How adjust relative position for overlay plots?

I ploted 2 curves in one chart, one in red, and one in blule. My question is very simple, is there a built-in tool or property node that allow me to change the relative position of the two over-laid plots to determine which stays on top, which stays on bottom? In this case the red is placed on top, blue on bottom. But I'd like to change relative position in real time sometimes, any idea?
Arnold
Attachments:
plot overlay example.jpg ‏67 KB

It is the order of the plots that you send to the graph.
See http://forums.ni.com/t5/LabVIEW/Change-waveform-graph-plot-order/m-p/691681

Similar Messages

How to change position for items in shopping cart

Hello,
I am creating shopping cart using flat file. But i am not able to change the position for items i.e. both items contain position as 0000000001.
Following are the item details of shopping cart which is created through portal. (from tcode BBP_PD)
Items:
Pos Type Quantity Unit Ordered_Prod Description Gross price
0000000001 1 EA keyboard 100,00
0000000002 1 EA CPU 1.000,00
Following are the item details of shopping cart which is created using flat file & BAPI BBP_PD_SC_CREATE.(from tcode BBP_PD)
Items:
Pos Type Quantity Unit Ordered_Prod Description Gross price
0000000001 1 EA MONITOR 1,00
0000000001 1 EA MONITOR 1,00
Position is not getting changed for item 2 & only first record is getting uploaded 2 times. My code is creating Shopping cart number .
Please tell me how to change position of each item.
Thanks & regards,
Edited by: Ketkee Bhale on Sep 14, 2011 3:58 PM

Moderator message - Cross post locked
Rob

How do I copy clipping masks including relative positions for multiple images?

I have a number of microscope images of the same subject that were taken under three different conditions. I'd like to use clipping masks to crop the images in the same way (the same size but also the same positions relative to the corners/sides of the images. In case that was incoherent, I made an image to try to explain what I'm trying to achieve (the same portion of each image for each set):

condor,
You may, with one image in the set masked:
1) Direct Select the Clipping Path and Ctrl/Cmd+C+F+X+F, then move it by the distance between the centres of the images; you may do that for the whole set by repetition;
2) Select the/each image and path and Object>Clipping Mask>Make.
Alternatively, in 1), you may select the Clipping Path (Mask) in the Layers palette, within the Group.
The Ctrl/Cmd+C+F+X+F is to get the path out of the Group.

How to SET positions for Boxes

Hi
I have to put some Box on my Applet, at different positions (coordinates).
Is it possible to set the positions, without having as many Transform3d as Box?
Thanks ...
Bertrand

maybe i'm wrong
but you need a transform3d for every boxes
if you want them to be in different location
sorry
cyril

Font Smoothing + Relative Positioning = Problem

Hello,
I ran across a strange inconsistency while designing a relative position based layout.
My page has two divs, both relative positioned for height. They do not overlap. The page renders excellent in Firefox 3.5, and not bad in Chrome (though a little different from FF). Safari however pushes my second div down too far.
I found that by disabling font smoothing (or rather switching it to anything besides "windows standard") fixes this issue. However there isn't even any actual text on the site, at all. There's 4 images, a couple input fields and a submit button.
I can post some of the code, or example screenshots of what's happening. I've tried a couple css hacks to target safari (without targeting chrome) with no success. Anybody have any advice?
Thanks,
Tom

Please disreard...
I got it figured out. I just moved the paragraph tag outside
of the table
and changed the position from bottom:50% to top:50%
once the <p> was moved out of the table, it's normal
position would be at
the very top. So, I moved it 50% down from the top using
relative
positioning. Being inside the table caused it to not work in
Gecko? I
wonder why?
"-D-" <[email protected]> wrote in message
news:f7fr0d$jb8$[email protected]..
> I'm using relative positioning for an <p> tag that
is positioned normally
> at the bottom of a table cell "valign="bottom".
>
> I set the paragraph tag to <p
>
style="position:relative;bottom:50%;text-align:center;line-height:1.6em;">
>
> so, the text will position itself 50% from the bottom
positioning. This
> works fine in IE, but Mozilla and Netscape still
position the text at the
> bottom of the table cell.
>
> Here is the test page to see what is happening:
>
http://www.dwayneepps.com/contact.aspx
>
> fill out the form and click send to see the problem.
>
> Thanks for any help.
>

