How about a new API look for you and yours?

Here the new Sun Java2 API:
http://java.sun.com/j2se/1.5.0/docs/api/index.html
Here my new stylesheet version for the SDK 1.4.1:
http://geocities.com/delfidin/docs/api/index.html
See, if you like it, read the green message to download the stylesheet on the page.
Cheer~z!

Here the new Sun Java2 API:
http://java.sun.com/j2se/1.5.0/docs/api/index.html
The style sheet is the same as its ever been, clear simple and easy to read
Here my new stylesheet version for the SDK 1.4.1:
http://geocities.com/delfidin/docs/api/index.html
See, if you like it, read the green message to
download the stylesheet on the page.
Do you want the diplomatic answer or the plain blunt truth?
Cheer~z!
Errm, we'll call you OK?

Similar Messages

How about two SDN "blogspaces" : one FOR points and 1 NOT FOR points ?

I suggest that the current SDN logspace be divided into two subspaces:
one for points: this is where technical and/or non-controversial messages would be posted and be rewarded according to the current rules
one not for points: this is where folks would post "controversial" messages (technical or non-technical) that would not get any point reward.
I would personally prefer to post in the "not for points" subspace, for several reasons.
But I'd prefer to see what others have to say before saying what they are.
By the way, there's a US expression "preaching to the choir". The new blog (for no points) would be for those who are not necessarily "preaching to the choir".
djh

david,
i think i do understand your intention and therefore agree with you.
IMHO, the blogsphere here on SDN, as execellent as it is, is kind of a 'posing platform' rather than a discussion space. People do post their contributions, receive their points reward and expect some congratulations and cheering if anything at all. I happened to me that people got upset when I questioned the use or correctness or usefulness of some of the content of their blogs. When it did this with the intention to discuss matters, I recognized that people actually didn't want to discuss their contributions.
Of course the things said above do not hold true for for a big number of contributors.
The same thing thing in the forums. A lot of people do provide very valuable answers but often not discuss matters when points are already given.
So having a discussion area, free of the rewards system's pressures might be a helpful addition. Something like a discussions corner. In Vienna we call this 'Kaffeehaus'
A place where you post some free thought where you don't have to justify the minimum blog reward points, where you don't have to apply the care expected in drafting a blog, etc..
Just freestyle discussion on useful or not so useful topics.
regards,
anton

What would it mean to you and your team if you won a Markie in 2015?

I wanted to thank all of you who emailed a question, sent a tweet and or submitted a nomination for the 2015 Markie Awards! We are tallying the results and will begin judging to select 4 finalists for each category. I spoke with one of the customers whom I worked with when I was in services to provide some guidance regarding their submission -- a great story, with metrics always wins. I asked them this very question and the response I got was very inspiring -- "this is a great opportunity to recognize the awesome efforts of our team to become more modern". I now want to ask this question of all of you. What would it mean to win in 2015 for you and your team?

Our mantra at ACTIVE is "One team, one goal." even though the teams are separated into different departments: Demand Generation, Marketing Operations and Inside Sales, we all partner and work together to make big things happen. Oracle Eloqua is the platform we count on every day to help drive leads and revenue but it's the combination of the team and the tool that brings a new program to life like our "Failed to Reach" Nurture program that brings in revenue that we simply could not have achieved if we didn't pull together. Winning a Markies award for me and my team would mean the world to us and also would help validate to the rest of our business that we are not just "an execution engine", we are the revenue engine that drives a significant part of the business.

My requirement is to update 3 valuesets daily based on data coming to my staging table. What is the API used for this and how to map any API to our staging table? I am totally new to oracle and apps. Please help. Thanks!

My requirement is to update 3 valuesets daily based on data coming to my staging table. What is the API used for this and how to map any API to our staging table? I am totally new to oracle and apps. Please help. Thanks!

Hi,
You could use FND_FLEX_LOADER_APIS.UP_VALUE_SET_VALUE to upload them from staging table (I suppose you mean value set values...).
You can find a sample scripts if you google around.
What do you mean "how to map any API to our staging table" ?
You should do at least the following mapping (which column(s) in the staging table will provide these information):
- the 3 value sets name which you're going to update/upload (I suppose these are existing value sets or which have been already created)
- the value set values and description
Try to start with something and if there is any issues the community could then help... but for the time being with the description of the problem you have provided, that's the best I can do...

