Hours assigned to a resource are not showed in CAT2

Hi,
We have configured cproject in order to hours are entered by CAT2. When a employee assigned to a task enter in CAT2 see this task-WBS in his worklist ( this works OK), The problem we have found is hours assigned in cproject are not being retrieved in CAT2.
My question is, Is it possible hours planned for a resource in a task in cproject were showed in worklist in CAT2 when this resource enter as employee?
Thanks a lot for your help!!!
Sara

Hi Niranjan,
Thanks for your help. Yes, my ECC is on EHP3. Cproject and WBS are showed in the worklist, this works fine, but hours are empty.
For your answer I understand hours can be transfer to cproject to CAT2 worklist , If this is correct I suppouse my problem can be in CAT2 settings instead of cproject settings.
Thanks,
Sara

Similar Messages

Transactional Iviews are not showing ( with out super admin role assigned )

Please any solutions for the fallowing.
First Problem
I am not able to create the user from portal directly. Its showing the fallowing error.
An error occurred in the persistence; contact your system administrator.
so i had created the users in WAS by SU01.
Second
We have some users at production server ( Assume 5 users ). and those users need to be mapped at portal. So that those users can directly enter into portal and operate on SAP system .
If u dont mine Please provide with me the steps to fallow
Third
i had created some transactional Iviews that are working fine when i am log in with Administrator( super administrator role). The problem is that the reports are not showing when i am log in with general user ( with out super administrator role ) .
Its showing the error
Could not able to look up the system.
And the problem with user mapping also .
For aministrator its working fine .and for a general end user ( created on WAS )
i am not able to provide user mapping. Its showing
There are no systems available for user mapping for the selected principal
wat could be the problem ?
Your solutions will be appreciated .please urgent

Hi Pratap,
Second Problem
If the Portal user name and R/3 user are the same then no problem other wise you have to do user mapping
Third Problem
Check the permissions. Right click the system object and give permissions for all
Create an alias for the system object for doing user mapping
First Problem
Try creating user from http://<portalserver>:50000/useradmin
Regards
Arun

Suddenly, events entered in Calendar on iPhone are not showing up in iCal or iCloud

Until late November, i had an iPhone 4s with iOS 5.   Then i got an iPhone 6 with iOS 8. As previously, when i would enter an event in the Calendar, that data would also show up in my iCal calendar and on my iCloud calendar, until the last couple of days. Now, new entries are not showing up on iCal or iCloud. I encountered the problem that my iPhone, 64G, is being backed up to the iCloud and after two backups, taking up 2.4G each, my 5G of iCloud storage was used up. I speculated that this was why my phone data stopped syncing to the other calendars on the computer and cloud, though i did not know for sure. I deleted one of the two back ups and am about to delete the other one. I have never had this problem of running out of iCloud storage on my other phone. According to Settings>iCloud>Storage, i had 89MB. But since i have deleted one of the 2.4G backups (which was "incomplete") my new entries are still not showing up in iCal and on the iCloud.
Is there a way to get this feature to work again?
Are there things i can check or uncheck in settings or in Calendar or ??   that will get this to work well as it did in iOS 5?

