How about "Web Previewer"?

Hi!
I want to try the "web previewer" in Form 6.0, but when I click the "Run Form Web" button in Form Layout Builder, nothing happens.
From a book "Oracle Developer Advanced Forms & Reports", page 48, it says "The web previewer is implemented through a separate program ifweb60.exe", but I can not find this program on disk (or CD). The book also confirms the program is availabe on NT, I am using NT.
Anyone have some ideas?
Thanks in advance!
My software are:
Win NT 4, OS patch 6.
Oracle Developer 6. (Forms [32 Bit] Version 6.0.5.0.2 )
Database is 8i (8.1.5.0.0)
null

You require the Oracle Developer Server in order to run the Forms on Web as well as client server. If you have just Oracle Developer, then Forms will run only as client server applications and will not have the Web Component required to run Web Forms.
Happy New Year !!
Abhijith Unnikannan
Oracle Support Services

Similar Messages

Field that is not visible in my editing screen but showing in web preview. How to remove it?

Hi Support,
When I preview my form in web preview, I am seeing a field that is not visible in my editing screen. It starts at the left margin of the web preview and runs off the edge of the right side of the page.
The form is also crashing when I attempt 'page view' or 'save as pdf' and I believe this phantom field is the culprit. I have spent considerable time on the form and do not want to recreate from scratch.
Can you please advise how I can make this field visible in the editing section so that I can permanently delete it?
Further information:
I do not have any rules set for any of my fields
I have tried to remove it in Chrome, IE and Firefox
My cache has been cleared today
My plug-ins and flash player are all current versions (updated today and performed a restart)
Thanks,
Kate

Hi Kate,
Could you please share your form with me ([email protected]) so that I can investigate and correct this problem? Instructions on sharing can be found here:
http://forums.adobe.com/docs/DOC-2462
Thanks,
Brian

How differs soft proofing in View - Proof Colors and Save for Web - Preview?

Hi, I'm currently confused with one inconsistency. My working space is Adobe RGB and I use calibrated monitor. After I finish my work on image I go to View -> Proof Colors -> Internet Standard RGB. Image looks terribly with the overall violet/purple hue. Then I open Save for Web dialogue, I check Convert to RGB and from Preview options I select again Internet Standard RGB. Now the previewed image looks as expected. The same results I get if I manually convert image to sRGB before soft proofing and saving for web. So... what's the difference between preview in Proof Colours and in Save for Web? Thank you for your opinions.

Hi 21, thank you for your input. All what you say makes perfect sense, it is exactly how it should work and how I expected it works. My problem was, that while testing this theory in practice, I have come to different results. I expected, that if I stick to the theory (meaning keeping in mind all rules you perfectly described) I should get the same result in both soft proof and save for web preview. But... it was not the case. Save for web preview offered expected results while soft proof was completely out of any assumptions and colours were totally over-saturated with violet/purple hue. Also, Edit -> Assign Profile -> sRGB gave another result then Soft Proof -> Custom -> assign sRGB (preserve numbers), but the same as save for web preview. What troubled me was why this is so.
Today I've made tests on hardware calibrated monitor and... everything works exactly as you describe and as I expected.
Then I went back to another monitor which is software calibrated (both monitors are calibrated with X-Rite i1 Display Pro). And again... I received strange results described above. So I did the last thing I thought and disabled colour calibration on that monitor. And suddenly... both soft proof and save for web preview gave the same result.
Probable conclusion: soft proof and save for web preview (together with Edit -> Assign Profile) are programmed to use different algorithm which is evident on standard gamut monitors with software calibration. Question can be closed.
Gene and 21, thank you for your effort.

How to stop iTunes web preview from automatically launching iTunes?

Any time you go to an iTunes web preview page (which a lot of app sites/reviews link to), it automatically launches iTunes, completely defeating the purpose of having a web preview page in the first place. How can I make it stop doing this? I've looked in both Safari & iTunes prefs; if it's there, I didn't see it.

It's very annoying, and I wish there was a solution too. If I click on a link to for something to iTunes, I now have a new web browser window opened that is showing the exact same thing that opened in iTunes. How pointless is that? Its to the point that I am looking for alternatives to iTunes for managing my media.