My mac 10.8 does no have the file, com.apple.desktop. plist I wentto lIbrary, preference and look for it and it is not where in my mac. I also launch time machine and file is no where on my Mac. How do I get this file back?

My mac 10.8 does no have the file, com.apple.desktop. plist I wentto lIbrary, preference and look for it and it is not where in my mac. I also launch time machine and file is no where on my Mac. How do I get this file back?
thanks

System files are hidden by default in Finder now, search for what you want then click the little + button on the top right of the bar that appears when you do a search. A new bar comes up and click the first box (that says "Kind"), change it to "System Files". Then change the box that says "aren't included" to "are included" and your file should show up.
http://osxdaily.com/2009/02/25/show-hidden-files-in-os-x/

How do i find a recent backup from on icloud. i don't want to restore on my iphone, just view on my Pc and keep as file. looking for pics and video i recorded thanks

How do i find a recent backup from on icloud. i don't want to restore on my iphone, just view on my Pc and keep as file. looking for pics and video i recorded thanks

The password is set on the WiFi router providing the service, by the owner of the network to prevent unwanted "guests" accessing the network. The only way to know it is to ask the owner permission to use the network. Otherwise, you have to find a free WiFi hotspot that doesn't require a password.

I got a new iphone 5c for Xmas and my laptop is registered with my iphone 4, which I no longer use or have hence the new phone lol. How do I remove the old info and register my new phone? Will it let me?

I got a new iphone 5c for Xmas and my laptop is registered with my iphone 4, which I no longer use or have hence the new phone lol. How do I remove the old info and register my new phone? Will it let me?

You do not register the phone with the laptop. If you are using the same Apple ID on the new phone as the old, you will have no trouble. Connect the phone and you can restore from a backup of the old phone, or just sync your new phone if it is already set up, with the laptop, managing your content in iTunes.

How to create new starting conditions for a workflow of shopping cart

Hi all,
How to create new starting conditions for a workflow of shopping cart
SATYA

Excecute SWB_COND
Creating New:
Click on Create button. If you cannot see that it could be a authorization issue
then Business Object: BUS2121
Double Click the event linkage for one step workflow
Define the expressions, Check Consistency and click on Traansfer
Start Condition is created. If it is not Active click on the Red Button to make it Active
Editing Already existing:
Click on Edit Button If you cannot see that it could be a authorization issue
then select Business Object: BUS2121
Click on the condition part (White area) of the start condtion needing editing
Change the expressions, Check Consistency) and click on Traansfer.If it is not Active click on the Red Button to make it Active

We got 2 new iphones one for me and one for my mom i synced mine and it backed up, when i did my moms first sync everything got wiped out and it turned into my phone how can i undo this there is no back up except mine ios 5.0.1 iphone 4s

we got 2 new iphones one for me and one for my mom i synced mine and it backed up, when i did my moms first sync everything got wiped out and it turned into my phone how can i undo this there is no back up except mine ios 5.0.1 iphone

I have 3 iPhones and 3 iPod syncing without problems on one computer.
Go to Settings > General > Reset > Reset All Settings.
On your mum's iPhone go to Settings > General > About > Name - put in your mum's name so that iTunes can tell them apart.

The on/off button on my 6th gen iPod nano recently got spoilt and I sent it back to the shop for a repair/exchange a week ago. Now I have just found out about the new 7th gen iPod nano and I am wondering, can I get the new one as a replacement?

The on/off button on my 6th gen iPod nano recently got spoilt and I sent it back to the shop for a repair/exchange a week ago. Now I have just found out about the new 7th gen iPod nano and I am wondering, can I get the new one as a replacement?

No. You can turn your 6G Nano in to be recycled at your local Apple Store for a 10% discount towards the purchase of a new one. Otherwise, your only other option would be to sell the iPod on Craigslist or eBay and use the proceeds from the sale towards the purchase of the new 7G nano.
B-rock

How quickly does photo stream sync for you?

how quickly does photo stream sync for you?

