House Bank Key Issue

Hi,
In our company, there is a House Bank ABCD and House Bank Key XXXXXXXX for Plant 1. Account deptt. do bank reconciliation and no issue with that..
But suddenly last month, by mistake we create a House Bank key ZZZZZZZZ for Plant 2 and assign it to House Bank ABCD. In this month, account deptt. done the bank reconciliation for plant 2 with this... Now bank reconciliation has been done for Plant 2 this month..
Now when account deptt. want to do bank reco. for Plant 1, he found the mistake...
Now how can we correct this issue... because Bank reco., is done for Plant 2 with diff. House bank key and wrongly assigned House Bank....and for Plant 1, it is pending..
Please guide.
Can anybody help me???

hi
for the house bank key to work you have to assign the bank gl in FI12 and then in FS00 in bank tab
give the house bank and the account id
You cant use the same gl for the new bank id created.
Kind regards
Arman
SAP FICO
Edited by: akausar on Nov 8, 2011 6:09 PM

Similar Messages

Bank key during creation of house bank

Hi,
When we create a new house bank via FI12, we need to specify the bank key. The problem here is that the bank key is system generated. Usually for creation of house bank, we will create in development and transport to PROD. However, we have problem where the bank key in development is NOT the same as that in PROD.
Does anyone have this problem?
Thanks & rgds,
Yvonne

Hi Yvonne,
In our systems the bank key is not automatically generated by SAP. We have it setup so that we designate the bank key and since bank key is master data, we are able to create it manually in each of our systems or ALE it over to the systems that require the information. So we do not run into the issue you've described above.
Regards,
-Anya

House bank account id bank key

Hi which is correct one plz
25. Which of the statements are correct
(Y) (N) A House Bank and Account ID can be linked to one bank key
(Y) (N) A House Bank and Account ID can be linked to many bank key
(Y) (N) Many House Banks and Many Account ID can be linked to one bankkey
(Y) (N) A House Bank can contain many account Ids which are represented through Individual bank account numbers
thanks
Raju

Dear babu
u said according to me .....thats why...... i think ... u open for some more answ ..its ok i close thi s issue
Thanks
babu
i

EBS Program RFEBKA00 Bank KEy in House Bank is diff.from ABA in BAI file

REceiveing an error that the bank key and account number not found in table T012, T012k.
The HB was created using one ABA as the Bank Key, the ABA necessary for proper u201Cchecku201D creation.
In the HB config, we set the Bank Receiving DME with the ABA needed for the ACH file, which is different from the Check ABA.
I searched everywhere, and found only one viable solution: create a pre-processor to change the ABA in the file to be the one that will match the entries on table T012 and T012k.
I tried putting data in the Alternative Account number with the ABA and the Account number, but it didnu2019t resolve the issue.
Any suggestions?

Hi Kath,
Having one Bank account using 2 different ABA should not be a problem technically, if you are creating 2 different house banks for the 2 ABAs.
My question is if the ABA number entered in the field "Bank Receiving the Data Medium" is actually responsible for Paying the
ACHs, then this field is not the right place to enter ABA. You must create a new house bank with the ABA number and may be the same account number for ACH, and leave this field "Bank Receiving the Data Medium" empty. And please complete the rest of the Payment run config for this New house Bank i.e. Bank Determination.
If you still have issues, please check if the account number provided by the Bank in the Bank Statement doesn't have a leading zero or prefix before the actual bank account. If there are leading zeros, then please change the account number accordingly in the House Bank and EBS config. Or if there is a prefix, which is sometimes used for foreign payments coming out of the same Bank account. Then you can enter the same bank account number along with prefix in the Alternative Account number field
Thanks
Ron

Delete house banks, document types, posting keys, etc...

