How add pointer to sports highlight movie

how do I add pointer to sports highlight video? making highlight videos of my daughter for sports recruitment. thanks

https://sites.google.com/site/karstenschluter/imovie09tricks/how-to-add-a-pointe r

Similar Messages

How add delay at end of movie

Hello,
RB (Raw Beginner) here again. Now that I have a successful
movie in place, how do I create a 20 second delay before it plays
again? I know there is a better way than creating 400 still frames
at 20fps using F5 for every single layer!
Also, unrelated..How do I change my unpalatable ID from
"3888ffni879de777" to something more useful? I have looked all
through the PROFILE and PERSONAL OPTIONS, but no help.
Thank you!

Use this script:
=======================
stop();
var interval:Number = setInterval(function () {
play();
clearInterval(interval);
}, 20000);
=======================
The 20,000 is the time of the pause, 20,000 milliseconds = 20
seconds.

How to add new line in transact move order line

Hi,
i am able to update locaotr in Transact move order.
But i want to add two locators for the same line.
I tried to insert one more record in data base, but getting error unique index error.
so how can we add new line in transact move order line .
please help to slove this isse.
Thanks In Advance
Venu.

Hi,
the fact that your question is posted in Order Management section, does the move order automatically generated by OM?
nevertheless, i don't think you should (or allowed, in this case) to add a new line in transact move order. Transact move order only queries (not create records) the move order lines eligible to allocate and transact.
So, I don't see why you need to add a new line in transact move order.
You can, however, add a new line in the allocation of the lines, where for instance, you need to have half of the line allocated to one locator, and the other half to another locator
Thanks

How can I add a library of flash movies to my site?

I posted this same question on the Dreamweaver forum and a suggestion was made that I try over here for help, so please excuse the duplicate question.
How can I add a library of flash movies to my site?
Hey there everyone and thanks for reading my question.
I have a library of flash movies (specifically a library of maps) and when the map movies are run in Flash they call each other just fine (i.e. the USA map will load the Georgia map when Georgia is clicked on the USA map, etc etc etc for each state).
HOWEVER, when I insert the USA map in one of my site pages (I'm working on the site using Dreamweaver CS4) the USA map page will load, but when a state is clicked the area on the page for the map goes blank and the state map does not load.
Short of coding a specific path in each of my state maps (in the Flash editor) is there a way to tell Dreamweaver there is a library of maps, look there for the sub-map?
and if I do have to code the path to the map, can I code a relative path rather than a specific URL address for the maps?
I know this is probably one of those simple things, but I'm not seeing it (can you tell I'm new at this??)
Thanks in advance for any help!
Frances

Hey again,
Thanks for the helpful suggestions. Everyone's comments got me to thinking about what the path was in the calls from the maps.
here is what finally worked:
on (release)
loadMovie("../FlashIMapDownloads/georgia.swf", 0);
this script code is in the action script for the "georgia" button of my main map - a US Map. (I hope I'm describing all this correctly).
I'll post this same info in the Dreamweaver forum too.
Thanks again!
Frances

How do I add a note or highlight a word in a pdf file in iBooks?

How do I add a note or highlight a word in a pdf file in iBooks?
iBooks version 3.1 on iPad 4 running iOS 6.1.3.

That functionality in iBooks is limted to ebook files and is not available for standard PDFs. Try Adobe Reader.

How do i highlight like if i am making a sports highlight film and before every play i want to like make the subject shiny so everyone knows who to look at.

QUESTION!!: how do i highlight like if i am making a sports highlight film and before every play i want to like make the subject shiny so everyone knows who to look at.

Tools > Options - General tab = Downloads
Set your preferences there.

How to Add points on graph from a text File ?

Hello and Good Morning to all,
I have a text file with my data and i read them by using the Read From Spreadsheet File VI,i enter the path where my file is saved,read all rows delete the first row because i don't need it and my problem is that in the text folder i have specified date and time which i want to be my X axis in my Graph and Y axis to be the Vout that means i have to use a XY Graph ,below you can see my data:
Date        time              Vout
3-9-2012 7:45:37            2,35
3-9-2012 7:45:39            2,75
3-9-2012 7:45:41            3,15
3-9-2012 7:45:43            3,50
1) Is the text file format compatible with the input of the graph command?
I do not find a LabVIEW function which convert the “date” from the text file (example:3/09/2012 07:45:37) into a compatible format for X axis for the graph.
(Conversion from string format => into a “date and time” format)
Can someone please provide a code solution for this problem?

