House number for LSMW /BDC
HI Experts,
When am doing the LSMW/BDC for Customer master House number field in general data.
the" house number " filed is not appearing since Street filed only apearing.
Is there any method to appear house no. filed .
I want to update house no filed for multiple customers.
Regards
Venkat
Hi
I will suggest to use the LSMw with Standard Batch/Direct input method with following details
Object 0050 Customer master
Method 0000
Program Name RFBIDE00
Program Type B Batch Input
after that you can select the field HOUSE_NO in the structure BIADDR2 - BI Structure for Consumers and maintain the same in the sorce fields
REgards
Damu
Similar Messages
-
Issue in population of Ship to party house number in Sales Order
Hi Experts,
I have created a program that creates an IDOC from the input file and then it uses
IDOC_INPUT_ORDERS to create sales order from the IDOC.
Now, the input file has Ship to party that is different from the Sale to party.
So, I created the IDOC with two E1EDKA1 segments.
1> E1EDKA1 and PARVW = 'AG' PARTN = some number from file.
2> E1EDKA1 and PARVW = 'WE' PARTN = value from file
Also STRAS, NAME1, ORT01, PSTLZ, LAND1, REGIO and IHREZ
is populated on the basis of values from the file.
Now, STRAS consists of both Street and House number.
And in my final sales order created I can see all other ship to party details.
But, the house number is being picked from that of Sold to party.
Please advice on how we can get the house number for Ship to Party.
Thanks in Advance.
AmitHi Hadiman,
My problem is non population of house no in Ship to party detail.
The house number I am referring is the one of E1EDKA1-STRAS
which is combination of street and house number.
I tried by passing the house number into E1EDKA1-HAUSN . But, again I faced the
same problem. -
Problem about House Number of Vender Transfer by using LSMW+Batch-Input
Hi,
anyone has met the same problem?
by using LSMW+Batch-Input method to transfer vender data the field House Number cannot be added.
Object: 0040 Vendor Master
Method 0002 Shared
Program Name RFBIKR00
Program Type B Batch Input
Thanks in advance!in Vedndor master LSMW batch input method there is no field for House Number , we have only one filed
(STRAS)for street and house numner in LSMW.
first create the vendors after that update through XK02
for this you can write program small LSMW recording method
using below fileds
LIFNR C(010) Vendor
BUKRS C(004) Company Code
STREET C(060) STREET
HOUSE_NUM1 C(010) HOUSE_NUM1 -
How to get the document number for a ware house order.
Hello gurus,
how to get the document number for a ware house order. [if GI is posted refering that WH order] .. is there any report?
Thanks in advanceThere are several options. When you post a Goods Movement, you can use LB12 -display Transfer Requirement for material document or LB11 Display TR for material.
Depending on how your system is set up you may have gotten a Transfer Order automcatically. In this case you can look at LT24 - Transfer Order for material. -
How to upload data for me01 using LSMW BDC METHOD
*hi export please tell me the complete procedure for uploading data in me01 using LSMW BDC METHOD*
Moderator message: please search for available information/documentation.
Edited by: Thomas Zloch on May 8, 2011 10:06 PMHi,
To be honest I don't understand your question. When You execute LSMW and create project, then all steps are shown in a very clear way with good description. With which one you have problems?
Best regards
Marcin Cholewczuk -
Street and house number not showing for few customers in search xd03
Hi All,
While trying to search for a customer number in XD03 using "Address Attributes", i get the list of customers which is fine. However for few of those customers, system does not show the street name or the house number in the initial search result screen. When i go to check those customers, i see that those are maintained.
Can you tell me why is it not showing in search screen although they are maintained properly.
Regards,
IndraveerYou may need to check how those customer masters are created.
Also check whether those master records are set with deletion indicator or blocked.
Before posting my first response, I too searched OSS notes, but in vain.
The below OSS notes is not exactly providing solution for your issue, but you can have a look at those.
Note 1040733 - Search Help DEBIX: no result found as it should be
Note 408456 - F4 help selections not transferred for customer/vendor
Note 713677 - CUSTOMER_SEARCH/VENDOR_SEARCH fails if the address is shared
Regards -
Documentation for LSMW and BDC
can anybody give me documentation for LSMW and bdc and its relevance in asset accounting.
