Hours registration in CAT2 on network level without activity

Dears,
This is regarding CAT2 time registration for Network Activity.
The hrs which was entered in CAT2 for network activity, later it was deleted.
The reason of Activity field empty in CAT2 transaction is the deletion of Activity in Project.
At the time of time registration in CAT2 transaction the Activity was entered, but after registration the Activity was deleted in the project builder.
We got this SAP Note 623693 - CAT2: Cancellation w/ deleted logistics objects, but no report found in our system.
ZCATSCNELO, as per the comment in the note, we need to know how can we delete such line items in CAT2 transaction.
Regards,
AHS

The program ZCATSCNELO is part of the OSS note you have mentioned
You will have to import that first and then follow instructions

Similar Messages

"Business Network" and "Without a Domain" -- Consequences?

In Windows 7 SP1, during installation (or later in "Control Panel\System and Security\System," under "Computer name, domain and Workgroup settings," click "Change Settings," than "Network ID") you get the following
choice:
This Computer Is Part of a Business Network; I Use It to Connect to Other Computers at Work.
This Computer Is a Home Computer; It is Not Part of a Business Network.
If you choose the former, you get the further choice:
My Company Uses a Network With a Domain
My Company Uses a Network Without a Domain
"Home Computer" is straightforward and allows you to set up a Workgroup or a Homegroup. "Business Network" followed by "Without a Domain" appears to behave the same way but is **reputed** to prevent homegroups (which is
desirable) and in general to provide a higher level of networking security. Is either of these assertions actually true?
Suppose you choose "Business Network," then "Without a Domain," or alternatively, you choose Home Computer," and in either case you continue through the wizard to the end. You have to restart, so you assume some significant
changes have been made. Yet if you then go back through the Control Panel procedure given above, you find that "Business Network" and "With a Domain" are pre-selected, causing you to wonder if these changes persist.
So my main quandary is this: Do these choices produce persistent effects that can be seen in one of the Policy Editors (or even the Registry Editor)? If so, how do you find, and if necessary adjust, them?
Similar questions have been asked at http://answers.microsoft.com/en-us/windows/forum/windows_7-security/difference-between-home-network-and-business/85597e92-2b38-4d2f-b7b3-6f45f3c750d5?tm=1390436195902, at http://answers.microsoft.com/en-us/windows/forum/windows_7-security/home-vs-business-network-choice-can-you-get-back/74a872bf-18d4-437b-99b2-ded5fa60df4e?tm=1418982314037
and at http://answers.microsoft.com/en-us/windows/forum/windows_7-security/how-to-setup-windows-7-as-a-workgroup-that-is-not/43f7a288-50cf-444e-aff8-efc7588251f8) but apparently not definitively answered. Can somebody here do so? -- JCW2

Hi,
This choice could affect many registry entries. It's hard to figure out every entry.
For example, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Group Policy\History
there is Machine Domain entry stand the current domain name.
When you choose any one of them, after restart, registry entry will adjust this new settings.
In addition, Business network without domain and home network is different. since the domain network have some security restriction for all domain network no matter if you are in doamin or out of domain.
Karen Hu
TechNet Community Support

NLA Disabled. Still can't RDP; "requires Network Level Authentication"

Had a server I could RDP onto without any issue running Hyper V.
I removed the Hyper V role.
I then rebooted and attempted to RDP onto the server and can't:
The remote computer that you are trying to connect to requires Network Level Authentication (NLA), but your Windows domain controller cannot be contacted to perform NLA. If you are an administrator on the remote computer, you can disable NLA by using
the options on the Remote tab of the System Properties dialog box.
OK... Never needed before.
I checked the network settings remotely with netsh and confirmed correct DC as DNS. So I'm scratching my head why Microsoft are lying to me?
OK, so I check the NLA settings remotely, sure enough is enabled. So I disabled via remote registry, reboot the machine, confirm the registry is set to NLA disabled again remotely and attempt to connect.
And... Same message.
I can access any other of the 2012 R2 servers on my domain without issue. I can open AD or any other Domain tools from other servers with the same DC as the problem server as their primary DNS.
How can I get that message when both the DC is contactable and NLA is disabled?
How did removing a role cause this BS suddenly?

Hi,
Thank you for posting in Windows Server Forum.
Which version of client RDP you are using?
You can use RDP v8.1 for better performance.
Apart from above, Use local admin account to log on to the virtual machine and set the DNS to point to your DC. Alternatively, assign the IP address of the DC/DNS under DNS servers of virtual network.
Also when trying to remote desktop check the option “Allow connection from computers running any version of Remote desktop (less secure)” under system properties.
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support

I want to set up my time capsule on a completely new network & location without losing the old backups. How do I do this?

