House bank matter

Hi Friends,
We have a client working in 4.7 which has a house bank say OLD bank. We are now told that they want to change the name of the bank to NEW bank and also it has a new bank account number.
My question is :
Do we go and change the OLD bank name with new name and also with new account number /OR/ we create a new house bank as NEW bank and give it ranking order 1
AND
What would be the effect in accounting in either case ??
Thanks,

Hi,
Scenario 1 - The house bank number once created cannot be changed but you can change the name of the house bank under the house bank data tab clicking the change button on the right hand side. Rest all remains the same.
Scenario 2 - But in case the client wishes to change even the house bank number then you have to create a new house bank assign a new account id and assign the same Bank GL account number or a new one to the hosue bank
There wont be any accounting impact, the process will be same as before in scenario 1 except that the name of the bnak changes. In scenario 2, the GL account will change as well as the house bank number is changed. There will not be any accounting entry change with these changes.
hope this clarifies
regards,
radhika

Similar Messages

Single Check lot two house banks

Hi All
We have a requirement where we need to use the same check lot for two house banks.
For example, check number 102 is printed from house bank 1.
And i am printign next check from house bank 2, in that case it should generated check number 103
How can i accomplish this task.
Any inputs will be rewarded
Thanks
Rajesh

Hi
Your requirement cannot be met, I suppose. Cheque lots are created per house bank, account ID and company code. System only keeps track of the cheque lot numbers (say 001-100). While creating a cheque lot of another house bank, you can use the same range. System interprets these as two separate cheque lots. There is no other identifying criteria for the system to sense from the cheque stationery to distinquish between different banks. It is for the users to preserve a cheque lot separate for each house bank. If you use the same cheque lot also, system will keep the track of the cheque number with respect to a particular house bank only. What I mean to say, if you use the same cheque lot for two house banks, once you print the cheque from one house bank, it reduces that cheque number from the range no matter you are printing it from one house bank or another.

Bank Directory and house bank?

Hello,
i am a bit confused on Bank master data and house bank and also what is bank directory?
according to my understanding bank directory is a list of all the bank's across the global no matter our company uses them or no.
bank master data is the bank created in our system which can be our bank or customer/vendor bank
and house bank is our bank where we have out company accounts??
please confirm if i am correct or please direct me to the right answer..
Thanks

Your understanding is correct. Bank directory is a listing of all banks. You may have all or some of them (the ones you transact with - could be also your customers'/vendors' banks) in your bank master - these records reside in table BNKA, if you create them either via FI01 transaction or use the bank directory upload functionality. Now, when you assign a record from BNKA to one of your company codes, a record gets created in table T012 and that bank becomes your house bank. The bank accounts that you create under a house bank sit in table T012K.

House bank account balances and turnovers

Hello,
at our customer company we have configured few G/L accounts for multiple bank accounts - e.g. one for each house bank ID per local/foreign currency - so for each bank we have two G/L accounts configured. This works very well until we need to see the turnovers and opening and closing balances per each house bank account. Are there any alternative possibilities to see that in SAP apart from customizing a report from FEBKO and FEBEP tables?
Thanks in advance,
Joaniuka

Hi,
When you enter the transaction and select a statement or group of statements you can click on u201Cother displayu201D. Then you can see an ALV with all the entries in the statements you have selected. Opening Balance, closing balance and posting date are available in the ALV among many other fields.
Regards,
Daniel

House bank account determination error in interest rate instrument posting

Dear Gurus,
In IRI client pay each interest flow (1200 condition) from a different bank.This is because client do a payment as per the availability of the funds in his house banks. So every month I create a new payment detail with the payment date of the interest as the validity date with a different house bank and post each flow in TBB1 on the due date. This is working fine for the last but one payment. As usual I give a different house bank and date for the last interest payment which is due on the same day as final payment(1120 condition). When I try to post this flow I am getting error message only for flow type 1120 that "Account Determination: House Bank or House Bank account is not entered". Both the flows are due on same day but both have different flow types and bank. Is this a limitation or I need to do something?
Any help is appreciated.
Regards
Komal

Komal,
You can have separate bank details for each flow type. Try to create a separate one for flow 1120 and 1200 for the last validity date and then post. Let me know whether you still get the error.
Kalyan

Mass update of new house bank in the BP record

Our client has switched banks. We went in and added the new bank to the bank table and the house bank table. We then changed the default bank in the Company Details and the Payment Methods. The BP house banks were not changed as a result of this. Although, when we changed the default in the Company Details, it asked if we wanted to update the BP's payment terms and we told it to continue.
Is there to mass update the vendors with this new bank? They have thousands of vendors, and if this isn't changed, the payment wizard does not work properly. It moves all of these transactions to the Non-included area with a message that says the BP House Bank Account does not match the default.
Any suggestions?