ckuan - thank you for replying. i am really desperate for help. I have wasted so much time on this. I was on hold with Apple support for a long time and then had a call with a rep that lasted over an hour but he didn't know anything about issues of these kinds. i was put on hold a lot while he consulted. He did agree that the data wasn't syncing from iPhone to iCloud and iCal because the iCloud storage was used up by the iPhone back ups. So he advised deleting one of them. I now have 2.4G of storage on iCloud. Am i wrong to think that should be enough?   I still ave the original complete back up (2.4g) undeleted, in case there some reason that i need it. i don't like deleting things i don't have a good understanding of.
Following your instructions, i went to Settings>Mail,Contacts,Calendars. I then scrolled down to Calendars and at the bottom, i see where it says Default Calendar. This raised new questions for me which i will ask you/others now:
On the Default Calendar page, there is a heading that says iCloud and there is a second heading that says my gmail email address, [email protected]. Under the iCloud heading, there is a list of 8 "calendars," called Work, Family, Pets, Home, etc. Under the gmail address heading, there is only one option listed, which is my gmail username. When i went to the Default Calendar option, as i think you suggested if i understood you right, i found that the Calendar with the checkmark next to it was the gmail user name, under the gmail address heading. Presumably, this is the same setting i had on my 4s with iOS 5.
I wanted to follow your instruction to change this to iCloud as Default Calendar. but the only option i have is to choose only one of those 8 "calendars," either Work, or Pets, or Home, etc. Does this make sense?   The only reason i know for having these many different calendars was to give different colors to the different event categories. I didn't really want them to be separate calendars. i just wanted to use the color coding for type of event in my overall calendar.
I don't know why this is suddenly so complicated and confusing, after working fine for the first two or three weeks i've had the new iPhone. Suddenly, when i enter events in Calendar, it's not reaching the cloud. If this is because my gmail and/or google user name was checked as the default calendar, that was not a setting i would've recently changed. I never would have set my iPhone to only use one of the iCloud sub-calendars at my default calendars.
But right now, per your instructions, i have checked Settings>Mail.Contacts,Calendars>Calendars>Default Calendar to iCloud>Home (Home being one of my 8 sub-calendars). When i look on the Mail,Contacts,Calendars setting list, under Default calendar, it now says Home, instead of my gmail username. Just to be clear, there is no way to check iCloud on the Default Calendar page. i have tried checking it, but it's just a somewhat grayed out heading and doesn't respond to attempts to check it, it's not offered as a Calendar option. Only the various sub-calendars are offered a default calendar options, under the grayed out iCloud heading. So, i selected Home, for no particular reason. i have lots of entries under different categories.
Here is the result:   still no new entries showed up in iCloud or iCal. In January, a couple of days ago, i entered three dental appointments, for which i have always used Health as what i thought was a category (not a separate "calendar"). The color of Health events is green. The color of Home events is Blue. After changing the Default Calendar from gmail email address>user name to iCloud>Home (blue), the dental appointment in January did not show up. But when i went into the first dental appointment event>edit and changed the "calendar" to Home, it then showed up on the calendar. The other two dental appointments which were still Health did not show up.
Then, i changed the first dental appointment that is showing up in January back to Health (green). It still shows up, now, colored green, even though Home/blue is now my default calendar. But the two other dental appointments are not showing up.
Does this mean if want to use my Calendar and have the data backed up in iCloud and iCal, from now on, i need to use only one sub calendar and give up using the different color codes because iOS 8 is forcing me to choose only one sub calendar to be my whole calendar, and the only way to use different colors for different categories of events would be to first enter it as the default sub calendar (such as dental appointment>Home), and then go back and edit it into the correct sub calendar (such as changing it to the correct category, Health) to show the correct one instead of the "default" one?
Why was this made so much more difficult and complicated than it used to be? It was working normally up until a couple of days ago.
What i need, if possible, is info on what setting i can use to go back to using my gmail address user name as my default calendar, so that it can just work properly as it did before. It seems ridiculous that i am forced by iCloud to use a sub category as my default calendar and everything that isn't entered as that subcategory will not be processed in iCloud. Why does iCloud provide these sub calendar category options at all, if it's going to force people to only be able to use one of them?
What am i missing here?
Is there a setting that would enable combining all subcategories as one calendar, called iCloud, but where i could still use the different colors for different categories?

Tax Line items are not showing seperately as per exp in FB60

Hi,
In FB60, I have booked the two expenses with tax code separately. While simulating the entry the tax lines are not showing separately as per expenses. For example:
Suppose my tax code = AB which is equal to 10% maintained in FTXP.
At present entry is coming as follows through FB60 is:
Debit     Postage expenses     500 tax code AB
Debit     Stationery expenses     400 tax code AB
Debit     Tax               100
Credit     Vendor               1000
But we need the entry is follows
Debit     Postage expenses     500 tax code AB
Debit     Stationery expenses     400 tax code AB
Debit     Tax               50
Debit      Tax               40
Credit     Vendor               1000
But I change the tax code for second line AB to XY then calculation of tax entries shows separately according to expenses.
Please let me know where did I do the mistake in configu2026u2026..
Regards,
Babjee

Hi!
Normally, all amounts being posted to the same GL Account and determined from the same tax code as automatically derived, will generate one common auto-generated line item. This is because tax reporting is usually based on tax code (external/tax reporting) and or GL account (internal/financial reporting).
In your first case since the tax code used for both line is the tax code was the same, it would be posting to the same GL Account - hence a common line item got auto-generated.
Check the Account Key and Assigned GL Accounts in T.Code FTXP. Additionally, check the Condition Type set-up (identified from FTXP) in T.Code SPRO / from menu IMG node Check Calculation Procedure.
Regards,
Ruchi

Business Area not showing during MIGO line item process

Hi,
We are doing the MIGO process w.r.t. PO....there in Line item...Business Area not showing in its Field.
If we create another MIGO document with other PO, BA is showing...
What should be the issue...

