Houston LabView Programmer needed
Houston, Tx LabView Programmer needed.
We are looking for a Labview experience programmer in the. Please contact for more details. (713) 333-0227
There is a special forum for this kind of posts: http://forums.ni.com/ni/board?board.id=JobPost
Thanks!
LabVIEW Champion . Do more with less code and in less time .
Similar Messages
-
LabVIEW programmer needed for full time position, Orange County CA
Anaheim CA 92801
[email protected]
Job Title: Project Manager
Job Type: Permanent
Job Location: Anaheim CA
Main hardware expertise required: Compact DAQ/RIO (cDAQ,cRIO), Enclosures, Cabling, Other (please comment)
Main software expertise required: LabVIEW, LabVIEW Real-time (RT)
Job Description: LabVIEW programmer needed to program and update a series of technologies while using NI CompactRIO and Single Board RIO applications. Some basic networking and basic electronics experience required.
40 hrs/wk at our Orange County facility.
What qualifications and T&M certifications do you require? Technical, LabVIEW Certified Developer Prefered
Salary Offered: $60K-80K based on experience and qualifications
The attachment is a picture of the prototype ETU unit. The DBA of the company is "GreenLink Systems," our website is www.greenlinksystem.com
Attachments:
ETU and Staff.jpg 186 KBBill,
We are able to offer you the help you need on
this. I work for a LabVIEW/test-system consulting group based here out
of Salt Lake City...not too far if a quick trip is needed. Among the
six of us, four of us are former NI employees and we count with a lot of LabVIEW experience and regularly do
contract work, local and remote. This sounds interesting and right up
our alley as far as experience goes. I'd refer you to our website for
further info about different projects that we've done for many
clients. www.mooregoodideas.com.
If this seems workable for
you, feel free to shoot me a note at [email protected] I'd be
curious to know more about what you're after and how we can help you
out.
Thanks,
Jim -
Experience​d Labview Programmer Needing Job in US
Hello,
My name is Rollin, I have been working in for a European research facility in
Grenoble, France as an Electronics Engineering Technician for 8 years.
I have 3 years Hands on experience with Labview, for instrument control and
data acquisition through serial, Hpib and Daqcards. I' m in Atlanta, but I will
relocate anywhere in the US If someone hires me. I have enclosed my resume here
after.
Thank you for your time and consideration.
INSTRUMENTATION LABVIEW SPECIALIST
Mr. Rollin S. McCarty
4941 Central Drive, Apt. 705,
Stone Mountain, Georgia 30083
Phone: 770-413-4092
E-mail: [email protected]
PROFILE
Broad knowledge of control systems, electronics and instrumentation.
Labview Programming Expert (3 years hands on experience).
Excellent Documentation skills.
Bilingual French-English. US Citizen.
DETAILS
Hardware:
Design, development, installation and maintenance of PC based automation
solutions used in the fields of data acquisition, motion, process and
instrument control. Includes analog & digital circuit design, use of
electronics CAD simulation tool (SPICE), together with general purpose
electronic test equipment.
Software:
Design, development of Labview software, including low level instrument drivers
- using serial and HPIB protocols, plus various I/O analog and digital
interfaces - data processing and program logic, as well as menu driven user
friendly GUI.
Documentation:
Production of comprehensive yet attractive and understandable documentation.
HTML skills. MSOffice.
EXPERIENCE
European Synchrotron Radiation Facility, FRANCE
Computer & Electronics Engineering Specialist,
1991- 1999
Provided scientific research institute survey team using a large variety of
state of the art survey equipment with turn-key automation solutions, leading
to an increase in quality as well as in quantity of the production.
Caterpillar, FRANCE
Mechanical Methods Specialist,
1989- 1991
Training and support of fifteen mechanical computer draftsmen for their
corporate CAD tool. Provided manufacturing shop information regarding new
technologies.
Caterpillar, FRANCE
Electrical & Mechanical Technician,
1988- 1989
Preventive and break down maintenance of bulldozer girder welding robots and
associated machinery.
EDUCATION
Cuefa & Learn. Tree, France - Java bases & Networking, 80 hour training, 1999.