How to get info about web service caller inside Web Service

Hi..
I want to know that can we get info about Web Service Caller inside called web service..
Info Like IP Address, User Id, User Name
Regards,
Ajay Sharma

Hi,
I tested following code using JDevloper 11g
@Resource
    WebServiceContext wsc;
    @WebMethod
    public String webMethod() {
                MessageContext msgCtxt = wsCtxt.getMessageContext();
        HttpServletRequest req = (HttpServletRequest)msgCtxt.get(MessageContext.SERVLET_REQUEST);
        System.out.println("Client IP = " + req.getRemoteAddr());
        return req.getRemoteAddr();
    }It is giving me IP address but when i tested this web service from another computer there also it is giving my machine address instead of the machine IP from where the web service is called.
What is wrong in my code ?
Regards,
Ajay
Edited by: Ajay Sharma on Dec 31, 2012 1:06 PM

How to add a Web Preview Server to Eclipse Mars

I have been attempting to add a web preview server to my Eclipse Mars version. The only help I have found online is to open servers, right click, new, server then choose web preview from the IBM list.
I can not seem to find the IBM folder unless I install Liberty Profile, and even then there is no web preview server listed. Is there anywhere I can download the server to install it to my eclipse? I can't find anywhere online to do so.
Any help would be greatly appreciated. This is a fresh install of Eclipse Mars by the way.
Thanks,
Brian.

On 7/15/2015 8:27 AM, Brian Hamill wrote:
> I have been attempting to add a web preview server to my Eclipse Mars
> version. The only help I have found online is to open servers, right
> click, new, server then choose web preview from the IBM list.
>
> I can not seem to find the IBM folder unless I install Liberty Profile,
> and even then there is no web preview server listed. Is there anywhere I
> can download the server to install it to my eclipse? I can't find
> anywhere online to do so.
>
> Any help would be greatly appreciated. This is a fresh install of
> Eclipse Mars by the way.
>
> Thanks,
> Brian.
Just to confirm, am I correct in assuming the "HTTP Preview" and "J2EE
Preview" servers under the Basic category aren't what you are looking
for? I'm not aware of a "Web Preview" server.
Cheers,
Larry

Web Previewer not working in 9iDS

I'm trying to get a generated forms module to run automatically in the web previewer after I generate it. In the Forms Generator Options dialog under the Run tab I have "Run as a Web Form" and "Run Form Automatically" boxes checked. JInitiator 1.3.1.9 is installed and I believe running - the JInitiator Control Panel dialog has the "Enable JInitiator" box checked (does this need to be running?). I have also started up OC4J.
When I generate the module I get the dialog at the end stating that generation is complete but the form does not come up in Web Previewer. Furthermore, "Run the form in Web preview mode" is not in the list of the "List Actions" box in the message window.
Any ideas?
I'm using Designer 9i release 2 (v. 9.0.2.9).

I think Note 198384.1 How To Run Generated Forms via Designer 9i
is what you are looking for.
"Checked for relevance on 19-Feb-2009"
goal: How To Run Generated Forms via Designer 9i/10g
fact: Oracle Designer 9.0/10g
fact: Design Editor
fact: Forms Generator
fact: Reports Generator
fix:
When a form module is created and generated in Designer, one of the actions
available in the Build Action list is to test run the module.
However, in the 9iDS Release 2 product set, the ability to run a Form via a
Client - Server GUI interface has been removed. Instead, forms can only be
run on a Forms Service via a web browser, whether the form is being run from
Designer or from within Forms Builder.
If a Forms Service has not been setup, or is not available to the development
system, then a "reduced version" is available via software installed as part
of 9iDS Release 2 - this comprises of the Jinitiator and OC4J listener. Steps
for settings these up from a 9iDS Release 2 install and running them on the
local, client PC, are given in Note 198297.1.
To enable the Build Action "Run Form from web server" in the Design
Editor, the following additional steps need to be taken :-
1. Forms Generator Options.
Ensure that the following File Destinations are explicitly set; it is
suggested that the same directory be used :-
Forms Options tab -> Destination of Generated Files
Menu Options tab -> Destination of Generated Files
Compile -> Form Executable From Binary -> Destination
Compile -> Menu Executable From Binary -> Destination
Run -> Web Browser : Ensure this is set to a valid web browser installed
in the local PC.
If the Web Browser setting is not entered, then the "Run Form ..." action
will not be added to the Build Action list.
In addition, the following option can be checked :-
Run -> Run Form Automatically
This will cause the form to be run automatically at the end of generation,
via the Forms Service and browser.
2. Preference Settings.
The preference settings group "Web Deployment" holds the preferences that
are used to determine what Forms Service to use when attempting to run the
form from Designer.
WEBPTH (Server form location path) = The local file path where the FMB
and FMX files have been generated to. This is the File Destination set
above in the Generator Options.
WEBURL (Server base URL) = The base URL of the Forms Service.
If a "standard" Forms Service is being used, then this URL will be provided
by the administrator of the Forms Service. However, if the "reduced version"
mentioned above is being used on the client PC, the text for this value is
constructed like so :-
"http://<Local PC Name>.<Domain>:8888/forms90/f90servlet"
where <Local PC Name> is the Full Computer Name of this PC, as defined in
the
Network Identification tab of the Systems applet in the Control Panel
(for Windows 2000)
and <Domain> is the domain which this PC has logged onto, again defined
in
Network Identification tab, for Windows 2000.
Alternatively, if the PC is running stand-alone, then can be omitted.
The rest of the string - the port number of 8888 and the virtual directory
of "/forms90/f90servlet" - are the defaults used by the "reduced version"
of the Forms Service - these are controlled by the values in the file
"cauprefs.ora" in the root directory of the 9iDS Release 2 Oracle home.
These preferences can be set at higher levels than the Module - at the
Container level, or in a preference set. However, note that if the "reduced
version" Forms Service is being used on each client PC, then the WEBURL
details will be specific to each client PC - the preference will therefore
have to be updated depending on which client PC is generating then running
the form.
Comment: where speaking about 9iDS Release 2, it is also applicable for 10g iDS

