How apply multiple patches on oracle database at once?
Hi,
I setup a new server and I setup the Metalink Patch Setup, to bring the database up to date after 10.2.0.4 patchset.
I see that the cache shows 157 patches available.
Is there a way to schedule an all in one job to apply the pacthes at once? As I can see, the whole process could take a long time.
I could schedule jobs and leave there to work, is this the only option?
Thanks
Fabio D'Alfonso
I am not sure where the 157 number comes from but the Oracle quarterly CPU patch sets are cumulative so if you apply the most recent you should get most of the patches in a single user action.
I would not attempt to apply any patches not included in the most recent quaterly patch release unless I hit a bug that has a patch for it. That is, do not apply what you do not need. Wait to pick up any additional avaialble patches with the next quarterly patch set since one-off patches sometimes have side effects and the more time that goes by after the one-off patch release the better from a reliability point of view.
HTH -- Mark D Powell --
Similar Messages
-
How to add patch in Oracle Payable under Linux
Hi All
I want to know how to apply a patch in Oracle under Linux environment. The problem is that I'm a Newbie in Oracle and i'm not a DBA and also i have little knowledge in Linux environment.
Apps: 11.5.9
OS: Linux x86
Patch : 7309767
Thanks
Edited by: 883454 on Sep 6, 2011 5:07 PMWrong category forum.
-
Applying interim patches to Oracle 10.2.0.2
Hi,
After the CRM upgrade to CRM 2007 on oracle 10.2.0.2 on soalris 10, I need to apply interim patches to oracle 10.2.0.2.
As I am new to it, please any one send me the step by step procedure to do so. I have already taken a backup.
Regards
M KumarHi,
You should read the notes, all is explained on them.
First you MUST download all the patches from SAP note 871096
Then you also read the note, where is explained how to install the patches:
Patch installation with OPatch
To install Oracle patches for Oracle Release 10.2.0.2 or 10.2.0.4, use
the Opatch version of patch 4898608 only. This is available on SAP
Service Marketplace.
The use of the OPatch version of patch 6880880 (particularly in
connection with MOPatch) is currently not released.
In this case, see OPatch Note 839182.
Patch installation with MOPatch
You must apply a relatively large number of patches for Oracle Release
10.2.0.2. Information about the patch installation using MOPatch, see
Note 1027012.
Of course, this little excerpt of the note point to other notes that you should read to get more details. -
How do I get from Oracle Database 8.1.7.0.0 to 8.1.7.2? There is a patchset that fixes a bug in 8.1.7 for memory leaks that I need installed. I am currently running on a WindowsNT Server with a Oracle Database version of 8.1.7.0.0. Is going to 8.1.7.2 a complete release upgrade, or is there a smaller upgrade to get there, and how do I get the files required>
Thanks,Hi,
Sorry for my english
For Windows NT, the last big patchset is 8.1.7.4.x. I advice you to use the last patchset. A patchet is not a upgrade or a migrate. the installation is in two phase. Phase One:Patch the files in the oracle home with Oracle Universal Installer (Oui) and Phase Two: execute sql files on the dictionnary of each database. There is a readme with the patch.
you can get files on metalink if you have a account (metalink.oracle.com).