Hi gstathatos,
                         See all the threads given below:-
                         http://forums.ni.com/t5/LabVIEW/Add-points-on-XY-graph-with-time-step-not-constant/td-p/1507066
                         http://forums.ni.com/t5/LabVIEW/Add-points-on-graph-from-a-text-File-Date-and-time-include-in/td-p/1...
                         http://forums.ni.com/t5/LabVIEW/read-double-waveform-text-file-and-and-plot-graph-in-labview/td-p/10...
Thanks as kudos only

How to add href track in quicktime mov file (win xp )

Hi,
I am trying to add href track in quicktime mov file (win xp )by following the instructions given on
www.apple.com/quicktime/tutorials/hreftracks.html
I want to popup url automatically while playing the mov file.I have added this text file as href track in mov file
content of url.txt file are
A<http://www.yahoo.com>
and follow exactly the same steps given in www.apple.com/quicktime/tutorials/hreftracks.html
But when i run the final mov file with href track it is not popping up the url www.yahoo.com automatically .
Please help me out i have stuck in this situation badly
Thanks in advance
Thanks again
Jawad Haider
Windows XP

Hi,
I am trying to add href track in quicktime mov file (win xp )by following the instructions given on
www.apple.com/quicktime/tutorials/hreftracks.html
I want to popup url automatically while playing the mov file.I have added this text file as href track in mov file
content of url.txt file are
A<http://www.yahoo.com>
and follow exactly the same steps given in www.apple.com/quicktime/tutorials/hreftracks.html
But when i run the final mov file with href track it is not popping up the url www.yahoo.com automatically .
Please help me out i have stuck in this situation badly
Thanks in advance
Thanks again
Jawad Haider
Windows XP

In Pages when I go to FIND how can I change the highlight colour of the found word? At the moment it is a very pale grey and not easily seen.

In Pages when I go to FIND how can I change the highlight colour of the found word? At the moment it is a very pale grey and not easily seen.

Well, it might depend on the nationality of your keyboard, but on my US keyboard, the tilde ("squiggle") is above the TAB key; on a Mac, ⌘-TAB cycles through the active applications and ⌘-tilde cycles through the windows in the front application.
When you do a Find, Pages selects an instance of your search text (the next one after the current selection, I think, but I didn't check that). It doesn't make the document window the front window, though. If you click in the window to bring it to the front, it moves the selection (or insertion point) to wherever you click unless you click on or above the ruler. Try clicking at the top of the document window after you do a find; say somewhere near the document name. Now you should see the highlighted selection (your search text). If you click back on the Find window, the selection will go grey again, unless you hold ⌘ down while clicking.

Sports highlight film

I have been asked to do a sports highlights film for someone. I have a ton of game clips and photos. So I want to transition between clips and pictures and put some information about the plays such as stats. I also want to be able to accent the player that the clip is focusing on. Maybe have a oval around him or something to make the focus be on him. Then I want to add some background music. I have been messing with Premier and After Effects. It seems I could use either one. What is the best tool for this type of project?

What is the best tool for this type of project?
Both! While your setup sounds effects heavy, and you will use AE a lot, you wouldn't wanna build the rough timing in AE when in Premiere with its realtime support it would be more intuitive, especially when syncing to the sound, would you? Also, Premiere can do simple ovals/ vignettes. It has the leave Color and similar effects for highlights. It has a built-in color correction. It even has simple mask shapes. And of course it has a title tool, which isn't all too shabby, either. The point really is to work as efficiently as you can. You would only use AE, if you need something that you can't do in Premiere.
Mylenium

Gain control freezes after a certain point (cannot get highlights to 100) with colorwheel mode

I just purchased Adobe CC, (Switching from FCP 7, did not want to upgrade to FCP X). Really loving SpeedGrade (was an Apple color user)
I am using a standard iMAC keyboard and magic mouse (iMAC 27")
In colorwheel mode: After setting the blacks to 0 with the offset wheel, I try to move the gain wheel to the right, to get my highlights to 100. Even when holding shift, I have to click and drag several times to move the pointer. I cannot move it in one motion. Even then, the pointer will literally stop or "freeze" at about the 3 o'clock position. In order to get my highlights to 100, I have to switch to the Editbox mode and scroll the numbers up manually. I cannont do it with the colorwheel mode.
Very frustrating. Any advice?

Thank you so much for your prompt response. After I posted my question, I looked online and found some users had the exact same issue and found the solution. It is in the way you move the mouse:
When clicking on the indicator for a color wheel, my impulse was to move the mouse in a downward circular motion, to mimic the round path of the wheel. This appears to not work and makes the indicator "freeze" after a certain point.
When clicking on the indicator and then moving the mouse laterally, directly to the left or right on a mouse pad (or desk), it moves the color wheel indicator all the way down to either end. When moving the mouse this way, it seems to work. I hope I’m explaining this clearly.
To answer your question, yes the issue was with the Offset and Gamma wheels as well. But since the particular adjustment for these was not as much, I didn't realize it. But the gain adjustment I was doing was more severe, which is why I thought it was just the gain wheel adjustment.
So it appears it was the way you move the mouse to adjust the color wheel - which should be left and right.
I really am enjoying Speedgrade much more than Color. I was a huge Color fan as well and very upset when Apple discontinued it. I am very happy I found SpeedGrade and look forward to learning it more in depth. My next challenge is to find out how to use the SG color wheel controls to mimic curve adjustments.

