter AND a voltage convertoro charge the IPad2 and the iphone? Or, the reverse, will it hurt either if I use both the adapter AND the voltage convertor?

You may only need adapters for the different kind of sockets, depending of the country you want to travel. A voltage converter is not needed.
The Apple power units are multi voltage devices, supporting a range from 110 V to 240 V. as you can see on the labels. O.K. for most of the labels you need a magnifier, but its on them.
Have a pleasnt journey
Lupunus

Sending plain request to web service using receiver sender adapter and PI and expecting as attachment as response

Hi
In my scenario,we are sending plain request to web service using receiver sender adapter and PI will receive response as excel attachment. What are standard module required to achieve this and sequence? or checking Keep attachment box will help us to achieve this?
is it possible to receive excel sheet as attachment from receiver soap adapter ?
Thanks in Advance

Hi,
This issue might be due to the invalid .pem certificate file.
Make sure to include the beginning and end tags on each certificate.
The result should look like this:
-----BEGIN CERTIFICATE-----
(Your Primary SSL certificate: your_domain_name.crt)
-----END CERTIFICATE-----
-----BEGIN CERTIFICATE-----
(Your Intermediate certificate: DigiCertCA.crt)
-----END CERTIFICATE-----
For more detailed information, you could refer to:
https://www.digicert.com/ssl-support/pem-ssl-creation.htm
Regards

Nano 6th generation I attached the motorola D650 bluetooth adapter and it says unsupported device... Any suggestions?

Nano 6th generation and i connected the motorola D650 bluetooth adapter and it says unsupported device? Any suggestions, this should work as Apple told me it would and instruction manual for headphones specifically mentioned Ipod.
Thanks

I've heard that there are some Ipod adapters out that will work with this trick but it would be nice if anyone knew a way to make this adapter work. I think it is a popular trick since the adapter from oakley that does work is now on back order.

Palm TX and Windows Vista

Is there third-party software that will enable one to connect the Palm TX to a PC operating under Windows Vista? If so, has anyone had experience, good or bad, with it?
Post relates to: Palm TX

Thank you both for your helpful comments. I am moving along, albeit at a snail’s pace and I need some clarification on a couple of points.
My machine has the Vista 64bit operating system, but it does not have bluetooth capability, so I understand that I need to purchase a D-Link Bluetooth adapter. I find that there are two models. Is the DBT 120 D-Link adequate or do I need the DBT 122 D-Link adapter?
I currently have Palm Desktop 4.2 on my computer. When I loaded Palm Desktop 6.2 I found that it erased my calendar and my address book. I had both backed up, but I didn’t even need the backup. When I uninstalled 6.2 and reloaded 4.2 from my Palm disk, both strangely reappeared. However, how can I load and keep 6.2 without losing my calendar and address book?
Thanks again.
Post relates to: Palm TX
Post relates to: Palm TX

Bluetooth connection to Windows Vista

I tried to connect the iphone 3 G S via bluetooth to my windows Vista Laptop, for wireless sync. On the driver install, one bluetooth part>> bluetooth periphal device << can not be installed<<<. No update is avaialable from Windows. Does anyone know how to fix this?

The iPhone does not support anything higher than A2DP headset protocol (cellular to headset). It does not support BT<->PC protocol or BT<->Car/GPS Device Bluetooth Protocols.
Some phones do have this protocol from more popular brands like Sony Erricson or Motorola cellulars. You can use TomTom's "What phones can be supported with my GPS device?" section that has a list of phones that can do traffic report data streaming and phone contact lookup with voice control.

Palm maim and windows Vista

I have Palm M500 and window vista 32. I downloaded 6.2 because I lost the software. Will not syronize(sp). Do I need to download a driver.
Post relates to: Palm m500

Your question is frequently asked and answered in the Windows Hotsync board. You need to download PalmHotsyncSetup from www.pimlicosoftware.com
smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android

I am using MS Office 2010 and Windows XP Professional, can I use iCloud for backup of my files and documents?

