Hourly rate entered in the amount field of IT0008 calculate wrongly in RT

Hi All,
Hourly rate 9.52 entered in the amount field of IT0008. The system calculate /250 salary summary as 9.52 in the Result Table RT.
Kindly advise on what to configure so that it will calculate correct basic salary in RT.
Regards
Vince

9.52 is the RTE in Infotype 008
Generally , amount will be maintained and that amount will be divided with number of hours and you will get Salary per day
in your case maintain RTE as 9.52 in IT08
and in PCR x013... for Grouping 3 Specification 5....... instead of RTE=TSDIVP maintain RTE*TSDIVP and remove DIVID ARR and check the out put once

Similar Messages

Commands that can be entered in the 'Command Field'

Hello All,
Does anyone know all commands that can be entered in the 'Command Field'.
I am interested in the commands that start with &. For example &sapedit, &vexcel, &vgrid; etc. (OR commands such as PRFB; etc.)
Just curious, where all these commands are stored?
Thanks
Naved

Hi Nablan,
I tried your suggestion. I noticed that it lists some commands but not all.
Foe example, if I am in CMOD tcode; I clicked on GUI Status but nowhere I saw Command 'PRFB'.
According to a post in SDN, in CMOD tcode; by entering PRFB in the command field a list of all field exits are displayed.
Similary, in SE16n; there are field commands like &sapedit, &vexcel and &vgrid...
Please shed light on this,
Thanks

Data entered in the custom field in the SRM portal not getting saved..

Hi Experts,
I have added a custom field in Contract Screen of the SRM portal by adding the field as an append structutre in structure INCL_EEW_PD_HEADER_CSF_CTR.
The custom field now appears in the header (basic data ) of the 'Process contract' screen.
NOw It allows me to enter data in the custom field .
The problem is ..
When I 'CHECK' or "RELEASE' the contract, the value entered in the custom field disappears..
How do i capture the data entered in the custom field ...please HElp!!!
Thanks in Advance.
Vidya

Hi Pradeep,
Thanks for the reply!!
We have upgraded our SRM system from 3.0 to 5.5
I have added the custom field in structures INCL_EEW_PD_HEADER_CSF_CTR and
INCL_EEW_PD_HEADER_CSF as the field has to appear in the basic data tab of 'Process Contract'.
Regarding debugging:
1. I tried to debug in BBP_DOC_CHECK_BADI by calling the FM BBP_PD_CTR_GETDETAIL. inside the badi and the parameter e_header of the function module contained the custom field but had no value...!!
2. I tried to debug the badi BBP_CUF_BADI_2 method MODIFY_INPUT..
The import variable iv_fieldname contains the field name amd the variable iv_value has the value entered in the custom field .........but another import structure ls_header also contains the custom field but no value....
Method MODIFY_INPUT has only one export parameter ev_value,,,,,,,,,,,,,,,,!!!!!!!!!!!!
Edited by: vidya vidya on Apr 24, 2009 6:06 PM

How to club the amount field for the particular customer from file

Hi ,
In my BDC i am getting the Amount field which is need to be put in the Header data . For 1 Customer there are more than 5 line in amount field in the Excel file.
For the Particular Customer , I need to club all the amount ffield and put it into the Heade data for the customer.
How to do this .
Thanks

got answer

How make display only the amount field in table control(infotype 0008)

Dear Freinds,
have to make display only the amount field (Q0008-bet01) on table control in infotype 0008 , could you tell me how to make it display only.
i have tried the below coding it is not working in PBO & PAI of the user exit
ZXPADU01 and ZXPADU02. For the table control is there any othe method??
       loop at screen.
           screen-name = 'WA_P0008-BET01'.
          screen-input = 0.
          screen-output = 1.
          modify screen.
      endloop.
i have tried like this as well
       loop at screen.
           screen-name = 'Q0008-BET01'.
          screen-input = 0.
          screen-output = 1.
          modify screen.
      endloop.
in the both the above methods it is not working. Could any one plese suggest me how to make display only the amount field in infotype 0008.
regards
syamla