Esrf, Grenoble, France - Labview, 40 hour training, 1996.
French equiv. to AS/BS, Grenoble, France - Computer Programming, 1992.
French equiv. to AS/BS, Grenoble, France - Electronics, 1988.You probably already have a job, since this was posted in 1999.. But if you don't, we are looking for a labview programmer at Brown University in Providence, RI. It is a part-time position for data acquisition/analysis. we study sensory processing in the brain.. let me know if you are interested: [email protected]
-
Part time LabVIEW programmer needed
Hi All,
I am looking for a part time LabVIEW programmer to help maintain and enhance
an existing LabVIEW application.
The company is located in Central Florida area - someone local would be most
desireable. The program is fairly complex and interfaces with proprietary
DAQ hardware. If you have less than 2 years of experience, its probably
more than you would want to tackle.
Goto http://www.rgm-isis.com/ to see product info
http://www.rgm-isis.com/prod01.htm here is one of the few screen shots.
If you are interested please respond to [email protected], please don't
respond to the E-Mail that this is posted from.
The web site also has phone numbers and addresses.
Thanks
ChrisChris;
I realize you are looking for a permanent Labview programmer, but you might find the flexibility and cost effectiveness of having a contractor working on a project basis an attractive alternative.
We are a small group of programmers who specialize in, but are definitely not limited to, LabVIEW and DAQ applications. Our model is a little unusual in that we contract through a company in Connecticut, while we are individually located throughout the country (CT, TX, AZ, CA).
Every one of us has a degree in some engineering discipline with varied levels and types of industry experience. We try to match up an engineer(s) to a particular assignment based on their expertise. They also become the point of contact for all contract negotiations.
Generally, we tr
y to complete a project with minimal to no site visits, for two main reasons: it helps us keep the cost of a project down; given the scope of most one-time assignments, it is completely unnecessary. We have enough instrumentation and equipment to test most smaller systems. Granted, we may not own any particular instrument that you happen to be using (we won't have a $30k Tektronix logic analyzer!), but we can make special arrangements as required.
If you are interested and want further information, feel free to contact me at [email protected]
Regards
Eric -
Singapore Part Time Labview Programmer Needed
Hi all,
We are a Biomedical engineering company looking for Part time Labview Programmer which can assist us in developing Labview related projects such as DAQ, Motor driver, Vision capturing system. Preferably have some knowledge in interface design and motor control although no necesary.
Interested parties please email me at [email protected] for further discussion.
Warmest Regards
TC
Singapore.Hi,
I am quite intersted in ur job.. I will be free through this summer from may 15 to july 15 .. I am doing my masters in US .. I can come down to singapore at my own expense I am quite intersted in the work and would like to get more information on it so i can plan out things. -
DIRECT HIRE LabView Programmer needed!!!!!!!
I have a DIRECT HIRE opening in Michigan for LabView Programmer. Must have a background in the automotive industry. Please email me your resume or call me for more information. [email protected] or 248-528-1200 x216
Thanks!!!
-Vicki PowellThis probably belongs into the LabVIEW job opening forum.
http://forums.ni.com/ni/board?board.id=JobPost
LabVIEW Champion . Do more with less code and in less time . -
Programmer with LabView and Intellution needed for contract opening in
South Carolina. Please send e-mail to [email protected] to
request more information.I have a lot of experience with LV, what the contract?
Mike...
[email protected]
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps -
Labview Programmer needed for project work in Milwaukee Area or over the internet
We have a project I need to get done before summers end and we have majotiy of the code. My company builds robotic systems which we use for industrial inspections mainly in the petrochemical industry. These robotic systems work with a ultrasonic systems which we use to take thickness measurements of piping and pressure vessels using ultrasound. We have the ultrasound equipment and most of the software as said previously, we just need it polished up and some additions made. Here is a link from NI which is simular to what we do and you can even download the code and have a look at there code: http://zone.ni.com/devzone/cda/epd/p/id/3618 . Our code is a bit more complex but you get the picture.