Just need to load Positions for legacy MM deposits

Just need some guidance for initializing only positions in SAP-TR.
Only initializing the balance position, none of the previous interests will be brought over.
Thanks,
Rahul

Hi Rahul,
I would say there are at least a few methods how to load Positions for legacy OTC instruments, depending on their complexity:
if complexity of your open deals - the ones which starts at some point before the migration date and matures after - is rather low, you can input them as original deals with all parameters - including interest flows - in this way you secure that you have no deviations between your SAP entries and previous system - either you enter them manually or use the existing BAPIs to import the existing OTC transactions automatically. Then, you have to transfer all flows prior to the migration date to the status 'Posted', without actually generating documents in the general ledger - to do this, use a transaction 'TBB1_LC - Flag Flows as Posted';
if your opens deals are rather complex - lots of nominal changes, like repayments, etc. - it might make sense to enter a deal as from chosen period to generate e.g. expected interest flow - so you define only balance position from certain date. You would still need to use the transaction TBB1_LC to to transfer all flows prior to the migration date to the status 'Posted'.
hope this will help you.
Kind regards,
Renatas

How to adjust the position of an image in a full screen slideshow

Hi I'am using a full screen slideshow composition on my page and muse is not letting me adjust the position of the image to the top, middle or bottom of the frame under the fill option when the image is selected in the slideshow.
I also find it very buggy when previewing the page in a browser, some time it re-sizes the image only larger but never scales down proportionately, only on rare occasions. Why does this happen?
Can someone please help ASAP I need to get this site done by tomorrow.
Thanks,
Gary

Welcome to Apple Support Communities.
The effect you're looking for is 'Scale'
In Keynote '09, 5.1.1 select the graphic.
Click Inspector in the tool bar, Build Inspector (3rd icon from the left), (Build In and Build Out are both set to None for this step) Effect, Action, and then Scale.
It rescales ('zooms') the selected item (image) up or down from 0% to 200%
Clicking on the More Options button at the bottom opens a drawer to the left, and gives you more control over how the build occurs, whether they happen automatically, timed, or when you click, and re-order build steps.
At 200%, double the original size, resolution could be a problem. There is a workaround, because it also scales smaller, down to 0%. So I would scale the graphic down 'small' as the first step to fit at the bottom, (even hide it behind a background-colored box) as you scale it down, and then at the end, scale up to full size to fill the screen at 'normal' resolution.
In the attached example, I use a 'scale' up to go from 100% to 130% on a map, and use arrows and a flashing line to point out the road where a specific business is located with 12 steps. Some elements in my slides have been intentionally obscured. For simplicity, I've eliminated showing any steps but the initial title and the scale.

How to adjust start up for iTunes Helper.exe

XP Home, SP2, iTunes 7.1.0.59,
in msconfig there are two start up iTunes releated items:
iTuneshelper.exe,
qttask.exe
I wish to tweak my system and remove these from Starting up, thus, msconfig startup, and access them only when I start iTunes or something related to Quick Time.
Please advise in explicit detail how to adjust the settings for both iTunes and Quick Time so as to have them only start when I turn them on manually.
Thank you in advance,
Robert
HP Pavilion ZE 4230 Windows XP 1.83Ghz, 512 RAM, 40GB HDD, 250GB external HDD

qttask is just the system tray icon for Quicktime. You can stop this from the advanced tab of Qicktime preferences.
There isn't a simple adjustment for iTunesHelper.exe. It doesn't use significant resources unless something is wrong and you should leave it alone.
There is a short piece on what the background processes do here:
http://docs.info.apple.com/article.html?artnum=302488
If you must control iTunesHelper startup, maybe something like Winpatrol would help help.
http://www.winpatrol.com/

How do you programmatically switch between a stack plot and an overlay plot with a waveform control?

