How am I supposed to create an SATA driver floppy disk?

I mean the JMicron drivers. I have downloaded the zip file and unzipped it onto my HDD. Now I have several directories. Which must I copy onto the floppy disk?

Oof, quite a few:
the folder tree looks like this:
C:\
Application
Driver\AMD64
Driver\x32
Floppy32
Floppy64
In all the folders there are some driver files. Obviously I dont wanna use the AMD64 files. What about the others?

Similar Messages

I don't have credit card so how am i suppose to create an apple id to download apps?

i don't have credit card so how am i suppose to create an apple id to download apps?

To use an Existing Apple ID...
Purchase and Redeem an iTunes Gift Card.
How to Redeem a Code > http://support.apple.com/kb/ht1574
To Create a NEW Apple ID...
See > Create an iTunes App Store account without a credit card
Note: Do the above on a Computer

How can i mount 2nd and 3rd SATA drives during install

I have 3 SATA drives in my desktop.
all ext3.
I installed, and set up sda as /, but then it asks if i want anything else mounted. I want to put in sdb and sdc, but I select ext3, and it says it will wipe it.
I installed Arch before, but i can't remember what i did. Those drives are full of stuff, so i don't want to risk formatting it just to mount it.
ideas?
thanks

SyXbiT wrote:
Would yo ulike to create a filesystem on /dev/sdb1?
This will overwrite existing data
are you saying it will keep my data intact?
If I'm understanding you correctly, you want to mount X partition with a pre-existing filesystem. It has pre-existing data, and you want to keep that data intact.
If this is the case, answer "no" when it asks "Would you like to create a filesystem on /dev/sdb1?"

How do you change "Owners Enabled" for a drive in disk utility?

Hi all,
I just got a new Mac Pro and added a couple of internal drives to it. After formatting them in disk utility I noticed that "Owners Enabled" is set to "No" for them. This concerns me. How do I set it to "Yes"?
These are the things I tried:
- I verified that "Ignore ownership on this volume" is unchecked in finder. I actually toggled it on and then off.
- I used "vsdbutil" in terminal to enable permissions for the volume and verified, using it, that they are indeed enabled.
- I unmounted and remounted the drives in disk utility.
- I restarted my machine.
Basically nothing I've done has been effective at turning on "Owners Enabled" for the drives. How do I do that? And what exactly does it mean if it's set to "No".
Thanks for any help, I wish this was all clearer.

FYI, 755 only allows write by owner, group is read and execute only. 775 would allow group write as well. 777 is read, write, execute for everybody.
Anyway, a coworker pointed me towards diskutil which seems to be the current best way to muck with disk settings.
http://developer.apple.com/library/mac/#documentation/Darwin/Reference/ManPages/ man8/diskutil.8.html
It specifically has an "enableOwnership" command which would be run something like this:
diskutil enableOwnership /Volumes/DriveName
or
diskutil enableOwnership /dev/disk2
You can do all kinds of other stuff too with diskutil. It looks like an excellent way to quickly screw up your drive.
Thanks again for your help, I have quite a number of things to try now.

How to properly get rid of the SATA drives in "Safely Remove Hw"(systray Icon)

If you have the nvidia ide and or raid enabled (using the nv/sw ide driver) you have the
drives listed under add/remove hw icon in systray .
To have it gone from now and forever use this dword in registry .
Code: [Select]
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\nvata]
"DisableRemovable"=dword:00000001
Open notepad and copy/paste in this , then save it as a reg file , e.g : dis_removable.reg
Double click it to merge into registry.
Do do it manually in registry :
Locate HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\nvata
Create a dword value named "DisableRemovable" without the quotes and set the value to 1
If you dont have the nvata key (e.g nforce 3 drivers) do the same in :
Locate HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\nvatabus
Create a dword value named "DisableRemovable" without the quotes and set the value to 1
Before :
Samsungs are in Raid-0 (nvraid/nvata).
The other two is single disks (nvata).
After:
All gone , just the USB left as it should be
If you dont have any fw(1394) or usb removables , the entire "Safely Remove HW" is also gone from systray
Reg files zip:
nvata-removable.zip

Quote from: gildan2020 on 19-August-06, 15:05:30
I have an external SATA hard disk. edit: using firewire as the connection port
If I use this registry, will I still be able to safely remove my external hard disk?
All sata disks are connected to the same controller ports on the nvidia motherboard ,
the controller doesn't know if it's an internal disk or one externally connected through a e-sata bracket .
So as said earlier (in post #4) : dont use the reg key if you plan add/remove sata disks in general (internal disks or external disks) .
But in your case if the sata hd box is firewire connected it's an external firewire disk from the OS point of view,
so the reg key doesnt affect this drives ability to stop via "safely remove hw" and it will still be there .
It would only affect you if you had sata all the way .

How to install Mac OSX on New Hard Drive (No Disk)

I have a new Hard Drive that I just received and I'm looking to install it on my Early 2009 17 inch Macbook Pro. The problem is I dont have the original disk that came with my macbook. I do have a 2TB external HD so is there anyway I can back up Maverick on there and install it on the new Hard Drive without having the original Disk?

