How AP_SUPPLIER_SITES_ALL.EDI_ID_NUMBER is getting populated

Hi,
Please help me in checking how the AP_SUPPLIER_SITES_ALL.EDI_ID_NUMBER is getting populated and if it is being shown in the front end?
-pat

Hi Shatrughan Singh,
How to check whether the material in SO is configurable material or not.
MARC-CUOBJ field Int. object number is not updated for the material i am using.
Thanks in Advance.
Regards,
Harsha P

Similar Messages

  • How is VBDKR - ZTERM_TX1 gets populated ? Payment terms ...

    Hi,
    How does VBDKR-ZTERM_TX1 VBDKR-ZTERM_TX2 and VBDKR-ZTERM_TX3 get populated? Currently I see that in the INVOIC IDOC the payment term is populated from VBDKR-ZTERM_TX1 which is not based on payment terms. , I am getting the value 'Payable immediately without deduction'. I was wondering how did this value get populated which is different from the text maintained for paylemt term in table T052 table.
    IDOC segment : E1EDK18-ZTERM_TXT
    I see that the payment terms in the master table are carried onto Sales order and then to billing document which match the T052 value of the payment term but the IDOC is pulling some other value from some where.
    Regards
    Praneeth
    Edited by: gansprasan on Oct 26, 2011 12:36 PM

    Hi All,
    All the information  provided helped me in determining the logic from where this additional text is extracted.
    Actually the new text is a more descriptive text of the same payment terms we see on the SD documents with additional information like percentage, base line date to give more information to the end customer as the info on the payment term in SD document is very brief.
    SD_PRINT_TERMS_OF_PAYMENT Function module has the text embedded within the text elements and is pulling this text based on some additional logic inside the FM program.
    Regards
    Praneeth

  • How many minimum tables get Populated once Employee Created in People scree

    Hi
    how many minimum tables get Populated once Employee Created in People screen ?
    thanx

    per_all_people_f
    per_periods_of_service
    per_person_type_usages_f
    per_all_assignments_f (as a primary assignment is mandatory for employee)

  • How suggested buyer id gets populated in requisition lines

    How suggested buyer id gets populated in requisition lines when we select the external catalog? Where we need to do the setup? Please suggest.

    Sorry, I have misguided you a little.
    You can do that using POR_CUSTOM_PKG client extension provided by Oracle for iProcurement.
    Assign the suggested buyer value in the line defaults function.
    Thanks,
    PS.

  • How does example field get populated in the results (pmd.xml) file ?

    How does the <example> element in the rulepack file, get populated in the pmd.xml file ?

    Hi,
    The example field does not get populated and won't be for two reasons:
    - The Xpmd products don't do it and we want to keep the same XML schema than the others so that FlexPMD reports remain compatible with third party tools (like the PMD Hudson plugin, and XSL script)
    - That would have a high impact on the report size. Imagine that you have 2000+ violations in your report...
    That being said, it will be possible to retrieve the example section from the Flash Builder plugin in the outline view.
    Best regards,
    Xavier

  • How this PLAF-ABMNG gets populated?

    I'm looking at a few planned orders and all these have the Reduced quantity in the planned order - PLAF-ABMNG filled with values. Not sure how they are getting populated. Appreciate your reply.
    Thanks,
    Siva

    Dear Sivakumar,
    This value PLAF - ABMNG will get updated after the confirmation is made in MFBF or
    MF42N.
    Say for the planned order number 1000050 where the order quantity is 500,and if you have confirmed
    say 100 quantity,now in the planned order you will be able to see the reduced quantity as 100 and the
    order quantity say 400.
    Check and revert back.
    Regards
    Mangalraj.S

  • How service render date gets populated ?

    Hi
    I am looking for the logic by which FBUDA (structure RV60A) i.e. service render date is getting populated when we are using vf04 and we are not inputting the service render date in the parameters?
    Thanks in advance
    Shubhankar Rai

    Hi Yadav,
    My requirement is to put the billing date in service render date
    I.e. in my scenario the Actual GI date is populating into billing date and also in service render date (komk-fbuda)
    If we enter billing date manually while creating the billing that should be reflect in service render date, in condition level.
    Here it is not happening, it is taking the Actual GI date in service render date,
    Here VBRP-FBUDA is different form komk-fbuda.
    Vbrp-fbuda is have to reflect form Actual GI date only
    My requirement is, I need to populate the billing date into service render date for some conditions only. These conditions are rebate type conditions.
    I can populate the billing date to all conditions not for particular conditions
    In user exit userexit_pricing_prepare_tkomk
    I can move the vbrk-fkdat to tkomk-fbuda
    But this not my requirement
    I need to populate the billing date to service render date to some conditions types only
    In this exit I canu2019t restrict the conditions, I mean in this routine I am not able to select the condition types
    Please advice me where can I write the code to achieve my functionality
    Thanks in Advance
    Jaya.G

  • How does W_MCAL_DAY_D table gets populated?

    Guys,
    I am having an issue with the table W_MCAL_DAY_D. I have the data loaded into this table till 12/31/2010. I do not see the data for the year 2011.Can anyone please help to understand how i can populate this table with the data for the year 2011?
    Thanks in advance.

    Hi,
    First check whether w_day_d is populated for the year 2011 or not. If not you need to populate W_DAY_D table till 2011 or till the required year. After that it will populate w_mcal_day_d.
    Anyone please correct me if am wrong....
    Thanks,
    Navin Kumar Bolla

  • How does a table get populated.

    Hi,
    I am working on a report that picks up data from the table PPFTTRIGG. The report works fine when there are entries in the table. however I noticed that the table is getting filled randomly and hence the reports output is not proper. So my question is, how do I find wat populates a table. I tried the where used list and got nothing out of it. I looked at the program and the BADIs that could possibly populate the table. none of these have helped me find this out. Can anybody please give me a clue.

    New for me, but the SAP help gives a good impression of the possibilities:
    http://help.sap.com/saphelp_nw70/helpdata/en/de/a38338d22aa947e10000009b38f8cf/frameset.htm
    http://help.sap.com/saphelp_nw70/helpdata/en/3b/a985389e732f3ce10000009b38f8cf/content.htm
    Cheers,
    Edwin.

  • How are document elements getting populated.

    I'm trouble-shooting a new Oracle Apex application developed by my predecessor. I see that some variables are being populated by document elements, i.e. var method = document.getElementByID(tlineid).value;
    How are the document elements being populated?
    Some of the places I've looked on the page (Home>Application Builder > Application 147 > Page 4):
    The entire HTML Header;
    All of the regions;
    All of the items;
    The process
    The branch;
    The Lists of Values and
    the Templates.
    Where am I missing?