Hi,
is this an account assigned PO ? Please check the PO document for the acct asst Tab .
whather the BA is populated .?
Please reenter the detials of GL account and try again for the PO.Please check whather the co object is properly assigned or not ?
Regards,

Why aren't my FW (PNG) image are not showing up

Hey guys.
This is really bugging the hell out of me. I feel like I
can't move on until i can figure out why my PNG images are not
showing up in preview (F12). They did yesterday before I deleted
some pages and renamed old pages I no longer needed.
All my images that was done in FW are in my root folder in
the file panel. i didn't move any of those. When I double click on
the image to bring up the "select image source" in the URL it
starts off with two periods then a slash and then the name of where
it's located as well as the name of the image. The "relative to":
is site root. i didn't change any of these setting before I deleted
and renamed pages in my file panel.
Oh, and my Ap Divs show up in light gray boxes.
Please help!
CS3 Mac

I'm confused by the subject line! Is this like 'all of your
base are belong
to us?' 8)
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Dooza" <[email protected]> wrote in message
news:gki5he$3pu$[email protected]..
> Why_ATL wrote:
>> Hey Alan
>> is the filename exactly what it should be? YES
>> Are these .png files for web use, or are they PNG
fireworks original
>> files
>> which are very large in file size because they
contain all the info on
>> layers and such? They are .png files for the web. I
can't figure out why
>> my Div is showing up in preview instead of my images
There just Div's
>> with the little blue question mark.
>>
>> This is getting harder and harder. I'm trying to
laugh so i don't get a
>> head ache over this. This is weird.
>
> Without a link we can only make wild stabs in the dark.
>
> Dooza

Some Photos in Library are not showing on iPhoto

I imported some photos from another Mac to my MacBook Air and organized them in several events. All went well until I had a large number of photos (and some videos) which took a long time to transfer and iPhoto was not responding for over an hour. I forced quit the iPhoto and now when I go back, I see the events that I had created but they are empty (photos are not showing). When I tried to re-import the photos, it says the photos are duplicate which I assume it means photos exist in the photo library. My question is how do I get the photos existing in the library to be visible on iPhoto. Thanks.

Back up your iPhoto library, Depress and hold the option (alt) and command keys and launch iPhoto - from the resulting first aid window repair permissions and if necessary rebuild your database
LN

WRT160NL DHCP reserved clients are not showing up in the DHCP Reservation window.... Why?

I have 5 computers linked to my router. 4 are hardwired and I set it up so that each of the 5 has it's own static address. One of those computers is my DVR security camera system so can monitor my cameras remotely. It was working fine for years and now I can't access the DVR remotely anymore. I notice in the router Setup that the DHCP clients are not showing up as active even though two of the computers are on. I am running XP Pro on these machines and I can PING between them so I know some communication is going on. Also I can access the DVR cameras from my main computer using the internal IP address I assigned to the DVR, but not if I try to use my current WAN IP address.
Would appreciate any advice on troubleshooting this problem.
Thanks
Solved!
Go to Solution.

It may have something to do with the firmware of the router. I suggest you should do that. The firmware that you can download from the Linksys website is version 1.0.0.3 Build 2. (http://support.linksys.com/en-us/support/routers/WRT160NL). After the upgrade, reset the router to factory settings (pressing and holding down the reset button). It is best to re-configure the router from scratch also. Try to power cycle your whole network as well.