I want to set up my time capsule on a completely new network & location without losing the old backups. How do I do this? I cannot find anything in the user manual.

The TC is very hard to just move.. it retains too much of the old network setup.. buried deep in the bowels of the firmware configuration files.. or even on the hard disk special partitions used by the TC.. invisible to you btw.. !!
Do a factory reset and setup from scratch.
That factory reset will have no affect on your backups.. even if you rename the TC.. not a bad things since you also want clients to respond to the new network.. simply reset TM to the new TC name and location.
See A4 here.
http://pondini.org/TM/Troubleshooting.html
Factory reset.
The Factory Reset Gen1-4.
Unplug your TC. Hold in reset. and power the TC back on.. without releasing reset for about 10sec. When the status light flashes rapidly; release it.
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
Factory reset Gen 5
Hold in reset for about 5sec until the status light flashes quickly.
If your AirPort Time Capsule still doesn’t respond, do a similar reset to the Gen1-4.
Unplug your AirPort Time Capsule .. hold in reset and power the TC back on.. without releasing the reset.. wait until status led flashes rapidly.

What changes occurred in version 8+ of itunes at a network level

Hi all
I am very desperate to solve a problem that has been nagging me for nearly two years now. Any PC in my network (Belkin wireless router / Hub) that tries to connect iTunes 8+ to airport express using a wireless card instead of Ethernet to the hub does not work. I get an error 15000 and no sound.
Version 7.7 - is OK but i cannot talk to my shiny new iPhone with that version...
EG. I upgrade to version 9 and loose my connection to the airports. I take the pc to the Belkin router and plug it with an Ethernet cable and it works fine to the airports... every thing else is OK just kills wireless streaming.
Given that i have been scouring any posts going and tried EVERYTHING... I can conclude that Itunes 8+ versions have a fundamental change that kills of air tunes streaming only through wireless network cards.
My question is that only what is the basic network level change in itunes 8+

Create a group:

Remote Desktop Connection - Windows Network Level Authentication

Hi
I'm trying to find a piece of Remote Desktop "Manager" software for Mac which supports Network Level Authentication (NLA). When NLA is enabled on a Windows Server I am unable to connect via CoRD or Royal TSX.
The reason I say "Manager" is because I have many, many windows servers I need to connect to and so I like to use software such as the above to save a list of all the servers for ease of access - this saves me having to type in the name of the server each time.
At the moment, for those servers with NLA enabled, I have to fire up Remote Desktop Connection for Mac and enter the name. I realise I could save this each time but then I would have LOADS of shortcuts.
Any ideas/proposals on pieces of software that can cater for this?
Thanks!

Hi!
Royal TSX actually supports NLA but you have to use the FreeRDP plugin instead of CoRD and enable the setting in the advanced settings of your RDP connection.
cheers,
felix

Unable to caluclate cost in CJ20 for wbs and network level.

Hi All,
I have a query in the project Builder(CJ20N).
I created Project>WBS Elements>Network> and posted costs via assigning activity.
If I select an activity and go to edit>Costs, the "calculate costs" option is activated. ( I get "Message Costs were calculated: See menu Edit -> Costs -> Planned - Actual")
And also I am able to view the cost in Edit>Costs> Plan/Actual.. "Activity/Element". Please see the screenshots of Plan /actual comparison.
However if I select the WBS or Network and go to edit>Costs, the "calculate costs" option is disabled (frozen) and also in the same path Plan/Actual> "activity/Element" option is disabled (Frozen).
Request you to review the attached screenshot and advise is there any way to defreeze the option "calculate costs" and view the costs in WBS and Network level?

Hi,
why you want to see plan cost in project builder CJ20n? any specific reason please let us know...
every structure report having this kind of feather as CN41n/CNS41 then check these two report.
and lots of hierarchical report is there for seeking plant cost in project as Gokul suggested above.
so in project builder only plan VS actual cost can be look like by network activity.
Regards,
Sanjeev

AD "Log on to" restriction causes RDP connections with network level authentication to fail

I am running a Server 2008 R2 environment and have recently enabled network level authentication for RDP connections. Since the change, users who have their logons restricted to specific servers via AD, now get an error when logging on via RDP:
An Authentication error has occured
The Local security authority cannot be contacted
After investigating this error and reading technet I found that removing the "log on to" restriction within their user object solved the problem even tho they had rights to this server. Adding the users client PC name to the "Log on
to" list also solves this issue.
My question is, is there another way around this? We have an environment where some users may require an RDP connection from a client PC not on the same domain (over VPN) as the server. It will not be practical to add many different client PC names
to the log on to list and I don't understand why client PC's must be specified in the Log on to list and not just the actual server they are logging onto.
Any pointers appreciated

I have just come across this problem on one of my client’s domains; they have recently enforced a policy to “Allow connections only from computers running Remote Desktop with Network Level Authentication (more secure)” and users with “Log on To” restrictions
on their account are no longer able to RDP using their second account.
After a lot of fiddling around I finally resolved the problem by adding the connecting computer name into “Log on To” list. Ultimately it appears that Network Level Authentication (NLA) requires authentication to take place on both the host initiating
the connection and the remote host.

