House bank -new bank acct prob

Hi All,
I had created a new House bank and under this I am trying to create a new bank acct.
Wherein I am choosing bank account number as XXXXXX(Six digit number)as specified.
The system throws me an error as shown below:-
The error message is as shown below:
<b>Bank account number contains invalid characters
Message no. AR135</b>
I believe the system should accept any number that we provide... can anyone help me in this why system is not accepting the bank acct number.
Thnxs in advance,
Venkat

in SPRO
check your country specfic setting in general setting.
system will accpet the bank account number as per setting that you defined in"  SPRO->General Settings->Set Countries. enter your country & see the setting.
Further, if you are using the IBAN & system display the message as you mentioned above. please read the following note.
Note 921179 - Program termination CONVT_NO_NUMBER during IBAN maintenance
please assign point as way of thanks
Message was edited by:
        MSiddique

Similar Messages

  • House bank ID and acct ID are missing in mast.record for acct...

    Dear SAP Gurus,
    Please help out in the error that I am having here in FBWD for clearing accounts.
    I made payment with F110 for Bill of Exchange and Now I want to clear the amounts.
    1,

    Dear SAP Gurus,
    Please help out in the error that I am having here in FBWD for clearing accounts.
    I made payment with F110 for Bill of Exchange and Now I want to clear the amounts.
    1, How can I clear these amounts after payment with F110.
    2, what are the other ways to clear the amounts apart from FBWD.
    3, Error (1), the error that I am getting while trying to visualize the values with the account which is assigned to the house bank "House bank ID and acct ID are missing in mast.record for acct 11301246" Message no. FW024.
                                               though the house bank and ID exists in the system and accounts are assigned in the area OBVCU (FBZP) at "Bank Accounts" area. except the account the DISCOUNT ACCOUNT (G/L A/C is assigned)  in the FI12 at Bank accounts area.
    4, Error (2),  Retd bills exch. acct missing for house bank acct BBVA1 BBVAC (house bank &ID) and pyt method.
                       system response is : Bills of exchange is imported but excluded for further processing.
    thanks in advance,
    Yella Reddy

  • Payment Methods for implementing new bank

    Hello Experts,
    I need your expert suggestions on the below:
    My Client is implementing Bank XX to replace Bank YY.  At present, the client is using Payment methods 'A' for ACH Payments and 'C' for Checks with House banks "00001" and "00002" respectively for the Bank YY. We will be setting up New House Banks for the new bank.
    When we implement New bank YY, can we:
    1. Utilize the same Payment Methods A and C for the New bank YY.
    2. What are the issues that will be encountered if we utilize the same Payment Methods.
    The Client is planning to use both the Banks for a short period of time and eventually stop using the old bank XX.
    Regards,
    Andy

    Hi Andy,
    If we go by the Payment program configuration then I don't think there is going to be much impact expect for the bank determination in this case as stated below.
    1. You already have the payment methods A and C within the relevant country and company code - so nothing on this front.
    2. You need to create new house bank 'XX' and accounts within it in transaction code FI12 (Configuration activity)
    3. But for bank determination purpose you would have to rank new house bank XX with rank 1 and not rank old house bank YY (if you don't want to use it any more) or rank it with rank 2 (if you still wish to use this house bank if the available amounts within the new house banks are low).
    4. Further you would also have to identify (within the bank determination tab) the bank account to be used from within the new house bank XX.
    5. Further if you are using this for ACH payments then assuming the transmission of file through IDOC you need to set up the EDI partner profile for this new house bank XX and also within the EDI compatible payment methods state payment method 'A'. Both these things can be done via transaction code FI12. But for setting up the partner profile may have to take help of ABAPER who can do it via transaction code WE20 replicating same settings as for old house bank 'YY' for new house bank 'XX'.
    6. For check payment method you need to set up the check lots for the new house bank 'XX' via transaction code FCHI.
    I dont think further you need to do anything other than test execute the payment.
    Hope this helps you!
    Regards,
    Prasad

  • New Bank Account- config for Manual Bank Statement

    Hi,
    Currently we are using Manual Bank Statement (FF67),and client   have opened a new bank account and new GLs have been created, I need to configure for this new bank account, kindly let me know where to maintain the GL accounts for Incoming and Outgoing, whereas   in new Bank account creation (FI12) we maintain the GL account for the Main account.
    Thanks,
    Suresh

    Hi Suresh,
    You can maintain as many accounts under a house bank as you want. You just have to maintain them with different account ID.
    Go to T-Code FBZP -> Click on House Banks -> Select your house bank under which you want to create a new account. -> Double click on Bank Account on the left pane -> You will see list of accounts maintained under the bank -> Click on New Entries to create a new account under the existing house bank. -> Mention a different account ID (different from existing ones) for your new account and also mention other details like Bank account number, GL Account, Currency etc. -> Save it.
    Press Back button and you will see the new account ID added to the list -> Now go to Bank determination option on the initial screen and configure to use the new account as per your requirement.
    Hope this helps.
    Regards,
    Abhinav Sethi

