How are BSIS and COEP linked?

Is there a link between BSIS and COEP tables?
Any reference doc number can be populated from COEP to BSIS automatically?
My requirement is to find how the BSIS-XBLNR can be linked to COEP?
pl advise.
Ven

To put my question in a better way,
when I enter a document with FB50, it generates controlling docs and also populates the FI doc number in the reference field of COEP.
When I post a document with KB21N, it does generate the FI docs but does not populate the reference doc field.
I need to find how is FB50 behaving. I tried to do a debug but not of much help.
- Ven

Similar Messages

  • How are attribute and text master data tables linked in SAP R/3?

    Hello,
    how are attribute and text master data tables linked in SAP R/3?
    Most tables with attribute master data like T001 for company codes,
    have a text master data table T001T (add "T" to table name).
    When looking at the content of table T001 via transaction se11,
    the text are automatically joined.
    But for some tables there is no "T"-table (e.g. table TVBUR for sales offices
    has no text table TVBURT), but in se11 you get texts. There is an address
    link in TVBUR, but the Name1, etc. are empty.
    a) Where are the text stored?
    b) How does the system know of the link?
    Hope someone can help!
    Best regards
    Thomas

    Hi Thomas
    The master and text table are not linked by name, of course, if you see the text table, it has the same key fields of master table, only it has the field key spras and the field for description.
    The link beetween the tables is done by foreign key: if you check the text table TVKBT u need to see how the foreign key for field VKBUR is done:
    -> Foreing key with table TVBUR
    -> Foreing key field type -> KEY FIELD FOR A TEXT TABLE
    ->Cardinality-> 1-:CN
    It's very important the attribute sets for Foreing key field type, if it's KEY FIELD FOR A TEXT TABLE, it'll mean the table is a text table: i.e. that mean the master table is a check table for the text table, where the foreign key type is for text table.
    U can find out the text table of master table by SE11: GoTo->Text Table
    U can fined some information in table DD08L.
    Max

  • How are contract and service order related....urgent

    Hi all
    I am ABAP consultant...
    I am working on Service contract Cost Management threshold alert report...
    I want clear idea as to how are contract and service order related....
    BAsed on contract type and contract start and ,end date,sold to party....
    i need to get contract ,item , service order no: , and i have to calculate <b>INTERNAL ,EXTERNAL LABOUR, INTERNAL,EXTERNAL material COST</b>
    plz help me out...
    Thanks in advance,
    Madhavi.

    Dear Madhavi,
    http://www.erpgenie.com/abap/tables_sd.htm
    VBFA Sales Document Flow
    KONV Conditions for Transaction Data
    KONP Conditions for Items
    LIKP Delivery Header Data
    LIPS Delivery: Item data
    VBAK Sales Document: Header Data
    VBAP Sales Document: Item Data
    VBBE Sales Requirements: Individual Records
    VBEH Schedule line history
    VBEP Sales Document: Schedule Line Data
    VBLB Sales document: Release order data
    VBLK SD Document: Delivery Note Header
    VBPA Sales Document: Partner
    VBRK Billing: Header Data
    VBRP Billing: Item Data
    VBUK Sales Document: Header Status and Administrative Data
    VBUP Sales Document: Item Status
    VEKP Handling Unit - Header Table
    VEPO Packing: Handling Unit Item (Contents)
    VEPVG Delivery Due Index
    Also, go through:
    http://www.erpgenie.com/abap/tables.htm
    Regards,
    Naveen.

  • How are Aperture and Yosemite getting along so far?

    How are Aperture and Yosemite getting along so far?
    Hi guys,
    Is it OK for Aperture users to take the plunge and update to Yosemite, or is it wiser to wait for kinks to be worked out first? I didn't find any reference to this matter so far on this forum or on the web. I may have mort worded it correctly.
    Thanks for responding,
    Raphael
    Also,
    Why do I constantly run into the statement: "You are not allowed to create or update this content" when I click on "Post"? So annoying ....