Is there any method to use network printer without installing driver?

We have some embeded win7 devices which we cannot install drivers to.
Is there any method to use network printer without installing driver?

Hi,
Please read the following article:
http://en.wikipedia.org/wiki/Device_driver
You definitely need this middle man.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Is there any methods to use network printer without installing driver?

We have some embeded win7 devices which we cannot install drivers to.
Is there any methods to use network printer without installing driver?

Hi,
Please refer to your other post:
http://h30434.www3.hp.com/t5/forums/replypage/board-id/Printing/message-id/77319
Thanks.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Easy Cost Planning at Network Level

Hi All,
I was able to implement ECP at WBS level, but not able to implement at network level. I am using SAP ECC 6.0 EHP 4.
I have activated the business function ops_ps_ci_1 and also activated the 'Activate Planning for Network Activities with Easy Cost Planning' in the configuration settings in SPRO-IMG. I had gone through most of the threads on this topic like :
Network Activity Easy Cost planning
ECP at activity level not triggered
I am not able to find the option for 'Create Alternate CO Version' and 'Activate Multiple CO Version' under the Easy Cost Planning and Execution Services in SPRO-IMG.Please advise me in implementing Easy Cost Planning at Network Level and correct me if I was wrong in completing the configuration steps.

Thanku All,
I have done all the steps as you mentioned
1. Activated the business function OPS_PS_CI_1.
3
2.
3.
Activated Multiple Plan Version using the tcode RCNPRECP
Still not able to view the options under SPRO-IMG Easy Cost Planning
* Create Alternate CO Version
* Activate Multiple CO Version
Also not able to implement ECP at network level.

Configure Network Level Authentication for Remote Desktop client

We publish Remote Desktop in our Windows 2008 R2 terminal server.
However, in Windows 2008R2 , the remote desktop client will a lillte bit slow
I found out that if I modify the setting in default.rdp
authentication level:i:0
enablecredsspsupport:i:0
it will increase the speed a lot
however, how can I set all user use remote desktop will disable those feature as well?
Thanks

Hi Kenneth,
I suggest you to see similar thread "disable
Network Level Authentication Terminal Server 2008"
If above thread does not helps, seek help from RDS/TS experts in here.
Or wait until any of our moderator move this post to respective forum.
Thank you for understanding.
Regards, Ravikumar P

Split valuated material price change at header level (without val. Type)

Hi All,
Need to change Split valuated Material Price at Header level (without val. type).
In MR21 valuation type is mandetory for split valuated material.
Please suggest on changing Material price without val. type.
Thanks

You have to advise the users who create accounting views to enter a valid price when they create a material master. Maybe you need to make use of the user exit to prevent saving when no price (or a dummy 0,01) is entered.
It is not possible to change the header price with any SAP given transaction, as it could cause inconsistencies if you dont take care about the stocks at valuation type level.
you may have to deveope an own report on own risk. I personally have the opinion that it is more secure to post stock and reverse it again (which just creates to accounting documents that equalize each other, no remaining value anywhere) than going the risk with an own program to screw up the valuation of a material in general

WTC Trace level without server restart

Hi,
I am using WLI/WLS7.0SP2 to connect to eLink1.2/Tuxedo6.5 through WTC. Is there a way to enable WTC trace level without having a server restart ?
Thanks,
Suresh

Hi Suresh,
If you could open a support case and ask the support engineer to contact me, I believe I can provide an unsupported mechanism to do this.
Regards,
Todd Little
BEA Tuxedo Engineering

MAC registration on the trusted network by employees on a web based url

Hi All,
I would like to configure web based url on cisco WLAN controller for MAC registration on the trusted network by employees. And same like as guest management (Lobby admin).
Is this possiable ?
Regards,
Satish.

You would need a solution like Cisco Identity Services Engine to accomplish what you are describing. It will do exactly as you say and much, much more.
ISE Data Sheet
http://www.cisco.com/en/US/prod/collateral/vpndevc/ps5712/ps11637/ps11195/data_sheet_c78-656174.html
Device Registration Guide
http://www.cisco.com/en/US/docs/security/ise/1.1.1/user_guide/ise_mydevices.html#wp1069338

Hours registration in CAT2 on network level without activity

Similar Messages

Maybe you are looking for