How and where I can build the logic to calculate between cal days?

Hi
I have the cube having data like below. When I run the report based on calendar day as input, I would like to get output data how many Line Items based on my selection (status, Trans status) from between calendar day to calendar day+150 days.
0Calday     Sold-to-Party           Status                 Trans No     Trans Status      Line Items
03.10.2008     2000028074     50     216270          28                       1
05.11.2008     2000024917     40     216281          15                       1
06.10.2008     2000006277     33     216292          28                       1
15.12.2008     2000019927     33     216303          10                       1
If I provided calendar day as input at query how and where I can build the logic u201Cbetween calendar days to calendar day+150 daysu201D?
For example, If I run a report as caleder input 03.10.2008 with selections status = 40,33, Trans statu =15,10, with above data, I can get the output below.
05.11.2008     2000024917     40     216281          15                       1
15.12.2008     2000019927     33     216303          10                       1
Please help me to build the above logic?
Thanks,
Mannev

Hello,
There are some informtion in SDN that can be useful regarding customer exit for variables in BEX, for example:
need clarification on BEX variable usage in customer exit.
you can also try to use the variable offset:
variable offset in Bex
Best Regards,
Ricardo

Similar Messages

Can you use Easynews to download movies etc to IMac and how and where do you save the files?

Can you useEasynews to download movies etc to IMac and how and where do you save the files?

From your Apple menu at the left end of the menubar, select "About this Mac." You get a window similar to this:
1) The Mac OS version is just under the big "MAC OS X" line. Post what that says.
2) We can start to figure out what iMac you have if you post what that the "Processor" line says.
We need to find out because Apple's poor labling choices for this forum, intended for iMacs made before 2006, causes people with newer and much more capable Macs to post here by mistake.
Without some info from you, it's much like your calling an auto mechanic and asking if you can use a certain part without telling him the make, model, or year of your car. Quess what his first question will be? Works the same here.

How and where do I access the most recent backup of my iTouch's calendar PRIOR to my auto-sync?

How and where do I access the most recent backup of my iTouch's calendar -- prior to the recent auto-sync which lost 5 yrs. of info. on my calendar? I want to retrieve it.

All you can do is restore from backup. To do that see the restore topic of:
iOS: How to back up
Also, turn off autosyncing so that when you reconnect the iPod to yuor computer the old backup does not get overwritten . To turn off go iTunes>Preferences>Devices and check the box that says "Prevent iPods...".
iTunes only retains the most recent backup and updates it with the changes.

HT1338 Just got an Apple and totally new to this system please could someone tell me how and where I can connect my HP Photosmart 3310 for wifi? Thanks, Mike

Just got an Apple and totally new to this system please could someone tell me how and where I can connect my HP Photosmart 3310 for wifi? Thanks, Mike

Welcome to Apple Communities
Start the printer, go to System Preferences > Print and Scan, press the + button and select the printer. Your printer and Mac must be connected to the same Wi-Fi

HT1937 how and where do i put the sim card

how and where do i put the sim card

http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
Page 12.

Why does my incredi email want to open a email in webpage ? i don't like this and how and where do i change the settings for this

when i open my incredi mail to get emails it wants to down load my emails as a webpge it started 3 weeks ago how and where why is firefox doing this and how do i chenge setting to open emails in incredi mail and not as a darn webpage

You cannot go back.

I posted a question. How and where do I find the answers.

Where do I find the possible answers to my question.

You can use your profile (link at the top of each page) to get a link to your questions: https://support.mozilla.org/user/1092003

HT5312 how and where do i find the answers to my security questions????

ok so where and how do i change the answers to my security questions??? please make it easy cause tlooking on this iste can be frustrating

The page that you posted from tells you how to reset them i.e. if you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then steps 1 to 5 on that page should let you reset them : go to https://appleid.apple.com/ and click 'Manage your Apple ID' on the right-hand side of that page and log into your account, then click on 'Password and Security' on the left-hand side of that page and on the right-hand side you should see an option to send security question reset info to your rescue email address.
If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down the page that you posted from to add a rescue email address for potential future use

I have 10.5.8, how and where do I buy the disc for snow leopard?

I have a Macbook that I bought a few years ago, and I have the os x 10.5.8. I want to upgrade to the snow leopard and cant find where to buy the disc or downlaod. I want to update so I can get icloud to use it with my new iphone. Any help is greatly appreciated. Thank you.

OS X 10.6 Snow Leopard isn't available for download. You need to buy it from the Apple online store (in the US 800-MY-APPLE). It will be on the legacy product list. Once you install it, you can use Software Update to bring it up to the 10.6.8 release.

Once again Hamchi Red problem please tell what to do and where I can find the information to do it.

