How access Middleware Fusion Control?

Hello, i need know how i can use this administration tool, because i install Oracle WebLogic Server and this include the administration console(http://example:7001/console), and then I install Oracle web Tier(http y webcache), but i can not access to the URL of Middleware Fusion Control (http://example:7001/em), How i can access to this administration tool.? thank any help

Have you put the weblogic-handler settings in mod_wl_ohs.conf? Otherwise OHS won't pass the /em requests to WebLogic and will give a page not found error.
E.g. (assuming WLS is on the same host as OHS - otherwise adjust hostname accordingly)
<Location /console>
SetHandler weblogic-handler
WebLogicHost localhost
WeblogicPort 7001
</Location>
<Location /consolehelp>
SetHandler weblogic-handler
WebLogicHost localhost
WeblogicPort 7001
</Location>
<Location /em>
SetHandler weblogic-handler
WebLogicHost localhost
WeblogicPort 7001
</Location>
You'll also need the LoadModule directive etc.
HTH
Simon

Similar Messages

How to stop voice control

how to stop voice control?

Hi Joannewpark,
Press your Home Button to get to the Home Screen.
Press Settings, then press again 2x fast - you will go to the Settings screen
Press on General, then press again 2x fast - you will go to the General screen
Use 2 fingers to indicate scroll up - Voice Over will begin to read the items on the screen, and will eventually get to the Accessibility option. When it says "Accessibility" press on it, then press on it 2x fast
It will go to the Accessibility screen, tap on the Voice Over option one, and then again 2x fast, now tap on the Voice Over option again, and then double tap to turn it off.
Cheers,
GB

How to get record control in sony ericsson p1i.

How to get record control in sony ericsson p1i....
does jsr234 helps??

I'm not sure it is possible to get the PL/SQL record type through JDBC. Please try to access this procedure through JDBC to see if it is possible.
You may need to convert the record type, to an object-type, i.e. wrap the procedure in another procedure that converts the record type. You could also just wrap the procedure in another that expands the record values into individual output parameters.

Does OS installed through boot camp or in virtual machine has access and full control of the peripherals like native OS X Lion?

I am planning to buy new PC for my faculty needs and this time I am thinking to buy Apple laptop like Mac book Pro 13" or so ( I owe already IPhone and Ipad 2)
To make final decision I need few information . These are:
1. May I use Boot Camp or similar utility software to install Windows 7 OS next to OS X Lion, or use some kind of virtual box software to create virtual machines with diverse guest OS in them like Windows , Linux etc.?
2. Does OS installed through Boot camp or in virtual machine has access and full control of the peripherals like native OS X Lion?
3. May I use the same disk partitions to access to the files regardless if I am using Windows 7 or OS X Lion operating system?
4. Is there full compatibility between Microsoft Office under OS X Lion and Windows 7 M. Office?
5. What is general user experience with OS X Lion operating system comparing to Windows 7?
Thanks for sharing your experience with me.
Adnan S

adnans wrote:
I am planning to buy new PC for my faculty needs and this time I am thinking to buy Apple laptop like Mac book Pro 13" or so ( I owe already IPhone and Ipad 2)
To make final decision I need few information . These are:
1. May I use Boot Camp or similar utility software to install Windows 7 OS next to OS X Lion, or use some kind of virtual box software to create virtual machines with diverse guest OS in them like Windows , Linux etc.?
2. Does OS installed through Boot camp or in virtual machine has access and full control of the peripherals like native OS X Lion?
3. May I use the same disk partitions to access to the files regardless if I am using Windows 7 or OS X Lion operating system?
4. Is there full compatibility between Microsoft Office under OS X Lion and Windows 7 M. Office?
5. What is general user experience with OS X Lion operating system comparing to Windows 7?
Thanks for sharing your experience with me.
Adnan S
1. Yes. You can install Windows 7 natively using Boot Camp Assistant or you can install Windows 7 in a virtual machine using Parallels, Fusion, or VirtualBox
2. If installed using Boot Camp Assistant Windows 7 uses all your computer's resources just as OSx does. If installed using a VM Windows 7 will share the computer's resources with OSx.
3. A Boot Camp partition is separate from the OSx partition. The VMs allow sharing of files across partitions since both OS are running at the same time.
4. No, not 100%.
5. Too broad a question. Be specific about what feature you are asking about or search the Internet for comparisons. I use both and find they both work well.

