Houston based Oilfield company looking for part time help

i-Tec Well Solutions, a Houston Texas based company, is looking for someone to set up existing pressure transducers and load cells to work with existing Labview Signal Express software. This should be a short term contract job, which would include:
Wiring up all equipment for easy and frequent use.
Installing software on a dedicated shop computer.
Programing the software for collecting pressure data and force data.
Recommendations for purchasing additional equipment.
Recommendations for purchasing additional equipment to equip existing analog pressure pumps.
Design and build a stand-a-lone shop test cart for mounting/storing all essential equipment.
If interested, please contact Dennis @ [email protected]
i-TEC Well Solutions
5535 Brystone Drive
Houston, TX 77041
web: www.i-tec.no
email: [email protected]

Hello Joe:
Do you need someone on-site? I could offer you remote work with the best pool of designers and DPS experts? We have been using it since the initial publi release in 2011
Email me if you are interested => [email protected]

Similar Messages

CLA/CTA - looking for part-time challenges - San Francisco Bay Area

I am looking to do some freelancing and/or part-time work towards LabVIEW/TestStand. Please send me a private message if interested and I can share details.
Kudos always welcome for helpful posts

Seeking help to delete calls to a Martox frame grabber and install NI-1433.
If interested, please call 5129213691
Thanks
Stan Jasinski
VisTec Engineering

Experienced LabVIEW Engineer looks for part time projects

Swedish LabVIEW Engineer with over 5 years of experience. Speciallity: analysis and Vision applications.
Looks for smaller part time projects (that can be performed at distance).

Hi,
I have 6 years of experiences in labview application.I would like to develop the code through the internet.
Kindly let me know if the openings still available.

CLD Certified Engineer Looking for Part Time Job

I am a Certified LabVIEW developer with around 3 Yrs of experience in developing LabVIEW based applications. I am currently working on Version 8.5. I have worked with Analog, Digital, GPIB, CAN, J1850 and Serial protocols. I have also worked on Non NI devices such as AB PLC controllers. I have developed small to complex standalone applications. Some of them were production in-line systems.
I can work in the evenings and during weekends. I can send my resume if needed.

I am interested in reviewing your resume. Please send to [email protected]

MSEE, CLAD, 2 years exp, looking for part-time projects

Serviced fields: Imaging, Optics, Biomedical Instrumentation
[email protected]

Hi,
I have 6 years of experiences in labview application.I would like to develop the code through the internet.
Kindly let me know if the openings still available.

Looking a part-time job

Dear all:
I've use LabVIEW to develop test software more than 4years. I'm looking a part-time job now.
E-mail: [email protected]
¤╭⌒╮ ╭⌒⌒╮
╱-◥?80?80◣ ╭ ╭
︱田︱田田|
Boone Mail:[email protected]
QQ:24732458
QQ Group:13267790
QQ Comp: 17756234
╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬╬
Boone

This thread is for posting of job openings, You will probably have better luck posting on the thread for those looking for positions.
P.M.
Putnam
Certified LabVIEW Developer
Senior Test Engineer
Currently using LV 6.1-LabVIEW 2012, RT8.5
LabVIEW Champion

Small Company looking for a LabVIEW consultant (remote consultant welcome)

Hello,
We are a small company looking for a LabVIEW consultant. This is about a 3-6 month project. The consultant must be familiar with NI hardware product as well. Please send me your resume/CV. In your email please state the following: years of experience, educational background, your hourly requirements, your location, and the amount of time you will be able to provide.
Please removes spaces on the email below.
int e g r at e d devi c e s @ yah oo. c o m

I'm not sure if this is frequent on the NI forums, since I believe NI validates user information prior to issuing an account that allows them to post to the forum. But usernames (like mine) don't provide immediate identifications; you have to ask for it.
Apparently Job Scams have become more frequent. See the list of tips on the following site, (I have no relationship with this site. It just came up in a google search).
http://www.identityhawk.com/IdentityProtectionTips-inHonorof-LaborDay
5 Steps to Take Before Applying for a Job
1. Email - the company to get information about the job. Do not provide any personal information to them upfront.
2. Phone - speak to an official at the company and ask about the job. Be assured that it is legitimate.
3. Meet - at the company site to assure it is a real company. If you cannot meet, and the company is in your town, drive by to see the facility, (possibly using google maps to view the site).
4. Verify - see if you can find a person who has worked at the company or call a Chamber of Commerce of Better Business Bureau to assure the legitimacy of the company. Search online for legitimate information about the company, search online for any complaints of non-legitimacy. State Entity sites typically have the name of the company and how long they have been in business.
5. Apply - once you are assured the company is legitimate, it is safe to apply; but you should still not supply highly personal information like bank accounts until you are officially hired.