  • Payment method with new bank details

    Hi All,
    im using a program to print the salary cheques for certain payment methods, after running the payroll.
    but now that the new bank details is not updated when i try to print the cheques.still looking at the old bank details for a payment method.
    so could any one help me whether do i need to update any configuration link for the payment method and bank details.
    Thanks in advance.
    Sud

    Hi Sumit,
    I have one problem for creating employee as a vendor. For creating employee as a vendor we are using PRAA T.Code. While creating system is picking House bank as a DB but according to my company code our house bank is SB01.
    I believe this is becoz of DTAKT Feature. Can you pls. guide me how to maintain return value for this feature.
    5-character code for bank: This is house bank Code?
    5-character bank account code: It means bank key of house bank?
    Thanks & Regards
    Rajesh

  • New Bank A/C Creation Error

    Hi everyone,
    While creating a new bank Account i am getting following error....
    "Unable to verify the value entered into the OrgName field. Please select the List of Values icon for this field to select a valid value."
    this error actually arrises when i add operating unit in the organization access page of bank account creation form....
    I have already created some banks , bank brenches and bank accounts but i didnt face this error before....
    we are using a 12.1.1 version....
    waiting for some early reply....
    Thanks in advance....
    Salman Ahmed.

    thanks for the reply , yes i have selected my operating unit in organization access form from its list of values , value shown in the LOV but after selecting it when i wanted to finally apply the account , at that time at gives this error....

  • Changing Vendor Payable Accounts to a New Bank

    My client wants to transition over vendor payable account to a new bank.
    Can you tell me the required configuration, ABAP requirement and system changes to get this done?

    Define bank, branch and bank account using below navigation -
    Cash Management Super user > Set up > Banks > Banks/Bank Accounts
    Before you define bank account, you have to proivde Legal Entity access to bank account which will own this bank account.

  • House Banks and Bank Accounts

    Hi,
    Can any one tell me how to create House banks and bank accounts programatically of FI12 tcode.
    Any FM or BAPI will do?
    Thanks
    Viswa

    Hello Viswa,
                       You can use the FM "BAPI_BANK_CREATE".
    Thanks,
    Greetson

  • Error  adding new Bank

    Hi,
    I am trying to add new bank details for Direct deposit, I am getting this error. any help appreciated.
    Thanks,
    Dileep
    A critical error has occured. Processing of the service had to be terminated. Unsaved data has been lost.
    Please contact your system administrator.
    Syntax error in program /1PAPA/FEAT000DTAEL                     ., error key: RFC_ERROR_SYSTEM_FAILURE
    com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException: Syntax error in program /1PAPA/FEAT000DTAEL                     ., error key: RFC_ERROR_SYSTEM_FAILURE
         at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:101)
         at com.sap.xss.hr.per.xx.bank.fc.FcPerBankXX.modifyRecord(FcPerBankXX.java:232)
         at com.sap.xss.hr.per.xx.bank.fc.wdp.InternalFcPerBankXX.modifyRecord(InternalFcPerBankXX.java:706)
         at com.sap.xss.hr.per.xx.bank.fc.FcPerBankXXInterface.modifyRecord(FcPerBankXXInterface.java:116)
         at com.sap.xss.hr.per.xx.bank.fc.wdp.InternalFcPerBankXXInterface.modifyRecord(InternalFcPerBankXXInterface.java:237)
         at com.sap.xss.hr.per.xx.bank.fc.wdp.InternalFcPerBankXXInterface$External.modifyRecord(InternalFcPerBankXXInterface.java:313)
         at com.sap.xss.hr.per.us.bank.detail.VcPerBankUSDetail.onFlush(VcPerBankUSDetail.java:218)
         at com.sap.xss.hr.per.us.bank.detail.wdp.InternalVcPerBankUSDetail.onFlush(InternalVcPerBankUSDetail.java:267)
         at com.sap.xss.hr.per.us.bank.detail.VcPerBankUSDetailInterface.onFlush(VcPerBankUSDetailInterface.java:144)
         at com.sap.xss.hr.per.us.bank.detail.wdp.InternalVcPerBankUSDetailInterface.onFlush(InternalVcPerBankUSDetailInterface.java:136)
         at com.sap.xss.hr.per.us.bank.detail.wdp.InternalVcPerBankUSDetailInterface$External.onFlush(InternalVcPerBankUSDetailInterface.java:212)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:492)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:438)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.access$600(FPMComponent.java:78)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.raiseReviewAndSaveEvent(FPMComponent.java:948)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPMProxy.raiseReviewAndSaveEvent(FPMComponent.java:1111)
         at com.sap.xss.per.vc.detailnavi.VcPersInfoDetailNavi.next(VcPersInfoDetailNavi.java:226)
         at com.sap.xss.per.vc.detailnavi.wdp.InternalVcPersInfoDetailNavi.next(InternalVcPersInfoDetailNavi.java:163)
         at com.sap.xss.per.vc.detailnavi.DetailNaviView.onActionNext(DetailNaviView.java:153)
         at com.sap.xss.per.vc.detailnavi.wdp.InternalDetailNaviView.wdInvokeEventHandler(InternalDetailNaviView.java:161)
         at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
         at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
    Edited by: Dileep Amboji on Jul 13, 2010 9:47 AM

    are you using any BADI in the backend? do you get the same error in backend using PA30? Please can you check it

  • How re-assign old bank statements to a new bank account?