    Also check the buttons, report column links, application processes (shared components) etc...
    What actions trigger the elements to be populated? Start tracing the events from there.
    Is it a database procedure? Default value, function on the item being populated? or DML automatic fetch on a table database?

  • How the storage unit get populated automatically in TO during GR?

    Hi,
    I have a question to ask you with regards to SU in WM.
    I perform a goods receipt against a production order in MIGO.
    and I notice the Transfer Requirement get created and the Transfer Order also get created automatically in the background.
    My question is the system also automatically assign a storage unit in the transfer order (LTAP-NLENR), may I know what system configuration is requre to setup such automatic SU created for the TO, where in SPRO?
    In between this is a "Bulk Storage" Strategy used in this storage type.
    thanks
    tuff

    If your destination storage type is SU managed and you have an internal number range assigned then system will automatically propose the the SU number (trhe next number from the number range)

  • How does Residual Element gets populated in PTO

    Hi,
    I am writing Carryover formula for Privilege Leave. My requirement is that I need to carryover maximum 180 leaves. Those leaves which cannot be carried forward (excess of 180) will be stored in Privilege Residual. The maximum limit for Residual is 30. The leaves excess of 180+30 will be lapsed.
    I know how to populate carryover using carryover process. But I don't know how to populate residual and also how to set the limit for residual.
    Please help!!
    Abhay

    Standard functionality doesn't quite let you do what you want. When you write the Carry Over Fast Formula you specify these Outputs:
    RETURN Max_Carryover
    ,Effective_Date
    ,Expiry_Date
    ,Process
    The Max_Carryover is the key Output: this determines the carryover ceiling. For example, if you set this to 180 and your employee has a balance of 190 at the end of the year the process will carryover 180 and set the residual to 10. These values are stored in the Carryover and Residual element entry accordingly. That's okay so far.
    However, if an employee has 220 remaining (and you keep the carryover ceiling at 180) the process will carryover 180 and leave 40 residual. So whilst the standard functionality allows you to define the carryover ceiling it does not allow you to define a residual ceiling. After all, residual is the amount left over not some of what's left over.
    You could of course write a custom process that goes through your residual elements once carryover has been run and cap them at 30, or update them manually if there's only a few.
    What's the use scenario for wanting to cap residual?

  • How to find when a ztable gets populated?