If your machine is running Mavericks with the old drive, just connect the new one in an external enclosure. Boot to the Recovery partition by holding the Command and R keys at startup. Run Disk Utility to prep the new drive, exit Disk Utility and install Mavericks.
You could also do the external enclosure and use Carbon Copy Cloner to copy your existing drive to the new one.
http://www.amazon.com/Sabrent-2-5-Inch-Aluminum-Enclosure-EC-TB4P/dp/B005EIGUD4/ ref=sr_1_3?ie=UTF8&qid=1395317179&sr=8-3&keywords=2.5+enclosure

Can I create a raid drive with disk utility

I recently bought a 2TB seat gate external drive.
I want to use this drive with time machieve as well as set it up as a raid drive to strode photos.
Is this possible to do with disk utility?

Hello
you can not make any kind on RAID type with only one hard drive you need at least tow drive to perform a RAID volume
then , hard drive utility can be use to perform software raid ( Level 0 an Level 1 only )
for more info about RAID technologie http://en.wikipedia.org/wiki/RAID
Pierre

Top 2 workable way to Create Windows 7 Password Reset Disk in any condition

This article describes how to create and use a Windows 7 password reset disk for a computer before and after you forgot the password. You can use Windows 7 password reset CD to gain access to your computer.
Scenario 1: I dont forget the password yet.
Windows 7 has its own backup feature, and you can proactively create a Windows 7 password reset disk before you forget it. With it, you can easily reset your Windows 7 password and get right into your PC.
Follow the easy steps below to create a password reset disk to your own Windows 7 account. Heres how:
Note that this procedure requires one blank, formatted floppy disk.
1. Click on "Start"->"Control"->"User Accounts and Family Safety"->"User Accounts".
2. In the task pane, click "Create a password reset disk". The "Forgotten Password Wizard" appears.
3. Click "Next", and then choose the portable media drive.
4. Click "Next", and then enter your current password in the next box and click "Next".
5. Windows 7 begin to create the password reset disk on your chosen media. When the progress bar reaches 100% complete, click "Next" and then click "Finish".
6. Now you can remove your device and store the disk in a safe place. Once you forget the password in the future, you can take it out.
Follow the easy steps below to use a password reset disk to recover Windows 7 password. Heres how:
1. The created password disk can now be used during log-ins to reset the password. A reset password link appears on the account screen after an unsuccessful attempt to log in.
2. Click on "Rest Password", and the "Password Reset Wizard" dialog opens. Here you need to insert the reset disk to the PC.
3. Follow the wizard to type a new password twice to make sure you type the correct password. You are suggested to create a new password hint, so that you can remember the password with it if you forget it.
4. Windows switches to the Windows log-in screen again where you can use the new password to log in.
Scenario 2: I have already forgotten the password.
If you have already forgotten your Windows 7 password but dont have a password reset disk at hand, you can choose another way to reset the password.
Here is how to create Windows 7 password reset CD/USB:
1. This procedure needs a CD or USB flash drive. Insert your media device into another computer which can access to system as administrator.
2. Launch Windows 7 password reset disk software. On the main interface, choose "reset Windows local account password".
3. Choose your target device, and click "Burn" to start Windows 7 password reset disk creation.
Here is how to reset Windows 7 password:
1. With this Windows 7 Password Reset USB software, boot the computer that you want to reset the password for.
2. Under Windows PE, you enter the main interface of this software. Choose your Windows system, and select the user account you need to reset password.
3. Click "Reset", and then "Yes" & "OK" sequentially to finish removing Windows 7 password.
Quite easy, isn't it? After fully control system password reset, you will never worry about your bad memory
+Message was edited: link has been removed+

well, as to reset Windows 7 password on toshiba laptop, it is a good solution to take a Windows password recovery tool, like Windows Password Unlocker
+Message was edited: link has been removed+

Do I need to install drivers for a sata drive?

I have K7N2 Delta2-LSR and it came with a sata raid driver floppy disk. Mine is just a single drive on which I want to install Windows. I read some where that it is not needed during windows installation unless I want to setup a raid system. Is this correct? My sata drive shows up under the external device icon, the small green arrow icon on the system tray. Is it suppose to be like that or is it because I did not install the sata drivers during windows installation? Any advice please?

