How add a page in Pages

Hello. I use a template and can not add page, even it is indicated that I just need write a texte and the pages will automatically be added.

Hello jooe15,
Thank you for the question. It sounds like you would like to insert a new page in the document you are working on in Pages for iCloud beta. You can add a new page by creating a page break using these steps:
Add a line or page break
If you want to move text to the next line or page, you can insert a line or a page break. A line break, or a soft return, starts a new line without starting a new paragraph. A page break moves the line of text to the top of the next page.
Add a line or page break
Click where you want the text break to occur.
Do one of the following:
Add a line break: Press Shift-Return.
Add a page break: Click Insert Page Break in the Text pane.
Pages for iCloud beta Help - Add a line or page break
http://help.apple.com/pages/icloud/1/#/gil2bc7f5230
Thank you for using Apple Support Communities.
Best,
Sheila M.

Similar Messages

How can I add an existing cfm page to a project?

CFB3 Question: How can I add an existing cfm page to a project? I created a project and copied a file into the project folder but I can't seem to find a way to add the cfm file into the project.

@Carl - Well heck, yes I did... But after reading your response I went back and tried right-clicking on and refreshing different things and what worked was right-clicking on the project name in the Navigator window and then clicking on refresh in that context menu.
Thank you Carl!

How to add a watermark in Pages 5.0

Hello!
Could anyone please explain to me how to add a watermark in Pages 5.0
Thank you

Hi have found the solution. You need go into the View menu and make sure that you have checked the Show Invisibles option. Once you can see the invisibles, you should see a blue line at the top of the "blank" page with a small "document" icon at the right of the line. You need to delete this blue line/icon which will delete the whole page as long as there are no other "invisible items" which may also need to be deleted.
I did the above and my blank page disappeared from the thumbnails view immediately.

How to create a control and add it to a page layput

I am reading the following link :-
http://www.itidea.nl/index.php/what-about-you-must-fill-out-all-required-properties-before-completing-this-action-when-publishing-a-page/
which says that i need to create a control and add it to a page layout. but can anyone help me in understanding how i can create a user control and add them to page layout ?
Thanks

