How apply cgi on Linksys router with safari

I'm having issues of setting preferences on a Linksys router with Safari and a Mac. Am I missing a setting on Safari to allow cgi?

I want to set how many users allowed on my small local network. I can use a different browser to accomplish this but would like to use Safari. From time to time I do maintenance on the router and need to access the router preferences. Also at this time trying to trouble shoot the router for not allowing PC's to show up on the network FInder, a completely different problem and off topic.

Similar Messages

How To Use Your Own Router with Out Loosing Verizon's FIOS Services

How to use your own router with Verizon’s FIOS Service
First, you need a basic understanding of how FIOS works but unfortunately there are two types of FIOS systems out there. All of the systems utilize a fiber optic cable to bring TV, phone and internet to your location over one optic cable. In addition these systems provide interactivity including widgets, remote DVR, movies on demand and so forth via an IP (Internet Protocol) signal. Your STB (Set Tip Box) requires both a video and IP signal. The IP signal is necessary for all of the aforementioned interactivity. The fiber cable terminates at the Optical Network Terminal or ONT for short. The ONT converts the optics into a digital signal that can be utilized by ones equipment. From the ONT your video, phone and internet are provided to the location. This is where things can differ as the internet signal can be provided via a coaxial (MoCA or Multimedia over Coax Alliance) or RJ45 Cat5 (Ethernet) cable. It is important to identify and understand the differences of these two setups. In my case I have my internet entering via Ethernet cable, which in my humble opinion makes things a heck of a lot easier.
How does one tell the difference? In most cases it’s rather simple; just look at the Verizon’s router WAN (Wide Area Network) Port. Does it have a RJ45 (Ethernet) or Coax (TV cable Cord) going to it? If the router’s WAN port doesn’t have a coaxial connector then one will need to convert the MoCA signal into a usable Ethernet signal that routers understand. The easiest way is to use Verizon’s router as a bridge. In this method the Verizon’s router simply converts the signal and passes it along to your own router. The challenge is to try to maintain the interactivity that FIOS TV provides. Because of this one needs to supply the IP routed signal back to the FIOS router. There are multiple methods for doing this and I would recommend investigates which one make the most sense.
In my particular case the IP signal was provided by Ethernet. Again there are various ways of installing one’s own router. The hardest is to utilize Verizon’s router as a bridge. This setup requires configuring Verizon’s router as a bridge and also creating a VLAN (Virtual Local Area Networks). In addition one needs to set up their own router so it will work with the various routing tables and networks. For me this is too complex for the average person and it can be difficult to trouble shoot if something goes wrong. Please consider that Verizon will not support utilizing third party routers.
The easier method is to request an Ethernet signal (if you don’t already have one) from their ONT. I would highly recommend getting your hands on a NIM or Network Interface Module. This device is used to convert Ethernet to Coaxial so it can be fed back to your STBs. These can be purchased online and Verizon technicians can be a valuable resource with these sorts of acquisition. At the very least they can point you to the right direction. Once you have a NIM the rest is rather simple.
Log into the current Verizon Router.
Located the router’s MAC address and copy it down.
Go to the port forwarding section and copy down the Applied Rules.
Example:
Network Computer/Device: 192.168.1.100:63145
Application & Ports Forward: Application UDP Any -> 6347
Note: There may be up to three entries for each one of your Set Top Boxes.
Look at your current device list, typically found on the home screen. Copy down your STB MAC and IP address.
Example:
IP-STB1
Connection Type: Ethernet
* IP Address: 192.168.1.100
IP Address Allocation: DHCP
*MAC Address:                07:73:fFe:ad:8b:3f
* Things you will need to write down
Go to the network section and look for the main Ethernet connection. Select this and then select more setting, typically found at the bottom. Release the current lease.
Remove the Verizon router
Install your router
Connect the NIM by plugging in an Ethernet from one of the routers LAN (Local Area Network) ports to your NIM. Then connect the coax cable, the same cable that was used by Verizon router.
Set you DHCP routing IP pool to accommodate Verizon’s STB IP’s (note their IP’s start at 192.168.1.100)
Go to DHCP section and reserve the STB IP’s by inserting the IP’s and MAC addresses. This shall ensure that nothing else utilizes the same IPs as the STBs thereby preventing IP address conflict.
Add the port forwards from Step 5 above.
Clone Verizon’s Mac Address utilizing the info from step 2
Finish setting up the router in typical fashion.
Unplug and re-plugin your STB’s and test functionality. It’s best to try using a widget or Movie on demand function.
Note: if the new router can net get an internet signal contact Verizon’s support and have them release the IP and reset the ONT.
EVERYTHING should be working at this point.

3 Go to the port forwarding section and copy down the Applied Rules.
Example:
Network Computer/Device: 192.168.1.100:63145
Application & Ports Forward: Application UDP Any -> 6347
Note: There may be up to three entries for each one of your Set Top Boxes.G
Your display obviously is not like mine as mine does not dosplay the port associated with the ip address
whatever, the STB's start at 192.168.1.100 and icement by 1 for each
the port addr's will be 63145 alo incrementing by 1
there is 1 entry for each in my pf list
however each ip addr also has a port entry starting at 35000 also incrementing by 1 for each ip addr
For some unknow reason these are duplicated e.g I appear to have 11 entries exaactly the same for each stb and as the fios services rules have no action switc there is nowhere to delete the extraneous garbage.
Why do you clone the mac addr??

