How accurate is the output preview?

The output preview screen sometimes jumps back to a frame from the last shot before moving forward. I'm wondering if this is normal because it's just a low quality video preview, or if my movie will be encoded with those double-take hitches. I have a very tight deadline and can't afford to waste potentially 10+ hours encoding a bad video file. Please help!
Video: mpeg2-blu ray 23.976fps, Quality 4.0, Progressive
Bitrate: CBR, 25.00Mbps

Also, I'm using AME CS6 and it's AVCHD source footage @ 23.976fps

Similar Messages

How do I set the Simulation Profile to CMYK by default in the Output Preview Window

I've just upgraded to Adobe PDF X Pro from Acrobat 6 Pro. In Acrobat 6 I could just go to Advanced> Separation Preview and it would let me check off colours in CMYK, this was useful for me to check that Blacks were full black and not registration. I work in Newspaper media and always check if Ads are using the correct colours in the Ads they supply us.
Now here's my problem, every time I open up a new pdf Ad from clients and go the output preview it always shows me the colours in Adobe RGB by default. This is very annoying especially when I have to check a ton of Ads by clicking and scrolling down to say 'Photoshop 5 Default CMYK' just so I can check the Black. Is there any way to have it like it was in Acrobat 6? And just have it always show me the output preview in CMYK by default?
Edit: Typos.

Ok, after fiddling around I've figured it out. Edit> Preferences> Colour Management> Under Working Spaces Change CMYK: PhotoShop 5 Default CMYK. Now all pdfs show up as CMYK when I click on output preview.

How to view the output maintained at handling unit level

Hi All,
How to view the output which was maintained at Handling unit level in the delivery.
Say for ex:- If we maintain the out put type LD00 at delivery level, we can view the output for the same in the change mode of outbound delivery.
In the same way how can e view the output which was maintained at handling unit level.
Regards,
Mallesh.

Hi,
Go to 'VL02N' transaction code give the Delivery number and from menu Outbound delivery select issue output to. then select the proper output type (already issued) and select the print preview button.
It is just as you see for other output's only.
Reward if it helps.
Thanks
Venkat Cheedalla.

How accurate is the speed checker?

How accurate is the speed checker? http://www.productsandservices.bt.com/consumerProducts/displayTopic.do?topicId=25795
Just had conversation with customer services where they claimed the maximum speed I could get was 6mb and the 17mb quoted in the letter was a "clerical error". I've worked out they must have been using the checker linked above but the speeds quoted aren't accurate for my connection. Does anyone else have a discrepency?

lostof wrote:
This is what I got from the hub
ADSL settings
VPI/VCI
0/38
Type
PPPoA
Modulation
ITU-T G.992.5
Latency type
Interleaved
Noise margin (Down/Up)
6.1 dB / 5.9 dB
Line attenuation (Down/Up)
35.0 dB / 18.7 dB
Output power (Down/Up)
0.0 dBm / 12.8 dBm
Loss of Framing (Local)
0
Loss of Signal (Local)
0
Loss of Power (Local)
0
FEC Errors (Down/Up)
108823 / 4294967264
CRC Errors (Down/Up)
0 / N/A
HEC Errors (Down/Up)
N/A / 0
Error Seconds (Local)
0
According to your attenuation I would hope for around 12mb on your line, that would be with the correct stats, SNR margin of 6dB which you have etc.. Although the reason I've highlighted the Output Power [Downstream] is because this should be around 19/20 and hence why you are probably not seeing the good speeds. Please contact the mods, you can do that by following this link: http://bt.custhelp.com/app/contact_email/c/4951 and ask them to get it sorted for you and then you should see the speeds
Regards Edd
Check your Line
BT Speedtester

How to store the output of a analog to digital converter into an 2D array

Hi
I am doing my M.Tech Thesis in Image reconstruction and I am using labview for simulation and I want to know how to store the output of a analog to digital converter into an 2D labview array.

nitinkajay wrote:
I want to know how to store the output of a analog to digital converter into an 2D labview array.
How exactly are you performing 'Analog to Digital'???
Grabbing image using camera OR performing data acquisition using DAQ card OR some other way????
I am not allergic to Kudos, in fact I love Kudos.
Make your LabVIEW experience more CONVENIENT.

How to download the output of a report along with column header

Hi,
Could someone please tell me on how to download the output of a report along with column header to .txt format. A download option needs to be given to the user using physical and logical file names .The report basically contains header details and item details and requirement is to download the same format into an .txt format.

Hello,
Try this FM:
Data: being of itab occurs 0,
matnr like mara-matnr,
maktx like makt-maktx,
end of itab.
data:begin of fld_tab occurs 0,
fld_name(20),
end of fld_tab.
fld_tab = 'Material'.
append fld_tab.
fld_tab = 'Material Desc'.
append fld_tab.
CALL FUNCTION 'WS_DOWNLOAD'
   EXPORTING
        BIN_FILESIZE            = ' '
        CODEPAGE                = ' '
         FILENAME                = 'C:\1.txt '
         FILETYPE                = 'DAT'
        MODE                    = ' '
        WK1_N_FORMAT            = ' '
        WK1_N_SIZE              = ' '
        WK1_T_FORMAT            = ' '
        WK1_T_SIZE              = ' '
        COL_SELECT              = ' '
        COL_SELECTMASK          = ' '
        NO_AUTH_CHECK           = ' '
   IMPORTING
        FILELENGTH              =
     TABLES
          DATA_TAB                = itab
          FIELDNAMES              = fld_tab
   EXCEPTIONS
        FILE_OPEN_ERROR         = 1
        FILE_WRITE_ERROR        = 2
        INVALID_FILESIZE        = 3
        INVALID_TYPE            = 4
        NO_BATCH                = 5
        UNKNOWN_ERROR           = 6
        INVALID_TABLE_WIDTH     = 7
        GUI_REFUSE_FILETRANSFER = 8
        CUSTOMER_ERROR          = 9
        OTHERS                  = 10
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Regards,
Naimesh

How to see the print preview of outgoing excise invoice.

