How about a limbal ring enhancement tool?

In the vicinity of the red eye tool, it would be nice to have a limbal ring enhancement tool which would obviate the need to go into Photoshop and mess around. Limbal rings are the dark or-black rings that separate the iris from the white and are considered a facial attribute. Such a tool should have a feathering and opacity option to make it look natural.

Sorry about the repeated post above. I've looked through the brush presets panel and checked the Lynda.com offerings, and I can't find any directions for settings that will vary the opacity of a brush according to hand pressure. There seem to be plenty of variables, most of which I can't imagine using, but who knows? At any rate, greater-or-lesser stylus pressure yielding greater or lesser transparency, opacity, call it what you will, isn't there. As usual, terminology can be a problem. How do I find it if I don't know what it is called? I need a photoshop eraser that will erase less or more completely dependig on whether I brush the stylus lightly or with greater pressure. Does such a thing exist, and if so what is it called? Is the setting in Photoshop itself, or in the Wacom preferences? IF it's in Photoshop, what, again, is it called? And where is it? As I said, if you haven't used it before, the brush presets panel can present a fairly unintuitive and unhelpful face.

Similar Messages

Q: How to expose EEWB custom enhancements via Web Service Tool

How do you expose custom enhancements so that when Selecting Attributes (step 2) of web service tool, you will be able view your custom enhancements? We are able to see the our enhancements via GENIL_MODEL_BROWSER. However, the enhancements are not carried forward to the Web Service Tool, any pointer or help would be rewarded with points.

Hi Michael,
I have a similar requirement, just wanna know how did you solved this?
Could you please share your solution?
Thanks...
//Abhishek

How to eliminate a field created by Application Enhancement Tool

Hello All,
I´ve created some fields with Application Enhancement Tool and now i need to delete one of then. When i select at webclient to delete it, system says that i need to do manual steps to eliminate the field. Can anybody tell me what are this manual steps?
Another thing, is there any way to update entries of combo fields created by AET without being at webclient?
Thanks in advance!
Rafael Morcelli

Hi,
could you send me the text which describe the manual step?
As far as I know the only manual step that you have to do after deleting the AET field is remove the field from the UI Configuration.
Updating the entries of the entries of the combo field(dropdown list box) can be done via AET.
Technically, you can also directly edit the generated Domain. However, I would not recommend you to do this.
It is better, if you update the entries via AET.
Regards,
Steve

I presently use iCloud and run a laptop PC plus an iPad2 and an iPhone 4. I plan to travel and want to take my netbook, rather than the laptop PC for travelling. How do I get my apple tools to work mwith a new, temporary PC?

I presently use iCloud and run a laptop PC plus an iPad2 and an iPhone 4. I plan to travel and want to take my netbook, rather than the laptop PC for travelling. How do I get my apple tools to work mwith a new, temporary PC?

ayorico15 wrote:
It's not the pictures I'm worried about. I can get them off my phone without iTunes.
You can export ONLY Camera Roll photos and videos.
ayorico15 wrote:
All my apps were downloaded from my new apple ID. Not his.
Sign in to iTunes Store (on desktop itunes) with your ID. Plug your iphone to itunes, right click on it and choose transfer purchases.Right click again and choose backup. Then you can sync with iTunes.
ayorico15 wrote:
It's not the pictures I'm worried about. It's all my saved conversations
Your conversations will not deleted if you sync with your iTunes.
What is the problem with iCloud? iCloud has nothing to do with iTunes syncing.

My husband uses adobe cs5. The clone tool isn't working and after resetting the tools adobe bridge now goes to picasa. How can we make the clone tool work and have bridge go to cs5 not picasa?

My husband uses adobe cs5. The clone tool isn't working and after resetting the tools adobe bridge now goes to picasa. How can we make the clone tool work and have bridge go to cs5 not picasa?

A lot more information about your hardware and software is needed.
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CC", but something like CC2014.v.2.2) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
a screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

How can I add ring tones to my iPhone?

How can I add ring tones to my iPhone? I just got an iPhone 5c and I am clueless about these things.

There are old posts that reference this but if you Google "How to make ringtones for iPhone" you'll find some detailed instructions on how to create and convert songs into ringtones. Your other option would be to buy ringtones from the iTunes store but it's really easy to make them yourself out of songs you already have

How can I use the move tool to drag ONE pixel at a time?

The move tool is stuck to snapping at ~20 pixels at a time, so when I try to move a layer by a few pixels, its super frustrating. I dont want to have to use the arrow keys, I should be able to drag wherever I want.
How can I stop the move tool from snapping? I want to drag things precisely. I am zoomed at 100% if that makes a difference. I cant find anything about this under Preferences.

kelly-bot wrote:
Thanks for the tip, but like I said, I dont want to always have to use the arrow keys. Is it not possible to actually DRAG one pixel at a time? I recently upgraded to CC from CS3 and I keep running into things that feel like a downgrade. Super disappointed.
Our posts overlapped there. Are you saying you could reliably drag one pixel with CS3?
What other issues are you having? Things like the Crop tool can feel strange at first, but I promise you you'll never want to use Classic mode once you get used to it.

How do I extend ring time on calls?

How do I extend ring time on calls?

Are you asking about how long before it goes to voicemail? If that is the question, then you need to contact your carrier. They are the ones that control that. It is not done at the phone level, that is carrier level settings. It is not based on rings, it is based on time. They may be able to extend it for you.