How to setup the Linksys router E4200 DD-WRT for WVC54GCA

I don't know how to setup the Linksys router E4200 DD-WRT for WVC54GCA. The DD-WRT is very complcated. Please help!!!!! Also, I have used the TZO.com for the DDNS. Should I setup the DDNS for DD-WRT router??? I used the DDNS for my old model router before. Thanks.
Solved!
Go to Solution.

Hi majekho, that is best be answered by support from the developers at the DD-WRT forums.
The Search Function is your friend.... and Google too.
How to Secure your Network
How to Upgrade Routers Firmware
Setting-Up a Router with DSL Internet Service
Setting-Up a Router with Cable Internet Service
How to Hard Reset or 30/30/30 your Router

How can I view all images with Safari on my mac?

how can I view all images with Safari on my mac? When I go to pinterest or any stock photo site I can only see some of the images on my mac.

Please link to an example of a page you're having problems with. It should be accessible without a login.

How can i discover bonjour service with safari on IPAD?

How can i discover bonjour service with safari on IPAD?
I can use safari on MAC to discover bonjour service on network, but how can i do that with safari on IPAD?
Thanks a lot.

unfortunately, You cannot get bonjour on ipad. But however, you can get a program on the mac (assuming you have a mac) called printopia (http://www.ecamm.com/mac/printopia/) which will turn your printer in to AirPrint when the mac is on. it works very well all the instructions are on the website

Bad display when configuring my Linsys router with Safari

Hi,
I have a Linksys router (WRT54G v1.1 firmware 4.20.7) that I configure with my browser.
When I use Safari all popup menu have a bad display, something like:
"Capture(share.auto)Auto"
While the same popup from Firefox will give me the result:
"Auto"
Only.
This was working well before, I can't remember if it was a router update or a Safari update that make the changes, but with Safari 1.x it was OK for sure.
Any way to reset it to the default behavior? What settings need to be change in Safari to get the right result?
The major problem is that display is confused and lines are longer than normal, so that mean the display is fuzzy...

I just sent a feedback to Apple, hoping they will find and solved the problem here...

Using Linksys router with Time Capsule / Airtunes...

Hi,
Does anyone have any idea how I can use my old Linksys WRT54G wireless router with my Time Capsule in such a way that the WRT54G provides a b/g network and I can have my Time Capsule provide just 802.11n for the best possible speed?
I have the two connected via Ethernet (TC connected directly to my cable modem) but don't seem to be able to get things to work.
I know I must be on the edge of getting this to work but am obviously missing the final step...
Cheers in advance for any help you can give,
Adi :o)

go to this link:
http://discussions.apple.com/thread.jspa?messageID=6831703#6831703
than the link at the bottom of the page.
i just set this up this weekend - everything works perfectly.

Configuring Netgear WLAN-Router with Safari not possible

Hi,
I've got a problem with safari and my netgear router WGT624v2. In a fromer safari version it was possible to configure the router via the config-page. But with my current safari version it is not possible. I can logon, but to only thing I coud see is cryptic HTML-Code. Firefox isn't able, too. The only browser which could manage this is MS Internet Explorer.
Maybe this has something to do with active x? Could a former safari version handle active x, and the current could not?
Does anybody have the same problem?
regards
Benni

Hi Benni and Welcome to Apple Discussions ...
Could be possible Microsoft isn't supporting Active X to the latest Safari update?? Try the Support and FAQ's at the Netgear site:http://kbserver.netgear.com/downloads_support.asp
Carolyn
Message was edited by: Carolyn Samit

How to link to linksys router AC1900 together

Dears All,,
I have tow linksys router AC1900 and i run one of them at my home and because of the black wall( that prevent network through wall) i brought pther extender access point to expand the power but still facing weak coverage. So I went and bought other router same model but is it able to be link together to expand the coverage area.
Make sure i have only one access point of internet at home all what i can do connect to main one for expanding..
Please advice and help in such case, thank you all..

I think you are asking about how to cascade the two routers. See if this helps you out: Cascade Linksys Routers

Linksys router with only a wireless laptop?

Hi,
I'm going over to my folks tonight to set up their Linksys wireless router. They have DSL service and just a wireless enabled laptop. I understand the router will need to be connected to the laptop for initial setup. Once that setup is complete, will they then be able to disconnect the cable from the router to the laptop and use the laptop throughout their home? They do not have a desktop pc to permanently plug the router into. Will this be a problem?
Thanks for your help,
Jason

You should use a wired connection to configure the router initially simply because otherwise you may have difficulties connecting to the correct router wireless in the beginning if other people in the proximity run another Linksys router in default configuration. Thus it is highly recommended to use a wired connection although it is possible to configure the whole router without ever connecting a wired computer to it.
I think you must use a wired connection if want to use the setup program on the CD. But it is not mandatory to run the setup CD. Sometimes the program will not even be able to successfully configure the router.
You can always configure the whole router through the web configuration interface at http://192.168.1.1/ Again, for the initial configuration use a wired connection to configure the wireless network and to secure it.
Regardless how you do the initial setup, after the router works you don't need a desktop connected. You don't even need a computer if you just connect a wireless device like a WLAN VOIP phone or a Tivo or similar.

