How 2 assgin a character value to the auxillary cell

Hi,
I'm assigning a character value to the auxiliary cell in the macro. But it gives me a dump. So do let me know can I assign a character value to the auxiliary cell ( I need to display this value for the alert text).
Thanks,
Siva.

Why are you trying to use a character in the planning book - why not a representative value in numbers
but if you HAVE to use characteristic then you can also try to use the notes functionality (right click on a cell and go to notes if you have not seen this )
These notes are usually anchored to a cell. These notes are stored in a table (check in se 16 with wildcard on notes ) and is associated to the value of a cell
So if you can reference a cell value and put in the conditons to the values on it you might be able to manipulate the values in the table for notes and this will cause the notes in the interactive planning boo to change accoring to the value of the cell

Similar Messages

How to get maximal value from the data/class for show in Map legend

I make WAD report that using Map Web Item.
I devide to four (4) classes for legend (Generate_Breaks).
I want to change default value for the class by javascript and for this,
I need to get maximal value from the class.
How to get maximal value from the data/class.
please give me solution for my problem.
Many Thx
Eddy Utomo

use this to get the following End_date
<?following-sibling::../END_DATE?>
Try this
<?for-each:/ROOT/ROW?>
==================
Current StartDate <?START_DATE?>
Current End Date <?END_DATE?>
Next Start Date <?following-sibling::ROW/END_DATE?>
Previous End Date <?preceding-sibling::ROW[1]/END_DATE?>
================
<?end for-each?>
o/p
==================
Current StartDate 01-01-1980
Current End Date 01-01-1988
Next Start Date 01-01-1990
Previous End Date
================
==================
Current StartDate 01-01-1988
Current End Date 01-01-1990
Next Start Date 01-01-2005
Previous End Date 01-01-1988
================
==================
Current StartDate 01-01-2000
Current End Date 01-01-2005
Next Start Date
Previous End Date 01

How to select multiple values from the parameters in BI Publisher report

How to select multiple values from the parameter drop down in BI Publisher, and how to handle this mulitple values from the report sql...

Hi kishore,
I have used all the steps as you mentioned in your previous reply....including checking Mulitple Selection Check Box..
Iam able to get the results when I am selecting one value..
and also I am able to handle multiple values the in the query by using IN :Parameter, but seems when we select more than one value from the parameter drop down i think the Bi Publisher is sending the values in concatenated form something ilke
ex: "'ACCOUNT','HR','SALES'" ,and when trying to display the parameters values in the output, its throwing the error as 'missing right paranthesis' ....on the whole do you have any solution which would handle
1.Single selection.
2.Multiple selection.
3.'ALL' Values.
4.Separating the concatenated string into individual strings and dispaly them on the output of the report..etc..in case of Mulitple selection.
Ex:
Concatenated String from BI Publisher:"'ACCOUNT','HR','SALES'"
Expected Output on the report:ACCOUNT,HR,SALES
reply to this would be much appreciated....
thanks,
manoj

How to select multiple values from the Parameters in the concurrent program

How to select multiple values from the Parameters defined in the concurrent program...and i believe multiple selection is not a direct feature of EBS, but is there any workaround solution to acheive mulitple selection?

I think there's no way to do that using standard feature.
Some workaround I use :
1. If the number of selections are fixed, you could use multiple parameters for the same valueset. For example :
Selection1 : <choose first selection>
Selection2: <choose 2nd selection>
..etc.
If you don't use it then leave it empty.
2. Use text varchar valueset and enter it manually and separate by comma (or other value) , eg : selection1,selection2,selection3....etc.

How to display(binding) values in the table from more than one node?

Hi,
I have two nodes (TRIPS & AMOUNTS)in the context. How to bind these values into the table control?
When i bind second one, first one is getting replaced.