How to disable Setting button in Tools - Options - Advanced - Network..i've read an article that solved this problem..but thats problem contains web adress that couldn't be opened..any other solution??? thanks before best regard

How to disable Setting button in Tools - Options - Advanced - Network..i've read an article that solved this problem..but thats problem contains web adress that couldn't be opened..any other solution???
thanks before
best regard
-ariansyah-

You can disable or remove that button, but that won't prevent users from making the changes on the about:config page directly.<br />
You can lock the related network.proxy prefs if you do not want users to change the connection settings.
See:
*http://kb.mozillazine.org/Locking_preferences
* http://kb.mozillazine.org/network.proxy.type
* http://kb.mozillazine.org/network.proxy.%28protocol%29
* http://kb.mozillazine.org/network.proxy.%28protocol%29_port

Will Labview VIs developed on a MacIntosh run on a Windows PC? How about visa versa?

Will Labview VIs developed on a MacIntosh run on a Windows PC? How about visa versa?
Thanks,
Dennis U

As long as you don't use platform specific tools (such as IMAQ vision, ActiveX...), or advanced DAQmx functions, LabVIEW portability between platforms is excellent.
On MacIntosh, LabVIEW works fine with virtual PC, but is very slow (5-10 times...). Try it and see if it suits you needs.
Message Edité par chilly charly le 01-09-2006 09:19 AM
Chilly Charly (aka CC)
E-List Master - Kudos glutton - Press the yellow button on the left...

Can anybody tell me how to install the soft phone tool in Interaction Center?

Hi,
Can anybody tell me how to install the soft phone tool in Interaction Center?
Regards
Raju

Hi Yoro,
it depends on your environment - if siemens provides some kind of SAP connector for CRM, then you can even work with deskphone. The CTI server is always responsible for communicating with both terminal and CRM server.
Example: customer calls through IVR and finally reaches operator with deskphone and CRM. The CTI server will ring the hardphone and at the same time sends signal Alerting with additional data to SAP CRM. The signal is communicated via SOAP using web service call.
The agent hear ringing from the deskphone and he can see on his CRM Interaction Center caller's number, associated name and company, which options the caller selected in IVR and so on. Now based on the CTI capability, he can click Accept in CRM and the call will picked by the deskphone, or he can reject the call, again from CRM.
In case you use siemens softphone then again, the CTI talks to both softphone and SAP CRM server. CRM simply does not care, whether the CTI channels the call to a softphone or a hardphone..
Ask your vendor for SAP connector for CRM, if there is any. Different CTI vendors supplies their connector (and usually license them separately). For instance, Genesys has Gplus adapter for SAP, Cisco offers its partner's solution from Bucher+Sutter, Solidus has also some licensed connector and so on.
What I have described is a server-server scenario. In such case, the CRM does not care where is the terminal, because the CTI takes care of it.
However, I have also seen one solution based on client-client integration. In that case, CRM Interaction Center talks to a softphone directly on operator's workstation. This is not supported by SAP and must be delivered on project basis.
Regards,
Dawood.

How do I uninstall the Google tool bar?

How do I uninstall google toolbar from Safari 5.1 OS X Lion.
I didn't down load the toolbar and I can not find any reference in Google about uninstalling or deleting this tool bar.

Hi thank you replying however, I'm not refering to the google search bar in the tool bar of Safari itself thei is a Black bar that runs under the "Book Marks Bar" it is below the Tabs when I am using them.
At the left side of the screen within the browser pan the Black Google Search Toolbar has my email address and a gear icon and on the right side of the black google search bar are seveal menu option running left to right that inclue "Web, Imagaes, Video,Maps Shopping, News, Gmail and More then a small drop down arrow with yet more options.
This is definitly an unwanted "after market" option!

Q: I don't understand how to use the teeth whitening tool in PSE 9.

I've been going through the tutorials and following along pretty good but i got to the Perfect Portrait guided edit and didnt' get how to use the Teeth Whitening tool...it seems to select the teeth but then I'm lost....what am I supposed to do at that point after the marching ants are marching around the teeth?

I’m not sure what’s going on, but obviously something is not happening.
You could also try the dodge tool (keep pressing the letter O on your keyboard) until you see the blue dodge tool. No selection necessary.
Enlarge your image to about 200% and use the square bracket keys to increase or decrease the cursor size to fit the area to be whitened. Set exposure in the options bar to about 50%. Gently brush over the teeth area until you get them as you like.

How do I make the Brush Tool remember settings for each new stroke?

Using
Windows 7 x64
Illustrator CC 2014
I'm finally attempting to draw directly in Illustrator and already want to shoot myself.
How do I make the Brush Tool remember stroke size and profile?
I need each stroke to be tapered at both ends and be a certain stroke size.
But each stroke I make, I have to edit that one path to be correct.
What gives?

Got some results today so I'll share.
Thanks again for reminding me about the 'basic appearance setting'.

How can i redownload rings tones without paying for them again?

How can i redownload rings tones without paying for them again?

Most, but not all, content on the US iTunes Store is available to download again through iTunes in the Cloud (a couple notable exceptions seem to be TV Shows that don't have "seasons", such as The Daily Show, Colbert Report, etc.). For more information about downloading past purchases you should take a look at http://support.apple.com/kb/HT2519

How about a limbal ring enhancement tool?

Similar Messages

Maybe you are looking for