Linksys router with wep enabled

Hi,
Im trying to use WIFI on my touch with my network secured. I have entered the password and it is accepted however the touch says it cant find the server. When I de-activate the WEP security on my router everything works as advertised. I have no idea what to put in the following items in set up
HTTP Proxy
Server
Port (Http should be 80)
Auth
i have tried entering manual username and password as i would for earthlink and this didnt help. When in un-secured mode it didnt ask and everything worked. Help

Make sure that you type in the code, rather than your username. You should be able to find it on your Linksys router under a tab that says wireless security. Type in, in your internet browser's address bar: 192.168.1.1. That should bring up the interface for you router.
For WEP, you should have 128 bit encryption, which means that your passphrase should be 13 letters long. If you have to change this, the other devices in your network will have to be changed to reflect the new passphrase. You should also power off your router when you introduce a new device into your network.
Have you thought about using WPA or WPA2? Usually this works better than WEP which is not as secure.
Power off your iTouch by pressing the button at the top. Turn it on again and see if you can get access to your network.

Linksys router with cisco switch

Hello everyone,
Just wondering if i can connect a cisco switch to my linksys router. Any info will be helpful. Thanks.

Well, you should be more specific what info you need.
Your question is answered with: yes, you connect a cisco switch to a linksys router. You can connect pretty much any ethernet switch or hub to a linksys router.
Beyond that I don't know what you want to know and thus cannot really give you more info.

How to make JasperReports Server compatible with safari 5.1.7 version

Hi
My JasperReports Server - Pro is compatible with safari 4.0 browser and safari 5.0 browser but i want to make it compatible with safari 5.1.7 browser My jasperserver is having a proxy address like "abc.com" instead of localhost:8080/jasperserver-pro/login.html.
The problem is, Unable to login through Safari 5.1.7 browser, I guess facing a redirection problem. But i am able to log in with my actual address (localhost).
The above problem is only with safari 5.1.7 and is working perfectly with firefox, chrome, IE and safari 4.0 and safari 5.0.
I am sorry if this is not the right place to discuss the above issue.
Any help will be highly appreciated.
Thanks and Regards
Naveen

Hello,
Thanks for tip. I tried it but unfortunately it still needs 7.08 to work and I'm not sure why. Even worse is the automatic updater that runs just downloads 7.0. So a user downloads the update, then gets another error message saying they need an even newer version of reader. Very lame.
Plus, once you do get the 7.08 update and open the file you get no less than three pop ups about not saving the file, auto fill options, and one other I forget. Overall a very awkward way to view a very simple file.
I was hoping this would make it easier for customers to fill out a form but it looks like it will accomplish the opposite.

Linksys router with 2 different air port cards

I have a Pismo and a G3 iBook 500. Both have air port cards in them. The pismo is running 10.4 and the iBook is running 10.3. Neither of them are able to pick up my Linksys router. I have a Pc laptop, G4 eMac and a BW G3 tower that can all pick up the router just fine. The eMac and G3 are both running a USB network adapter. Any suggestions?
Also does the original base station need a card in it? I found an auction that says the card has been removed from the base.

Is your Linksys operating in an 802.11b compatible mode?
Also does the original base station need a card in it?
Yes

How to setup a Linksys router as WiFi network -- connecting to Actiontec

With horrible range using the Fios Actiontec router, I went ahead with google searched suggestion to use a second router as my WiFi network. Unfortunately, I can't figure out how to properly set up the second router to the Actiontec even with step-by-step instructions.
Can anyone give me step by step instructions to get the second router up and running? Please help!
I wish to set up my second router as a new static connection so my WiFi devices may connect to that network instead of the Actiontec's. I do have Fios TV, so I need a solution that will not interrupt the other services.
I used this set of instructions:
http://smallbusiness.chron.com/set-up-second-router-verizon-fios-60493.html
I put the starting IP as 192.68.1.3
I got up to the input New Static Connection and input 192.68.1.2 and the MAC address of the new router.
When I press Apply, I get the message,"The IP address 192.68.1.2 is illegal for any of the connections subnets." The first time it failed, it stated that the address was used, but now I get this message every time.
I also attempted this set of instructions:
http://www.ehow.com/how_6127815_set-second-router-verizon-fios.html
But I only got up to #6 where I connect to the new router and enter admin. I was unable to access the new router. My browser states that there is no internet connection.
Note: Verizon support has been no help so far. I am at wit's end.

These are the instructions I would use
Can I use my wireless or an extra router along with the Verizon provided router?

How apply cgi on Linksys router with safari

Similar Messages

Maybe you are looking for