Hi Mog,
Of course it is possible to create a table from attributes of more than one node, and in some cases this is still necessary, but you have to do this the hard (manual) way.
If you have a table control, have a look at the properties and the elements belonging to it.
First of all, there is the property "dataSource", which binds to a multiple node (let's name it TableRootNode). This means that for each element of THIS node, one row is created. In each row the data of exactly one element of this TableRootNode is displayed.
Then you have columns in this table. Inside of the columns there is a header and an editor. The editor is the interesting part.
Normally the primary property of this editor is bound to an attribute of the TableRootNode. Then everything works as expected. If it binds to an attribute of a subnode (SUB) of TableRootNode, then in row i the data of the subnode of the i-th element of TableRootNode is displayed. There is no need for SUB to be a multiple node, but it must not be a singleton.
If you bind a property of the editor to an attribute, which does not lie in the subtree of TableRootNode, then you will see the same value in each row.
Now it depends on the structure of your context. Take the node, which is relevant for the change in each row (I assume it is TRIPS) and bind the table to the node as you are used to. Then for each additional column, you have to create a new column in the tree, create a new header element with a title and a new editor (e.g. textview or inputfield) and then bind the right property of the editor to the corresponding attribute in node AMOUNTS).
If these 2 nodes do not have parent-child-relationship, the tip to create a new node, which consists of the attributes of both nodes is the only solution.
Ciao, Regina

How to set default values on the screen painter parameters?

Hello ABAP Gurus,
I would just want to ask how to set default values on the screen painter parameters.
Thank you for your replies.

Hi,
To set default values for screen painter parameters initialize the field names with default values in the PBO module....
say u have the field name as f_field1....
in the PBO of that screen initialize it....
f_field1 = '100' "here 100 is the default value.
<b>reward points if useful.</b>
regards,
Vinod Samuel.

How to add field value to the standard table

Hi,
How to add field value to the standard table?
for example:
when we go to TCODE SE16-> VBAK table -> on the selection screen if we press F4 against VBTYP we get all the available values for that field. How to add a new document Category value to this field so that it shows up in F4 help for that field.

Hi Asif,
I don't think it is possible and feasible for adding new field value to the field VBTYP because it is not possible through SPRO.
If u see the domain of this field VBTYP we have fixed values provided by SAP. There is no value table for this. If u have value table then it will be updated through SPRO. But still if u really want to add some value u can do that by getting access key and add the value in the fixed values of the domain. But of no use other than simply displaying in F4. Because for what ever value u created here there will be no documents in VBAK or any table using this domain.
Hope this is clear for u.
Thanks,
Vinod.

How to pass a value to the export parameter for a method (public instance)?

Hello,
I am trying ABAP OO newly. How to pass a value to the export parameter for a method (public instance) called in a report? This *export parameter has a reference type of structure.
Thanks in advance,
Ranjini

Hi,
"class definition
class lcl... definition.
public section.
method m1 imporitng par type ref to data. "now you can pass any reference to the method, but this way you have to maintain this reference dynamically inside the method (you can't be sure what that reference is really "pointing" at)
endclass.
"in program
data: r_lcl type ref to lcl...
create object r_lcl.
call method r_lcl
exporting
par = "pass any reference variable here
Regards
Marcin

How is it possible to split the table cells in Pages, Version 5.1

How is it possible to split the table cells in Pages, Version 5.1?

This is a feature removed in the change from Pages 09 to Pages 5.0.1.
If you need this facility, revert to Pages 09. If you upgraded to 5.0.1, then the earlier version is still in your Applications folder in a folder called iWork.

How to convert character value to_date?

I want to change the time (hours) in sysdate to '10' and then save this new date into a date column for that i've written the following command
(TO_CHAR(SYSDATE,'DD-MON-RRRR')||' 10:'||TO_CHAR(SYSDATE,'MI:SS AM'))this command will remove the actual hours in sysdate and change it with the value '10'. but the result of this command is a character value. and i want a date value to insert into a date column. for that i've converted this command to_date as follows
TO_DATE(TO_CHAR(SYSDATE,'DD-MON-RRRR')||' 10:'||TO_CHAR(SYSDATE,'MI:SS AM'))but it gives the following error
ORA-01830: date format picture ends before converting entire input string
how to do this?