Hi Anand,
there are several threads available in this forum for this topic. kindly do a search- you will get several useful material.
i have given u couple of useful links
LSMW
LSMW demo
BDC & LSMW
The last thread has both the topic u have asked about.
Thanks
Janani
award points if helpful -
Po number as assignment number for each item in MIR4 using substitution
Hi All,
Using substitution rule in GGB1 iam getting assignment number as PO number only for GL documents.
But i need the same PO number as assignment number for cleared item documents...
iam getting YYYYMMDD field as assignment number for each line item....but i need PO number...
how can i achieve it...
pls help experts...
Regards
Ram
problem solved
Edited by: gajeramesh on Feb 3, 2010 2:25 PMHi,
After creating the items you can write your own text upload program to upload the item texts. Note it cant be uploaded through BAPI or BDC.
Search the forum for SAVE_TEXT FM, you will get lots of examples for this.
Also Read the FM documentation for the above FM in SE37.
Regards
Karthik D -
Return to vendor via delivery, customer number for each vendor?
Hi
We wish to use return materials to Vendor via delivery process
addition to required configuration, we need to maintain Customer number in Vendor master
In out plant we have more than 500 Vendor masters, do we need to create customer number for each vendor? or can we create a generic customer ????
Business has a concern on creating customer for each vendor since number is huge, Sales guys may get confused with these numbers
Please suggest a way out
ThanksThanks Jurgen for the reply
We have Vendor Work flow setup in the system. Which means when ever vendor master is changed [Return indicator ticked] workflow kicks off which means it goes for approvals. This is why we dont want to go for tick as and when needed. When ever there is a return, return to vendor must be ticked, it will go for approval etc so it slows the process
we are thinking if we can achieve through data load before SAP GO-Live so that users able to return without any delay
NOTE 447070 says 'the automatic creation of the required customer data is not supported in the data transfer'
this is related to automatic customer create isnt it
i was thinking as below
--> Create Ship-to's for all vendors
--> Load vendors via LSMW [along with return to vendor ticked and customer number(created above)]
Tested in SAP
created ship-to
Created vendor with above customer number
Do you see any issue?
Thanks -
How to Include House Number when Creating SO using BAPI
Dear Experts,
I am using BAPI BAPI_SALESORDER_CREATEFROMDAT2 to create a new Sales Order. I can actually create the sales order with all other fields right except for the HOUSE NUMBER in the SHIP-TO PARTY.
For the BAPI_SALESORDER_CREATEFROMDAT2, I have include the table ORDER_PARTNERS with structure BAPIPARNR. But when I check in the structure BAPIPARNR, there is only the field STREET (char 35) but no individual field for HOUSE NUMBER. May I ask how can I insert the HOUSE NUMBER to the Sales Order?
Points will be rewarded for helpful answers.
Thanks in Advance.Hello,
1) BAPI is not returning the sales order number to the program but when checked from SE37 it is returning the sales order
number.
- are you passing simulation parameter (TESTRUN) as 'X'
2) It is not updating the VBFA (SD flow) table.
- Please use BAPI_SALESDOCUMENT_COPY for copying and updating VBFA table
Thanks
Krish -
1099 Misc IRS file is missing house number information
Hi Team ,
After implementing the SAP Note 1666672 for US legal changes 2011, In 1099 Misc IRS file house number is missing .
Could you please help on this ..
Thank You
Jagadeshwar.G
91-9676486129hi
check out this SAP Note.
Note 1668024 - Year End 2011 Additional Changes for U.S. Tax Reporter -
House Bank for ACH transmission
Hi,
I have been setting up ACH processing for making payments to our vendors.We have bank key or ABA number or routing number for checks which has been updated in the config.FI12 field Bank key.Now for ACH processing bank is using different routing number, DO I need to create another house bank for ACH or is there nayway I could use the same house bank which we already using for checks.Thanks
Regards
ShaunIf it is the same bank, you do not need to create a seperate house bank. In FI12, choose the house bank and at the bottom click to expend 'Data exchange'. You need to populate 'Bank receiving DME' and 'Company number' fields. I believe 'Bank receiving DME' is that another routing number your bank is talking about. You can test it to see whether it shows in the right place in ACH file.