I have seen some posts floating about here complaining that photos don't or at least don't immediately sync to all devices. I think a small number of these people may not realise that syncing requires wifi and not 3G, one must also remember this community is like a doctors surgery, it is where people come if they have aches and pains.

How to create a new document type for PO and Requisition

Hi All
Can you please help me with the steps of creating a new document type for PO and PR. Also the steps that need to be update for the procure pay cycle to work properly.
Once the document type is been created. I want to create the PO referecing the new PR and PO document type.I am new in MM.
Thanks, Ros

Hi,
1. You can create new PR and PO docu types at the following path:
For PR docu type:
First you need to create number range for docu type or you can use existing number range also. The path for creation of no. range is
SPRO>Materials Management->Purchasing->Purchase Requisition->Define Number Ranges
Then create PR docu type at below path and assign no. range to PR docu type here only
SPRO>Materials Management->Purchasing->Purchase Requisition->Define Document Types
For PO docu type:
Follow same procedure as mentioned for PR docu type. Path is
SPRO>Materials Management->Purchasing->Purchase Order->Define Number Ranges
SPRO>Materials Management>Purchasing->Purchase Order->Define Document Types
If you want to create PO referencing new PR docu type, link the PR docu type to PO docu type at below path:
SPRO>Materials Management->Purchasing->Purchase Requisition->Define Document Types--> Link purchase requisition - document type
Regards
Chetan

How do i unblock plug ins for you tube?

how do i unblock plug ins for you tube?

Click here and install the latest version of Flash.
(78960)

How to set up Airport Extreme for 11ac and 11n?

I have just purchased the new Airport Extreme (August 2014) because Apple's website states
Simultaneous dual-band support.
AirPort Extreme features simultaneous dual-band 802.11ac Wi‑Fi. That means it transmits at both the 2.4GHz and 5GHz frequencies at the same time. So no matter which band your wireless devices use, they’ll automatically connect to the best available band for the fastest possible performance.
I have number of Macs in my home from a new MacBook Pro with Mavericks to a Macbook Air with Snow Leopard (due to required software) and iPads.
So after setting up the new Extreme my new MacBook only accesses 11n as does my older Macs. I checked by holding down the option key while clicking the WiFi icon at the top of my Mac. Well, not so automatic then as I was expecting 11ac and 3 times faster access (as stated by Apple).
I then looked for some documentation for setting up but cannot find anything.
Hence my question here.
How to set up Airport Extreme for 11ac and 11n simultaneously?
At present the new Extreme is no better than my previous 2 year old one.
Thank you.
Michael

How to set up Airport Extreme for 11ac and 11n simultaneously?
Assuming that it is operating correctly, 802.11ac and 802.11b/g/n are broadcast simultaneously by default.
Simultaneous dual-band support.
AirPort Extreme features simultaneous dual-band 802.11ac Wi‑Fi. That means it transmits at both the 2.4GHz and 5GHz frequencies at the same time. So no matter which band your wireless devices use, they’ll automatically connect to the best available band for the fastest possible performance.
That is advertising. The real information is usually found in the small and hard to read footnotes:
Based on theoretical peak speeds. Actual speeds will be lower.
AirPort Extreme is based on an IEEE 802.11ac draft specification. Performance based on comparison with Apple’s 802.11n products. Comparison assumes AirPort Extreme network with 802.11ac-enabled computer. Speed and range will be less if an 802.11a/b/g product joins the network. Accessing the wireless network requires a Wi‑Fi-enabled device. Actual speed will vary based on range, connection rate, site conditions, size of network, and other factors. Range will vary with site conditions.
Since the 802.11ac signal is being broadcast only using the 5 GHz band, some users report that they have had better results by using the option to assign a different name to the 5 GHz band, and then pointing their Mac to that specific signal or network. You may want to try that option.
But first as a test, please locate the MacBook Pro about 10-15 feet or 3-4 meters from the AirPort Extreme with clear line-of-sight between the two devices. Restart both the AirPort Extreme and the Macbook Pro and then check to see if the Mac is connected to an 802.11ac signal.
If not, please power off your other wireless devices...computers, mobile devices, etc. temporarily, and try the same test again.
Please report on your results.