ST06 Screen values are not showing as ecpected

Hi Experts,
ST06 Screen values are not showing as expected like avg CPU idle time and min Swap space, page out and page in values etc.
All fileds are showing "Zero Values" since last week and i just found tht today.
I Went to
SM 36, All Configured standard jobs are SAP_COLLECTOR_FOR_PERFMONITOR, SAP_COLLECTOR_FOR_NONE_R3_STAT.. etc are running fine.
Restarted the SAPOSCOL service also.Please suggest me.Please find the Enclosed values..
Compare recent days for server cambsvr13    Date/time 27.06.2008 13:40:31
Average values for peak workload
Date      Usr Sys Idl    Pages in/h             Pages out/h               Swap space              Lan packets/h          Lan errors/h
           avg avg avg         max        avg         max        avg    max size   min free         max        avg         max        avg
20080626    0    0    0           0          0           0          0           0          0           0          0           0          0
20080625    0    0    0           0          0           0          0           0          0           0          0           0          0
20080624    0    0    0           0          0           0          0           0          0           0          0           0          0
20080623    0    0    0           0          0           0          0           0          0           0          0           0          0
20080622    0    0    0           0          0           0          0           0          0           0          0           0          0
20080621    0    0    0           0          0           0          0           0          0           0          0           0          0
20080620    0    0    0           0          0           0          0           0          0           0          0           0          0
20080619    0    0    0           0          0           0          0           0          0           0          0           0          0
20080618    0    0    0           0          0           0          0           0          0           0          0           0          0
20080617    0    0   99      17,240      9,685      97,730     97,575   10485,760 9,023,492      22,430     21,205           0          0
20080616    0    0   99       7,260      3,978     101,340     97,418   10485,760 9,057,327      21,940     19,447           0          0
20080615    0    0   99       1,390      1,088     101,330
99,113   10485,760 9,162,058      16,199     15,970           0          0
Best Regards,
Vinod

Try stopping the SAPOSCOL NT service. Then, copy this folder (making a backup):
installdrive\usr\sap\prfclog to installdrive\usr\sap\prfclog_old
Then, clear out everything inside of installdrive\usr\sap\prfclog
Also, doens't hurt at this time to check the credential of the user running your SAPOSCOL, typically it should be the same as the user running your SAP instance.
Start SAPOSCOL and wait for the OS collector job to run. Give it 24 hours, come back and check.

In approval Assignments Positions are not showing

Dear Experts,
After the approval group now i am making the approval assignments, and in approval assignments positions are not showing. i have define the positions in the human resource and enable the hierarchy option in the financial options. Please help me out with this issue.
Thanking in advaance

Dear I have run that fill employee hierarchy report but it doesn't work. Please provide me any other solution.
Thanking in advance.....

Need to know why contracts(Service contracts) are not showing up in ra_interface_lines-all

Hi all,
We are running the service contracts main billing to get the contracts to ra_interface_lines_all table which are eligible for invoicing, but somehow some contracts are not showing up in ra_interface_lines_all table,
the reasons may be as follows:
1. Billing service flag set to no
2. Contract modifier > 30
3. Contract is not active or
4. Invoice interface is not set to current date.
These may be the reason for contracts not showing up in interface_lines_all, I need to write a query to state why these contracts are not coming into interface table using the above stated reasons. Can anyone help me out saying how can i write query for it?
Thanks,
Aparanjit

Hey Emilio,
I found a solution, that worked for me. Try reseting the sync services as stated in this document:
http://support.apple.com/kb/ts1627
Follow these steps:
Export your Calendar data - (you should end up with a .icbu-File) and make sure all Calendars are shown (I had one that was hidden - which later had all entries doubled)
Close Calendar
Export your Contacts (you should end up with a .abbu-File)
Close Contacts
Backup your iPhone
Close iTunes (just in case)
Open up Terminal and for Mounain Lion enter: /System/Library/Frameworks/SyncServices.framework/Versions/A/Resources/resetsyn c.pl full
Open iTunes and sync your iPhone (go to the info-tab you should see blanks and not your Calendars - don't worry they will soon show up, as you activate the sync)
Pooh. Ok. Looks like a lot, but it actually is really simple. I only did so many steps, to really make sure, I would not loose any data.
In quick words: reset your sync services with the terminal and sync again.
I will also write that down for all times in my notebook.
Cheers

Annotations and highlights are not showing up. Are they lost?

I made a ton of annotations and highlight on my ereader through digital editions, and now they aren't showing up anywhere. Help!

By "server" you mean "Testing Server"?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Randy Edmunds" <[email protected]> wrote in
message
news:ea5e04$bff$[email protected]..
> If you have a server defined for your DW site, the
Preview in Browser
> (F12) uses your server to preview your pages. In this
case, it uses the
> dependent files (such as images) on your server, not
your local machine.
> If this is the case, then upload the images to your
server.
>
> HTH,
> Randy
>
>
>> ok, when i hit F12 my pictures and my graffics are
not showing up in IE
>> browser (some of my large fonts show up but not
all). I had no problem
>> with this before earlier today. I tried to download
my site, had a
>> problem and I must've turned something off and
that's why I am having a
>> problem with pictures showing up in IE. You can see
the "Draw layer" box
>> but no picture. Can anyone help?