Looking for friends to help me get over a breakup

PSN MAGIIK-STICKZ Hello All, This is very embarrassing and quite silly that I have to do this really. It's scary that I have to turn to the Internet to look for friends to help me in this time of need. In the beginning of the month my girl friend left me, we was together for 4 years, we had our ups and downs but we always remained strong. She told me she wanted to be with me forever and I wanted the same. I've only just turned 19 so this was my first relationship. Don't want to get into too much details why she left me, but I will tell you that she has already moved on after only leaving me for a month. The pain hurts so much and I'm trying to move on because I can't... Because I have no friends... I mean I have friends but they're definitely not the ones you can count on in this situation. They're more "Gym Bros" I believe if I can find people to group with, play games with, literally just talk to that would be amazing for me. I just needs things to take my mind off of her and I believe talking to new people will do that. We don't even have to play games, I'm very open to you just in-boxing me on PlayStation to socialize. I'm opened to both males and females but if there are any females you would be helping a lot! I cut off all female ties for her for 4 years and now I have no female acquaintances so It would be nice to get experience talking to other females again just to boost my confidence back. I understand what I am asking for might sound like a lot, and I definitely understand how needy I sound, but this was my last resort of trying to get over her as quickly as I can. I've been in a really really REALLY Dark Place for the past month and I can't take it anymore. My psn/PS4 is MAGIIK-STICKZ Inbox me and I will be forever grateful !

rancidpunk wrote:
Shuffles slowly away, no, no, no me and Mrs Rancid haven't been engaged for more than ten years without tying the knot, no, no, no, honest. Hey at least you got engaged, that took me ten years (dont let Sooz know) Friends I can't help you with bud As for the forum and PS , as Sooz said there's here, and you might want to try some of the events http://community.eu.playstation.com/t5/Events/bd-p/bEN_CommunityEvents There's some good eggs around those folk that'll have you chatting rubbish on the mic within minutes Heart breaks do indeed sux. Even some of the really short relationships can break your heart (I know one of my short ones did, proper knocked me about that one. Although now I see it as a positive turnaround in my life) Hope one of us tools here will some how give you some cheer. Have a man hug Oh ow, and just in case there's always the Cat Threadhttp://community.eu.playstation.com/t5/PlayStation-Off-Topic/Cat-Thread/m-p/15658225/highlight/true#M1060419 or Dogshttp://community.eu.playstation.com/t5/PlayStation-Off-Topic/The-Dog-Thread/td-p/16511247/highlight/true Although they get pretty deep in there. And the thought of being a lonely old man with lots of cats and a brown setee scares me way more

I have acquired windows office 2011 for my macbook but unable to open it. There are currently 3 files in the folder, 1 of which seems to be the actual program which is a hfs file. iv tried looking for programs to help me open it but failed

i have acquired windows office 2011 for my macbook but unable to open it. There are currently 3 files in the folder, 1 of which seems to be the actual program which is a hfs file. iv tried looking for programs to help me open it but failed.
when double clicking on the image it says unable to open and gives me the option to search the app store.
any help would be much appreciated
Adam

Well, first, just make sure it's the Mac version and not the Windows version (which indeed would not run on your Mac). You say "Windows Office" which is why I mention it. I think you probably just mean "Microsoft Office" though.
Next, is this on a disk (DVD), or did you purchase and download it from the Microsoft site?
Matt

Houston based company looking for LabVIEW programmers

Infodat in Houston currently has 2 openings for immediate hiring for the following:
Engineers to develop software applications for integration with various hardware and control systems primarily using LabVIEW. The position involves integration of projects, proposal generation, and maintenance and upgrade of existing applications. Exposure to the Oil and Gas industry is a plus.
Infodat’s major areas of focus and delivery are in the Oil and Gas industry with focus on the following:
§               Tests & Measurement
§               Data Acquisition and Control
§               Process Automation
§               Mobile Technology
§               Web-based applications
Please email resumes to [email protected] and [email protected]
For more information, please contact: Andy Bhardwaj at 281-851-9062 or via email at [email protected]
All inquires will be held in strict confidence.