    Hi Folks,
    Closing balance not carrying forward to Opening Balance-MM  
    Previously I posted a question with the above said subject.But couldn't get any right lead.
    The problem is we have developed a zreport to get the RG1 summary of finished goods.For that the previous team who worked on this had copied the table
    j_2irg1bal to z2irg1bal.I want to know when and how this ztable will get populated.
    Can anyone here please go through the BOLD part of this code and let me know.
    K.Kiran.
    REPORT zxxx MESSAGE-ID z_apd.
    *& Includes *
    INCLUDE <icon>.
    *& Tables *
    TABLES : j_1irg1,
    j_2irg1bal,
    z2irg1bal,
    ser03,
    objk.
    *& Selection Screen *
    SELECTION-SCREEN : BEGIN OF BLOCK blk1 WITH FRAME TITLE text-001.
    PARAMETERS : p_exgrp TYPE j_1irg1-exgrp OBLIGATORY,
    p_stdate LIKE sy-datum OBLIGATORY,
    p_endate LIKE sy-datum OBLIGATORY.
    SELECT-OPTIONS s_chapid FOR j_1irg1-chapid .
    SELECTION-SCREEN : END OF BLOCK blk1.
    *& Data Declaration *
    Internal Tables
    DATA : it_display TYPE TABLE OF zj1irg1,
    it_final TYPE TABLE OF zj1irg1,
    it_alv TYPE TABLE OF zj1irg1,
    Work Areas
    wa_display TYPE zj1irg1,
    wa_alv TYPE zj1irg1,
    it_display1 TYPE TABLE OF zj1irg1,
    wa_display1 TYPE zj1irg1,
    wa_alv1 TYPE zj1irg1.
    DATA: BEGIN OF it_itab OCCURS 0.
    INCLUDE STRUCTURE zj1irg1.
    DATA: END OF it_itab.
    DATA : BEGIN OF itab1 OCCURS 0,
    matnr LIKE j_1irg1-matnr,
    END OF itab1.
    DATA : BEGIN OF itab2 OCCURS 0,
    cpudt LIKE j_1irg1-cpudt,
    END OF itab2.
    DATA : BEGIN OF itab3 OCCURS 0.
    INCLUDE STRUCTURE j_1irg1.
    DATA: END OF itab3.
    DATA : itab4 LIKE j_1irg1 OCCURS 0 WITH HEADER LINE,
    itab5 LIKE j_1irg1 OCCURS 0 WITH HEADER LINE.
    DATA : BEGIN OF itab6 OCCURS 0.
    INCLUDE STRUCTURE j_1irg1.
    DATA : sernr LIKE objk-sernr.
    DATA: END OF itab6.
    DATA : BEGIN OF itab61 OCCURS 0.
    INCLUDE STRUCTURE j_1irg1.
    DATA: sernr LIKE objk-sernr.
    DATA: END OF itab61.
    DATA : itab7 LIKE j_2irg1bal OCCURS 0 WITH HEADER LINE,
    it_bal LIKE j_2irg1bal OCCURS 0 WITH HEADER LINE,
    it_bal1 LIKE j_2irg1bal OCCURS 0 WITH HEADER LINE.
    DATA: qty_menge LIKE j_1irg1-menge,
    iss_menge LIKE j_1irg1-menge,
    tot_menge LIKE j_1irg1-menge,
    op_menge LIKE j_1irg1-menge,
    matnr LIKE j_1irg1-matnr,
    exgrp LIKE j_1irg1-exgrp ,
    cpudt LIKE j_1irg1-cpudt.
    *for checcking lines of itab
    DATA: n1 TYPE i.
    Others
    DATA : v_bwart TYPE mseg-bwart,
    v_index TYPE i,
    v_index1 TYPE i,
    count(4) TYPE n VALUE '0',
    neg TYPE char1 VALUE '-',
    menge TYPE char16,
    count_1 TYPE i,
    count_2 TYPE i,
    count_3 TYPE i,
    count12(4) TYPE n VALUE '0',
    count13(4) TYPE n VALUE '0'.
    *Ranges
    RANGES: v_bwart1 FOR mseg-bwart.
    For ALV Display
    DATA : gs_variant TYPE disvariant,
    gs_layout TYPE lvc_s_layo,
    c_stk TYPE scrfname VALUE 'ZRG1',
    custom_container TYPE REF TO cl_gui_custom_container.
    CLASS lcl_event_receiver DEFINITION DEFERRED.
    DATA : grid1 TYPE REF TO cl_gui_alv_grid,
    event_receiver TYPE REF TO lcl_event_receiver,
    ok_code TYPE sy-ucomm,
    it_fieldcatalog TYPE lvc_t_fcat,
    wafieldcatlog TYPE LINE OF lvc_t_fcat,
    lt_rows TYPE lvc_t_row,
    wa_rows TYPE LINE OF lvc_t_row.
    *& Start of Selection *
    START-OF-SELECTION.
    IMPORT s_chapid FROM MEMORY ID 'SCHAPID'.
    PERFORM get_data.
    IF it_display[] IS INITIAL.
    No Details Available
    MESSAGE i017(z_apd) WITH text-005.
    STOP.
    ELSE.
    Display the Details on the Screen
    sort it_display by matnr.
    *sort it_display by cpudt RISINDR RISINDI matnr.
    <b>LOOP AT it_display INTO wa_display.
    ON CHANGE OF wa_display-matnr.
    *insert
    *Check record exits
    SELECT SINGLE * FROM z2irg1bal
    WHERE
    exgrp = exgrp AND
    matnr = matnr AND
    form = 'P' AND
    cb_finish = tot_menge AND
    datum = cpudt.
    *If record does not exists
    *Update balance Table.
    IF count12 GE 1.
    IF sy-subrc NE 0.
    z2irg1bal-mandt = sy-mandt.
    z2irg1bal-exgrp = exgrp.
    z2irg1bal-matnr = matnr.
    z2irg1bal-form = 'P'.
    z2irg1bal-cb_finish = tot_menge.
    z2irg1bal-datum = cpudt.
    INSERT z2irg1bal ."values wa_display.
    COMMIT WORK.
    ENDIF.
    Start of Insertion
    IF sy-subrc EQ 0.
    z2irg1bal-mandt = sy-mandt.
    z2irg1bal-exgrp = exgrp.
    z2irg1bal-matnr = matnr.
    z2irg1bal-form = 'P'.
    z2irg1bal-cb_finish = tot_menge.
    z2irg1bal-datum = cpudt.
    UPDATE z2irg1bal SET cb_finish = z2irg1bal-cb_finish
    WHERE exgrp = z2irg1bal-exgrp AND
    datum = z2irg1bal-datum AND
    matnr = z2irg1bal-matnr AND
    form = 'P'.
    ENDIF.
    End of Insertion.
    ENDIF.</b>CLEAR: qty_menge,
    iss_menge,
    tot_menge,
    count,
    matnr,
    cpudt,
    exgrp.
    ENDON.
    loop at itab6.
    AT NEW matnr.
    v_index = 1.
    count = count + 1 .
    ENDAT.
    IF v_index = 1.
    CLEAR v_index.
    *INsert for adding start
    IF wa_display-risind = 'R'.
    *wa_display-OP_FINISH = wa_display-OP_FINISH +
    wa_display-CB_FINISH +
    wa_display-MENGE.
    wa_display-op_finish = wa_display-menge.
    qty_menge = wa_display-op_finish.
    IF wa_display-status = space.
    tot_menge = tot_menge + qty_menge + wa_display-cb_finish .
    ELSE.
    tot_menge = tot_menge - qty_menge + wa_display-cb_finish.
    ENDIF.
    *tot_menge = op_menge.
    op_menge = tot_menge.
    ELSE.
    *Qty Issued
    wa_display-op_bond = wa_display-op_finish - wa_display-menge.
    IF wa_display-op_bond LT 0.
    iss_menge = wa_display-op_bond.
    iss_menge = ABS( iss_menge ).
    *Start of modification
    tot_MENGE = tot_MENGE - iss_MENGE ."
    IF count LE 1.
    tot_menge = wa_display-cb_finish - iss_menge ."
    ELSE.
    tot_menge = tot_menge - iss_menge ."
    ENDIF.
    *End of modification
    op_menge = tot_menge.
    ENDIF.
    ENDIF.
    *wa_display-MENGE_FINI = wa_display-OP_FINISH - wa_display-OP_BOND.
    *tot_MENGE = tot_MENGE + qty_MENGE - iss_MENGE .
    wa_display-menge_fini = tot_menge.
    **matnr for insert