How can you watch itunes purchased movies on apple tv. A click on to movies then into purchase thn a click on a movie i want to watch then my apple tv box light starts going on and off plus the screen is blank

How can you watch itunes purchased movies on apple tv. A click on to movies then into purchase thn a click on a movie i want to watch then my apple tv box light starts going on and off plus the screen is blank

JasonFromSK wrote:
With the newest Airport firmware (7.6.1), it seems I should be able to do this.
Really? I need to check that out!
You should certainly be able to add content by reference to itunes from such a disk (even before the update) - so long as itunes knows the location of the file (set Preferences not to copy to local library when adding the media) it will stream it to AppleTV if the disk is available.
I hope you're right, but I'd be surprised if current Extremes can be upgarded to provide a full Home Sharing service - marvellous if they can but I'd be surprised as i've long said we need an Apple media server either based on TC or AE to do this kind of thing.
AC

In making a "highlights" movie, using clips from different imported iMovie events, can I delete the larger iMovie event file from the Events browser and still work w the smaller clips in the Projects browser w/o having the larger files still loaded?

I have sucessfully imported 150 Sony digital 8mm movies (each one hour in length) into iMovie as 150 iMovie events. I have since successfully converted them from their original 13 Gb (.dv) file to an exported smaller 1.3 Gb (.4mv "large file") movie that I am happy with, using the iMovie projects browser. So now I have 150 " .4mv" movies on my internal HD as well as about half of my original raw data " .dv " movies on my internal hard drive.
Due to their large size (over 2 Tb), I do not have all the larger raw data (.dv) files on my 2Tb internal drive, just about half of them. What I want to do now is to create a new project in the Projects browser for each of my kids, and reload, starting with Tape #1, each of these larger files and do a highlights movie for each of my kids, wherein I pick out smaller clips from each 1 hour .dv iMovie event and paste them into the appropriate kid's Highlights project in the Projects browser.
Here's my question: If I load the first 5 large files back onto my internal HD, and paste in various shorter clips into each of my kids' Highlights project, and then if I delete those first 5 large files (they are backed up on 2 other 3Tb external HDs), can I keep doing this (reloading the next 5 large .dv files to work with), and ultimately take each of my kid's Highlights project and export as a .4mv movie EVEN THOUGH the earlier large .dv files are no longer on my internal HD, OR does my iMac need to have all these larger files loaded on my internal HD for me to eventually export each of my kid's Highlights project to a .4mv movie?
I have a 2011 era 27" iMac desktop w 2Tb HD internal and 250 Gb flash drive, and Lion OSX and iMovie 11.

Thanks. I tested it out and you were correct. I loaded 2 .dv movies from my external HD back onto my internal HD, and got them re-imported into iMovie, took a few short clips from each of the 2 iMovie events and pasted them into a new project in the Project Browser. Then I deleted these 2 "source clips" from my internal HD, closed iMovie and then re-opened it and found that iMovie would NOT export the smaller clips for a "highlights" .4mv movie without the "source clips" being available.
I read your link on Quicktime. It talks about mostly trimming, which is what I did with each iMovie event before I took each one as a project to export as a smaller .4mv file. But if I use Quicktime (do I need QT Pro or basic), what advantage is it to me to use QT over iMovie (I must admit I am a novice at iMovie and have never used QT or QT Pro as a tool)? Will it then convert any edits I make to a .m4v movie or do I need iMovie to do that?
Does QT allow trimming multiple segments out of a movie during one edit session, or can you only do 1 at a time? By that I mean that, for example, when I use Sonys Picture Motion Browser for my .mts movies, you can only set one Start and one End point for each edit/trim you do: it does not allow you to set multiple Start Stop points like iMovie allows in its Event or Project browser. You can only do one "trim" at a time, save it and then reopen to do another trim. not very useful.

How do i copy a dvd movie to my hard drive

Can anyone please tell me how to copy a home made movie from DVD to my hard drive? I'm trying to add it to Apple tv, and it's in a TS format and I can do nothing with it. I mean, when I made it, I made a beginning, which my titles are sitting on. And I want to keep the part that is the beginning, and then be able to choose which title I want to see, but I can't get anything to copy the beginning, only copies the three videos. It's very important to have this beginning, or whatever it's called while I choose a title. I was told to copy the DVD to my hard drive, but it won't copy. Now what?
Thanks,
Sandy
Mac Book Pro
Mountain Lion

Ah!

How do I play all my Movies from the iTunes' Library?

How do I play all the Movies from within my LIBRARY without having to click PLAY everytime on each individual movie? All my movies in the Library have the check marks on them already.
When I play my "Music" LIBRARY, as soon as a song is over the next one starts up. Fine. Great! But, the same is not happening from within my "Movies" LIBRARY.
This play-all-Movies type of action works fine from within each of my playlists. Once selected a movie to play from any playlist, other movies will keep on playing, one after another, until told to stop. But, I also would like to play all movies from my library.
It would seem redundant to copy my entire library into a single playlist just to have this function available. Besides, every time I would add a new movie to the library, I would also have to remember to add it to said playlist.
Could anyone, please, tell me if it is possible to play all movies from within the LIBRARY? (iTunes v.8.01).

Thanks for your prompt reply, Meg. I've applied exactly your "smart playlist" directions (always wondered what that "smart playlist" was for while it worked wonders! Great going.
"I asked for a fish and you taught me how to fish"! Thanks again!

How add pointer to sports highlight movie

Similar Messages

Maybe you are looking for