    Aperture 3.6 and Yosemite have been a nightmare for me unfortunately.  Every time I try to open it since updating to Yosemite it quits unexpectedly within 5 seconds or less.  I've tried repairing and rebuilding the library but that did not help.  Just get the below message.
    Process:               Aperture [11391]
    Path:                  /Applications/Aperture.app/Contents/MacOS/Aperture
    Identifier:            com.apple.Aperture
    Version:               3.6 (3.6)
    Build Info:            Aperture-500021000000000~3
    App Item ID:           408981426
    App External ID:       731142774
    Code Type:             X86-64 (Native)
    Parent Process:        ??? [1]
    Responsible:           Aperture [11391]
    User ID:               501
    Date/Time:             2014-10-20 22:06:19.726 -0400
    OS Version:            Mac OS X 10.10 (14A388b)
    Report Version:        11
    Anonymous UUID:        554987CC-A5F5-9C57-2520-D55ECD699D4A
    Time Awake Since Boot: 350000 seconds
    Crashed Thread:        8
    Exception Type:        EXC_ARITHMETIC (SIGFPE)
    Exception Codes:       EXC_I386_DIV (divide by zero)

  • "How are local and state taxes setup/updated when employee's address change

    Hi All
    I wanted to know "How are local and state taxes setup/updated when employee's address changes . - How is it done in SAP? -
    Thanks in Advance

    This defeats the purpose of trying to centralize SAP-related web resources on the SAP server. Typically IIS/Apache or other non-SAP servers are under the control of IT and not the SAP BASIS group.
    We simply would like to have a centralized location to store static web files so that they are not overwritten during Portal support pack applications.

  • How are objects and values passed in rmi?

    how are objects and values passed in rmi?

    In java there are two mwthods of passing aruguments and returning results.
    1) by value
    2) by reference.
    While invoking local methods, java passes primitive types by value and objects by reference.
    However while invoking remote methods both these data types are passed by value. Except for the objects being exported. Reason being two different JVM's are involved and thus memory addresses references of one are meaningles for the other. However "pass by value" for values of type object are implemented as deep copy.

  • How are attributes and texts for a master data linked and targeted to ...?

    Our previous consultants used to load data to master data 0MATL_GROUP. 
    1. RSA1 -> InfoProvider -> Select 0MATL_GROUP or 0MATL_GROUP___T
    Check these above two and find the records loaded are both 1,216 for Language EN.
    We check the data flow of this master data (0MATL_GROUP or 0MATL_GROUP___T) and find there are four branches which target 0MATL_GROUP:
    branch 1: 0MATL_GROUP is itself an InfoSource and the datasource is 0PROD_CATEG_R3_MAP_ATTR.  However under this datasource, there is no any InfoPackage, i.e., the system doesn't load data to 0MATL_GROUP through this branch.
    branch 2: Through InfoSource 0MATERIAL_ATTR.  However the InfoPackage under this InfoSource target data load to 0MATERIAL but not 0MATL_GROUP, i.e., the system doesn't load data to 0MATL_GROUP through this branch.
    branch 3: Through InfoSource ZMATL_GROUP_ATTR and it's corresponding datasource Z_MAT_GROUP_ATTR.  InfoPackage monitor shows the data load record for this datasource is 490 (Run RSA3 on R3 for this datasource also gives the same record count).
    branch 4: Through InfoSource 0MATL_GROUP_TEXT and it's corresponding datasource has the same name. InfoPackage monitor shows the data load record for this datasource is 1190 for Language EN (RSA3 on R3 for this datasource gives the same count for language EN).
    2. InfoObj. 0MATL_GROUP
    1). Master data tab (/BI0/PMATL_GROUP): 526
    2). Text table (/BI0/TMATL_GROUP):
    1657 (includes both EN and other lan-guages), for EN: 1190.
    3. Check R3 Table T023T (Material Group Descrip-tions) for EN: 1190.
    Our questions are:
    1. The InfoProvider 0MATL_GROUP and 0MATL_GROUP___T
    both have counts of 1,216 for Language EN.  And for the four branches in the data flow, only 3rd and 4th branches feed data to it.  3rd branch (datasource Z_MAT_GROUP_ATTR) feed count is 490 and 4th branch (datasource 0MATL_GROUP_TEXT) feed count is 1190 for Language EN. We wonder how attribute and text data are corelated to each other and with it's master data.  Obviously 1,216 is not equal to the sum of 1190 and 490, the how 1190 (text) and 490 (attribute) constitute the master data count 1,216?
    2. Do we have to use 1st and 2nd branches to feed data to 0MATL_GROUP?
    3. How InfoObj. 0MATL_GROUP Master data tab (/BI0/PMATL_GROUP) shows the count is 526?  it should be 490 from the custom datasource Z_MAT_GROUP_ATTR, right? But why the count is different?
    We would be appreciated any expert input!