    matnr = wa_display-matnr.
    *excise group
    exgrp = wa_display-exgrp.
    *Date
    cpudt = wa_display-cpudt.
    *Opening Balance
    *Insert start
    *if count le 1.
    if wa_display-RISIND = 'R'.
    wa_display-CB_FINISH = wa_display-CB_FINISH + qty_MENGE.
    else.
    wa_display-CB_FINISH = wa_display-CB_FINISH - iss_MENGE.
    endif.
    *endif.
    *Insert End
    IF count GT 1.
    IF wa_display-risind = 'R'.
    wa_display-cb_finish = tot_menge - qty_menge.
    ELSE.
    wa_display-cb_finish = tot_menge + iss_menge.
    ENDIF.
    ENDIF.
    *check it_display-SERIALNO = wa_display-SERIALNO.
    MODIFY it_display FROM wa_display.
    *INsert for adding end
    *move-corresponding wa_display to it_itab.
    *append it_itab.
    *check it_itab-SERIALNO = wa_display-SERIALNO.
    *if sy-subrc = 0.
    *endif.
    *Insert to update closng to balance to Rg1bal table
    *start
    count12 = count12 + 1.
    *for last record
    AT LAST.
    *Check record exits
    SELECT SINGLE * FROM z2irg1bal
    WHERE
    exgrp = exgrp AND
    matnr = matnr AND
    form = 'P' AND
    cb_finish = tot_menge AND
    datum = cpudt.
    *If record does not exists
    *Update balance Table.
    IF count12 GE 1.
    IF sy-subrc NE 0.
    z2irg1bal-mandt = sy-mandt.
    z2irg1bal-exgrp = exgrp.
    z2irg1bal-matnr = matnr.
    z2irg1bal-form = 'P'.
    z2irg1bal-cb_finish = tot_menge.
    z2irg1bal-datum = cpudt.
    INSERT z2irg1bal ."values wa_display.
    COMMIT WORK.
    Start of Insertion
    IF sy-subrc EQ 0.
    z2irg1bal-mandt = sy-mandt.
    z2irg1bal-exgrp = exgrp.
    z2irg1bal-matnr = matnr.
    z2irg1bal-form = 'P'.
    z2irg1bal-cb_finish = tot_menge.
    z2irg1bal-datum = cpudt.
    UPDATE z2irg1bal SET cb_finish = z2irg1bal-cb_finish
    WHERE exgrp = z2irg1bal-exgrp AND
    datum = z2irg1bal-datum AND
    matnr = z2irg1bal-matnr AND
    form = 'P'.
    ENDIF.
    End of Insertion
    ENDIF.
    ENDIF.
    ENDAT.
    *Insert to update closng to balance to Rg1bal table
    *end
    MOVE-CORRESPONDING wa_display TO wa_alv.
    APPEND wa_alv TO it_alv.
    append itab6 to it_alv.
    ENDIF.
    ENDLOOP.
    loop at it_alv into wa_alv.
    wa_alv-exgrp = wa_alv-exgrp.
    wa_alv-SYEAR = wa_alv-syear.
    wa_alv-SERIALNO = wa_alv-SERIALNO.
    endloop.
    EXPORT it_alv TO MEMORY ID 'ABCD'.
    call screen 100.
    ENDIF.
    *& End of Selection *
    END-OF-SELECTION.
    *& Class Definition *
    CLASS lcl_event_receiver DEFINITION.
    PUBLIC SECTION.
    METHODS:
    handle_toolbar
    FOR EVENT toolbar OF cl_gui_alv_grid
    IMPORTING e_object e_interactive,
    handle_user_command
    FOR EVENT user_command OF cl_gui_alv_grid
    IMPORTING e_ucomm,
    handle_double_click
    FOR EVENT double_click OF cl_gui_alv_grid
    IMPORTING e_row e_column.
    PRIVATE SECTION.
    ENDCLASS. "lcl_event_receiver DEFINITION
    *& Class Implementation *
    CLASS lcl_event_receiver IMPLEMENTATION.
    METHOD handle_toolbar.
    Local Variables
    DATA: ls_toolbar TYPE stb_button.
    append a separator to normal toolbar
    CLEAR ls_toolbar.
    MOVE 3 TO ls_toolbar-butn_type.
    APPEND ls_toolbar TO e_object->mt_toolbar.
    append an icon to to show printing
    CLEAR ls_toolbar.
    MOVE 'PRINT' TO ls_toolbar-function.
    MOVE icon_print TO ls_toolbar-icon.
    MOVE 'Print Receipts' TO ls_toolbar-quickinfo.
    MOVE ' Print' TO ls_toolbar-text.
    MOVE ' ' TO ls_toolbar-disabled.
    APPEND ls_toolbar TO e_object->mt_toolbar.
    ENDMETHOD. " Handle_toolbar
    METHOD handle_user_command.
    CASE e_ucomm.
    WHEN 'PRINT'.
    REFRESH : lt_rows , it_final.
    CALL METHOD grid1->get_selected_rows
    IMPORTING
    et_index_rows = lt_rows.
    CALL METHOD cl_gui_cfw=>flush.
    LOOP AT lt_rows INTO wa_rows.
    READ TABLE it_alv INDEX wa_rows-index INTO wa_alv.
    LOOP AT it_display INTO wa_display
    WHERE mblnr = wa_alv-mblnr.
    APPEND wa_display TO it_final.
    ENDLOOP.
    ENDLOOP.
    perform display_form.
    ENDCASE.
    ENDMETHOD. "handle_user_command
    METHOD handle_double_click.
    IF e_column = 'MBLNR'.
    READ TABLE it_alv INDEX e_row-index INTO wa_alv.
    IF sy-subrc = 0.
    REFRESH it_final.
    LOOP AT it_display INTO wa_display
    WHERE mblnr = wa_alv-mblnr.
    APPEND wa_display TO it_final.
    ENDLOOP.
    PERFORM call_migo.
    ENDIF.
    ENDIF.
    ENDMETHOD. "handle_double_click
    ENDCLASS. "lcl_event_receiver IMPLEMENTATION
    *& Form get_data
    text
    --> p1 text
    <-- p2 text
    FORM get_data .
    *Select only for matnr and chapid from table
    SELECT matnr FROM j_1irg1
    APPENDING CORRESPONDING FIELDS OF TABLE itab1
    WHERE exgrp = p_exgrp
    AND
    WERKS = P_WERKS
    and
    MATNR in s_MATNR
    and
    CPUDT in s_CPUDT.
    cpudt BETWEEN p_stdate AND p_endate
    AND
    *Chapid
    chapid IN s_chapid
    ORDER BY matnr.
    SORT itab1 BY matnr. " for performance
    DELETE ADJACENT DUPLICATES FROM itab1 COMPARING matnr .
    SELECT cpudt FROM j_1irg1
    APPENDING CORRESPONDING FIELDS OF TABLE itab2
    WHERE exgrp = p_exgrp
    AND
    cpudt BETWEEN p_stdate AND p_endate
    AND
    *Chapid
    chapid IN s_chapid
    ORDER BY cpudt.
    SORT itab2 BY cpudt. " for Performance
    DELETE ADJACENT DUPLICATES FROM itab2 COMPARING cpudt .
    LOOP AT itab1.
    LOOP AT itab2.
    *on change of itab1-matnr or itab2-cpudt.
    *select * from J_1IRG1
    CLEAR itab3.
    SELECT * FROM j_1irg1
    *into itab3
    APPENDING CORRESPONDING FIELDS OF TABLE itab3
    WHERE matnr = itab1-matnr
    AND
    cpudt = itab2-cpudt.
    *count = count + 1.
    IF sy-subrc EQ 0.
    LOOP AT itab3.
    *count = count + 1.
    *READ TABLE itab3 INDEX count."1.
    IF itab3-risind = 'R'.
    MOVE-CORRESPONDING itab3 TO itab4.
    APPEND itab4.
    DELETE itab3.
    MOVE-CORRESPONDING itab4 TO itab6.
    APPEND itab6.
    CLEAR itab4.
    ELSE.
    MOVE-CORRESPONDING itab3 TO itab5.
    APPEND itab5.
    DELETE itab3.
    MOVE-CORRESPONDING itab5 TO itab6.
    APPEND itab6.
    CLEAR itab5.
    ENDIF.
    ENDLOOP.
    ENDIF.
    *endon.
    ENDLOOP.
    ENDLOOP.
    SELECT * FROM z2irg1bal