You should [post in the correct forum here:
http://forums.ni.com/ni/board?board.id=JobPost

Houston based company looking for LabVIEW Programmers

Infodat in Houston currently has 2 openings for immediate hiring for the following:
Engineers to develop software applications for integration with various hardware and control systems primarily using LabVIEW. The position involves integration of projects, proposal generation, and maintenance and upgrade of existing applications. Exposure to the Oil and Gas industry is a plus.
Infodat’s major areas of focus and delivery are in the Oil and Gas industry with focus on the following:
§               Tests & Measurement
§               Data Acquisition and Control
§               Process Automation
§               Mobile Technology
§               Web-based applications
Please email resumes to [email protected] and [email protected]
For more information, please contact: Andy Bhardwaj at 281-851-9062 or via email at [email protected]
All inquires will be held in strict confidence.

You should [post in the correct forum here:
http://forums.ni.com/ni/board?board.id=JobPost

UK based Alliance Member looking for local and remote opportunities

Austin Consultants is looking for contract and part
time opportunities in the whole of UK and Europe and remote work for companies all over the world. With the current
exchange rate situation, we have become really cost-effective for our clients in America, Canada, Australia and
Europe. If you are looking for expert advice on LabVIEW and other
National Instruments software development, please don't hesitate to
contact us at info at austinconsultants dot co dot uk. A brief
description of our company is provided below and a link to our website
is mentioned in my signature as well. My personal email is provided on my profile page.
Austin Consultants are the UKs highest certified LabVIEW
specialists and National Instruments Alliance Partner. We integrate
test, measurement and control systems across the industrial sector and
and are experts in LabVIEW,
TestStand, NI VISION, CVI, C, C#, .NET and Silverlight. We
have previous experience with the Tokomak Textor Fusion Reactor, and
have strong
Aerospace and Military background with Airbus, Goodrich and Horstman
Defence. We have worked with companies in the field of Green
Engineering, Research and Innovation, Optoelectronics, Automotive and
Medical device manufacturing.
Message Edited by Adnan Z on 05-14-2010 10:27 AM
Adnan Zafar
Certified LabVIEW Architect
Coleman Technologies

Dear Sir,
I would like to get an opportunity to participate in your upcoming or ongoing projects and work for you as a team member. I am a final year MSc Electrical and Communications Engineering student at University of Greenwich UK. Please give me some task to deliver as my MSc final year project or it could provide results for my project. From this experience I intend to move to enhanced certification level and have an experience of working with professionals in the industry.
My experience of LabVIEW programming and hardware integration is two years plus and I have successfully done my CLAD LabVIEW certification at NI Week last year in London. On my job I was responsible to interact with clients, gather their requirements, suggest suitable hardware modules and then program and integrate to provide deliverable solution.
Please find my CV attached and contact me at your most convenient. I can work in your South East office at Northolt if required.
Best Regards,
Harris Junaid
Cell: 07813 764372
email: [email protected]
Attachments:
Harris_Junaid(CV).docx ‏24 KB

Time [ Quota Generation for Part-time employees]

Hi Experts,
I need a help. I have a following issue.
1] Whenever an employee is marked with a tick '' as Part-time], I want the quota to be generation based on the Weekly workdays [field in SAP WKWDY].
2] I used the option of defining reduction rule by selection the radio button on the following option:
            Weekly workdays
            Day by day in accrual period
            Accrual period
            No reduction [defined in To Percentage and From percentage]
3] When I execute the PT60, get an error message as "No Standard working time for key 13 5 20100501" I am running it for the month of May2010.
Can anyone throw some light, in case I missing something. I have earlier done configuration of Reduction Rule by using the rule 01 which has the option of Employment Pct. from Plnd Working Time Infotype. and then maintain for the employee the tick on Part-time and reduce the employment percentage.
Now the client I am working wants it based on the Weekly Work Days and these are all Salaried employees.
If anyone has faced this problem and has as solution, can you please share.
Thanks in advance.
Regards,
Edociana