Script error suppression in Access 2010 Webbrowser Control

I like the WebBrowser Control have an application where I use it to do online research and save the results, but on many sites, particularly University Sites, I get script errors. This is very annoying.
How can I suppress script errors in Access 2010 WebBrowser Control. Looked at the property controls and VBA does not contain the VB Suppress...script. I am at a complete loss.
Looked and Looked for solution on internet and no dice.
Help me Obi Wan (A.K.A. Albert Kallal) you're my only hope
tjf

Thanks for the kind thumbs up!
And with the recent purchase of the star wars franchise by Walt Disney, it's very possible we will see a new Star Wars movie in the not too distant future (or should I say in a galaxy not too far away?). So I'm actually looking forward to the possibility
of another star wars sequel and that would be lots of fun!
As for the script errors? Unfortunately, I don't think there is a solution.
You can check + ensure that the options in Internet explorer (advanced) are set to ensure that script errors and script debugging is disabled. However, THESE SETTINGS DO NOT carry over from Internet explorer into the web control on an access form. And in
fact you might even be using Firefox browser or something else. The web control in Access has a relative high degree of independence from your actual browser setting or even what Browser you're currently using. (and in most cases this is a good thing!).
This is a native control to Access.
If you're receiving the script errors without the user doing anything at all in that browser, I don't think you have much choice here (you can check the scriipt setttings in IE, but to my knowledge they do NOT apply). You have to see if the admin of the
web site can clean up the HTML to eliminate such errors.
Another possbile is to as others here suggest - launch the browser external as hyper link.
Albert D. Kallal (Access MVP)
Edmonton, Alberta Canada

WRT1900AC does not block internet access in Parental Control

Hi,My router does not block internet access on my other PC. I tryed "Always" tryed specific addresses, tryed IP addresses and everything tech support suggested. I even replaced the router at their advise. Nothing helped. I realize that the problem is not the router but probably my home network configuration, but I can't figure out what is it. To my defence, so couldn't they Does anybody have or had such a problem?Thank you

What Firmware version is currently loaded?Can you post screen shots of how you have the controls configured?Does the User Manual give any configuration help? Internet Service Provider and Modem Configurations
What ISP Service do you have? Cable or DSL?
What ISP Modem Mfr. and model # do you have? Router and Wired Configurations
Setup DHCP reserved IP addresses for all devices ON the router. This ensures each devices gets its own IP address when turned on and connected, eliminates IP address conflicts and helps in troubleshooting and maintain consistency for applications that need to connect as well as mapped drives.

Accessing different custom controls during runtime

Hi,
I am developing a test engine. Each test requires different data. My idea is to store all the custom controls(specific control to specific test case). I am getting a variant input and this should be converted to the custom control data type. Is there anyway to access the custom control datatype based on the test case???
Or to be more specific, is there a way to get the data type of control in a VI using VI reference???
Tnx in advance

Hi Sam.. I think u got my problem wrong... I ll explain u in asimple way.
Test 1 requires 1 boolean and 1 numeric
Test 2 requires 2 numeric
Test 3 requires 1 string
Wat I recieve is a variant containig all inputs of that particular test(Exmpl: 2 numeric for Test 2)....Now I need to convert this variant to 1 bool and 1 num(for Test 1) or 2 numeric(if Test 2) or 1 string (if test 3). Wat I thought was put all the ctrls in a folder and access it to convert the variant based on test number.(This is for future use so tht I can just add cntrls if new tests are added). Now the question is how to access this cntrl datatype for the conversion???????