Hi Experts,
I have a some issues in my project:
Banks:
- the company created a lot of payment methods, i want to delete all and create only the neccesary. The question is if I don't have problems with links between information that already exist in the system.
- The house banks and bank determination have a similar problem, inneccesary or old data and create just the neccesary.
Document types and posting keys:
- Have a lot of inneccesary document types and posting keys, I just want to left the standard types for document and posting keys.
My problem is that SAP have data for the operations, the changes will be necessary for the 01.01.2010, so please tell me if i don't have problems if I delete the innecesary data and start in the begining of the year with this changes.
Thanks

HI,
1. You can create required payment methods for your company code and delte all other payment methods and assign this new payment method in all your Vendor Master data in place of earlier payment methods.
Ensure that there should not be earlier payment methods in vendor master data.
2. By default standard SAP provided important Document types and Posting Keys. you can use existing Document Types and Posting Keys. or else you can create your own document types and posting keys. But better to use systemd defined existing Document types and Posting keys for good business practice.
Thanks
Chandra

Change House Bank, Bank Key #

FI Experts
I need to change current Bank Key # ( ABA) as the bank is changing its (ABA) I tried FBZP, but I don't have the option, I also tried FI02 but could not figure it out. Does any one knows how to change it? IS this somethign that must be done thru IMG or the user can do it. I don't need to create new Bank just change the Bank Key
Your help Will be appreciated
Edited by: Frank on Jun 25, 2009 12:02 AM

Go to IMG...
Financial Accounting, Bank Accounting, Bank Accounts, Define House Banks...
here is where you add the new bank key.
You also have to go to the following...
Financial Accounting, Bank Accounting, Business Transactions, Payment Transactions, Electronic Bank Statement, Make Global Settings for Electronic Bank Statement...
here is where you have to assign bank accounts to transaction types
Our bank recently changed their ABA number. The problem we had were checks that were issued under the old number had problems when we uploaded the bank BAI files that contained the new ABA number.
I would advise going into a test environment and evaluate the results of making the change so that you understand how it will impact the process of importing and posting the files received from the bank.

1 House Bank with 2 Bank Keys?

Hi all,
I am once again opening the same question....
Can we have 2 Bank keys with 1 house bank?
RK
As the Moderator has closed the message. I am asking why? The 1 line question is not so easy ok. Please let me know the how can we assign 2 bank keys for only 1 house bank. This is the Client requirement. Bank Of America has 2 bank keys and they want only 1 house bank only.
Please answer the above question.
Moderator: Please, don't close question.
Moderator: As before, please avoid asking basic questions. This is basic understanding of bank definition in SAP. Please, read help.sap.com before posting

Hi Murali/VIvek,
Thanks for the reply.....
Yes, I know that it can't be created but the client requirement is they want 2 Bank keys under 1 House bank only.
Is there any way to have this requirement to be fulfilled?
RK

What is bank key in house bank configuration

hi
what is bank key in house bank configuration. is bank key same as our bank routing number.
thanks,
monica

Hi,
You specify the bank key under which bank data from the respective country is stored.
Basically, your banks are managed by using their bank numbers. The bank number and the bank key are almost same for the house bank.
Like you said, you may define a 9 digit number that serves as a routing number too.
Hope it clears your doubt.
Assign points if helpful.
Regards,
NareN.

Creation of Account payee keys and Table for House Bank

Hi Gurus,
Please tell me how to create a Account payee keys what is transaction code for this.And let me know that what is table to check the house Banks.
Thanks

I dont think you create payee keys mate, you get that data from your financial institute(bank) and then upload it into your sap system.
so if I were in your position I would talk to the business user who deals with the bank & bank transfers currently in your client-organisation and ask for that info to be provided.
from my previous payroll expreience I know the business user for payroll, usually the payroll manager, gets that info for the sap team member and then there should also be a standard upload program to upload all those payee keys into the system.
cheers

HOUSE BANK - Account ID, Bank Key, Swift Code

Hi All,
I hv doubt in customisation of a house bank. While configuring a house bank, we need:-
1) Account ID
2) Bank Key
3) Swift Code
could anybody please explain what is the role of these 3 items when we run Automatic Payment Programme & manual bank reconcialtion of any house bank.
Thanks in advance
Deepak Garg