    APPENDING CORRESPONDING FIELDS OF TABLE itab7
    WHERE exgrp = p_exgrp
    AND
    datum LE p_stdate
    ORDER BY datum.
    SORT itab7 BY datum.
    DELETE ADJACENT DUPLICATES FROM itab7 COMPARING datum .
    *insert Start
    LOOP AT itab6.
    DELETE itab7 WHERE matnr NE itab6-matnr.
    ENDLOOP.
    *insert End
    *insert Start
    LOOP AT itab6.
    CLEAR itab61. REFRESH itab61.
    CLEAR wa_display.
    MOVE-CORRESPONDING itab6 TO wa_display.
    EQPT Serno
    count13 = 1.
    SELECT SINGLE obknr FROM ser03 INTO ser03-obknr WHERE
    mblnr EQ itab6-mblnr
    AND mjahr EQ itab6-mjahr.
    IF sy-subrc EQ 0.
    SELECT sernr FROM objk INTO CORRESPONDING
    FIELDS OF TABLE itab61 WHERE
    obknr EQ ser03-obknr.
    DESCRIBE TABLE itab61 LINES n1.
    *do N1 times.
    LOOP AT itab61.
    IF count13 EQ 1.
    wa_display-sernr = itab61-sernr.
    ENDIF.
    IF count13 EQ 2.
    wa_display-sernr1 = itab61-sernr.
    ENDIF.
    IF count13 EQ 3.
    wa_display-sernr2 = itab61-sernr.
    ENDIF.
    IF count13 EQ 4.
    wa_display-sernr3 = itab61-sernr.
    ENDIF.
    IF count13 EQ 5.
    wa_display-sernr4 = itab61-sernr.
    ENDIF.
    IF count13 EQ 6.
    wa_display-sernr5 = itab61-sernr.
    ENDIF.
    IF count13 EQ 7.
    wa_display-sernr6 = itab61-sernr.
    ENDIF.
    if count13 eq 8.
    objk-SERNR8 = objk-SERNR.
    endif.
    if count13 eq 9.
    objk-SERNR9 = objk-SERNR.
    endif.
    count13 = count13 + 1.
    endselect.
    ENDLOOP.
    *enddo.
    ENDIF.
    endif.
    *End of Modification Eqpt Serial No
    MOVE-CORRESPONDING itab6 TO wa_display.
    SELECT * FROM z2irg1bal
    APPENDING CORRESPONDING FIELDS OF TABLE it_bal1
    WHERE matnr = itab6-matnr
    AND datum LE p_stdate
    AND exgrp = itab6-exgrp.
    SORT it_bal1 DESCENDING .
    READ TABLE it_bal1 INDEX 1.
    ON CHANGE OF itab6-matnr .
    wa_display-cb_finish = it_bal1-cb_finish.
    ENDON.
    AT LAST ."matnr.
    wa_display-cb_finish = it_bal1-cb_finish.
    ENDAT.
    APPEND wa_display TO it_display .
    CLEAR wa_display-cb_finish.
    CLEAR it_bal1. REFRESH it_bal1.
    ENDLOOP.
    SELECT * FROM j_1irg1
    APPENDING CORRESPONDING FIELDS OF TABLE it_itab
    WHERE exgrp = p_exgrp
    AND
    cpudt BETWEEN p_stdate AND p_endate.
    DESCRIBE TABLE it_itab[] LINES count_1.
    count_3 = count_1 + 1.
    DESCRIBE TABLE it_display[] LINES count_2.
    IF it_display IS NOT INITIAL.
    DELETE it_display FROM count_3 TO count_2.
    ENDIF.
    *start of insertion
    DELETE it_display WHERE status = 'C'.
    LOOP AT it_display INTO wa_display.
    CLEAR wa_display-cb_finish.
    MODIFY it_display FROM wa_display.
    ON CHANGE OF wa_display-matnr .
    SELECT * FROM z2irg1bal
    INTO CORRESPONDING FIELDS OF TABLE it_bal1
    WHERE matnr = wa_display-matnr
    AND datum LE p_stdate
    AND exgrp = wa_display-exgrp.
    IF sy-subrc = 0.
    SORT it_bal1 DESCENDING .
    READ TABLE it_bal1 INDEX 1.
    wa_display-cb_finish = it_bal1-cb_finish.
    MODIFY it_display FROM wa_display.
    ENDIF.
    ENDON.
    ENDLOOP.
    *End of insertion
    ENDFORM. " get_data
    *& Module STATUS_0100 OUTPUT
    text
    MODULE status_0100 OUTPUT.
    SET PF-STATUS 'ZRG1'.
    SET TITLEBAR 'ZRG1'.
    DATA: lt_exclude TYPE ui_functions.
    IF custom_container IS INITIAL.
    Create the Custom Container
    CREATE OBJECT custom_container
    EXPORTING
    container_name = c_stk.
    Create an instance of alv control
    CREATE OBJECT grid1
    EXPORTING
    i_parent = custom_container.
    Layout Settings
    gs_layout-sel_mode = 'A'. " Multiple Lines
    MOVE 'RG1 Register' TO gs_layout-grid_title.
    Prepare the Field Catalog
    PERFORM prepare_catalog.
    To Exclude the PRINT Button from the Standard toolbar of ALV
    PERFORM exclude_tb_functions CHANGING lt_exclude.
    Display the List for ALV Display
    CALL METHOD grid1->set_table_for_first_display
    EXPORTING
    it_toolbar_excluding = lt_exclude
    is_layout = gs_layout
    CHANGING
    it_fieldcatalog = it_fieldcatalog[]
    it_outtab = it_alv[].
    CREATE OBJECT event_receiver.
    SET HANDLER event_receiver->handle_user_command FOR grid1.
    SET HANDLER event_receiver->handle_toolbar FOR grid1.
    SET HANDLER event_receiver->handle_double_click FOR grid1.
    CALL METHOD grid1->set_toolbar_interactive.
    ENDIF.
    CALL METHOD cl_gui_control=>set_focus
    EXPORTING
    control = grid1.
    ENDMODULE. " STATUS_0100 OUTPUT
    *& Form exclude_tb_functions
    text
    <--P_LT_EXCLUDE text
    FORM exclude_tb_functions CHANGING pt_exclude TYPE ui_functions.
    Local Varaibles
    DATA ls_exclude TYPE ui_func.
    ls_exclude = cl_gui_alv_grid=>mc_fc_print.
    APPEND ls_exclude TO pt_exclude.
    ENDFORM. " exclude_tb_functions
    *& Form prepare_catalog
    text
    --> p1 text
    <-- p2 text
    FORM prepare_catalog .
    DATA : v_index TYPE i.
    *Entry Date
    v_index = v_index + 1.
    wafieldcatlog-fieldname = 'CPUDT'.
    wafieldcatlog-tabname = 'IT_ALV'.
    wafieldcatlog-seltext = 'RG1 Entry Date'.
    wafieldcatlog-reptext = 'RG1 Entry Date'.
    wafieldcatlog-hotspot = ' '.
    wafieldcatlog-col_pos = v_index.
    APPEND wafieldcatlog TO it_fieldcatalog.
    CLEAR wafieldcatlog-reptext.
    CLEAR wafieldcatlog-key.
    *Serial No
    v_index = v_index + 1.
    wafieldcatlog-fieldname = 'SERIALNO'.
    wafieldcatlog-tabname = 'IT_ALV'.
    wafieldcatlog-seltext = 'RG1 serial number'.
    wafieldcatlog-reptext = 'RG1 serial number'.
    wafieldcatlog-hotspot = ' '.
    wafieldcatlog-col_pos = v_index.
    APPEND wafieldcatlog TO it_fieldcatalog.
    CLEAR wafieldcatlog-reptext.
    CLEAR wafieldcatlog-key.
    v_index = v_index + 1.
    wafieldcatlog-fieldname = 'CHAPID'.
    wafieldcatlog-tabname = 'IT_ALV'.
    wafieldcatlog-seltext = 'Chapter ID'.
    wafieldcatlog-reptext = 'Chapter ID'.
    wafieldcatlog-hotspot = ' '.
    wafieldcatlog-col_pos = v_index.
    APPEND wafieldcatlog TO it_fieldcatalog.
    CLEAR wafieldcatlog-reptext.
    CLEAR wafieldcatlog-key.
    v_index = v_index + 1.
    wafieldcatlog-fieldname = 'MBLNR'.
    wafieldcatlog-tabname = 'IT_ALV'.