Dear Freinds,
have to make display only the amount field (Q0008-bet01) on table control in infotype 0008 , could you tell me how to make it display only.
i have tried the below coding it is not working in PBO & PAI of the user exit
ZXPADU01 and ZXPADU02. For the table control is there any othe method??
       loop at screen.
           screen-name = 'WA_P0008-BET01'.
          screen-input = 0.
          screen-output = 1.
          modify screen.
      endloop.
i have tried like this as well
       loop at screen.
           screen-name = 'Q0008-BET01'.
          screen-input = 0.
          screen-output = 1.
          modify screen.
      endloop.
in the both the above methods it is not working. Could any one plese suggest me how to make display only the amount field in infotype 0008.
regards
syamla

How to supress sign after the amount field

Hi All,
How to suppress the sign after the amount field is it using only no-sign or any other ways are there for doing that?
Regards
Mahesh

Hi,
Please use the Variable type BSEG-DMBTR, which does not support any sign. <REMOVED BY MODERATOR>
Edited by: Alvaro Tejada Galindo on Feb 20, 2008 2:07 PM

Put comma in the amount field

Hi Experts,
I need to put the comma in the amount field.
eg: 3000.00 as 3,000.00.
Is there any FM which can do this conversion.
Thanks In Advance
Asish

The best way is type casting.
Ex:
Data: amount(10) Type p decimals 2.
Value = '3000'.
WRITE VALUE TO amount.
Write amount. "3,000
Close the thread once your question is answered.
Regards,
SaiRam

I would make the signature field read only until something is entered in the mandatory fields.

I would make the signature field read only until something is entered in the mandatory fields.

Mina,
You can use LiveCycle Designer's Action Builder to easily achieve this.
Please go through online documentation for the specific version of LiveCycle Designer that you are using.
It is intuitive and very easy to use Action Builder (You will find this option under Tools Menu item of Designer).
--Santosh

Known limit for how many characters can be entered in the To field when adding People and Groups ?

I am running MOSS 2007 SP1. I browse to site settings > People and groups and a group which has more than 60 members. I select all > Click Actions > Email Users. Nothing happens. I select less users, new outlook window comes up as it should. I am running outlook 2007. I first thought that the limit was 50 users, but different user selections let me select 51 users as well. I then concentrated on the character limit and I noticed that there were about 1580 characters in the To field when I selected 50/51 users.
Is there a known limit in sharepoint/outlook client for this function on how many characters can be entered in the To field?

Hello Amar,
This is a by-design behavior, not from SharePoint side, but Internet Explorer. The limitation by the 2083 characters in IE for the Max URL length is described in the following KB article:
(KB208427) Maximum URL length is 2,083 characters in Internet Explorer
http://support.microsoft.com/default.aspx?scid=kb;EN-US;208427
As a workaround, you may need to divide the list up and not send all the email at the same time. Hope it helps!
Best Regards,
Lionel

Regardin the commas appearing in the amount field

Hi all,
I have zfield which is of type CURR16 in a ztable. So this stores the amount in the form of 30,00,000.00 i.e, it is displayed wth comma's for the amount field.
Now i need to fetch this amount field into a particular cell in the webdynpro component. The amount is being fetched correctly but the comma's are not being displayed(3000000.00) in the Webdynpro component. This cell is declared as CHAR10. Can any one suggest like how to make this cell displayed with comma's.
Regards,
Kalyan Chakravarthi.M

Hi
Declare the cell with the same dataelement which you used for the zfield instead of char10.
Regards
Tamil

HT201487 i have a problem with xcode programming app when i lunch to it it asking me to enter my password and when i enter it the program show that it is wrong but am 100% sure it's wright so please help me with this issue thanks

i have a problem with xcode programming app when i lunch to it it asking me to enter my password and when i enter it the program show that it is wrong but am 100% sure it's wright so please help me with this issue thanks

That's not very intuitive
Check your mail server setup (mail>preferences>accounts>) choose your MobileMe account and select Outgoing Mail Server (SMTP) dropdown box, select Edit SMTP server list, verify that each instance of the me server has a password, if there are more than one and you only have one account then delete the one without a password.