List bug for Memory Corruption
8174 1748759 Client memory corruption / dump (eg: in ttcfopr) using pre-fetch
8174 1859905 Intermittent dump / client memory corruption
8174 1964934 Memory corruption possible using INSERT /*+ APPEND */ over DBLINK
8174 2126096 Session heap corruption from LIKE :bind ESCAPE '/' if :bind ends in the escape character
8174 2152752 Memory corruption / OERI:17182 possible fetching CHAR from DB2 over HS
8174 2217159 13 byte PGA corruption possible using SQL over DBLINKS from PLSQL with MTS to V7 database
8174 2248904 Memory corrupt possible during optimization of distributed query
8173 1836101+ Memory Corruption from distributed query / query with binds (OERI:17114/17xxx/dump in kkecdn/kgh*/kke*)
8173 1542218 Heap corruption (OERI:17182/dump in kghfrf) using very large collections
8173 1661786 OERI:12261 / single byte memory corruption possible for CALL type triggers
8173 1711803 DBW & users may CRASH under heavy load on multi-CPU system with FAST_START_IO_TARGET set > 0
8173 1744786 Cursor work heap corruption from CONNECT BY PRIOR
8173 1752554 OERI:17182 selecting DB2 DATA TYPE of CHAR over HS
8173 1791258 CONNECT BY on IOT can cause SGA memory corruption
8173 1810829 Lightwieght sessions (via proxy connect) may dump / corrupt shadow memory if users have >1 ROLE
8173 1847583 Client memory corruption/dump using large value_sz for OCIDefineByPos with OCI_DYNAMIC_FETCH
8173 1968635 OERI:KCOAPL_BLKCHK / buffer cache corruption from CR rollback
8173 1987654 Compiling a PLSQL block with an INDICATOR clause can corrupt memory
8173 1995026 OERI:17112 / heap corruption from Oracle Trace with MTS & Large Pool
8173 2002799 Wrong results / heap corruption from PQ with aggregates in inline view
8173 2048336 OERI:150 / Memory corruption from interrupted STAR TRANSFORMATION
8173 2065386 Mem. Corruption / OERI:KGHFRE2 / OERI:17172 possible using bitmap indexes
8172 1365873 OERI:17182 / CGA corruption with CURSOR_SHARING=FORCE
8172 1373920 Memory corruption from PLSQL ORA-6502 errors
8172 1447610 DBMS_SQL.BIND_ARRAY may dump / report private memory corruption type errors
8172 1679690 Buffer cache in memory corruption (OERI:2032) can lead to permanent data/index mismatch (OERI:12700)
8172 1732885 oeri:[KDIBR2R2R BITMAP] / memory corruption possible from BITMAP AND
8172 1763408 RPC between 9i <-> 8i with CHAR data can corrupt memory
8171 1227384 SGA heap corruption using DBMS_SQL under heavy load (Rare)
8171 1364542 Buffer Cache corruption possible (rare)
8171 1394565 PROBE: Callheap corruption printing a RAW in PLSQL debugger
Bye !!!
Cordialement
XsTiaN -
How do I tune an Oracle database running RequestCenter?
How do I tune an Oracle database running RequestCenter?
The details in the following discussion apply to RequestCenter/AlignmentCenter versions 2006 and prior.
For most efficient operation of ServiceManger, several of the RequestCenter tables must have statistics collected which include histograms. You can use the SQL commands below to collect the required statistics:
ANALYZE TABLE TxActivity COMPUTE STATISTICS
FOR COLUMNS StateID SIZE 45;
ANALYZE TABLE TxActivity COMPUTE STATISTICS
FOR COLUMNS PerformerShared, IsBusy, TicketObjectID SIZE 2;
ANALYZE TABLE TxActivity COMPUTE STATISTICS
FOR COLUMNS Waiting, FlagID, EscalationLevel SIZE 3;
ANALYZE TABLE TxActivity COMPUTE STATISTICS
FOR COLUMNS PerformerOfficeID SIZE 75;
ANALYZE TABLE TxActivity COMPUTE STATISTICS
FOR COLUMNS PerformerID SIZE 185;
ANALYZE TABLE TxActivity COMPUTE STATISTICS
FOR COLUMNS CustomerID SIZE 200;
ANALYZE TABLE TxActivity COMPUTE STATISTICS
FOR COLUMNS ActivityFormID, ActivityTypeID SIZE 3;
ANALYZE TABLE TxActivity COMPUTE STATISTICS
FOR COLUMNS ClientOUID SIZE 45;
ANALYZE TABLE TxActivity COMPUTE STATISTICS
FOR COLUMNS NextActionID SIZE 6;
ANALYZE TABLE TxProcess COMPUTE STATISTICS
FOR COLUMNS TicketObjectID, EscalationLevel SIZE 3;
ANALYZE TABLE TxRequisition COMPUTE STATISTICS
FOR COLUMNS BeingProcessed SIZE 2;
ANALYZE TABLE TxRequisition COMPUTE STATISTICS
FOR COLUMNS OrganizationalUnitID SIZE 16;
ANALYZE TABLE TxRequisition COMPUTE STATISTICS