Hi Kathy,
Yes, i have found the solution to it. I do not know whether it will fit into your situation or not, but i got two solutions for my issue mentioned above, please check it may help:
1) To use capacity utilization field in IT0008 to get the FTE hours and defining the reduction rule of absence quota based on the capacity utilazation percentage.
2) There are three user exits available in the standard report RPTQTA00, i have used one of them to write my own rules for the calculations (deduction rule)
Do let me know if i can help you in any respect. Thanks.
Regards,
Sujit

[SOLVED] makepkg error: Why is it looking for '.part' files?

I've been seeing the following problem with every package I try to build with makepkg. The download works, but then makepkg complains that it can't find the source file:
==> Making package: android-sdk r20-2 (Fri Jun 29 11:01:35 CDT 2012)
==> Checking runtime dependencies...
==> Checking buildtime dependencies...
==> Retrieving Sources...
-> Downloading android-sdk_r20-linux.tgz...
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 78.7M 100 78.7M 0 0 1640k 0 0:00:49 0:00:49 --:--:-- 2166k
mv: cannot stat ‘/usr/local/src/android-sdk_r20-linux.tgz.part’: No such file or directory
==> ERROR: Failure while downloading android-sdk_r20-linux.tgz
Aborting...
Why is it looking for the .part file, instead of the .tgz file? When I run makepkg again, without doing anything in between, it finds the .tgz file and goes on its merry way.
I'm using curl, and I haven't tried wget. Judging by my unscientific sample of forum posts it looks like wget is the de facto standard, so this may not be on anyone else's radar.
Here's my makepkg.conf:
# /etc/makepkg.conf
# SOURCE ACQUISITION
#-- The download utilities that makepkg should use to acquire sources
# Format: 'protocol::agent'
DLAGENTS=('ftp::/usr/bin/curl -fC - --ftp-pasv --retry 3 --retry-delay 3 -o %o %u'
'http::/usr/bin/curl -fLC - --retry 3 --retry-delay 3 -o %o %u'
'https::/usr/bin/curl -fLC - --retry 3 --retry-delay 3 -o %o %u'
'rsync::/usr/bin/rsync -z %u %o'
'scp::/usr/bin/scp -C %u %o')
# Other common tools:
# /usr/bin/snarf
# /usr/bin/lftpget -c
# /usr/bin/wget
# ARCHITECTURE, COMPILE FLAGS
CARCH="x86_64"
CHOST="x86_64-unknown-linux-gnu"
#-- Compiler and Linker Flags
# -march (or -mcpu) builds exclusively for an architecture
# -mtune optimizes for an architecture, but builds for whole processor family
CFLAGS="-march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2"
CXXFLAGS="-march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2"
LDFLAGS="-Wl,-O1,--sort-common,--as-needed,-z,relro"
#-- Make Flags: change this for DistCC/SMP systems
MAKEFLAGS="-j4"
# BUILD ENVIRONMENT
# Defaults: BUILDENV=(fakeroot !distcc color !ccache check !sign)
# A negated environment option will do the opposite of the comments below.
#-- fakeroot: Allow building packages as a non-root user
#-- distcc: Use the Distributed C/C++/ObjC compiler
#-- color: Colorize output messages
#-- ccache: Use ccache to cache compilation
#-- check: Run the check() function if present in the PKGBUILD
#-- sign: Generate PGP signature file
BUILDENV=(fakeroot !distcc color !ccache check !sign)
#-- If using DistCC, your MAKEFLAGS will also need modification. In addition,
#-- specify a space-delimited list of hosts running in the DistCC cluster.
#DISTCC_HOSTS=""
#-- Specify a directory for package building.
#BUILDDIR=/tmp/makepkg
# GLOBAL PACKAGE OPTIONS
# These are default values for the options=() settings
# Default: OPTIONS=(strip docs libtool emptydirs zipman purge !upx)
# A negated option will do the opposite of the comments below.
#-- strip: Strip symbols from binaries/libraries
#-- docs: Save doc directories specified by DOC_DIRS
#-- libtool: Leave libtool (.la) files in packages
#-- emptydirs: Leave empty directories in packages
#-- zipman: Compress manual (man and info) pages in MAN_DIRS with gzip
#-- purge: Remove files specified by PURGE_TARGETS
#-- upx: Compress binary executable files using UPX
OPTIONS=(strip docs !libtool emptydirs zipman purge !upx)
#-- File integrity checks to use. Valid: md5, sha1, sha256, sha384, sha512
INTEGRITY_CHECK=(md5)
#-- Options to be used when stripping binaries. See `man strip' for details.
STRIP_BINARIES="--strip-all"
#-- Options to be used when stripping shared libraries. See `man strip' for details.
STRIP_SHARED="--strip-unneeded"
#-- Options to be used when stripping static libraries. See `man strip' for details.
STRIP_STATIC="--strip-debug"
#-- Manual (man and info) directories to compress (if zipman is specified)
MAN_DIRS=({usr{,/local}{,/share},opt/*}/{man,info})
#-- Doc directories to remove (if !docs is specified)
DOC_DIRS=(usr/{,local/}{,share/}{doc,gtk-doc} opt/*/{doc,gtk-doc})
#-- Files to be removed from all packages (if purge is specified)
PURGE_TARGETS=(usr/{,share}/info/dir .packlist *.pod)
# PACKAGE OUTPUT
# Default: put built package and cached source in build directory
#-- Destination: specify a fixed directory where all packages will be placed
PKGDEST=/usr/local/pkgs
#-- Source cache: specify a fixed directory where source files will be cached
SRCDEST=/usr/local/src
#-- Source packages: specify a fixed directory where all src packages will be placed
#SRCPKGDEST=/home/srcpackages
#-- Packager: name/email of the person or organization building packages
PACKAGER="Whitney Marshall <[email protected]>"
#-- Specify a key to use for package signing
GPGKEY="E4FB694E"
# EXTENSION DEFAULTS
# WARNING: Do NOT modify these variables unless you know what you are
# doing.
PKGEXT='.pkg.tar.xz'
SRCEXT='.src.tar.gz'
# vim: set ft=sh ts=2 sw=2 et:
Last edited by wmarshall (2012-07-02 15:39:16)