Request a web preview feature

I would find it helpful to be able to preview an image as it will look outside of LR and Photoshop;s color managed environment, similar to the proofing feature in PS where you set the target as Monitor RGB. I realized no two monitors out in the world will display an image the same way, but I'm concerned about how it will look on my calibrated monitor outside of PS/LR, or even on a second, non calibrated monitor.

On 7/15/2015 8:27 AM, Brian Hamill wrote:
> I have been attempting to add a web preview server to my Eclipse Mars
> version. The only help I have found online is to open servers, right
> click, new, server then choose web preview from the IBM list.
>
> I can not seem to find the IBM folder unless I install Liberty Profile,
> and even then there is no web preview server listed. Is there anywhere I
> can download the server to install it to my eclipse? I can't find
> anywhere online to do so.
>
> Any help would be greatly appreciated. This is a fresh install of
> Eclipse Mars by the way.
>
> Thanks,
> Brian.
Just to confirm, am I correct in assuming the "HTTP Preview" and "J2EE
Preview" servers under the Basic category aren't what you are looking
for? I'm not aware of a "Web Preview" server.
Cheers,
Larry

My background image isn't lining up between my design, preview, and web preview. HELP!

I'm new to using Muse and have spent the afternoon going through online tutorials etc. I understand the fundamentals of adding an image to use as a background, but when I upload the image, it lines up completely different in design, preview, and web preview screens. I've been playing around with different settings but I can't for the life of me figure how to make my preview and web preview look like my design page.
Below are design page, preview page, web preview.
I'm sure there is some fundamental piece I'm missing here as I can't seem to find any threads with the same question being posed. If I had hair, I'd be pulling it our right about now.

1) Resize your image in Photoshop to the maximum width you require for browser display (probably ~1600px, but certainly less than than 2560px) and use Save for Web to create a JPEG of it with the lowest JPEG quality rating you can stand (or your initial page load times will be slow) and import that back into Muse. (The most likely reason the Muse Preview is blank is that this image is too large, in terms of number of total number of pixels.)
2) In the Browser Fill panel in the Fitting options popup menu choose "Scale to Fill". Scale to fill will scale the image up proportionally such that none of the black background shows. If the aspect ratio of the browser window is different than the image, then a portion of the width or height of the image will be cropped. What portion is determined by how the image is aligned using the "Position:" control in the Browser Fill panel.
Because browser window sizes vary (since they're user resizable) the display of the image will be different than what is seen in Muse Design view. However, the letterboxing/pillarboxing effect in the screenshot you provided is due to the Fitting Option being set to "Scale to Fit" rather than "Scale to Fill".