Gul wrote:
I want to change the time (hours) in sysdate to '10' and then save this new date into a date column for that i've written the following command
(TO_CHAR(SYSDATE,'DD-MON-RRRR')||' 10:'||TO_CHAR(SYSDATE,'MI:SS AM'))this command will remove the actual hours in sysdate and change it with the value '10'. but the result of this command is a character value. and i want a date value to insert into a date column. for that i've converted this command to_date as follows
TO_DATE(TO_CHAR(SYSDATE,'DD-MON-RRRR')||' 10:'||TO_CHAR(SYSDATE,'MI:SS AM'))but it gives the following error
ORA-01830: date format picture ends before converting entire input string
how to do this?TO_DATE(TO_CHAR(SYSDATE,'DD-MON-YYYY')||' 10:'||TO_CHAR(SYSDATE,'MI:SS AM'),'DD-MON-YYYY HH:MI:SS AM')

How to get multiple values from the list

I've a list of an item which I queried it from the database. I also created a button that will takes a selected items from the list when it was clicked. I used javabean to get the data from database.
<%     // clicked on Select District Button
Vector vselectedDistrict = new Vector();
Vector vdistrictID = new Vector();
String tmpSelectDistrict = "";
tmpSelectDistrict = request.getParameter("bSelectDistrict");
if(tmpSelectDistrict != null)
     // get multiple values from the list
     String[] selectedDistrict = request.getParameterValues("usrTDistrict");
     vselectedDistrict.clear();
     vdistrictID.clear();
     if((selectedDistrict != null) && (selectedDistrict.length != 0))
                       for(int i=0;i<selectedDistrict.length;i++)
               vselectedDistrict.addElement(selectedDistrict);
          vdistrictID = dbaseInfo.getcurrentDistrictID(nstate,vselectedDistrict);
          for(int i=0;i<vdistrictID.size();i++)
               out.println("district = " + selectedDistrict[i]);                         out.println("district ID= " + vdistrictID.get(i).toString());
%>
// get vdistrict from the database here......
<select name="usrTDistrict" size="5" multiple>
<%     for(int i = 0; i< vdistrict.size(); i++)
%>
     <option value="<%=vdistrict.get(i).toString()%>"><%=vdistrict.get(i).toString()%></option>
<%
%>
</select>
<input type="submit" name="bSelectDistrict" value="Select District">
Lets say the item that i selected from the list is 'Xplace' and I clicked on the Select District button,
what I got is this error message:
org.apache.jasper.JasperException: Unable to convert string 'Xplace' to class java.util.Vector for attribute usrTDistrict: java.lang.IllegalArgumentException: Property Editor not registered with the PropertyEditorManager
So where is going wrong and what the message means?. Any help very much appreciated. Thanks

These are just guesses that might hopefully steer you in directions you haven't looked in yet.
I presume you used triangle brackets (< >) to avoid having the Jive Forum think it was the "italics" tag?
Are you certain this: dbaseInfo.getcurrentDistrictID(nstate,vselectedDistrict);
expects a Vector as its second parameter? And returns a Vector?
I don't believe you've shown how you use the javabean, or its code? Perhaps it should be rewritten to accept an array of strings instead of a Vector?

How to get multiple values from the db using select

hi all,
i am using oracle 9i database
i created a procedure
create or replace procedure sample_proce
as
to_i varchar2(50)
begin
select to_id into to_i from sample where flag in('y');
dbms_output.put_line('hai'|| to_i);
end;
when i executed this procedure the following error occurred.
error at line 5 fetching too many rows.
but when i execute the select query alone i can able to view all the rows.
how to resolve it

i used the following procedure
create or replace procedure sample_proc
as
begin
for s in(select to_id from sample where flag='y')
loop
dbms_output.put_line(s.to_id);
end loop.
end;
it is executed fine. i can able to fetch all the rows.
how to pass all these values into the another procedure.
we usually pass only one value into another procedure, i do no how to pass all the values . please help me.
Thank u.