FOR COLUMNS StatusID SIZE 6;
ANALYZE TABLE TxRequisitionEntry COMPUTE STATISTICS
FOR COLUMNS ServiceID SIZE 32;
ANALYZE TABLE TxRequisitionEntry COMPUTE STATISTICS
FOR COLUMNS StatusID SIZE 6;
ANALYZE TABLE DirPerson COMPUTE STATISTICS
FOR COLUMNS isOffice SIZE 2;
ANALYZE TABLE DirPerson COMPUTE STATISTICS
FOR COLUMNS IsInactive SIZE 2;
ANALYZE TABLE DirPerson COMPUTE STATISTICS
FOR COLUMNS TimeZoneID SIZE 6;
ANALYZE TABLE DirPerson COMPUTE STATISTICS
FOR COLUMNS SupervisorID SIZE 3;
ANALYZE TABLE DirPermission[LW1] COMPUTE STATISTICS
FOR COLUMNS TargetObjectID SIZE 12;
ANALYZE TABLE DirPermission COMPUTE STATISTICS
FOR COLUMNS OwnerObjectID SIZE 4;
ANALYZE TABLE DirOrganizationalUnit COMPUTE STATISTICS
FOR COLUMNS OrganizationalUnitTypeID SIZE 4;
ANALYZE TABLE DefJavascript COMPUTE STATISTICS
FOR COLUMNS IsGlobalOnLoad, IsGlobalOnSubmit, IsGlobalOnUnload
SIZE 2;
ANALYZE TABLE UIEntry COMPUTE STATISTICS
FOR COLUMNS ObjectID SIZE 7;
ANALYZE TABLE UIEntry COMPUTE STATISTICS
FOR COLUMNS UserInterfaceID SIZE 16;I thought there will be a magic switch to turn it off and on!That is how Oracle has been since I can remember. You get what you ask for. Does that sound bad?
Would you want:
IF ('ABC' = 'Abc')to evaluate to TRUE or FALSE?
The behaviour seems to be correct. In cases where you want the comparision to be case insensitive, you have several ways to do it. You do it exactly where you need it, not everywhere and all the places.
The default behaviour would potentially give you one row where as making it case insensitive could potentially give you several rows. now you need to pick one, which one?
http://asktom.oracle.com/pls/ask/f?p=4950:8:::::F4950_P8_DISPLAYID:1560806455855#6467925371258 -
Applying security patch to Oracle 10G on Linux
Hello,
I'm new to Oracle DBA world, need to apply security patch to Oracle 10G on Linux server, any tips and notes would be appreciated.
thanks
SamManish,
1. I have to upgrade the database version from 10.2.0.2 to 10.2.0.4 on Linux, Is there any proper documentation which will help me out?Please refer to the following document.
Note: 454750.1 - Oracle Apps Release 12 with Oracle Database 10.2.0 interoperability notes
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=454750.1
2. What are the types of oracle database patches? what is the proper procedure to apply those kind of patches to Oracle 10g on Linux?
Most of the patches in this upgrade are database patches (which should be applied using opatch). The main upgrade patch (Patch 6810189 - 10.2.0.4 patch set) should be applied using Oracle Universal Installer (runInstaller).
Always follow the steps in the patch README file before applying any patch.
Regards,
Hussein -
Hi all,
When patching an Oracle database, the parameters have to fit perfectly, i.e version, platform, O.S, etc. For me currently the version is on Suse Linux 9, and 10gR2 (10.2.0.1.0). However a lot of recent CPU's don't have that version listed as one to patch, on that O.S. Does that mean I can't apply CPU's? Or does it mean that I can not upgrade the version to say 10.2.0.3.0?
Regards, David.> Does that mean I can't apply CPU's?
Mostly CPUs are Version oriented so in your case you may not need
does it mean that I can not upgrade the version to say 10.2.0.3.0? No you can upgrade thats different ..CPU is different from patching/upgrading and no link beteen them -
How to extract data from oracle database directly in to bi7.0 (net weaver)
how to extract data from oracle database directly in to bi7.0 (net weaver)? is it something do with EDI? can anybody explain me in detail?
Thanks
YorkYou can use UDConnect to get from Oracle database in to BW
<b>Data Transfer with UD Connect -</b>
http://help.sap.com/saphelp_nw04/helpdata/en/78/ef1441a509064abee6ffd6f38278fd/content.htm
<b>Prerequisites</b>
You have installed the SAP WAS J2EE Engine with BI Java components. You can find more information on this in the SAP BW installation guide on the SAP Service Marketplace at service.sap.com/instguides.
Hope it Helps
Chetan
@CP.. -
How to connect Java to oracle Database Express Edition?
Anyone can help me?