    wafieldcatlog-seltext = 'Number of Material Document'.
    wafieldcatlog-reptext = 'Number of Material Document'.
    wafieldcatlog-hotspot = ' '.
    wafieldcatlog-col_pos = v_index.
    APPEND wafieldcatlog TO it_fieldcatalog.
    CLEAR wafieldcatlog-reptext.
    CLEAR wafieldcatlog-key.
    *Item
    v_index = v_index + 1.
    wafieldcatlog-fieldname = 'ZEILE'.
    wafieldcatlog-tabname = 'IT_ALV'.
    wafieldcatlog-seltext = 'Item in Material Document'.
    wafieldcatlog-reptext = 'Item in Material Document'.
    wafieldcatlog-hotspot = ' '.
    wafieldcatlog-col_pos = v_index.
    APPEND wafieldcatlog TO it_fieldcatalog.
    CLEAR wafieldcatlog-reptext.
    CLEAR wafieldcatlog-key.
    v_index = v_index + 1.
    wafieldcatlog-fieldname = 'BWART'.
    wafieldcatlog-tabname = 'IT_ALV'.
    wafieldcatlog-seltext = 'Movement Type'.
    wafieldcatlog-reptext = 'Movement Type'.
    wafieldcatlog-hotspot = ' '.
    wafieldcatlog-col_pos = v_index.
    APPEND wafieldcatlog TO it_fieldcatalog.
    CLEAR wafieldcatlog-reptext.
    CLEAR wafieldcatlog-key.
    v_index = v_index + 1.
    wafieldcatlog-fieldname = 'MENGE'.
    wafieldcatlog-tabname = 'IT_ALV'.
    wafieldcatlog-seltext = 'Quantity'.
    wafieldcatlog-reptext = 'Quantity'.
    wafieldcatlog-hotspot = ' '.
    wafieldcatlog-col_pos = v_index.
    wafieldcatlog-DO_SUM = 'X'.
    append wafieldcatlog to it_fieldcatalog.
    clear wafieldcatlog-reptext.
    clear wafieldcatlog-key.
    *Base Unit of Measure
    v_index = v_index + 1.
    wafieldcatlog-fieldname = 'MEINS'.
    wafieldcatlog-tabname = 'IT_ALV'.
    wafieldcatlog-seltext = 'Base Unit of Measure'.
    wafieldcatlog-reptext = 'Base Unit of Measure'.
    wafieldcatlog-hotspot = ' '.
    wafieldcatlog-col_pos = v_index.
    wafieldcatlog-do_sum = 'X'.
    APPEND wafieldcatlog TO it_fieldcatalog.
    CLEAR wafieldcatlog-reptext.
    CLEAR wafieldcatlog-key.
    v_index = v_index + 1.
    wafieldcatlog-fieldname = 'RISIND'.
    wafieldcatlog-tabname = 'IT_ALV'.
    wafieldcatlog-seltext = 'Goods Movement Direction'.
    wafieldcatlog-reptext = 'Goods Movement Direction'.
    wafieldcatlog-hotspot = ' '.
    wafieldcatlog-col_pos = v_index.
    APPEND wafieldcatlog TO it_fieldcatalog.
    CLEAR wafieldcatlog-reptext.
    CLEAR wafieldcatlog-key.
    *Material Number
    v_index = v_index + 1.
    wafieldcatlog-fieldname = 'MATNR'.
    wafieldcatlog-tabname = 'IT_ALV'.
    wafieldcatlog-seltext = 'Material Number'.
    wafieldcatlog-reptext = 'Material Number'.
    wafieldcatlog-hotspot = ' '.
    wafieldcatlog-col_pos = v_index.
    APPEND wafieldcatlog TO it_fieldcatalog.
    CLEAR wafieldcatlog-reptext.
    CLEAR wafieldcatlog-key.
    *CB_FINISH
    v_index = v_index + 1.
    wafieldcatlog-fieldname = 'CB_FINISH'.
    wafieldcatlog-tabname = 'IT_ALV'.
    wafieldcatlog-seltext = 'Opening Balance'.
    wafieldcatlog-reptext = 'Opening Balance'.
    wafieldcatlog-hotspot = ' '.
    wafieldcatlog-col_pos = v_index.
    APPEND wafieldcatlog TO it_fieldcatalog.
    CLEAR wafieldcatlog-reptext.
    CLEAR wafieldcatlog-key.
    *materail manufactured
    v_index = v_index + 1.
    wafieldcatlog-fieldname = 'OP_FINISH'.
    wafieldcatlog-tabname = 'IT_ALV'.
    wafieldcatlog-seltext = 'Qty Manufactured'.
    wafieldcatlog-reptext = 'Qty Manufactured'.
    wafieldcatlog-hotspot = ' '.
    wafieldcatlog-col_pos = v_index.
    APPEND wafieldcatlog TO it_fieldcatalog.
    CLEAR wafieldcatlog-reptext.
    CLEAR wafieldcatlog-key.
    *Material Issued
    v_index = v_index + 1.
    wafieldcatlog-fieldname = 'OP_BOND'.
    wafieldcatlog-tabname = 'IT_ALV'.
    wafieldcatlog-seltext = 'Qty Issue'.
    wafieldcatlog-reptext = 'Qty Issue'.
    wafieldcatlog-hotspot = ' '.
    wafieldcatlog-col_pos = v_index.
    APPEND wafieldcatlog TO it_fieldcatalog.
    CLEAR wafieldcatlog-reptext.
    CLEAR wafieldcatlog-key.
    *Total
    v_index = v_index + 1.
    wafieldcatlog-fieldname = 'MENGE_FINI'.
    wafieldcatlog-tabname = 'IT_ALV'.
    wafieldcatlog-seltext = 'Closing Balance'.
    wafieldcatlog-reptext = 'Closing Balance'.
    wafieldcatlog-hotspot = ' '.
    wafieldcatlog-col_pos = v_index.
    APPEND wafieldcatlog TO it_fieldcatalog.
    CLEAR wafieldcatlog-reptext.
    CLEAR wafieldcatlog-key.
    *Material Description
    v_index = v_index + 1.
    wafieldcatlog-fieldname = 'MAKTX'.
    wafieldcatlog-tabname = 'IT_ALV'.
    wafieldcatlog-seltext = 'Material Description'.
    wafieldcatlog-reptext = 'Material Description'.
    wafieldcatlog-hotspot = ' '.
    wafieldcatlog-col_pos = v_index.
    APPEND wafieldcatlog TO it_fieldcatalog.
    CLEAR wafieldcatlog-reptext.
    CLEAR wafieldcatlog-key.
    *Storage Location
    v_index = v_index + 1.
    wafieldcatlog-fieldname = 'LGORT'.
    wafieldcatlog-tabname = 'IT_ALV'.
    wafieldcatlog-seltext = 'Storage Location'.
    wafieldcatlog-reptext = 'Storage Location'.
    wafieldcatlog-hotspot = ' '.
    wafieldcatlog-col_pos = v_index.
    APPEND wafieldcatlog TO it_fieldcatalog.
    CLEAR wafieldcatlog-reptext.
    CLEAR wafieldcatlog-key.
    *Goods Movement Direction
    v_index = v_index + 1.
    wafieldcatlog-fieldname = 'RISIND'.
    wafieldcatlog-tabname = 'IT_ALV'.
    wafieldcatlog-seltext = 'Goods Movement Direction'.
    wafieldcatlog-reptext = 'Goods Movement Direction'.
    wafieldcatlog-hotspot = ' '.
    wafieldcatlog-col_pos = v_index.
    APPEND wafieldcatlog TO it_fieldcatalog.
    CLEAR wafieldcatlog-reptext.
    CLEAR wafieldcatlog-key.
    *Reference Document 1
    v_index = v_index + 1.
    wafieldcatlog-fieldname = 'RDOC1'.
    wafieldcatlog-tabname = 'IT_ALV'.
    wafieldcatlog-seltext = 'Reference Document 1'.
    wafieldcatlog-reptext = 'Reference Document 1'.
    wafieldcatlog-hotspot = ' '.
    wafieldcatlog-col_pos = v_index.
    APPEND wafieldcatlog TO it_fieldcatalog.
    CLEAR wafieldcatlog-reptext.
    CLEAR wafieldcatlog-key.
    *Excise Duty Base Amount
    v_index = v_index + 1.
    wafieldcatlog-fieldname = 'EXBAS'.
    wafieldcatlog-tabname = 'IT_ALV'.
    wafieldcatlog-seltext = 'Excise Duty Base Amount'.
    wafieldcatlog-reptext = 'Excise Duty Base Amount'.