> First problem i could not find a User Control (Farm Solution only) under the Office/SharePoint section
if you mean New item in Visual Studio, then check it under general Web category. User controls are basic ASP.Net functionalities, not Sharepoint-specific. If it is not there, you may use the following trick:
1. Create new project in other VS instance using "ASP.Net Empty Web Application" template
2. Add new user control there (in this project type it should exist for sure under Web category. Called "Web User Control")
3. Copy all user control's files to the folder of your Sharepoint project (ascx, ascx.cs, ascx.designer.cs)
4. In VS instance with Sharepoint project add existing items: all copied user control files. They should be grouped under ascx file automatically after that
> The type or namespace name 'TaxonomyFieldControl' could not be found (are you missing a using directive or an assembly reference?)"
you need to add reference to Microsoft.SharePoint.Taxonomy.dll assembly, which is located in the GAC (assume that you have installed Sharepoint on your dev env)
Blog - http://sadomovalex.blogspot.com
Dynamic CAML queries via C# - http://camlex.codeplex.com
thanks a lot for your help. so can i do the following steps:-
I follow these steps to deploy a user control.
using Visual Studio 2012 , i added a new Farm solution.
then inside the farm solution i added a new User Control(Farm Solution Only).
3. inside the user control i entered the following code:-
using Microsoft.SharePoint;
using Microsoft.SharePoint.Taxonomy;
using Microsoft.SharePoint.WebControls;
using System;
using System.Web.UI;
using System.Web.UI.WebControls;
using System.Web.UI.WebControls.WebParts;
namespace WikiPopUp.ControlTemplates.WikiPopUp
[ToolboxData("<{0}:CustomValidationRequiredFieldsOnPage runat=server></{0}:CustomValidationRequiredFieldsOnPage>")]
public class CustomValidationRequiredFieldsOnPage : WebControl
protected override void CreateChildControls()
base.CreateChildControls();
if (SPContext.Current.FormContext.FormMode == SPControlMode.Edit)
bool arethere = AreThereAnyMissingRequiredFieldsOnPage();
if (arethere)
//SPPageStateControl:
//Provides an ASP.NET control that handles the Ribbon buttons controlling the state of a Microsoft SharePoint Server wiki or publishing page,
//such as the CheckInCheckOutButton or the PublishingButton.
SPPageStateControl baseParentStateControl = Page.Items[typeof(SPPageStateControl)] as SPPageStateControl;
//Publish button: SPListItem MissingRequiredFields checks this.FieldHasValue(link.Name, field);
//the field is empty (which is right) when the page is first created (MMD field is never filled in)
//when the field was once filled, saved and emptied the field in sp code still has the previous value and the check MissingRequiredFields succeeds
//after succeeding this check the page is validated (this.Page.Validate()) and this one fails which results SP validating the page as the Save button does
if (baseParentStateControl.HasError)
//this overwrites the previous PageErrorState
//and validates the page
//no popup anymore and status updates in yellow area
baseParentStateControl.EnsureItemSavedIfEditMode(false);
else
//there are missing fields at this listitem, but they're not on the page
//do nothing here, because the SerializedErrorState contains the navigate url to the Edit Properties page
//and a message pops up
/// <summary>
/// Check if required fields are missing which are present at the page
/// </summary>
/// <returns></returns>
private static bool AreThereAnyMissingRequiredFieldsOnPage()
foreach (Control control in SPContext.Current.FormContext.FieldControlCollection)
//get the control type
string type = control.GetType().Name;
FieldTypes controlType = (FieldTypes)Enum.Parse(typeof(FieldTypes), type);
switch (controlType)
case FieldTypes.TaxonomyFieldControl:
TaxonomyFieldControl tfc = control as TaxonomyFieldControl;
if (!tfc.IsValid)
return true;
break;
default:
break;
return false;
enum FieldTypes
DateTimeField, FieldValue, TextField, RichImageField, NoteField, RichHtmlField, PublishingScheduleFieldControl, TaxonomyFieldControl, BooleanField, ComputedField
4. i add a reference for the Sharepoint.taxnomy
5. then i deploy the solution to my site collection. and now i can see the new solution inside the farm solution under central administration.
but not sure if these are all the required steps to register the user control or still i need to do extra steps ?

In Firefox 4, how do I change the order of plugins on the Add-ons Plugins manager page (I turn Shockwave Flash on only to see videos - having it off prevents screen freezing - and so I want it stay at the top of the list)?

In Firefox 4, how do I change the order of plugins on the Add-ons Plugins manager page? I turn Shockwave Flash on only when I want to watch a video and then turn it off to prevent screen freezing, and so I want it to PUT it and KEEP it at the top of the list.

Hit Ctrl+0 (That's a zero, by the way). I'm not sure if it will work, but hey, that's the first thing I would try.

Facing Master Pages, how do I make them reassign themselves to left or right when I add an odd # of pages?

I've been designing a travel journal & photo book series, and my process is that I have Master Pages A-D, facing. I'll put in all the text (Masters B, Left and Right), then I go back through and insert the photo pages between the correct dates. This generally works fine when I'm adding an even amount of photo pages, but if there happens to be an odd amount of photos for a specific date, then in shifts all the following pages so that instead of the two facing pages layouts being LEFT/RIGHT, it shifts to RIGHT/LEFT:
This is how it should look (LEFT/RIGHT):
But then if I add a right-oriented photo page, like this:
it them shifts everything following it (RIGHT/LEFT), like this:
At first, I thought it was just the text pages, because the design requires every text box on a LEFThand page to be centered, but the RIGHThand ones to be left of center, but If I add a LEFThand photo page inbetween the two incorrectly oriented pages in the previous photo, the photo page does the same thing:
While doing this fixes the pages following it (because it's now an even amount of pages that have been inserted), I don't understand why inserting a RIGHThand layout into a RIGHThand slot doesn't correct it. If I drag the Master Page INTO the page (as opposed to adding a page), I get this dialog box:
(note: this does NOT happen if the orientation of the facing pages is the correct one) I looked at every page's size and page setting (via page tool), and they're all the same:
MY TWO QUESTIONS:
1. Why does this happen and can I fix it/keep it from doing that?
2. Is there a way to select an option or something that shifts everything so that if a text page starts as a LEFThand page, but then gets shifted over one, it'll change to a RIGHThand page? (I'm using CS6 for Mac Snow Leopard)
Thank you so much!