Appearance of forms in DW vs actual web preview

i was wondering why i can't get the forms in dreamweaver
design mode to look like they do in the web preview. the web
preview is great, i just would like that to show through while im
designing. it seems whenever i try to insert a form, it
automatically decides to insert half way down the div. in the
attached example the DW design mode shows the form spaced down a
few lines. i want it to start at the very top of the div. any
ideas? check the link below for a graphic of what im talking about.
much appreciated!
form
not cooperating in design mode

Try using CSS to manage the top/bottom margins on the
<form> tag.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"r2o4l7l" <[email protected]> wrote in
message
news:fhokra$f3t$[email protected]..
> hey thanks for the quick response. you'll have to excuse
my lacking of
> knowledge here, ive sort of been learning the use of css
with html and
> find
> myself working in circles for hours sometimes.
>
> here is a link to the testing site i was working with.
everything with
> the
> form looks great on here, but in design mode in DW it
looks much
> different. (
> similar to the graphic )
>
>
http://www.sixonefivedesign.com/clickfacts/testing/
>
> ultimately i want to have the logo and form sit nicely
at the top so i can
> line up the navs with that repeating background. i dont
think that should
> be a
> problem so long as i figure this little issue out.
>
> again, thanks so much
>
> mike
>

HT2493 How to change preview image of a file and NOT the icon ?

Hello dear Mac users
How to change preview image of a file and NOT the icon ?
I know how to change the icon of a file, but I wish to know how to change the preview of any file.
For example: my file is "mysong.aif", I changed the icon to be "mylogo.png" using cmd+i, cmd+v on the icon. But the preview of the file still remain the same.
I know it can be changed using iTunes, but I don't want to import all my files in iTune, and iTune cannot import all type of files.
I hope someone will understand my needs...
Thanks!

Thanks BeerbarX
You can't change the preview image for anything
hoo
QuickLook plugin
what are the plugin ?
In the case of a music file, it will be that generic black box with a note on it
That is exactly what I'm asking about !
MP3 which has a special tagging standard that can include artwork
How can I "tag" my MP3 without going thru iTunes ? Is it possible to do it dirrectly in the Finder ? Is there other type of files that can include such tags ?
Thank you for answering my question , wich I have to admit may seem useless, but I wish I could put something like a signature logo on each of the different file I produce (as AIF for music and MP4 for video clip) instead of that generic black box with a note on it, and by the meantime keeping a different icon for all of them in order to illustrate theire content.

Need Information about WEB Gui

Hi all,
I need some informatin about web gui.
What is it? It's a web application or a internet services or what?
How can I use it? IT's possible to use it in the enterprise portal?
thanks
enzo

Hello,
please have a look at https://wiki.sdn.sap.com/wiki/display/HOME/InternetTransactionServer
Best regards
Rolf-Martin

How do web front ends find the configuration database (moving whole farm to new AD forest)

We are exploring, as a possible course of action, moving our SharePoint 2007 medium farm to a different Active Directory forest (2008). There is a two way transitive trust between the source and target domains.
I have established that with such a trust it's possible to add content databases on a SQL instance in another forest, so moving content is not a big issue; we'd stand up new instances and move them: the user accounts are almost all in the target domain anyway.
However, we have a good deal of customization, including a third-party application that no longer has any support and has historically been appallingly difficult to upgrade/install fresh.
How do web front end servers find the SQL instance containing the configuration database? If the farm credentials had been previously changed to an account in the target domain, all services stopped and the configuration database moved to a new instance
with a DNS alias, would the database appear to be in the same location when SQL and SharePoint services were started on (logically) moved web front ends?