You may use DTW to update DefaultBankCode for the BP.
Thanks,
Gordon

Bank key during creation of house bank

Hi,
When we create a new house bank via FI12, we need to specify the bank key. The problem here is that the bank key is system generated. Usually for creation of house bank, we will create in development and transport to PROD. However, we have problem where the bank key in development is NOT the same as that in PROD.
Does anyone have this problem?
Thanks & rgds,
Yvonne

Hi Yvonne,
In our systems the bank key is not automatically generated by SAP. We have it setup so that we designate the bank key and since bank key is master data, we are able to create it manually in each of our systems or ALE it over to the systems that require the information. So we do not run into the issue you've described above.
Regards,
-Anya

Can we map mutiple Account ID's with a single House Bank in OBVCU? (FI-TRM)

Hi,
I want to map mutiple account ID's with single house bank in OBVCU for the purpose of making Automatic Payment Transaction(F111) for my Treasury postings.
For eg:-
Bank Master-FI12
House Bank Acc ID      GL
BOB         BOB01         10251030
BOB         BOB02          23506010
BOB         BOB71          23506380
BOB         BOB72          23506390
These account IDu2019s are linked to Main Accounts.
Maintained Sub accounts, Issue & receipt in the GL Master with numbering convention as :
Issue Accounts ends with 1 & Receipt Accounts ends with 2
For eg:-For account ID BOB01
Issue A/c: 10251031
Receipt A/c: 10251032
Bank Determination -FBZP
Created Payment Methods I & O,Inflow & Outflow.
But, OBVCU, the fields in grey are House Bank,Payment Method & Currency.
In treasury module for clearing the payment request, I want to map the House Banks and Account ID's in following manner.
House Bank   Pay. Method Curr       Acc ID     Bank Sub A/c
BOB                   I               INR       BOB01     10251032
BOB              O               INR       BOB01     10251031
BOB               I               INR       BOB02     23506012
BOB              O               INR       BOB02     23506011
BOB               I               INR   BOB71     23506382
BOB              O               INR   BOB71     23506381
BOB                   I               INR   BOB72     23506392
BOB              O               INR   BOB72     23506391
But system allows me only to link a single Account ID to House Bank(BOB) and If I try to add BOB02, BOB71 and BOB72 with house bank BOB, the system will through an error message as " Target key should be different from Source key".
I could have masked the issue/receipt in treasury account determination as follows:-
Eg :- Account Symbol 3 : GL 1025103+
But,since all the other modules except Treasury has gone live ,it is not possible to change the numbering convention or account IDu2019s.
Kindly revert with the suggestions.
Thanks & Regards
Ramesh Nair

Hi Ramesh,
It is not the problem of linking different account ids to a single house bank, you had done assigning a payment method for a single currency to different account ids for the same house bank.
SAP doesnt allow this scenario
BOB I INR BOB01 10251032
BOB O INR BOB01 10251031
BOB I INR BOB02 23506012
BOB O INR BOB02 23506011
BOB I INR BOB71 23506382
BOB O INR BOB71 23506381
BOB I INR BOB72 23506392
BOB O INR BOB72 23506391
Here above you tried to assign payment method I with currency INR to different account ID's (BOB02 & BOB71) apart from BOB01 which SAP doesnt allow. You can assign a payment method with a currency to only one account id.
HOpe u understood.
Your criteria cant be met.
Regards
srikanth

G/L accounts in House Bank

I am confused. When we get EBS, which G/L account it updates. Because the G/L account (in House Banks) for bank accounts and the G/L sub-account in bank determination are the same so how does the EBS update the main Bank balance.
Do the G/L account number and g/l sub-account number have to be different? Please explain me understand. If possible please provide example
Thanks

Hi,
Main GL account is used in the house bank.
We use the sub bank account in case of automatic payment program. When we run APP system first post all the entries to that sub account. Basically this account is for clearing purposes.
And when bank sends the payment confirmation to the client via EDI than system automatically knock off the same entries from the sub account which are there in bank statement and transfer that amount to the main bank account.
This is a very useful feature provided by SAP , as there is no need of manual reconciliation of banks. With the help of sub ledger account the system does the reconciliation automatically.
Hope this will give you clarity.
Regards,
Nitin Aggarwal
Please assign points if helpful.