    Hi Folks,
    Actually, we have a bank account and use to enter bank statements for the same account for reconciliation purpose. But later we found some mistake in that bank account "GL accounts", so we tried to update the problematic GL account, but Oracle is not allowed us to do so. Hence, we have entered end-date for the same bank account and created one more new account. Now, how can we re-assign all those old bank statements to the new bank account? Can any expert help us in this issue?
    Thanks in advance.

    If you have reached the limit of 5 authorized PCs, you can always use the deauthorize option that is available for one time each year.  See this article for more information.
    iTunes Store: About authorization and deauthorization
    B-rock

  • Create new Bank Control Key !

    Hello ,
    I did not find how to create a new Bank Control Key . Can you help me .
    Thank you .

    Hi
    This field contains a key for checking the combination of bank number and bank account number.
    Use USA
    In the USA, this field determines whether you are dealing with a savings or checking account (if you do not enter a value, then 01 is taken as the default):
    01 Checking Account
    02 Savings Account
    03 Loan
    04 General Ledger
    In India this field specifies the bank account category of the employee. The account categories are defined as follows:
    10 Savings account
    11 Checking account
    Hope the information will be helpful for you

  • To add a new bank name in bank accounts field --AP

    Dear All
    In AP super user ---payments--entry--payments screen  there is Bank Accounts field --how do we add a new Bank name( to that LOV)
    Kindly guide
    thanking in advance
    lincy

    Define bank, branch and bank account using below navigation -
    Cash Management Super user > Set up > Banks > Banks/Bank Accounts
    Before you define bank account, you have to proivde Legal Entity access to bank account which will own this bank account.

  • Add new bank account in master data client with idoc DEBMAS.

    Hi friends,
    I have an issue.
    I am trying to add new bank account in master data client with idoc DEBMAS.
    But when I submit, then just overwrite the bank data but not add.
    I try playing with MSGFN code with value '009' or '004' but nothing done.
    Someone has met this issue ?
    Thanks for your answers.

    Thanks,
    But what do you mean ? where can I find this path , in img ?
    Fields->Set Qualified Update ->Append Option
    I think we have to use another idoc :
    BUPA_C_BANKDETAIL_ADD01 SAP BP,  BAPI: Add Bank Details
    I'll try...

  • New bank reconciliation report in 8.8.1

    Hi,
    I'm trying to find details about the new bank reconciliation report in 8.8.1 ( a screenshot or detailed description of contents).
    Banking - Banking reports - Bank Statement Information. I believe it is a crystal report.
    I can't find any detailed information on the 8.8.1 landing page.
    Can someone who has a 8.8.1 install send me a screenshot or detailed description?
    Thanks

    Hello Maeve Cahillane ,
    If you got it is good otherwise i have maual for configuration and execution.
    Thanks
    Manvendra
    Edited by: Manvendra Singh Niranjan on Apr 30, 2011 12:35 PM

  • New Bank Import Format

    Hi Experts
    We have a situation where we had to create a "new bank import format" for a customer through the "SDK". The new import format was created in our "partner" test system. We have tested the new bank import format all seem to be working fine.
    My question is how to transfer the "New Bank Import Format" from the "partner" tenant system to the "customer" test tenant as the customer would like to perform there own testing. Do we have to developed the "new bank import format" through the SDK again but within the "Customers" test tenant.
    Thank you for you help
    Antonio

    Hi Antonio,
    Each type of transaction on a bank statement is identified by a particular transaction code. These transaction codes are not globally standardized, and they vary from bank to bank as well as from format to format.
    The system uses its own internal transaction codes to identify types of bank transactions. To enable the system to interpret the external transaction codes on your electronic bank statements, a mapping between the internal transaction codes and the external transaction codes that are used by each of your banks must be created. The formats that are predelivered with your system already contain this mapping. However, you can edit this mapping to fit your business needs. .
    You define your own mapping in the Business Configuration work center, in the Activity List view. In the Fine Tune step, choose  Edit Import Formats for Automatic Generated Bank Statements.
    If the same set of external transaction codes is used by several of your banks, the same mapping can be used for each of these cases.
    For more details, please go to Help Center check ' About Import Formats for Bank Statements'.
    Hopefully, this helps!
    Regards,
    Wendy

Maybe you are looking for