This position is not a full time position as of yet. We are looking for someone to work with us on a contract basis for now. We need someone experienced with the following; Data aquisition, Data analysis, Experience with RF, USB comunication. We perfer to hire somebody local but if we cant we can can do this over the internet. If you are interested, give us a reply with contact info. Thanks.
Regards,
BillBill,
We are able to offer you the help you need on
this. I work for a LabVIEW/test-system consulting group based here out
of Salt Lake City...not too far if a quick trip is needed. Among the
six of us, four of us are former NI employees and we count with a lot of LabVIEW experience and regularly do
contract work, local and remote. This sounds interesting and right up
our alley as far as experience goes. I'd refer you to our website for
further info about different projects that we've done for many
clients. www.mooregoodideas.com.
If this seems workable for
you, feel free to shoot me a note at [email protected] I'd be
curious to know more about what you're after and how we can help you
out.
Thanks,
Jim -
North New Jersey - LabVIEW Programmer Needed
Instrumentation Engineering, LLC is looking for an experienced Test Engineer who is proficient in LabVIEW and systems integration. 3-5 years experience preferred. Competitive salary and benefits.
Instrumentation Engineering is located in Oakland, New Jersey and has been in business since 1969. IE is a engineering company whose sole focus is ATE Systems design, fabrication and integration.
We currently have one opening in the Engineering department and are currently accepting Resumes.
Please email your resume to:
David Rosenthal
Vice President
Instrumentation Engineering
http://www.ietest.com
[email protected]I'm moving to PA soon, not too far from the Jersey border (Tamaqua, PA). I might be available for work. It's unlikely that I would need to actually go to your site, although I can make myself available if need be.
John Wilson
[email protected] -
Projects are relatively small: first one is for a testing machine with data aquisition and control, second is a file storing project.
Dear Sir,
I have been working in development of various project in LabVIEW since more than 5 years. I am attaching my resume with this.
Please do send the project details and requirement, then only we can discuss about pricing and other things.
Thanks & regards,
Rajendra Gaikwad
+91 9663398272
Attachments:
Rajendra Gaikwad CV.doc 110 KB -
Need a LabView Programmer In Los Angeles area
We are in a need of an experienced LabView Programmer for a small project. The project involves modifying a LabView Version 4.5 existing application to add some additional features.
Please let me know if you are interest on working with us and then we will go in more details.
Jaime Guaman
Jaime R. Guaman
| Manufacturing Supervisor
3M Electronic Solutions Division
Canoga Park, 8357 Canoga Ave. | Canoga Park, CA 91304
Office: 818 734 4940
[email protected] | www.3M.comDear Sir / Madam,
I have sent you a copy of my CV, for your kind consideration. I feel I would be an excellent candidate for your above vacancy as it closely matches my skills and experience. I look forward to hearing from you.
Yours sincerely
Amit Amrutkar
[email protected]
Amit Amrutkar -
LabVIEW Programmer​s needed in Detroit
Greening is looking for multiple LabVIEW programmers with some experience. Below is our job description. You can contact me directly at [email protected]
LabVIEW Developer / Design Engineer
Job Description
The LabVIEW developers at Greening work in a cross functional team environment under multiple Certified LabVIEW Architects that guide and train the developers. Developers spend the majority of their time programming Test and Automation applications in LabVIEW™. Developers also participate in the system design including the selection of sensors and data acquisition hardware. Developers are required to travel for the commissioning or startup of their projects.
The successful candidate will be a motivated fast learner as this is a fast paced and growing group. Developers will be tutored through the National Instruments certifications for LabVIEW. This is an ideal position for a programmer or engineer that is seeking to become an expert LabVIEW programmer.