How to maintain the amount field format after GUI_DOWNLOAD

Hi everyone.
I have this problem on my object.
The format of field ERFMG in table AUFM is 3.921,569.
After I SELECT it INTO an internal table it becomes like this 3921.569
I would display this internal table in ALV and its ok. Its format is 3.921,569 The format is also not changed when I download it into an excel file using LIST -> EXPORT -> LOCAL FILE -> SPREADSHEET.
However my program should automatically download to local if the user tick a checkbox in the selection-screen. It will use function module GUI_DOWNLOAD. When this is used, the format of ERFMG changes to 3921.569 again, since it is using my declared internal table.
How will I use GUI_DOWNLOAD without changing the format of amount fields like ERFMG? What are my other options to do this?
The Decimal Notation in my User Profile is already set to 1.234.567,89
Thank you in advance.

Hi Cris,
To get the output in the user format for the decimals, try the following code.
data: wg_dec(7) type p decimals 2.
data: wg_dcp type usr01-dcpfm.
data: wg_dec_str(10) type c.
wg_dec = '111135.67'.
select single dcpfm from usr01
into wg_dcp
where bname = sy-uname.
move wg_dec to wg_dec_str.
if wg_dcp ne 'X'.
replace all occurrences of '.' in wg_dec_str with ',' .
endif .
write:/ wg_dec, wg_dec_str.
I dont feel there is any other option where you can change the decimals format as per the user profile.
While giving the output of decimal values in a list, the system automatically displays it in the profile set by the user.
This code will help you to set the decimal value as '.' or ',' as per the user profile.
Note: It wont add the unit separator for hundreds and thousands. Again you have to do that manually.
Hope this proves of some help to you.
Regards,
Pulkit

Populating parts of form based on Value entered in the first field

Hello,
I am trying to create a form, where user will enter the serial number of his equipment and I want him to click a verify button next to it.Upon clicking the verify button I want the Item Description field of the form to be updated ( this info is pulled from a backend MySql DB).Also, the text fields corresponding to the Equipment Site to be populated.After checking all the info, user should be able to click a submit button at the end of form and this information should be written to another table.I attached a Insert record server behaviour to form.Essentially, I want to attach a different action to both buttons on the form.In my view this is same a when we fill those registration form and based on our country, our state drop down gets populated.It seems this is doable, but I am not able to figure out how.I would really appreciate any help
Thanks

This is very simple if you understand PHP code. Basically, you give the two buttons different names, and use PHP conditional logic to control what happens. Call one button "verify" and the other "insert". If you use the POST method, you control the script like this:
if (array_key_exists('verify', $_POST) {
// create a recordset to retrieve the details ready for display
} elseif (array_key_exists('insert', $_POST) {
// insert the details in the the new table
If you're not comfortable coding PHP yourself, the easy way to do it with Dreamweaver server behaviors is to use separate pages. In the first page, just create a form for the user to enter the serial number. Use the GET method to send the serial number to a separate page. In the new page, use the URL parameter containing the serial number to create a recordset to populate the insert form. Then apply an Insert Record server behavior using the POST method to insert the details into a new table.

Table name for the AMOUNT field in header details of costomer invoice

hi experts,
I need the table name for the field AMOUNT(wrbtr) which is in header details in fb70 tcode .I have checked many tables like bseg bsid, there its showing the amount but at item level.

Hi,
the table behind structure INVFO is RBKP (Header level).
For item level you have table RSEG.
These tables refer to MM.
Once the MM documents are completed and you post the corresponding invoice RBKP data goes to BKPF and RSEG data goes to BSEG data.
The relattion between MM(RBKP/RSEG) and FI(BKPF/BSEG) documents is in field BKPF-AWKEY. This field usually contains (RBKP-BELNRRBKP-GJAHR that is MM documentMM year).
e.g. (BKPF-AWKEY = 51056024412009)
Best regards.

The amount field in table GLPCT Activity RFBU is reaching max limit of

Hi Experts,
Need your help on below issue.
The amount filed in table GLPCT, company code 123, account 110000, Activity
RFBU and SD00 is increasing every year, and now the sum is close to the
limit of 9,999,999,999,999.99- .
this amount field is continue to increase, if depend on data when
performing year-end closing and balance carry-forward.
So, Each field contains 15 places, which leads to a maximum amount of
999,999,999,999,999 When the value reaches the maximum amount, an
additional update of an amount is not possible anymore.
System cannot update the Balance Carry-forward amount for 2012.

Have you communicated with SAP about a possible solution?

Hourly rate entered in the amount field of IT0008 calculate wrongly in RT

Similar Messages

Maybe you are looking for