-
F110 Error Specify a lot number for the production run Message no.FS546
Hello Experts,
I am doing F110 Automatic payment Program.
All stpes i had done , but Click to start the payment run.
System give me error,
Specify a lot number for the production run
Message no.FS546
For that I had maintained T code FHCI
Maintain Check lot , But system can not pick check lot.
And Maintained Variant in that tab where we can give you House Bank , I'd , Check lot number (But it can not save)
Please tell me what should i do ?
Waiting for reply.
Regards,
JemesSir
No sir check lot is not there.
Can you tell me in Varaint Field which field i have to fill.
Program run date:25.09.2009
Identification feature:P5
Paying company code:1000
Sending company code:1000
Payment method: C
Pmt meth. supplement:
Business Area:
House Bank: STD01
Account ID: STD01
Check lot number: 0
(Check Lot No. is not save inthis field)
Restart from Check Number:
Currency: INR
Payment document no.:
Print Control
Print Check:Tick
Print pay advice note:
no form summerysection :Tick
Do not Void any check:Tick
Please suggest what chnages i do ?
wating for reply.
regards,
Jemes
Edited by: Jemes on Sep 25, 2009 10:41 AM
Edited by: Jemes on Sep 25, 2009 10:47 AM -
Initial inventory upload using LSMW,BDC
Dear Friends,
I am trying to upload data for Initial inventory capturing of valuation type for t.code MB1C using LSMW,BDC BECAUSE of valuation type it is not capturing
please guide me.I am using SAP Ecc 5 version.
Thanks in advance.
Rafeeq ahmedHi Sameer,
Have a look at these threads, they might help you
Chart of Accounts Upload
Problem: LSMW with transaction FS00 create account (BI is not generated)
Thanks
Janani
award points if helpful -
BAPI_SALESORDER_CREATEFROMDAT2 house number
Hi,
I am trying to create sales order using BAPI BAPI_SALESORDER_CREATEFROMDAT2.
But I am not able to find any parameter in the FM for house number. Streetis available but house number is not availabale. Can anyone tell me how to create order number with house number field.> There is no seperate field for House Number. The
> STREET field includes both house number and street
>
> ORDER_PARTNERS-STREET - House number and street
Yes.. that's what the problem is. If I use ORDER_PARTNERS-STREET it updates the field ADDR1_DATA-STREET on the address screen and not the house number ADDR1_DATA-HOUSE_NUM1 field which I want to insert. I can see one more table PARTNERADDRESSES in the TABLES of BAPI , can I use this for my purpose. If yes, how ?
Maybe you are looking for
-
Can Time Machine back up an external hard drive plugged into a Time Capsule
I have iTunes and iPhoto libraries that have outgrown the hard drive on my laptop so I've moved them on to an external hard drive. Since I'd like to move around the house with the laptop, I've plugged the external hard drive in to the Time Capsule so
-
Trouble to connect to Oracle Lite with JDBC
Hi. I have installed Oracle Lite 9i on my PC (Win 2000 Pro). Then I connected an HP Jornada 525 (WinCE 3.0) and with ActiveSync I installed the Oracle Mobile Client. Using MSql, I created some tables and did some data inserts - Oracle is working fine
-
How is possible to insert the Author name of sheet on header page?? bye gianlu
-
Multiple aperture libraries?
I am a dentist and take many before and after photographs of cosmetic cases I complete. I also take many family photos. I have one library for both with many projects but would love to have a "family only" library and one for my dental practice. Is i
-
Sounblaster Audigy 2 installation troubles under Windows 7
Please see the discussion started at Microsoft, http://social.answers.microsoft.com/Forums/de-DE/w7hardwarede/thread/c00e2-82a2-4ab-8430-39efb9c45806: Hi. Was almost htrough with installing all my applications under Windoes7, even my soundcard was re