    wafieldcatlog-hotspot = ' '.
    wafieldcatlog-col_pos = v_index.
    APPEND wafieldcatlog TO it_fieldcatalog.
    CLEAR wafieldcatlog-reptext.
    CLEAR wafieldcatlog-key.
    *Basic Excise Duty
    v_index = v_index + 1.
    wafieldcatlog-fieldname = 'EXBED'.
    wafieldcatlog-tabname = 'IT_ALV'.
    wafieldcatlog-seltext = 'Basic Excise Duty'.
    wafieldcatlog-reptext = 'Basic Excise Duty'.
    wafieldcatlog-hotspot = ' '.
    wafieldcatlog-col_pos = v_index.
    APPEND wafieldcatlog TO it_fieldcatalog.
    CLEAR wafieldcatlog-reptext.
    CLEAR wafieldcatlog-key.
    *Additional Excise Duty
    v_index = v_index + 1.
    wafieldcatlog-fieldname = 'EXAED'.
    wafieldcatlog-tabname = 'IT_ALV'.
    wafieldcatlog-seltext = 'Additional Excise Duty'.
    wafieldcatlog-reptext = 'Additional Excise Duty'.
    wafieldcatlog-hotspot = ' '.
    wafieldcatlog-col_pos = v_index.
    APPEND wafieldcatlog TO it_fieldcatalog.
    CLEAR wafieldcatlog-reptext.
    CLEAR wafieldcatlog-key.
    *Special Excise Duty
    v_index = v_index + 1.
    wafieldcatlog-fieldname = 'EXSED'.
    wafieldcatlog-tabname = 'IT_ALV'.
    wafieldcatlog-seltext = 'Special Excise Duty'.
    wafieldcatlog-reptext = 'Special Excise Duty'.
    wafieldcatlog-hotspot = ' '.
    wafieldcatlog-col_pos = v_index.
    APPEND wafieldcatlog TO it_fieldcatalog.
    CLEAR wafieldcatlog-reptext.
    CLEAR wafieldcatlog-key.
    *Cess amount
    v_index = v_index + 1.
    wafieldcatlog-fieldname = 'CESS'.
    wafieldcatlog-tabname = 'IT_ALV'.
    wafieldcatlog-seltext = 'Cess amount'.
    wafieldcatlog-reptext = 'Cess amount'.
    wafieldcatlog-hotspot = ' '.
    wafieldcatlog-col_pos = v_index.
    APPEND wafieldcatlog TO it_fieldcatalog.
    CLEAR wafieldcatlog-reptext.
    CLEAR wafieldcatlog-key.
    *ECS Value
    v_index = v_index + 1.
    wafieldcatlog-fieldname = 'ECS'.
    wafieldcatlog-tabname = 'IT_ALV'.
    wafieldcatlog-seltext = 'ECS Value'.
    wafieldcatlog-reptext = 'ECS Value'.
    wafieldcatlog-hotspot = ' '.
    wafieldcatlog-col_pos = v_index.
    APPEND wafieldcatlog TO it_fieldcatalog.
    CLEAR wafieldcatlog-reptext.
    CLEAR wafieldcatlog-key.
    **Register Entry Status
    v_index = v_index + 1.
    wafieldcatlog-fieldname = 'STATUS'.
    wafieldcatlog-tabname = 'IT_ALV'.
    wafieldcatlog-seltext = 'Register Entry Status'.
    wafieldcatlog-reptext = 'Register Entry Status'.
    wafieldcatlog-hotspot = ' '.
    wafieldcatlog-col_pos = v_index.
    append wafieldcatlog to it_fieldcatalog.
    clear wafieldcatlog-reptext.
    clear wafieldcatlog-key.
    *EQPT Serno 1 Value
    v_index = v_index + 1.
    wafieldcatlog-fieldname = 'SERNR'.
    wafieldcatlog-tabname = 'IT_ALV'.
    wafieldcatlog-seltext = 'Serial number'.
    wafieldcatlog-reptext = 'Serial number'.
    wafieldcatlog-hotspot = ' '.
    wafieldcatlog-col_pos = v_index.
    APPEND wafieldcatlog TO it_fieldcatalog.
    CLEAR wafieldcatlog-reptext.
    CLEAR wafieldcatlog-key.
    *EQPT Serno 2 Value
    v_index = v_index + 1.
    wafieldcatlog-fieldname = 'SERNR1'.
    wafieldcatlog-tabname = 'IT_ALV'.
    wafieldcatlog-seltext = 'Serial number'.
    wafieldcatlog-reptext = 'Serial number'.
    wafieldcatlog-hotspot = ' '.
    wafieldcatlog-col_pos = v_index.
    APPEND wafieldcatlog TO it_fieldcatalog.
    CLEAR wafieldcatlog-reptext.
    CLEAR wafieldcatlog-key.
    *EQPT Serno 3 Value
    v_index = v_index + 1.
    wafieldcatlog-fieldname = 'SERNR2'.
    wafieldcatlog-tabname = 'IT_ALV'.
    wafieldcatlog-seltext = 'Serial number'.
    wafieldcatlog-reptext = 'Serial number'.
    wafieldcatlog-hotspot = ' '.
    wafieldcatlog-col_pos = v_index.
    APPEND wafieldcatlog TO it_fieldcatalog.
    CLEAR wafieldcatlog-reptext.
    CLEAR wafieldcatlog-key.
    *EQPT Serno 4 Value
    v_index = v_index + 1.
    wafieldcatlog-fieldname = 'SERNR3'.
    wafieldcatlog-tabname = 'IT_ALV'.
    wafieldcatlog-seltext = 'Serial number'.
    wafieldcatlog-reptext = 'Serial number'.
    wafieldcatlog-hotspot = ' '.
    wafieldcatlog-col_pos = v_index.
    APPEND wafieldcatlog TO it_fieldcatalog.
    CLEAR wafieldcatlog-reptext.
    CLEAR wafieldcatlog-key.
    *EQPT Serno 5 Value
    v_index = v_index + 1.
    wafieldcatlog-fieldname = 'SERNR4'.
    wafieldcatlog-tabname = 'IT_ALV'.
    wafieldcatlog-seltext = 'Serial number'.
    wafieldcatlog-reptext = 'Serial number'.
    wafieldcatlog-hotspot = ' '.
    wafieldcatlog-col_pos = v_index.
    APPEND wafieldcatlog TO it_fieldcatalog.
    CLEAR wafieldcatlog-reptext.
    CLEAR wafieldcatlog-key.
    *EQPT Serno 6 Value
    v_index = v_index + 1.
    wafieldcatlog-fieldname = 'SERNR5'.
    wafieldcatlog-tabname = 'IT_ALV'.
    wafieldcatlog-seltext = 'Serial number'.
    wafieldcatlog-reptext = 'Serial number'.
    wafieldcatlog-hotspot = ' '.
    wafieldcatlog-col_pos = v_index.
    APPEND wafieldcatlog TO it_fieldcatalog.
    CLEAR wafieldcatlog-reptext.
    CLEAR wafieldcatlog-key.
    *EQPT Serno 7 Value
    v_index = v_index + 1.
    wafieldcatlog-fieldname = 'SERNR6'.
    wafieldcatlog-tabname = 'IT_ALV'.
    wafieldcatlog-seltext = 'Serial number'.
    wafieldcatlog-reptext = 'Serial number'.
    wafieldcatlog-hotspot = ' '.
    wafieldcatlog-col_pos = v_index.
    APPEND wafieldcatlog TO it_fieldcatalog.
    CLEAR wafieldcatlog-reptext.
    CLEAR wafieldcatlog-key.
    ENDFORM. " prepare_catalog
    *& Module USER_COMMAND_0100 INPUT
    text
    MODULE user_command_0100 INPUT.
    IF ok_code = 'EXIT'.
    CALL METHOD grid1->free.
    CALL METHOD cl_gui_cfw=>flush.
    leave program .
    LEAVE TO SCREEN 0.
    ENDIF.
    ENDMODULE. " USER_COMMAND_0100 INPUT
    *& Form call_migo
    text
    --> p1 text
    <-- p2 text
    FORM call_migo .
    CALL FUNCTION 'MIGO_DIALOG' "n547170
    EXPORTING "n547170
    i_action = 'A04' "n547170
    i_refdoc = 'R02' "n547170
    i_notree = 'X' "n547170
    i_no_auth_check = ' ' "n547170
    i_deadend = 'X' "n547170
    i_skip_first_screen = 'X' "n547170
    i_okcode = 'OK_GO' "n547170
    i_mblnr = wa_alv-mblnr "n547170
    i_mjahr = wa_alv-mjahr . "n547170
    ENDFORM. " call_migo