How to connect JAVA TO ORACLE DATABASE EXPRESS EDITION?I suggest you to read this article:
http://wiki.oracle.com/page/JDBC
Regards,
Ricky -
How to Send SMS from Oracle Database to Mobile
Hi All,
I need urgent help in how to send sms from oracle database to mobile
thanks and best regardsyou can use smslib..... . i have made a program with this. its working fine with oracle database.
see the links here ...
http://halimdba.blogspot.com/2011/08/send-sms-from-oracle-database-with.html
by the way, how you can say "urgent help" ?
regards
Halim -
Apply Patches on Oracle Database with Logical Standby Database
Here I am:
I got a primary database with a logical standby database running Oracle 11g. I got two client applications, one is the production site pointing to the primary one, another one is just a backup site pointing to the logical one.Things will only be written into the primary database every mid night and client applications can only query the database but not add, update nor delete.And now, I want to apply the latest patch on both of my databases. I am also the DNS administrator, I can make the name server pointing to the backup site instead of the production one.I want to firstly apply the patch on the logical one, and then the physical one.
I found some reference which explains how to apply patches by adopting "Rolling Upgrade Method". however, I want to avoid doing any "switch over" mentioned in the reference because I can make use of name server. Can I just apply patches as the following way?
1)Stop SQL apply
2)Apply patches on logical standby database
3)let the name server point to the backup site
4)Apply patches on the primary database
5)Start SQL apply
6)Let the name server point back to the production site
Thanks in advance.Pl follow the steps in MOS Doc 437276.1 ( Upgrading Oracle Database with a Logical Standby Database In Place )
HTH
Srini -
Apply Latest Security Patches on Oracle Database 10g Express Edition (XE) ?
Hi !
I have an Oracle Database 10g Express Edition (XE) version 10.2.0.1.0 running on a Microsoft Windows 2003 SP2 server.
I need to find and install the latest security patches on this database.
Can someone inform me where I can find these patches and the steps for installing these patches?
Thanks,
Kind Regards,
ShaileshHi,
Welcome 2 oracle forums :)
Can someone inform me where I can find these patches and the steps for installing these patches?U can find all the latest security and all available patches on https://support.oracle.com/CSP/ --> Patches and updates tab
Regards,
X A H E E R -
Error importing with impdp after applying a patch for oracle 11g
Hello guys,
I recently unistalled all the oracle software with my database in order to start all fresh. I then installed the database and applied a patch from the version 11.1.0.6.0 to 11.1.0.7. I used the DBUA to do such a thing and it worked wonderfully.
I'm now trying to do a full import but it seems there's something wrong with the connection. Below is the syntax and am using Windows 7 BTW.
C:\>impdp \"sys/2learn@practicante as sysdba\" full=y DIRECTORY=export DUMPFILE=expdp.sgtc.01052012.dmp logfile=impdpPRACTICANTE.log
Import: Release 11.1.0.7.0 - Production on Lunes, 07 Mayo, 2012 15:20:55
Copyright (c) 2003, 2007, Oracle. All rights reserved.
UDI-12154: la operaci¾n ha generado un error ORACLE 12154
ORA-12154: TNS:no se ha podido resolver el identificador de conexión especificado
C:\>
Thanks!Thanks for the reply!
You may be right about not using the sysdba to logon but just changed it...am still having the same issue though.
SQL> ALTER USER scott IDENTIFIED BY tiger ACCOUNT UNLOCK;
Usuario modificado.
SQL> GRANT READ, WRITE ON DIRECTORY export TO scott;
Concesión terminada correctamente.
SQL> connect scott;
Introduzca la contraseña:
Conectado.
C:\>impdp scott/tiger@practicante full=y DIRECTORY=export DUMPFILE=expdp.sgtc.01052012.dmp logfile=impdpPRACTICANTE.log
Import: Release 11.1.0.7.0 - Production on Lunes, 07 Mayo, 2012 16:05:23
Copyright (c) 2003, 2007, Oracle. All rights reserved.
UDI-12154: la operación ha generado un error ORACLE 12154
ORA-12154: TNS:no se ha podido resolver el identificador de conexi¾n especificado
C:\>type D:\Oracle2practice\NETWORK\ADMIN\tnsnames.ora
# tnsnames.ora Network Configuration File: D:\Oracle2practice\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
PRACTICA.cre.com.bo =
(DESCRIPTION =
(ADDRESS_LIST=
(ADDRESS = (PROTOCOL = TCP)(HOST = GGTPRACTICANTE.cre.com.bo)(PORT = 15
21))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = practicante)
C:\>sqlplus scott/tiger@practicante
SQL*Plus: Release 11.1.0.7.0 - Production on Lun May 7 16:57:30 2012
Copyright (c) 1982, 2008, Oracle. All rights reserved.