One method i realize is to have two waveform controls, one visible and one not visible. The real issue here is, how to dynamically control the number of plots in a stacked plot. My case,
i will have between 2 and 8 channels. I have found that in the properties if i set the number of plots - Legend--Plots shown . I can control the number of stack plots, however, i must toggle from overlay to stack plots in design mode for the correct number of stack plots to be shown. Does anyone know a way around this problem or know of the property that has alluded me?

Hi,
You cant select between Stack plot and Overlay programmatically. Well not in LaBVIEW 5.1.1.
You could have two Charts, one set up for Overlay and the other setup for Stacked. Then hide the one you are not immediately using.
Ray.
Regards
Ray Farmer

How to let the user define the colors for each plots in the graph (I use LabVIEW 7)?

How to let the user define the colors for each plots in the graph (I
use LabVIEW 7)?

Hi,
Take a look at this example, it uses property nodes to select tha
active plot and then changes the color of that plot.
If you want to make the number of plots dynamic you could use a for
loop and an array of color boxes.
I hope this helps.
Regards,
Juan Carlos
N.I.
Attachments:
Changing_plot_color.vi ‏38 KB

How to relate dispute case for a AR document

Hi Gurus,
I have a requirement to change the reason code change date of dispute case(DIspute management) for the related AR document.
Basically i am posting a AR document through BAPI. Now i wanted to take the last dunned date(MADAT) and find the related dispute case after that change the reason code change date using last dunned date.
so my question how to relate relevent dispute case for the AR document?
Thanks advance.
Regards,
Radhakrishna.

Hi.............
Better and simplest way you can get it through a simple qury report. Create a query by joining two tables ODLN and OINV. OINV's docdate means the closing date of delivery challan.
Regards,

How do I adjust display resolution for Mac Mini?

How do I adjust display resolution for Mac Mini? Text does not look crisp. Using Samsung 27 inch monitor with HDMI input

Apple menu -> System Preferences -> Displays. Depending on your version of Mac OS X, it may be set for "Best for Display" in which case it should already be set at the optimum for your monitor, or it may display resolution options in which case you should set it for the native resolution of your display.
Regards.

How do you change/adjust border width for all the cells in a table created in Pages?

How do you change/adjust border width for all the cells in a table created in Pages?
Note- I am trying to figure out how to create and format tables in the latest version of the Pages app on an iPad air (iOS 8.1.1.1) . Creating tables, adding or removing borders for individual/all cells in a table seems straight forward. However the default border style seems to be a heavy black line. How do I change this?
I found the option add or remove borders for all/ individual cells in a table, however I can't find any option within style/format dialogue screens for changing colour or line thickness for table cells. Likewise I can't find any clear instructions on how to do this in apple help pages or support website
Btw- I'm assuming it is possible to customize/adjust the colour & thickness of selected lines in a table created in this app (it's fairly easy to do this word processing apps like MS Word) please let me know if this is not actually possible in Pages

They know perfectly well what they took out of Pages '09.
Well over 90 features.
Do you think you posting feedback is going to remind them of what they did?
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
Pages '09 should still be in your Applications/iWork folder.
Archive/trash Pages 5 and rate/review it in the App Store, then get back to work.
Peter

How to use position hierarchy for approval in custom workflow ?

Dear All,
I have created a custom workflow which fires when ever a new supplier site is created.
Now I want to add approval hierarchy in this flow. For that I want to use Position Hierarchy.
I have not find useful resources for doing that. Can you please help me?
Regards,
Rubayat

Hi;
Please review:
How to Create a New Position Hierarchy [ID 437489.1]
Adding Positions to a Hierarchy from Another Business Group [ID 356127.1]
How To Determine Position Controlled Organizations In The Hierarchy? [ID 549628.1]
How Does One Create and/or Update Position and Position Hierarchy in HR Using an API? [ID 736443.1]
Using AME, How To Create Approval Routing To a Certain Position In HR Position Hierarchy [ID 1501433.1]
Regard
Helios

How do I adjust incoming sound for Skype and magic jack

How do I adjust incoming sound for Skype and magic jack. Out going sound is great.

Hi, domiboy.
Thank you for visiting Apple Support Communities.
Here is some information that you may find helpful.
Adjust audio
Cheers,
Jason H.

How adjust relative position for overlay plots?

Similar Messages

Maybe you are looking for