    Thanks,
    K.Kiran

  • Table PPFTTRIGG not getting populated

    Hi,
    I am in the process of solving an issue where some of service confirmations are locked. Some of the service confirmations are not getting sent from CRM to ECC system. If we run the program RSPPFPROCESS, it picks up the actions from table PPFTTRIGG and sends it. However all this works only if the table PPFTTRIGG gets populated with the actions. How does this table get populated? I have not found anything in the where used list of the table or in the BADIs.. Does the configuration in SPPFCADM have anything to do with it? Please help me.
    Edited by: NeenaJ on Dec 26, 2011 12:52 PM

    Hi,
       You are trying to pass too many fields for the structure (wwt_fields) .
       Look at the FM 'RFC_READ_TABLE' for 'RAISE DATA_BUFFER_EXCEEDED' you'll have an idea.
    Regards,
    Srini.

  • How is the table MCHB populated?

    Dear SDNers,
    Need your input on how the table MCHB gets populated?
    for ex. when i create material master mm01 and save, material gets created and an entry is made in master table.
    Similarly, how /what tcode is processed to update the table MCHB.
    I am looking for field CLABS, as to how this is getting populated.
    Effort by me:
    I looked at the where used list for the table mchb and was able to locate a standard report RM07KO01- Stock consistency check. In this there is an include RM07KOF4  which contains perform update_mchb.
    I am not able to locate the code as to where this table is getting values populated from.
    Am i being right in my search ? if not please guide me.
    Regards,
    SuryaD.

    Hi Surya,
    As Suhas said..
    It is being updated while any Goods Movement happens...
    There are various T-Codes for it..
    MIGO
    MB1A
    MB1B etc etc
    Hope it will solve your problem..
    Thanks & Regards
    ilesh 24x7
    ilesh Nandaniya

Maybe you are looking for