ERROR:
ORA-12154: TNS:no se ha podido resolver el identificador de conexi¾n
especificado
C:\>tnsping fubar
TNS Ping Utility for 32-bit Windows: Version 11.1.0.7.0 - Production on 07-MAY-2012 17:00:16
Copyright (c) 1997, 2008, Oracle. All rights reserved.
Archivos de parßmetros utilizados:
D:\Oracle2practice\network\admin\sqlnet.ora
TNS-03505: Fallo al resolver el nombre
C:\>sqlplus scott/P@ssW0rde@practicante
SQL*Plus: Release 11.1.0.7.0 - Production on Lun May 7 17:14:49 2012
Copyright (c) 1982, 2008, Oracle. All rights reserved.
ERROR:
ORA-12154: TNS:no se ha podido resolver el identificador de conexi¾n especificado
I tried to fix the error but it is still there...any other way that could help or is there anything wrong with what I have done so far? -
HOW DO YOU CONVET AN ORACLE DATABASE FILE TO A TXT FILE?
Is there a way in a program unit of a form to convert an ORACLE database file into TXT format? When the file gets created, I want to use the text file in a distribution list for sending email. My code in the program unit is:
Insert into THE_IMO_EMAIL
Select distinct imo_email from DS_POC
where imo_email is not null;
commit;
Table THE_IMO_EMAIL is a temporary table. The temporary table gets deleted everytime before records get inserted into it. There is only 1 item in the temporary table.
IMO_EMAIL VARCHAR2(55)
After the COMMIT I want to copy the contents out of the
THE_IMO_EMAIL into a TXT File.
How do I do this? What parameters do I need to use? Should I do this in another program unit?can you be more clear on this
"DATABASE FILE" what is this? an RDBMS file and you need this in ASCII format. I am lost. -
How can we clone the Oracle database in new Oracle Home
Hi,
I would like to clone oracle database into new oracle home. How can we set it using OEM.
I am using 10g grid control. Target db is on solaris
Thanks
Naveenafter logging into target database, under maintenance tab, data movement header; ther is "clone database" option. When you click on it; you'll see :
Clone Database uses RMAN to duplicate a database from:
-- An open database in ARCHIVELOG mode, or
-- An open database in NOARCHIVELOG mode (restart required), or
-- A saved working directory from previous cloning
Clone Database performs the following operations:
-- Backup each database file and store it in a working directory
-- Transfer each backup file from source to destination host
-- Restore each backup file to existing destination Oracle Home
-- Recover the cloned database with saved archived log files
-- Open the cloned database with resetlogs
It seems to be for cloning to a different host, but i guess you can chose the same host for source and destination. (I've never used cloning on em by the way :))
But firstly, you should create a new oracle home, you can simply copy your oracle home with a new name (cp -R /oracle/app/oracle/product/10.2.0 /oracle/app/oracle/product/10.2.0.new) or make a new installation.
I suggest you to do this cloning with CLI. You should take a full backup with RMAN, copy the oracle home, create a new initNEWSID.ora file and nomount the database, restore (or simply copy) controlfiles, restore database (with set newname commands), recover database, open resetlogs.
Maybe you are looking for
-
How can I remove an iPhone from my apple account
How can I remove an iPhone from my apple account
-
Need samples how to use classes in WebDynpro
Hi, I Need To simple Samples how to use classes in WebDynpro. Regards
-
Hi, We are in 4.6c and IS media integarting with PS module. Can anyone tell me how to delete the Business Partner "Role" in IS media module. I found in ECC60, but not in 4.6c. Thanks a lot in advance. Krishna Reddy Edited by: krishna.gujju on May 28,
-
I purchased ringtones from the itunes store on my iPhone 4S, and when i came home and synced my phone to my computer i noticed these ringtones were duplicated in my phone. I am not manually managing music, nor are there duplicates of any tone in my l
-
All my photos are gone even though i backed them up to icloud??
hi, i am no apple genius so i need help... i had a iPhone 4s worked fine. downloaded ios6, completely corrupted it kept crashing etc, took it to the apple shop he gave me a new iphone but with ios5.1.1 and "set it up" with it putting all my pictures