Few users are not showing up in Corporate directory

We have few users at a repote site who are not showing up in Corporate directory. they have UDP profile and they are logged in . i ahve compared the configration with other user of the same site who is showing up in corporate directory and config seems fine
the User is LDAP integrated in CUCM and not a local user
the corporate directory is activated as default parameter for entire cluster
Please help if we have any further things to be checked ?

There was a similar issue a couple weeks ago here
https://supportforums.cisco.com/discussion/12343101/how-refresh-corporate-directory-cucm-91
Did you check if the users are not listed if you are registered at the subscriber?
this was the solution in that mentioned post:
"worked with cisco we found that the issue only occurs when the phones are registered to the subscriber server...when the phone is registered to the publisher, the directory shows the current information. this indicates and issue with the database replication between the 2 servers.
the databases have been reset and are replication is resyncing...this will take a couple of hours..."
Eike

Ipod songs ratings are not showing in Itunes (manually managed)

Hello,
Ipod songs ratings are not showing in Itunes, however I can see the ratings in my iPod Touch 4 (that is manually managed). I have an iPod 3 an it works. Why?
I don't want to sync anything, I'm looking the songs that are in the iPod through iTunes and the rating information is missing.
Any ideas?
Thanks & Regards
SU

Hi SU
Hope this helps.
When I connect my iPod touch to iTunes on my PC - under library there is a Music folder and under iPod there is a Music folder. Which music folder isn't showing the track rating?
If the Library Music folder isn't showing ratings then see A) Updating Ratings in Library Music
If the iPod Music folder isn't showing ratings then see B) Seeing Ratings in iPod Music
I have 20000 tracks in iTunes and 5000 tracks on my iPod which I am rating as a listen to them. 1000 have ratings 4000 have none.
A) Updating Ratings in Library Music
This is on a PC. When you manually manage music on your iPod the ratings you assign on your iPod aren't automatically synced to iTunes but it is easy to do it manually and only takes a few minutes.
1) in iTunes on a PC click Music under iPOD, sort your tracks by the Rating column and select 5 star tracks.
2) Click File > New Playlist From Selection and call it 5 STAR. This creates a new playlist on your iPod.
3) Right click the 5 STAR playlist and click Export. I save the playlist export file to my Desktop.
4) Click File > Library > Import Playlist > navigate to the location you exported the playlist to (in my case Desktop), select 5 STAR and import. You may get a warning saying some tracks don't exist, you get this if you change track info in your iTunes library, it'll omit these tracks from the playlist your creating. 5 STAR playlist will appear under iTunes Playlists.
5) Select 5 STAR under iTunes Playlists and you will see your 5 star tracks from your iPod but the Rating will be blank. Select all tracks, right click, select Rating and then *****. All the tracks will now be rated 5 star.
6) Right click iTunes Playlist 5 STAR and select Delete, this won't delete your tracks.
7) Right click iPOD Playlist 5 STAR and select Delete, this won't delete your tracks.
8) You can repeat this process with your 4 star stracks then 3 star, etc.
9) an optional step. Once I've rated my tracks I delete them from my iPod.
I do this process every few weeks when I've got a reasonable batch of tracks to update ratings in iTunes.
B) Seeing Ratings in iPod Music
In iTunes iPod Music my tracks are sorted by rating and I mistakenly thought the rating column is blank. I clicked on the Name column to resort and saw some of the tracks had ratings. I then noticed that when I clicked on iPod music it didn't display tracks from the top of the list (my 5 star tracks) which I expected but half way down (0 star tracks) which is why I thought there was a problem. So now when I look at my iPod music in iTunes I scroll up the list to check they are showing ratings before doing A) above.
Regards

I've just found that three movies I've bought from iTunes on on my iPad are not showing up on Apple TV or anywhere other than that iPad. What's up with that and will I lose these films if I reset this iPad?

I've just found that three movies I've bought from iTunes on on my iPad are not showing up on Apple TV or anywhere other than that iPad. What's up with that and will I lose these films if I reset this iPad?

Thanks. The reason this has become an issue is that I recently bought a new Macbook Air that the iPad is not synced to. The one is was synced to was stolen. If I want to sync this iPad to the new Air, won't it be wiped before I'm able to copy these films or am I wrong about that?

Hours assigned to a resource are not showed in CAT2

Similar Messages

Maybe you are looking for