Vista looking for drivers and BSODs

I bought a 3TB MyCloud device a few months ago. I cannot get it to work properly with my Windows Vista desktop and support refused to help. They remoted in and accessed the device without using their software and claimed it was a Windows problem, not theirs. When I connect the device directly to my Ubee Wireless Router/Switch, Windows Vista immediately sees it as new hardware and tries to find drivers for it. Of course WD does not provide these. In Device Manager, it shows up under Other Devices with a warning indicator because there are no drivers installed. I was able to copy files to the device, but when I try to access them from the device, my Windows Vista desktop gets a BSOD (this happened after the call to support). I've now disconnected the device from my network as the constant BSODs damaged my computer. The device works with my Windows 8.1 computer, but has problems with my Sony Blu-Ray player connected wirelessly to the network. I've posted about this in a different thread. Is there a way to get this working properly with Windows Vista?

Bennor wrote:
The BSOD that other thread talks about appears to be related to using one of the WD apps, my guess is the WD My Cloud Desktop app on their Windows PC. There is a known issue for some who use the WD My Cloud Desktop app where once that app is opened, some users experience Windows Explorer crashing. There is one or two other threads covering this very specific Windows Explorer crashing issue related to that WD My Cloud Desktop app that affects a few users. Generally one does not need to install "drivers" to access the WD My Cloud. One should be able to access the WD My Cloud on their local network via Windows Explorer (NOT Internet Explorer). It will show up in the "Network Neighborhood" or under "Network". If it is not showing up under Network then check the network settings on both the Vista PC, ensuring it has the same Network Name/Network Workgroup (typically "workgroup") that the WD My Cloud uses under "Settings -> Network -> Network Workgroup". The other recommended suggestion is to configure the WD My Cloud for a static IP. Either within the WD My Cloud administration UI or within one's router/gateway. Both the Vista PC and the WD My Cloud should be in the same IP address subnet (for example both should have an IP address in the 192.168.1.x range). If you have not done so read through the WD My Cloud User Manual in particular "Using Windows XP/Vista/Windows 7" under "Getting to the Public Share" for the general procedure of accessing the WD My Cloud shared folders with Windows Explorer on Windows Vista.You and I are worlds apart on this issue. Your solution doesn't relate to my problem. I did not have a problem getting to or seeing the device in Vista. There were two problems and I believe I've cured both of them, though I don't know how. Problem 1: Vista keeps asking for drivers. When I connected the device to my network, Vista would see the device and try to locate drivers as if it had found a new printer. It couldn't find any so I had to close the driver request windows without finding drivers. The device then would show up in Device Manager under Other Devices with a yellow exclamation mark indicating the drivers were not loaded correctly. After several BSODs (for a different issue), I ran SFC and CHKDSK on my computer. Neither program found a problem. Then when I tried to connect the device again, Vista started looking for drivers and I walked away from the computer for the evening. When I had come back, it said the drivers were loaded. In Device Manager, Vista shows a new device category named "Western Digital NAS" with two devices installed: My Cloud Network Media Server and My Cloud Network Storage. The driver problem is now solved but I don't know how. Problem 2: Files I had loaded onto the shares to learn how to use the device can be seen in Windows Explorer. That was never a problem. However, as soon as I clicked on a file, the screen would scramble and then BSOD. This only occurred with files loaded onto the MyCloud device. After some blue screens, I started up into Safe Mode with Networking. I was able to click on the files without crashing, though Media Player wouldn't play them or even start in Safe Mode. I then did a clean boot and it tested okay. As I added items in MSCONFIG, the problem would not recur. There was one item that prevented me from even setting MSCONFIG to do a normal startup, and that was Kaspersky Internet Security 2015. Not only that, but I couldn't start the software at all. I did a complete removal of Kaspersky and then reinstalled it. I no longer have any BSODs. Both issues, as mysterious as they were, have mysteriously been resolved. I have a DLNA issue, but that's in another post. I also have a new issue with the WD My Cloud desktop app but I don't need to use that and if I do, I'll start a new discussion.

How about a new API look for you and yours?

Similar Messages

Maybe you are looking for