    Kevin,
    can you check the data in Material Group charecterstic againest R/3. One moe thing check how these 4 branches Mapped to material Group?
    Take the for Attributes it should be 490. it is 525. try to analyse what are the extra records comparing with Source. take the you found so and so meterial group extra then analyze from where is it getting extracted to BW i mean which DS.. (either branch 1 or brach 2 or branch 3 or 4). then check in R/3 side DS for the 4 branches. then you will know what exactly happening.
    Analyze the data from step by step from r/3 to BW for each level. You will get clue.
    Nagesh.
    Message was edited by: Nagesh Ganisetti

  • Urgent: BSIS and MSEG link

    Hello,
    I cannot get the material number of the GR line in FI documents.
    I am using the tables BSIS and BSAS but cannot find any material number associated with them.
    BSEG is an option but it is giving time-out dump when data of more than 10 days are selected.
    Any suggestions will be appreciated.
    Regards,
    Sukriti

    Hi Sukriti,
    Never use BSEG or MSEG directly to fetch data as they always have huge data and it takes lot of time to fetch data.
    the link between BSIS and MSEG is as follows.
    BSIS-BELNR = MSEG-BELNR
    BSIS-GJAHR = MSEG-GJAHR
    BSIS-BUZEI   = MSEG-BUZEI
    BSIS-BUKRS = MSEG-BUKRS
    and filter in where condition based on MSEG-MATNR = materials from Select option or Parameters.
    May be you can create an index with the above 4 fields and also BSIS-HKONT in BSIS table.
    This would definitely give you the exact number of entries as in BSIS and MSEG.
    You can notice that in MSEG the Fields are not Key fields but they will give you unique entries.
    So you should be using join for BSIS and MSEG tables on the above 4 fields.
    hope this will solve your problem.
    If useful please dow reward
    Thanks
    Venugopal

  • I have a new MacBook. I want to put my iTunes  on it that I previously bought. The solution is to authorise the Mac by going on the Store and authorising it. I press the store link and all I get are products and no link for authorisation?

    I have a new mac Book. I want to put my previously purchased itunes on it. The support page says to authorise the new Mac by going into the itunes store and then authorise. I click on store and all I get are products with no link. Can someone advise where the authroisation link is please?

    I don't know why but after about an hour the tool bar you rferred to came on its self jsut as the support solution and you have advised and it is now working, but the toolbar just disappears and that is why I could not find the link or correct store link. Weird! But thanks, Gordon

  • All of a sudden my yahoo email wont display correctly (shows some links for inbox etc but they arnt clickable and no emails are displayed) and the links on facebook (notifications, home etc) dont display but facebook content does.