Education Preferences: BSEE, BSCE, or BSME
Experience in the any of the following technologies is helpful:
Hardware: National Instruments PC Based DAQ, FieldPoint, PXI, IOTech DAQ, Embedded Controls, Industrial Computers, sensors, and wiring
Software: LabVIEW, TestStand, Visual Basic, CAD programs (AutoCAD, TurboCAD)
Integration: Data Collection, Motion Control, Real-Time Embedded Systems, Machine Vision, Industrial Automation, Distributed Control Systems, Database Design, SCADA Systems, Sensor Selection, Signal Wiring MethodsDear Sir/Madam,
This is in reference to your mail regarding job vacancy at your esteemed organization. This kind of opportunity, which I am eagerly waiting for. I am very confident that I can prove my excellence if I get an opportunity in your organization. Being an enthusiastic engineer, I look forward to working with your organization, where in I undertake to put my abilities, skill set and experience as an input and the growth of my career and company name and profits as my output.
I have a sound and 4+ years of constant exposure towards Software Development in LabVIEW and TestStand.
I am a Masters graduate in Electrical Engineering and I am Certified LabVIEW Associate Developer (CLAD). Expertise programming with hardware interfaces like VISA, GPIB, PXI, USB...etc and I offer myself with flexibility in working and relocation is not a constraint for me.
Presently I located in Germany and working with National Instruments selective Partner company. I am very much enthusiastic to relocate to USA.
My resume is available upon request. Please mail me at [email protected] I will be at your convenience.
Thanking you Sir/Madam,
With Kind Regards,
Sashidher Gundogi -
LabVIEW Programmer Full Time Position, Livonia, Michigan - Join are team of programmers
LabVIEW Programmer POSITION
Revolutionary Engineering, Inc. is dynamometer testing systems integrator and services company. We provide systems and services for the automotive industry as well as in-house dynamometer testing. We currently have a position open for a LabVIEW Programmer. A brief description of the positions responsibilities and benefits are summarized below. If you are interested please e-mail me at [email protected]
Position Available
Full Time LabVIEW Programmer
Requirements
Bachelors Degree
LABVIEW programming experience, CLD a plus
AutoCAD Experience a plus
Experience with Microsoft Office Software
Ability to work with other technicians, engineers, and customers
Ability to communicate technical information both verbal and written
Responsibilities Include (but not limited too)
LabVIEW Programming
Control System programming and interfacing
Design and build assistance on dynamometer systems
Electrical and mechanical print review
Benefits
Paid Vacations
Full Medical
Paid Sick Days
Competitive Salaries
Please check out our website at www.revoleng.com
regards,
Daniel E. White
Revolutionary Engineering, Inc
36865 Schoolcraft Rd
Livonia, MI48150Dear Sir,
I learnt about your need for LabVIEW Programmer from your company’s website. I am interested in this job profile which is mentioned in your website. Moreover I aspire to work in a technical company of my field.
I believe that my LabVIEW knowledge and my education background are appropriate for your requirement , I am attaching my resume for your consideration.
Thanks in advance.
Regards,
Devi S.
Programmer analyst trainee,
Cognizant technology solutions,
Chennai.
PH: 91-09789069507
Attachments:
Devi_Sadasivam.doc 48 KB -
How to start a second labview programme automatically when first programme is aborted ?
Hi,
I have two independent labview programme. I want to run one programme at first. Second programme should start automatically if first programme is aborted by clicking abort button. Could you please help me in this regard.
ThanksWould it not be better to close the meters when you close the application and have your application exit gracefully rather than having it start another one?
(You can call an executable from within LabVIEW using the System Exec VI but I don't think you need that here)
Certified LabVIEW Architect, Certified TestStand Developer
NI Days (and A&DF): 2010, 2011, 2013, 2014
NI Week: 2012, 2014
Knowledgeable in all things Giant Tetris and WebSockets -
Labview Programmer Job Opening - Santa Clara, CA
Software
Engineer/LabView Programmer
OptiMedica
is looking for an experienced Software Engineer/LabVIEW Programmer to support
the development and production of its expanding line of innovative ophthalmic
instruments. Candidate must be familiar with LabView programming and Software
best practices, be familiar with medical device environment and its
regulations, and have the ability to quickly solve challenging problems. Candidate will function as a key software architect
for complex medical systems.
Strong skills and
experience with LabVIEW programming for FPGA, LabVIEW applications, and higher
level applications on Windows operating systems are required in order to develop
automated test, measurement, data acquisition, and control systems. Must be able to work with limited
guidance/supervision and be able to test, evaluate, document, qualify and
release designs for complex projects involving medical laser equipment in a
focused, highly collaborative multidisciplinary environment.