Why does one page have a different orientation than the others? If it is printed, you should keep all same size and orientations, exceptions only for pages which have different final sizes!
You should set up you margins on the master page according where the text frames should be. But your frames are somehow laying on your pages without any relation to the margins borders.
When you add an odd number of pages—it doesn't matter how—, it will shuffle succeeding left pages to the right, right pages to the left. That is how it is, except if you keep spread together or you don't allow to shuffle pages.
If you want to adjust the content from a left page to a right page layout and vice versa you have to use either Layout Adjustment (correct margins are VERY important) or the new Liquid Layout Concept, good descriptions to learn this complex thematic are in the manual and in linked tutorial movies.
If you insert a page based on a master it will use on the left side of a spread the left side of the master's spread and on the right side of a spread the right master's spread, if you grab the left or right side has no influence.
Another influence comes from your text styles, used in keep options in paragraph styles. There you can determine that the paragraph style forces a headline to the left or to the right. Important with headlines in longer layouts.
You should give your master more identifying names, not A-Master, B-Master, but like TIT-Titel, STA-Standard, but this is not the main problem here.

How do you create a custom button in LiveCycle to add a new form page to an existing form?

Can someone tell me how to create a button to add a new form page to an existing form in Acrobat or Livecycle designer?

Hi,
You can use addInstance method to achieve your requiremnets.
form1.#subform[1].instanceManager.addInstance()
BR,
Paul Butenko

How can I add a language on pages (Greek) to check the spelling when that language is not on the list?

how can I add a language on pages (Greek) to check the spelling when that language is not on the list?
I can see other languages available for spelling check, but not Greek and I dont see how to add it.
I have added the Greek keyboard on the Mac, so I can write in Greek , but I dont know how to check the spelling in Greek on pages

You can try to add a 3rd party spellchecker
http://milaraki.com/blog/2010/11/greek-spelling-at-pages-how-to/

How do I add a page in pages (iCloud pages).

How do I add a page in pages, right off the bat making a document was easy but I can't figure out how to add a page. Im sure there is some super easy thing that I am missing. I would have assumed to add a page once you were in your document you could just scroll down too far or go to file new page, but in file all that shows up is the normal file commands of safari. (New file, New tab,Open file.. and so on)

Hello jooe15,
Thank you for the question. It sounds like you would like to insert a new page in the document you are working on in Pages for iCloud beta. You can add a new page by creating a page break using these steps:
Add a line or page break
If you want to move text to the next line or page, you can insert a line or a page break. A line break, or a soft return, starts a new line without starting a new paragraph. A page break moves the line of text to the top of the next page.
Add a line or page break
Click where you want the text break to occur.
Do one of the following:
Add a line break: Press Shift-Return.
Add a page break: Click Insert Page Break in the Text pane.
Pages for iCloud beta Help - Add a line or page break
http://help.apple.com/pages/icloud/1/#/gil2bc7f5230
Thank you for using Apple Support Communities.
Best,
Sheila M.