Hi Experts,
How to see the print preview of outgoing excise invoice.
Thanks,
srinivas.

Dear Sreeni,
Just go to J1IIN, click on "Exc.inv for delivery -- Display" where you input delivery reference and execute. If you have generated excise invoice, you can see the corresponding excise invoice for that delivery / billing document.
Preethi.

How to use the Output clause for the updated statment

How to use the output clause for the below update stament,
DECLARE @MyTableVar table(
sname int NOT NULL)
update A set stat ='USED'
from (select top 1 * from #A
where stat='AVAILABLE' order by sno)A
Output inserted.sname
INTO @MyTableVar;
SELECT sname
FROM @MyTableVar;
Here am getting one error incorrect syntax near Output
i want to return the updated value from output clause

see
http://blogs.msdn.com/b/sqltips/archive/2005/06/13/output-clause.aspx
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

How to change the output as text format in Apps R12.1.3

Hi All,
Currently iam trying to modify the Java Concurrent Program (FDExtractAndFormatting) in Batch Payment Process. This Program is generated in text format in 11i APPS. Now we are upgrading to R12.1.3. In R12.1.3 output is coming as PDF format. Here my requirement is how to change the output as text format in R12.1.3 also.
Please do the needful and suggest me.
Regards,
Jagadeesh

1. It is seeded java concurrent program. Some attributes are missing from 11i to R12. In 11i it is a text format.So i have to investgate on how to retrive those attributes in R12. What is the concurrent program name?
Have you tried to change the output and submit the request?
2. Once all are attributes are coming in PDF format. Client wants to open same output in text format as it is 11i (In R12 it is generated in PDF format).If the above does not help, please log a SR.
Thanks,
Hussein

How to download the output of two reports in WebTemplate into excel sheet?

How to download the output of webtemplate which consists of two reports in one Web Template into same Excel sheet?

hi sunil,
here is the HTML code for 'export to excel'

<td class="SAPBEXNavLine"> <SAP_BW_TEXT program="SAPLRRSV" key="T72">" src="Mime/BEx/Icons/S_X_XLS.gif" border=0 ></td>
you can also use BEx download scheduler to download the precalculated webtemplate report to excel sheet.
Check the link below.
https://websmp104.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700000401962004E
i think this will help u
regards,
sindhu.

How to send the output to PDF format in reports 6i?

Hi,
How to send the output to PDF format in reports 6i? I given Mode = BITMAP.
DESTYPE = File, DESFORMAT = PDF, DESNAME = C:\x.pdf.
Report is running fine. But PDF file not generated. I don't know what i missed. Any one can help this?
Thanks
Kavitha

Hello,
Do you get this problem only for DESFORMAT=PDF ?
Test with :
DESFORMAT = RTF, DESNAME = C:\x.rtf
or
DESFORMAT = HTMLCSS, DESNAME = C:\x.html
does it work ?
Check if DESNAME is modified in the reports itself.
Regards

How to get the output of the report in pdf format

how to get the output of the report in pdf format?
Thanks in advance,
madan.

Refer these links
http://www.sap-img.com/bc037.htm
http://www.members.tripod.com/abap4/Save_Report_Output_to_a_PDF_File.html
CONVERT_ABAPSPOOLJOB_2_PDF FM convert abap spool output to PDF

How to get the output of my batch file or script file

Hello,
I am a beginner in java and I have to run a batch file(in win) or a script(in linux). I want the output of the file in my java program. How to read the output. I used the following code and it always gave me the empty string output
Runtime r = Runtime.getRuntime();
Process p = null;
p = r.exec("./test.bat"); //./test.sh
int res = p.waitFor();
BufferedReader br = new BufferedReader(new InputStreamReader(p.getInputStream()));
String tempStr = "", str = null;
while((str=br.readLine()) != null) {
tempStr += str + "\n";
System.out.println(tempStr);
I know this is a simple one but it's taking a lot of time. Can any one there help me quickly.

hi
the below function works well for me..
just make a try with it
protected String runConsoleCommand(String command) throws IOException {
Process p = Runtime.getRuntime().exec(command);
InputStream stdoutStream = new BufferedInputStream(p.getInputStream());
StringBuffer buffer = new StringBuffer();
for (; ; ) {
int c = stdoutStream.read();
if (c == -1)
break;
buffer.append( (char) c);
String outputText = buffer.toString();
stdoutStream.close();
System.out.println("the output to file is:"+outputText);
return outputText;

How to get the output of Standard HR forms in PE51

Hi Experts,
How to get the output of standard HR forms available in PE51 Transaction for coutry grouping 99.
Please advice.
Regards,
IFF

Hi
Use the t code for country grouping 99....PC00_M99_CEDT - Remuneration Statement. to get the variant in tcode PC00_M99_CALC_SIMU - Simulation.
Like this test for all the standard forms, what all are the available in PE51 for country grouping 99

How to save the output of sap script to pdf document in sap

hi abapers
how to save the output of sap script in sap so that can retrieve the saved document later.
i have to save the rcia output from sap script in pdf document in sap so that it can be retrieved later
how to use dms

Hi deepika,
This thread will solve ur problem OTF -> PDF
Regards,
Pravin

How accurate is the output preview?

Similar Messages

Maybe you are looking for