I am using MS Office 2010 and Windows XP Professional, can I use iCloud for backup of my files and documents? I am planning to transition to a Mac so using the iCloud seems to make the most sence.

No, it is not a backup method at all. If you delete a sync'd file on any device, you delete it permanently from iCloud. That by its very essence is not a backup solution therefore. A backup solution does not automatically and simultaneiously delete the file everywhere when it is deleted from the original source.
iCloud is strictly a syncronization tool for using files on multiple internet connected devices.

Deploy Visual Basic 6.0 RDC application using Crystal Reports 9 on Windows Vista

Post Author: albe
CA Forum: General
When attempting to deploy a Visual Basic 6.0 Report Designer Component (RDC) application using Crystal Reports 9 on Windows Vista systems, the application fails after the first print or preview (that show normally) and an error occurred: -2147417848 Method '' of object '' failed.
The app use the RDC and Active Data; I verify that the problem is encountered when the app calls the 'SetDataSource' method.
I tried everything that came in my mind: reinstalling it a few times, with administrator priviledges, disabling uac, manually registering dlls, ...
I hope that this will be fixed, since Crystal Report 9 is the last CR version compatible with windows 98.
thanks in advance,
Alberto

Hello,
This forum is for community use and is not considered a support site. For assistance you need to purchase a case from our support site. But 9 is no longer a supported version so this is your only place to get assistance.
Try downloading the only patches available from:
ftp://ftp1.businessobjects.com/outgoing/CHF/cr90actxwin_en.zip
ftp://ftp1.businessobjects.com/outgoing/CHF/cr90dbexwin_en.zip
ftp://ftp1.businessobjects.com/outgoing/CHF/cr90devwin_en.zip
ftp://ftp1.businessobjects.com/outgoing/CHF/cr90mainwin_en.zip
Thank you
Don

I set up a playlist in itunes and when i tried to sync it to my iphone i get an error message "itunes could not copy "x" to the iphone "x" because a timeout error occured. Using itunes 10.5.2.11 and Windows Vista 64

I set up a playlist in itunes and when I try so sync it to my iphone, I get an error message "itunes could not copy "x" to the iphone "x" because a timeout error occurred. Using itunes 10.5.2.11 and Windows Vista 64. Any help? Thanks in advance!

I have the same question and the only reply I've found on the forum was "change the USB hub", which HASN'T worked. So I am accepting new suggestions. Tks!

HT1178 Can the time capsule be used with a pc running Windows Vista , 7 or 8 as a backup drive

Can the time capsule be used with a pc running Windows Vista , 7 or 8 as a backup drive. If so what software do I need to buy?

Can the time capsule be used with a pc running Windows Vista , 7 or 8 as a backup drive.
Yes, on XP, Vista and 7. Have not tried 8.
If so what software do I need to buy?
Genie Timeline Pro does a very nice job...and it is similar to Apple's Time Machine. It's not cheap though. Check with the Genie folks for more info and compatibility with Windows 8.
Genie Timeline Pro | Overview | Time Machine Backup Software for ...
Other users may have some other suggestions.

I'm using photoshop elements 2.0 and window vista. when i want to crop i cannot enter any values in

I'm using photoshop elements 2.0 and window vista. when i want to crop i cannot enter any values in the width and height boxes. the cursor won't enter. same thing with resolution. what did i do? what's wrong?

The first thing you might try is resetting the Crop Tool by right clicking on the crop icon in the tool options bar and choosing Reset Tool.
If that doesn't work then the next thing is to reset the photoshop elements 2 settings file by holding down
the Shift+Ctrl+Alt keys just after clicking or double clicking on the pse 2 shortcut.
Keep holding the keys until a dialog appears ask if you want to delete the photoshop elements settings file
and click yes in the dialog.

Hotsyncing a palm centro using a bluetooth adapter and windows vista 64 bit

Similar Messages

Maybe you are looking for