Issue with GL account determination of House Bank

Hello everybody,
we have small hiccup with gl account determination for house bank while doing FBWE (bill of exchange) transaction.
I have configured the house bank and created a sub account for factoring and assigned values for G/L and Discount acct using FI12.
Even linking of these to g/l's has been done in FS00. We were expecting the g/l to be pickedup automatically, whenever the housebank and account id are given in transaction.
However, when we are doing FBWE transaction for COLLECTION, the posted document shows another g/l which i find as COLLECTION ACCOUNT in table T012K-WIKON(Subaccount for bill of exchange collection - House Bank Accounts), though i am sure that i didnt assign this account anywhere in FI12 ( i couldnt see a place to attach it).
Can anybody guide me, how the <b>Subaccount for bill of exchange gets attached to a house bank and Account ID</b>? or where i might have gone wrong?
Thanks in advance,
Regards,
Lakshmi Narayana.S

Thank you very much Dominik.
Indeed, entries are missing in OBYK for the account i was having trouble. Let me check with my functional guy to know what information needs to be maintained here.

Payment Method "Bank Transfer" in House Bank?

Hi Experts
1. I have created a Payment method as Bank Transfer - "B".
2. Assigned it to the Company code
3. Created a Bank Account in a House Bank with Payment Method Bank Transfer - "B".
4. i have created a Vendor given the Bank details and choosen the payment method B.
5. Now when i post the invoice in F-43 i want the payment has to be happen in the vendor bank directly.
please help me what additional configuration i need to do for the above task.
Regards
RAJA

Dear Raja,
please run FK03 for Your vendor --> General data --> X Payment transaction
You can use the field Partner Bank Type LFBK-BVTYP to define a key (example 1,2,3,4 OR A,B,C..) that You can choose and insert during the invoice posting so the System will use this vendor bank during the automatic payment
or
FK03 --> Company Code data --> x Payment transaction --> field Short Key for a House Bank LFB1-HBKID that mean:
The key for the house bank is used if the customer/vendor is always to be paid by the same house bank. The bank selection of the payment program is cancelled with this entry.
I hope this can help.
Mauri

Check payment house bank

User has done the payment sbi bank
while updtion fch5 user has mistake update with wrong house bank id and account id.How to control other house bank for particular bank in fchi
please help me on this

Hi Expert,
If the Check is updated to the document with the T-Code: FCH6 - Manual Updation of Check En-cashment Date.
Then do the below Steps:
Step-1: Define Void Reasons in T-Code: FCHV
Step-2: Reset Check Data(i.e., Deletion of En-cashment Date) in T-Code: FCHG
Step-3: Issued Check Cancellation in T-Code: FCH8
Step-4: Check Register in T-Code: FCHN
Regards,
GK
SAP

Vendor open line item amount payment in app through different house banks

Hi,
Kindly Help me.
Our client requirment is vendor open line item amount payment in app through using different house banks is it possible.
Please let me known
Thanks & Regards
Ramu

Hi
Generally , you can assign a default house bank and account id in the vendor master record. During execution of Automatc payment program this house bank will be used ( provided your APP configuration via FBZP and APP parameters are in line ). However, you can change the default house bank at the document line item level to a different house bank and this would be checked with house bank configuration via FBZP ( and your APP parameters ) and payment made via the preferred house bank .
You may also change the house bank while editing the Automatic payment proposal through a re-allocation of house bank .
Hope this helps.
Regards
VidhyaDhar

One vendor -payments to be made from two house banks

Hi
In our company code, we have a vendor who supplies two kinds of materials, let us say hardware and stationery items.
For the supply of hardware materials, I have to pay him from one house bank and for the supplies of stationery, I have to pay him from another house bank.
So how to distinguish the two payments when i run payment run in F110.
any help please?
regards
prasad

Hi,
Why don't you try by doing through f-53 it is possible,
regards,
Santosh kumar

Payment Program - Error FZ570 "No valid house bank found"

I am using SAP ECC 6.0 and am getting an error message FZ 570 "No valid house bank found" for a single house bank when cash concentration is performed (trans FFWR). All other house banks are OK.
Can anyone tell me specifically what is causing this error? I have checked all the configuration tables for this house bank and it all seems fine. I really don't want to debug F110 to determine what is causing this problem.
Note: This house bank shows up as an exception on the Payment List as error 070 but it is really FZ570.
Thanks for the help.

Hi Joanne,
I think you can get a better response in the ABAP or FI Functional forums.
Best Regards,
Ravi

House bank matter

Similar Messages

Maybe you are looking for