How to add totals for each page in main window

hi
i have problem in scripts
how to add total in first page ending and carry it to second page , at the end of second page again adding total and so on until last page.
very urgent
regards
ratna

Hi,
Check these
http://help.sap.com/saphelp_40b/helpdata/en/d1/8035c3454211d189710000e8322d00/content.htm
http://membres.lycos.fr/jolyeric/SAP/Note_de_Cours_Ben/Sapscript/SAPscript_Control_Commands.doc
try to use the command 'summing' along with one text symbol .Keep the if condtion when page changes at that time u dispay the total as ur keeping the total in text symbol it can be dispayed in the next page
or this is round about way
loop at <table>.
call write_form.
endloop.
here u declare a variable 'c' and increment it by 1 in each loop. Then u chgeck if the program has started printing second page then u can print the number of records before printing the next page.
eg :
data : c type c value '0'.
loop at <table>.
c = c + 1.
call write_form.
endloop.
in form:
check when the next page is being printed, then u can print the number
of lines 'c'.
Feel free to revert back.
--Ragu

How do you create a button to add a new form page to an existing form in Acrobat or Livecycle designer?

Can someone tell me how to create a button to add a new form page to an existing form in Acrobat or Livecycle designer?

In Acrobat forms you can use the 'template' object's 'spawn' metod. A Lesson in Templates for Adobe Acrobat by Dave Wrigtht

Does any know how to add web clips to Pages on iPad?

Does anyone know how to add web clips to Pages in iPad? Thanks in advance.

i have no idea how they were lost - i think i must have updated the ipad and then i found the documents to be lost ? i restored the last back up which should have had the documents but to no avail??

How to add a Comment to a specific PDF page or page element?

I'd like to share a multipage PDF and gather comments about designs presented on the different pages.
Currently comments seem to only apply to the entire PDF file and not to individual pages or elements on pages. I don't see an obvious way to add contextual annotations.
If someone adds a comment, how do I know which page they are commenting on? Perhaps they just have to write something like "Looking at page 4 I'd like to change..."
Thanks,
DAN

Thanks for the feedback. Currently you cannot comment on a specific page in the Creative Cloud.

HT5557 Using IBook, I can't seem to figure out how to insert a blank page inbetween pages that are already set up, like if you want to add some pictures or something. Anyone have any tips on this? Thanks, Mark

Using IBook, I can't seem to figure out how to insert a blank page inbetween pages that are already set up, like if you want to add some pictures or something. Anyone have any tips on this? Thanks, Mark

To enable the form to be signed in Reader you will need to open the form in Acrobat; goto Advanced>Enable Usage Rights and then save this copy of the form for sending out to the users.
The user should then be able to edit and digitally sign the form. They can then email the signed/saved pdf as a browsed for attachment or via the email icon in the toolbar. Note - if you have created an email submit button on the form, then unless they have Acrobat they could only return an xml file.
The other way to do this however is to create a dataset by 'distributing' the form. This time the Email Return button will send back a full version of the form. During the distribution setup you will have the option to email the form directly or to save it and send it later,so you can send to users as and when or even post it to a website or intranet.
When you receive and open the returned form it will ask whether you want to add it to the predetermined dataset (or if you want to categorise the returns into geographical areas for example, you could create new additional datasets at this point). If the form is data heavy however, the dataset will become very large and unwieldy pretty quickly, but you can export the data from it (including signatures) in xml format and import this into an Excel spreadsheet.
To simplify the Excel xml import process I'd recommend you carefully structure your form in the hierarchy (LiveCycle) into the order you would want the data items to appear in your spreadsheet and switch off those data items that you will not need by setting the default binding for the irrelevant fields to "None".
Clear as mud? Hope this helps.

Does anywone now how to add cambria police to pages?

does anywone now how to add cambria police to pages?

Cambria is a 'serif font that came with Windows Vista and Microsoft Office 2007, specifically designed for screen reading and to keep the good integrity of small characters when printing.' ('Police de caractères' is French for 'font'.)
Quit Pages. Double-click the font to examine it and have the option to add it to Font Book. If it's compatible with Macs it will be added to the font list and be available in Pages.

Can you add a watermark to pages and if so how?

Can you add a watermark to pages and if so how?

Hi Grant,
See Page 63 of the Pages'09 User Guide. (Download from the Pages Help Menu)
Using Master Objects (Repeated Background Images)
You may want to add watermarks, logos, or other background images that appear in the same spot on every page of your word processing documents. These repeated graphics are called master objects.
Regards,
Ian.

How add a page in Pages

Similar Messages

Maybe you are looking for