Skills/Experience
Requirements:
o
Highly
developed problem solving, communication and collaborative skills.
o
At
least five years experience developing automated test, measurement, data acquisition,
and control systems using LabVIEW. Experience
developing OEM products a plus.
o
At
least five years experience working with product development team to transfer new
products into production for commercial sale.
o
Key
participation in the test and integration of successfully shipped medical
products is strongly preferred.
o
Successful
track record delivering innovative software solutions to complex problems.
o Familiar with
Electrical Safety, EMC/EMI Qualification Testing & Design Requirements for
Medical Equipment.
o
Fast
and eager at learning and applying new technology.
o
Familiarity
and experience with verification and validation phases for medical device
software.
o Knowledge, experience
and understanding of software development standards.
o
Experience
with lasers, optics, motion control, and image processing.
o
Experience
with National Instruments hardware (especially FPGA); experience with a variety
of programmable instruments a plus.
o
Experience
using structured, specification driven, requirements-based approach to software
design and development.
o Must be well
organized and enjoy working in a dynamic environment.
o Facility with Qt, MATLAB and C++ beneficial.
Responsibilities:
o
Design,
develop, qualify, implement and release designs for FDA-approved medical laser
equipment using LabVIEW.
o
Support
R&D, Production, and Field Service of FDA-approved medical products in the form of
automated tests and control systems using LabVIEW.
o
Participate
in design review and hazard/risk analysis meetings.
o
Create
test procedures to verify the safe and proper software operation of FDA-approved
medical products.
o
Pursue
continuing education and certifications, including NI Certified LabVIEW
Developer and Architect.
o
Work
in a team environment with other engineers (of varied disciplines) as well as executives
and manufacturing personnel to sustain existing products and deliver new
products to market.
o
Apply
software principles and concepts to evaluate new designs for function and
performance. System integration of new
components and designs into high performance optical and opto-mechanical systems
and sub-systems.
o
Collect/
review data and communicate both status and recommendation on technical issues
by preparing technical reports and presentations.
o
Initiate,
execute & review product changes via OptiMedica’s ECO process.
o
Provide
continuous support for manufacturing and resolve complex manufacturing issues.
o
Develop
test methods, system test procedures and create test and qualification reports
for new product introduction.
o
Reports
to Director of Product Development.
Education Requirements:
o
Bachelor’s
degree in Computer Science, Electrical Engineering or equivalent strongly
preferred.
Site Location/Contact
Information:
o
Santa
Clara, California
Note:
Candidates must be legally authorized to work in the United States.
NOTE: This job description is not intended to be
all-inclusive. Employee may perform
other related duties as negotiated to meet the ongoing needs of the
organization.
Contact:
Debbie Goedicke - 650-585-6784
[email protected]Labview Programmer
Maybe you are looking for
-
How can I print black and white
I would like the option of printing in black and white from my iPad. Does anyone know if this is possible? Just hooked up Epson XP -600 AirPlay wi fi printer. Does this require an app? Prints fine in color.
-
How do I get Exchange Tasks to display on the mavericks Reminders app
How do I get Microsoft Exchange 2010 Tasks to display on the mavericks Reminders app? please help me i have contacted Apple Technical Support...which is not worked out for me! thanks
-
Let me know exact purpose of Free memory statement...
What happens when we write the statement like below: Free memory id ZBTS_BAPIRET2'. Kindly let me know exact purpose of that .! Akshitha.
-
Pooled Connection not supported in oracle forms 11g
Dear all, I am using oracle from builder (11.1.1.4) and oracle database 11g Release 2. I can connect to the database from oracle forms 11g, when I use a dedicated or shared server connection mentioned in the tnsnames.ora file . But I want to use the
-
Overriding Defaults for "Reply To" and [Reply] "From
When I reply to a message, Mail selects values for the Reply To field and the From field. I can override these manually, but is there a way to set a different default? I could not see any way to do this with Rules. I suspect there is a way to write a