Username to Access "Application Server Control"

Hi,
We are using,
EBS : 12.1.1
OS : OEL 5.6
Database : 11.1.0.7.0
I want to deploy web services on Application Tier. For that i have started iAS Console using following commands on Application Tier,
1. Sourced env File of Application Tier
2. $emctl start iasconsole
Using above command iAS Console started successfully. Now while accessing url (http://hostname:1156/emd) it asks for Username and Password with following message,
The Servertestapp.onwardinfosys.com at enterprise-manager requires a username and password.
Warning: This server is requesting that your username and password be sent in an inseure manner(basic Authentication without a secure connection)
Username :
Password :
Can anyone tell me which username and password credentials are required to access Application Server Control page ???
Regards,
Priyanka

No I am not getting any errors. Login page accepts Username and Password of user "ias_admin" and redirect's to Application Server Control Page but page shows just APplication Server and no information of it...
Information i gor after click on "About Oracle Enterprise Manager 10g Application Server Control",
About Oracle Enterprise Manager 10g Application Server Control
Oracle Enterprise Manager 10g Application Server Control     10.1.2.3.0
Supported Target Application Servers                    10.1.2.3.0
Accessibility Mode                              Disabled
"Accessibility Mode" is coming as "Disabled"... How to enable that?? Is their any confiuration required to setup Application Server Control for EBS R12 ??? Please guide..
Regards,
Priyanka
Edited by: Priyanka Pawar on Apr 9, 2012 11:17 AM

How can I to control any element of my GUI from another class?

How can I to control any element of my GUI from another class?

For that, you need the external class to have the reference to your element.. If your idea is to change basic properties like width, height etc.. then you can have the constructor of the external class to take the object of the parent of your class as the parameter and modify ..
However, if the properties to be altered/accessed are custom to your element, then you will have to have the class accept an object of your class as the parameter. No other option..
What exactly is your requirement?

Want Access Data Grid control in SharePoint 2013?

Hello everyone!
Recently we noticed something funny in SharePoint 2013. While quite many people were hoping to have the datasheet view like those in SP2007 and 2010, Microsoft has chosen a different interface to display datasheet view.
Now, if you try to create a sub site under a publishing site, and use the
Publishing Site template then try to create a datasheet view in the sub site, SharePoint will try to use the Access data grid control to display the view. In some situations the view will display and other situations it will not, and will show this
error:
The list is displayed in Standard view. It cannot be displayed in Datasheet view for one or more of the following reasons: A datasheet component compatible with Microsoft SharePoint Foundation is not installed, your browser does not support ActiveX controls,
a component is not properly configured for 32-bit or 64-bit support, or support for ActiveX controls is disabled.
If you create a sub site using Publishing Site with Workflow instead, then the datasheet view will be created properly using SP2013 interface.
Using PowerShell, we can see that both Publishing Portal and
Publishing Site With Workflow are using the BLANKINTERNET 53 template. The
Publishing Site on the other hand is using the CMSPUBLISHING 39 template.
Want to try it out and let me know if that happens to your SharePoint too?

Hi Conway,
I tested the issue in my environment per your description and it returned the results as below:
I created a subsite using Publishing site under a team site in SharePoint server 2013, the datasheet view in a list displayed as pic1
I reproduced the issue in SharePoint server 2010, the datasheet view in a list displayed as pic2
It turns out by design the datasheet view in the subsite based on Publishing site template displays as your situation. Here is an article which explains this:
http://www.sharepointblues.com/2010/03/31/data-sheet-view-not-working/
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

Single 3850(MC) how many AP can control

Hi All now i testing about 3850..
i have some question about 3850
1. how many APs can control in single 3850(MC)
if we buy Single 3850(48port) then can we use all port for AP?
2. build a MC-MA Wireless environment, If MC goes down MA Can still working without MC?(is there kind of NSF?)
3. for example MC has a AP and MA has a AP. then we can see ap only each 3850. how we can management whole APs
Prime infrastructure can see whole APs, is this only way ?. I think this is not good for management Wireless.
4. If MA has over two APs(AP1, AP2), User1 connected AP1, User2 connected AP2.
User1 need to connect with User2(FTP or something) , User1,2 can connect directly? without through of MC
MC-----------------MA
|
AP1 AP2
| |
user1 user2
if you have any answer plz talk to me.
thank you.