Summary report
------------------------Test name: Peer Result: [RED] -> Problems found
Details:Tunnel:
VPN domain's tap device is down
Local results:
Adapter configuration:
Cannot get adapter config
Traffic test: Cannot complete test
Peer results: [167-807-785]
Adapter configuration: OK
Traffic test: Inbound traffic blocked, check firewall settings

I have the same problem. :( Summary report
------------------------Test name: Peer Result: [RED] -> Problems found
Details:Tunnel:
VPN domain's tap device is down
Local results:
Adapter configuration:
Cannot get adapter config
Traffic test: Cannot complete test
Peer results: [182-047-244]
Adapter configuration: OK
Traffic test: OK---------------------------------------------

Where we can link the vendor & Customer open and cleared iteams.

Dear Experts,
Vendor & Customer open line iteam and clear line iteams tables is BSIK, BSID, BSIAK,BSAD, But where we can link the open iteam and clear iteam, what is the link table of open iteam and cleared iteam. And where we can link the vendor & Customer open and cleared iteams.
For example vendor & Customer linked table is KLPA.
Same above the G/L open line iteam and clear line iteams tables is BSIS, BSAS,where we can link the open iteam and clear iteam, what is the link table of open iteam and cleared iteam.
Thanks in Advance,.
Srinu.M.

Sorry to say you but it is mandatory.
Everybody is trying to help others and solve their problem. When you say i am not asking for that and looking for this, it looks a bit arrogant.
Tables are
Customer
BSID (open items) and BSAD (cleared items)
Vendor - similarly
BSAK and BSIK
Totals
BSEG, BKPF
Let us know if you still need any help
Edited by: nkonnipati on Jan 28, 2012 5:51 AM

How to build the Logical cube and physical cube

Hi All,
I have to build the logical cube and physical cube ,i dont have idea about this ,that means i think for that we have to do the partition for the cube
may i correct , correct me if i wrong ,plz help me on this
Thanks

Hi,
1. Firsty, logical model and physical model are the terms ,which we generally use in the context of database modelling excercise.
2. Coming to essbase, I am not sure ,what exactly you are trying to co relate . but as you termed 'partitions'. There is one of the types in partitioning called 'Transparent Partition'. Where, you have one cube ( which has data in it) and you can have one mroe cube ( which actually has no data in it). But it can be connected to the former cube with the help of transparent partition. This way, you have 2 cubes , but only one cube has data in it.
Sandeep Reddy Enti
HCC
http://hyperionconsultancy.com/

TS3376 How do I find the menue where I can select the list of previous phones I have had and my new one ? at the moment it is still set to an old one so everytime I try to set it up it tells me it it's the wrong one - gggrrrrr help please

How do I find the menue where I can select the list of previous phones I have had and my new one ? at the moment it is still set to an old one so everytime I try to set it up it tells me it it's the wrong one - gggrrrrr help please

iPods (except for iPod touch) are not linked to any iTunes "account." They are associated with your iTunes library. The account in iTunes is your Apple ID, and that is used to buy and download content from the iTunes Store. It is not required to use an iPod.
The 1st (and 2nd) gen shuffle can only be used with one iTunes library at a time. When you connect it, iTunes should prompt you to start using it with your iTunes library, and warn that the shuffle's existing content will be erased. Have iTunes erase the shuffle, and it will be associated with your iTunes library going forward. You can then add content to your shuffle.
The need for the previous owner's Apple ID and password should only come up if you are trying to transfer existing content from the shuffle to your iTunes library, AND the previous owner had content purchased from the iTunes Store. Just cancel out of that step, if iTunes asks.

I want to create a "Play All" chapter marker that will play the video from start to finish in addition to the standard chapters I have-I guess I can auto start the DVD but would prefer a button-how and where would I put this "play all" marker??

I want to create a "Play All" chapter marker that will play the video from start to finish in addition to the standard chapters I have…I guess I can auto start the DVD but would prefer a button…how and where would I put this "play all" marker?? Thanks..

The start chapter button is a play the whole movie button regardless of how many other markers you have.
Once a DVD starts playing it continues to the end.
Chapters marker simply gives the viewer a place to start playback whether it be the start, middle or near the end.
Al

Pro Tool Studio LE 7 upgrade... anyone knows where I can buy the upgrade version for this? and how much does it cost?

I have a Mac Pro 2006 running on leopard and I need to upgrade my Pro Tool Studio LE 7 to 8 so it can work on Leopard.. anyone knows where I can buy the upgrade version for this? and how much does it cost?

Upgrade to Pro Tools Studio LE 8: - http://shop.avid.com/store/product.do?product=288865113879120
But it would be worth searching through the Updates to see if there is an update for Leopard, which it looks like there is: - http://avid.custkb.com/avid/app/selfservice/search.jsp?DocId=355241

How and where I can build the logic to calculate between cal days?

Similar Messages

Maybe you are looking for