Here is more or less the high-level process for SharePoint 2007:
Mid- to high-level steps.
0. Full farm backup
1. Move users to new domain (in AD). Use stsadm -o migrateuser to migrate the old domain accounts to the new ones in SharePoint
2. Move service accounts to new domain, or create new service accounts
3. Update the farm to use the service accounts in the new domain
stsadm -o updatefarmcredentials (service accounts)
stsadm -o spsearch -farmserviceaccount
stsadm -o spsearch -farmcontentaccessaccount
stsadm -o editssp -ssplogin (for each ssp)
stsadm -o osearch -farmserviceaccount
SSO and any other remaining service accounts (CA -> Ops -> Service Accounts)
Default content access account (SSP -> Search Settings -> Default content access account)
Customizations (if there are service accounts associated with these)
3.5 Manual steps
Application pool accounts
Update permissions for SQL Logins to make sure the new accounts match the permissions for the old accounts
Add the appropriate new accounts to the DCOM IIS WAMREG Admin Service
4. Update the SQL Server service accounts. If SQL Server is shared with other applications you'll want to update the SQL Logins for these other applications as necessary and the SQL Server service accounts (DB Engine, DB Agent, Reporting Services, etc.). Might
not be necessary if this has already been done or if the SQL server is not changing domains.
5. Shut down all services on all servers in the farm (this includes SQL if you are moving to the new domain).
6. Change domain membership of all farm servers, reboot or perhaps shutdown and bring back up in the following order:
1. SQL. Verify SQL Server is running and accessible. Check event logs. Resolve any issues.
2. Central Admin server. Verify CA is accessible, check event logs. Web apps and some services may not be available if they are on servers that are currently turned off. Don't worry about these (yet).
3. Application servers, search servers, index, query, other. It's likely some or all of the WFEs will go on at this step. Verify services are accessible as expected. Check event logs. Resolve issues.
4. Any remaining WFEs. Wash, rinse, repeat.
7. Assuming everything is running as expected, users can access the sites, the sky did not fall, etc. take a full farm backup.
Hey look, here are some low-level steps too.
# updates the account used to run the CA app pool and the timer service
# must be run on the server that hosts CA
stsadm -o updatefarmcredentials -identitytype configurableid -userlogin NEWDOMAIN\farm_service_account -password Password123
# spsearch
stsadm -o spsearch -farmserviceaccount NEWDOMAIN\search_service_account -farmservicepassword Password123 -farmcontentaccessaccount NEWDOMAIN\crawl_service_account -farmcontentaccesspassword Password123
# osearch
stsadm -o osearch -farmcontactemail [email protected] -farmserviceaccount NEWDOMAIN\search_service_account -farmservicepassword Password123
# ssp service accounts
stsadm -o editssp -title SSP -ssplogin NEWDOMAIN\ssp_service_account -ssppassword Password123
# Manual steps
SSP Admin -> Search Settings -> Default Content Access Account
Application pools: CA -> Operations -> Service Accounts -> Web Application Pool (or use gl-updateapppoolaccount if available)
iisreset /noforce
Copy SQL permissions to the new accounts. Not sure why this doesn't happen.
SSP Service Account
Farm Account
Setup Account (not copied because it doesn't own anything, just used to kick off the DB for the other accounts)
Search Service
Add accounts to DCOM not sure why this didn't happen
Component Services -> Computer -> My Computer -> DCOM Config -> IIS WAMREG Service
Farm account
Application pool accounts
Search Service
SSP Service
SSP Admin
Then the fun part. Move the server into the new domain.
Check for AAMs to see if they reference the current domain. If so, change to the new one.
Stop all SP services. Join new domain.
The computer name is a netbios name in SP, this should be painless.
Some general notes from my experience doing this:
1. There is no way to update application pool identities with stsadm (I haven't explored using Powershell). You have to go through CA -> Service Accounts to update these.
2. Some SQL logins and permissions were not created. I compared the permissions before to the permissions after and copied the ones that didn't transfer. This resolved all database access issues.
3. Had to grant permissions for the service accounts in the DCOM configuration for the IIS WAMREG admin service. I expected this to happen automatically but was not surprised given the history of CLSID 61738644-F196-11D0-9953-00C04FD919C1.

How do I preview .eps or .ai files in Bridge CC?

How do I preview .eps or .ai files in Bridge CC? I only see the icon thumbnail and the file name but not a preview pic of what is in the file.
Thanks!

Sounds like normal, expected behavior, but…
A lot more information about your hardware and software is needed.
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CC", but something like CC2014.v.2.2) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
a screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

.svgz web preview in save options not working

Hi there
I'm a longtime Photoshop / After Effects type with rather less experience in Illustrator, using a newly built PC system
I've just gone to save a diagram created in Illustrator as a .svgz in order to pass to the web guy, but wanted to preview it first, so hit the Web Preview button in the Save dialogue box.... and nothing happens. I have several browser windows opn - IE9 64bit, Chrome - but the svgz appears in none of them
I presumed maybe I need to link Illustrator to a particular web browser somehow, but can't seem to find reference to how to do this, if it is necessary...
How do I get the web preview to happen?
All help appreciated...
I'm using latest Illustrator in Win 7 64bit
jON

I'm using Illustrator CS5 on Win 7 64 bit, and I cannot get Web Preview to work when suning Export, and exporting a file to Flash swf with frames. I have IE set on the Save for Web option, but no such option exists in the Export dialogue box. This option worked fine for the teacher in the help video that shows how to animate a snowboarder graphic when exporting to svf, but I cannot find anything dealing with this in the forums. Are you aware of why this is not working and how to implement it?

How about "Web Previewer"?

Similar Messages

Maybe you are looking for