How to get a value from the previous element (XSLT/XPATH gurus ahoy!)

Hi All,
I am building an RTF template for a "letter of reference"-report. Sometimes there are several rows in the data, that need to be printed as one. This is due to consecutive temporary contracts, which will be printed out as one period of service.
Here's a simplified data example to illustrate the problem.
<ROW>
<START_DATE>01-01-1980</START_DATE>
<END_DATE>01-01-1988</END_DATE>
</ROW>
<ROW>
<START_DATE>01-01-1988</START_DATE>
<END_DATE>01-01-1990</END_DATE>
</ROW>
<ROW>
<START_DATE>01-01-2000</START_DATE>
<END_DATE>01-01-2005</END_DATE>
</ROW>
With the data above, I should print two lines:
01-01-1980 - 01-01-1990
01-01-2000 - 01-01-2005
I need to compare START_DATE of an element (except for the first one) with the END_DATE of the previous element, to find out whether to print the END_DATE for that element or not. How can I get that value from the previous element?
Thanks & Regards, Matilda

use this to get the following End_date
<?following-sibling::../END_DATE?>
Try this
<?for-each:/ROOT/ROW?>
==================
Current StartDate <?START_DATE?>
Current End Date <?END_DATE?>
Next Start Date <?following-sibling::ROW/END_DATE?>
Previous End Date <?preceding-sibling::ROW[1]/END_DATE?>
================
<?end for-each?>
o/p
==================
Current StartDate 01-01-1980
Current End Date 01-01-1988
Next Start Date 01-01-1990
Previous End Date
================
==================
Current StartDate 01-01-1988
Current End Date 01-01-1990
Next Start Date 01-01-2005
Previous End Date 01-01-1988
================
==================
Current StartDate 01-01-2000
Current End Date 01-01-2005
Next Start Date
Previous End Date 01

How to Get Parameter Values from the URL ?

Hi,
I have built a calendar called cal_test. I am calling this calendar with this URL:
http://.../pls/.../xyz.cal_test.show?p_arg_names=p_sc_id&p_arg_values=2&p_arg_names=_start_date&p_arg_values=FEB-2002
In the 'Additional PL/SQL Code' tab of cal_test, I need to call a procedure which requires me to pass in as parameters the values of p_sc_id and startdate embedded in the URL named above. How can I retrieve these 2 values from the URL ? Any advice will be appreicated !
Dorothy

Hi Daniel
The following thread might help;
if not, you could try posting the question in Application Server » Web Dynpro Java
Thanks
Kenny

How to get updated values from the loops while they are running

Hello,
I am having difficulty solving a very basic problem, how to access the updated values from the 'FOR loop' while its running? Basically, the VI I am currently working on calls two sub VIs. Each sub VI has a for loop, and both VIs may or may not run for same number of iterations. My goal is to read the values at each terminal inside the loop of both sub VIs, in the Main VI. I tried to achieve it using Global Variables, but in main VI it displays only the last iteration value from both sub VIs. Could anyone please tell me whrere am I going wrong? Is there any other/better way to achieve this.
I appreciate any input on this issue.
Kudos are (always) welcome for the good post. :-)
Solved!
Go to Solution.

Dennis,
In attached VI, I can see the values changing in the sub VI from the main VI with the numeric indicator whose reference is passed on to the sub VI. Now if I wanted to store or use those values how do I do that? I tried to chnge the indicator to control and read from it (in the attached VI) , but the the indicator updates only once. Tried to create a property node and read the Value from it and it didn't work either.
Thanks in Advance!
-Nilesh
Kudos are (always) welcome for the good post. :-)
Attachments:
main-1.vi ‏8 KB
sub-1.vi ‏9 KB

How 2 assgin a character value to the auxillary cell

Similar Messages

Maybe you are looking for