Hello Deepak,
I try to explai as my best:
1) Account ID:
This is uinique ID for bank a/c no. To identify ur bank under same house bank. here u will be giving the gl a/c for each bank. for ex:
In SBI u have one current a/c and one loan a/c. u will create one SBI house bank and two a/c id's which is for current a/c and loan a/c.
2) Bank Key:
This is an identification for ur house bank. i.e. each branch will have a unique bank key. thats how u will identify the house banks.
3) Swift Code:
The S.W.I.F.T. code is used for identifying banks in international payment transactions. for ur payments in other currency or foreign currency ur bank needs to have a SWIFT code.
Thanks
Murali

Bank key and house bank

hi,
1) for bank ABC, it has many branhes through out the world. may i know if each country, this bank will have unique bank key regardless branches in this country?
say in china, it has 10 branches and all are using same bank key. correct?
2) house bank is by each branch. correct?
thanks

The bank key idnetifies uniquely the bank and the branch, otherwise the purpose of the bank key is defeated. So the bank key uniquely identify the bank and the branch in a country.

Bank keys and house bank creation

Hi
My company have 9 branches all over India. HO of my organization is in Bombay.
Now every branch have bank account in respective city. 5 are Current account and 5 are Cash Credit account. But all these bank accounts are in one bank only say Bank ABC...
So how many bank key and house bank should be created? I am confused. I tried reading documentation on bank key and housebank, but my confusion is still there.

Hi,
The number of house banks depends on the branches of the bank.
You need to open a separate house bank for each bank's branch. For this, create a bank key for the bank branch in FI01 and then assign this bank key into the house bank in FI12 (Or directly create the bank key in Fi12 also)
Then within this bank's branch, if you hold more than one account then create seperate account ID for each account in that house bank.
Separate house bank for each branch helps in the faster processing of bank interfaces for payment and receipt, because then it will use the correct SWIFT code etc for that branch assigned to bank key in house bank.
Regards,
Gaurav

Issue with GL account determination of House Bank

Hello everybody,
we have small hiccup with gl account determination for house bank while doing FBWE (bill of exchange) transaction.
I have configured the house bank and created a sub account for factoring and assigned values for G/L and Discount acct using FI12.
Even linking of these to g/l's has been done in FS00. We were expecting the g/l to be pickedup automatically, whenever the housebank and account id are given in transaction.
However, when we are doing FBWE transaction for COLLECTION, the posted document shows another g/l which i find as COLLECTION ACCOUNT in table T012K-WIKON(Subaccount for bill of exchange collection - House Bank Accounts), though i am sure that i didnt assign this account anywhere in FI12 ( i couldnt see a place to attach it).
Can anybody guide me, how the <b>Subaccount for bill of exchange gets attached to a house bank and Account ID</b>? or where i might have gone wrong?
Thanks in advance,
Regards,
Lakshmi Narayana.S

Thank you very much Dominik.
Indeed, entries are missing in OBYK for the account i was having trouble. Let me check with my functional guy to know what information needs to be maintained here.

House bank issue

Hi,
I created one new house bank and check lot. Also I have done bank determination for outgoing check payments. But when i am using FBZ5 ( Print form for payment document), it is showing that "Form YF110_PRENUM_CHK is not active". So what changes I have to do for Print form for payment document. Please help me.
Jay

Hi ,
For that you can go through this solution
Go through FBZP Create a payment method and select Payment methods in company code
Select new entries button and select Form data and give Form for the Payment Medium SAP Script F110_PRENUM_CHCK
May be this information is useful to you
Regards
Surya

Issue Regarding Bank Key

Experts
When i am trying to create IT0009 with Bank details, While chooing bank key i am getting another screen with bank counry Inida but i am not getting the bank list and getting the message Search was unsucesfull.
I already moved the Configurations,kindly let me know how to fix this.
Please use proper text
Edited by: Sikindar on Sep 24, 2010 3:09 PM

Hi,
Bank Details are usually maintained by FICO.
SPRO -> IMG -> Financial Accounting (New) -> Bank Accounting -> Bank Accounts
Thanks and regards
Kiran

House Bank Key Issue

Similar Messages

Maybe you are looking for