A 3850 can support up to 50 directly-connected APs.

How to address form controls in jsp page

Hello,
I have a very stupid question. How do i empty the textfield value in my jsp page. I know that i can make a function that does that. but i dont know how to adress the control. Its got to be something like txtfield.setValue("myvalue") but i just dont know
i cant find anything either on the internet. can somebody help me plz?
thx very much,
Kim

Hi Kim,
You can use the following JavaScript command:
document.nameField.value = theValue;
You can use this on submit of the form or in a click event at the field.
I hope it be useful

How to insert tabstrip control in module pool screen painter

Hi all!
plz tell e how to use tabstrip control in module pool screen painter.Also plz give me an example program using tabstrip control.

To insert tabstrip just open layout of screen and press on the tabstrip button there .
Use this souce code further to activate it .
CONTROLS tabstrip TYPE TABSTRIP.
DATA: okcode TYPE sy-ucomm,
dynnr TYPE sy-dynnr,
flag type flag,
active like tabstrip-activetab .
call SCREEN 100.
*& Module USER_COMMAND_0100 INPUT
text
MODULE USER_COMMAND_0100 INPUT.
data: lv_okcode type syucomm.
lv_okcode = okcode.
clear okcode.
case lv_okcode.
WHEN 'TAB1'.
dynnr = '0110'.
WHEN 'TAB2'.
dynnr = '0120'.
WHEN 'TAB3'.
dynnr = '0130'.
WHEN 'TAB4'.
dynnr = '0140'.
WHEN 'TAB5'.
"check authorization, if authorization fails
flag = 'X'. "set the global flag
active = 'TAB1'. "store active tab in global variable
dynnr = '0110'. "set the screen number
WHEN 'BACK' or 'EXIT'.
leave program.
ENDCASE.
IF lv_okcode(3) = 'TAB'.
tabstrip-activetab = lv_okcode.
ENDIF.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Module STATUS_0100 OUTPUT
text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'MAIN'.
SET TITLEBAR 'xxx'.
IF tabstrip-activetab IS INITIAL OR
dynnr IS INITIAL.
tabstrip-activetab = 'TAB1'.
dynnr = '0110'.
ENDIF.
"set the activetab explicilty here
if flag eq 'X'. "from authorization failure
tabstrip-activetab = active. "'TAB1'
clear flag.
endif.
ENDMODULE. " STATUS_0100 OUTPUT

How to handle the control records in case of file to idoc scenario.

Hi All,
can you please clarify me how to handle the control records in case of file to idoc scenario.

Hi,
In File to Idoc scenario even though you selected apply control record values from payload and you are not getting those correct values which you have provided in the mapping.
Also check the checkboxes Take sender from payload and Take receiver from payload along with the Apply control record values from payload checkbox
Regards
Seshagiri

Not able to access the mx.controls package

hi,
i found a weird issue. I'm developing my application
entirely using actionscript 3 by creating "actionscript Project' in
the flex builder. I need to use the ColorPicker component which is
under mx.controls package, but to my disappointment i'm not able to
access that mx.controls package and when i forcefully use it the
compiler throws me an error, but when i create a new flex project
and create an asctionscript file, i'm able to access that
mx.controls package and also the ColorPicker class. Can anyone tell
me what the problem is?
Thanks,
Shajahan

I am having the same issue. I'm using Flex 3 and I cannot
access the mx.controls package in any actionscript project.

How access Middleware Fusion Control?

Similar Messages

Maybe you are looking for