What brand and model of SATA drive are you using? I had two other posts on this issue because one model of Maxtor drive that I tried works fine and another model does not work at all.
My configuration is like yours, I currently only have one SATA hard drive connected to this machine. There are multiple PATA drives on the machine and they all work fine together.
Seeing your post made me do more research on my motherboard. Until now, I thought the SATA controller on this board was not capable of RAID. I know know it is, thank you silverferro and Stu

Not detecting sata drive on ms7021 mobo

I wonder if someone can help. just bought sata 80gb diamond max hdd.
set it up with maxblast.when i start os disk it says no hdd detected.
could some one take me thru setup or point me in the right direction
I have never setup sata before.I am doing just one drive.
any help will be welcome, Thanks

TireSmoke sez:
>>>Sata drives do not show in the Bios like IDE does. As Sata is not a native drive type like IDE you have to install it's drivers when you install Windows.<<<
I've been mystified by the comments regarding BIOS detection, or lack thereof, of SATA drives.... maybe I'm missing something here, perhaps it's just due to the board I have not exhibiting these problems. The first time I booted up my RS482M4 the Maxtor DiamondMax 300g SATA drive showed in the POST, entering the BIOS it was identified correctly.
>>> That means when you pop in that Windows CD you also need to pop in the driver Floppy disk that came with your MB. Then start the Install by booting from the CD. At the first blue install screen you need to tap the F6 key to load extra drivers. Windows will then prompt you in a few minutes when it is ready for the extra drivers with a window for chosing that driver from the disk. You will be OK after that as your Sata will show up in the list of Drives to Install Windows on. <<<
Wouldn't these be *Windows* drivers... which would do *what* for the BIOS detecting the drive? The floppy that came with my mobo was labeled "RAID" drivers. Since I wasn't planning on running RAID I didn't install 'em. Everything appears to be working fine as far as I can tell. I *did* get an education on the XP 137gb limitation though <g> SP2 took care of that problem and an additional partition and logical drive allowed access to the entire drive. It always showed up in the BIOS correctly though.
One of the things I was wondering about in the BIOS was the ability to select either enabling RAID, "enable as an IDE device" or enable as "Storage". Enable as IDE was the default.... was the diff if one was to select "storage"?
TL
MSI 7191 / RS482M4-ILD v1.1 - AMI BIOS v1.1
Athlon 64 3200+ Venice
2x512 Patriot dual channel
300g DiamondMax SATA

How am I supposed to use my created iCloud contact group on my iPhone?

I followed the instructions & 'help notes' on creating a contact group by logging into my iCloud account. Now on my iPhone I can see the group when I go to Contacts & click on the upper left hand "Groups" button, but that screen only lists which list of contacts I've got synced with my iCloud. Unless I'm missing something, I do not see how I'm supposed to actually use/implement my new "group." I was hoping to be able to create a new text & type in the name of my group & send, or have an option to choose from a group list to use as my recipients, but instead nothing.
Am I completely missing the point of grouping contacts on the iPhone???

About all you can do is when addressing the email, tap the "+", navigate to your groups, uncheck all groups but the group you want to send the email to and tap Done, then tap each member one at a time to add them to the list of recipients.
Otherwise you can use an app that will allow you to select an entire group at onece (such as Speed Names).

Hi, I want to purchase the complete creative cloud at S$60 , however, in my account, at the payment page, it's appear RM currency and the selection of country does not include singapore. How am I suppose to purchase?

Hi, I want to purchase the complete creative cloud at S$60 , however, in my account, at the payment page, it's appear RM currency and the selection of country does not include singapore. How am I suppose to purchase?

Hi there,
The country selected while creating the Adobe account was selected as Malaysia, so you get to see the price in RM.
^Ani

How are you supposed to play a photo cd on a macbook pro?

how are you supposed to play a photo cd on a macbook pro? when i put it in my drive, it says something like disk type not supported when i open up the dvd player. please tell me if theres some kind of software i have to download..please and thank you

when you insert the disk it should be in the side bar of finder. double clickt he disk and you should have some sort of file in it. I'm not sure what softwware was used to create the slideshow but if it's a movie you'll have to figure out what type of media it is. I think VLC media player will be your best bet to play this CD/dvd though.

How can i no which SATA driver do I need for Satellite L300-03C

How can i no which SATA driver do I need for Satellite L300-03C so i can do nlite

Hi
Your notebook seems to be a Satellite L300-03C PSLB8C-03C01X.
As already suggested in your first thread visit the Toshiba Canada page and choose this notebook model on the driver page.
http://209.167.114.38/support/Download/ln_bymodel.asp
Then download the Intel Matrix Storage Manager (SATA) - Floppy drive image. Its for Vista but the files in this package should work with Win XP too.
Include these files using nLite in order to create new Win XP disk containing the SATA drivers.
Finally use this disk for booting.

How are you supposed to upload new music to your iPhone in iOS 5?

I have some folders in iTunes that I had setup to synchronise with the iPhone on iOS<5.
I have some other folders that synced with my iPad.
I don't understand how I'm supposed to change the music on my iPhone now when we sync with the cloud? how do I tell iTunes to "sync this with the iPhone, and this with the iPad."?
I have looked for manuals about his on Apples support site, but couldn't find any.
Please help me, so I understand how it's supposed to work!

Then be more specific.
Creat a list with your top rated trance music, or put a keyword in certain songs and make smart playlists using keywords or simply limit the size of the smart playlist.
You can make =these playlist in just about any manner you wish. They are very flexible.

How am I supposed to create an SATA driver floppy disk?

Similar Messages

Maybe you are looking for