It looks like this code is the culprit. I don't have time to dig into it right now, but presumably this works with wget. I would have thought any cmdline downloader would manage renaming the .part file itself...?
makepkg, lines 395-417 (pacman 4.0.3-2):
395 # replace %o by the temporary dlfile if it exists
396 if [[ $dlcmd = *%o* ]]; then
397 dlcmd=${dlcmd//\%o/\"$file.part\"}
398 dlfile="$file.part"
399 fi
414 # rename the temporary download file to the final destination
415 if [[ $dlfile != "$file" ]]; then
416 mv -f "$SRCDEST/$dlfile" "$SRCDEST/$file"
417 fi

Looking for SIMPLE time tracking app

Hi all
I'm looking for a really simple 'retrospective' time sheet app - wondering if anyone knows one?
I've seen literally hundreds, but they all want you to 'click to start the clock' and then click to end it. This doesn't work for me, as I spend only about 25% of my time in front of the computer.
What I'm looking for is something that I can put all my client contacts in, then separately link projects to those clients. Then at the end of each day I can quickly recall what I did during the day and assign time to each project.
Most apps want you to assign time to each project as you go through the day, so its relatively painless to switch projects. However when you do it all at the end of the day, you don't want to keep entering the date, you just want to enter the start/end time, and what project it was. More like a journal entry I guess.
Then at the end of the month it would print a report that groups the hours worked on each project so that you can review them and create an invoice (or in my case send to my accounts clerk who makes the invoice for me).
Any ideas from anyone would be greatly appreciated.
Thanks!

Hi shannonbray, welcome to the AppleWorks forum, which is intended for discussions of Apple's now-legacied productivity suite called AppleWorks.
One could develop such a template using the spreadsheet or database modules of AW separately or in combo,but it doesn't sound as if that's your aim. I'm sure clever types have done such things, and perhaps shared them to the AWUserGroups and such, and I hope they note your post and reply. There are certainly numerous clever folks who follow this forum, and they may have pointers to other apps for you, but essentially I think you've posed the wrong question in the wrong place.

Houston based Oilfield company looking for part time help

Similar Messages

Maybe you are looking for