    Yahoo home page and yahoo email is not displaying correctly. It had been working fine until Saturday 9/10. When i load yahoo home page it will display content but some is not clickable and is not displayed correctly. In my email it will show the content on the left side (inbox, drafts etc and along the top (contacts, inbox etc) nothing can be clicked and no emails load or are shown. Facebook will load news feed content but will not display the icons at the left top (notifications, messages etc) they are clickable and work but the images just aren't there. Also not able to play games in facebook. The game loads up to 100% but never finishes. I dont go to many other website but i did check a few and they seem to be fine. May this be a website issue or firefox issue? i am able to use internet explorer to correctly see my email and facebook so assuming its a firefox thing.

    Hi
    Welcome, glad you got some benefit from the threads, it all so easy once you've done it a few times, aint it.
    Glad your going well, now you can help others  
    you could also join the folding team and help medical research.
    enjoy
    cheers
    jocko

  • How are embedded and linked images printed

    Hi
    I have an illustrtor documcnet which is one quater of the size it will be printed at (50 * 12.5 cm up to 2 * 0.5 m).
    It is at one quater on request of the company printing the banner.
    It has a high res texture image (embedded) on the babk layer and the rest is all vectors.
    When the image is printed (and scaled up 400% in the process) will the high res image be printed at the highest resolution available?
    If not is there an easy way to scale my artboard guides, all objects and effects up by 400%.
    Thanks in advance,
    Simon

    When the image is printed (and scaled up 400% in the process) will the high res image be printed at the highest resolution available?
    It will be printed at its effective resolution after being scaled. In other words, when scaled to 400% its PPI will be one quarter of what it is currently. If you want 50 PPI at full size and are drawing at 25%, then you want the raster image to be 200 PPI at the 25% scale in which you are drawing.
    JET

  • I give up - how are parent/child .chm links maintained?

    I've been following the letter of the law (help) for three versions now - RH6, RH7, and now RH8 - and I give up.
    What is the magical mystery proper way of maintaining parent/child .chm links in RH8???
    Current issue: Since converting projects to RH8, when searching in Help the "Location" display for results reverted to older project names - e.g. "Product08" instead of just "Product", or "Installing Product" instead of "Product Install". I finally tracked this down to the Project Settings, which apparently retains the original name of the project file even after the actual project files and .chms were renamed.
    The issue is that after updating these settings, recompiling the child projects and then the parent project, the changes are not showing up, and it seems like 4-5 times a year I have to fight RoboHelp to properly show children projects - I'm constantly encountering missing links, failure to display updated content, doubled search results, empty Index files, etc etc etc. Always seemingly triggered by one simple change here or there, without rhyme or reason. I have followed the RH help file instructions for four years now, and I give up pretending that the current system is working on our end.
    So, please, someone, in a dumbed down spelled out Idiots Guide for Dummy Tech Writers for RH8, step by excruciating step, how in the (world) do I maintain such links whenever I make a change in a child .chm? Based on earlier advice, our parent child is pretty much barebones and serves mostly as a shell with links to the children, where all the actual content is held. IE our parent rarely needs updating to its own content, usually once a year for the copyright notice we put on the main title page.

    Maintaining Manually Edited [MERGE FILES] section of your HHP files.
    Important: Although we’ve repeated this procedure successfully, it has not yet been fully put through the hoops by all our authors.  This is still in a test-bed cycle, and we are refining the procedure. This is only a suggestion for anyone who wants to try it.  You should absolutely back up your projects first. Any testing of this procedure must be on a copy. Please use these suggested steps at your own risk.
    Good luck!
    Karen
    Perform the following procedure for each help project in your RoboHelp V9 merged help system.
    1.       Delete the help project’s CPD file.
    2.       Using Notepad, remove the [MERGE FILES] section from the project’s HHP file.
    3.       Using Notepad, remove all <file> entries from the <mergedhelpfiles> section in the project’s XPJ.
    4.       Double-click the XPJ file to load the project into RoboHelp 9.
    5.       In the TOC pod, add all CHMs that are part of the merged help system, as follows:
    a.       Copy all CHMs—except the master (parent) project—into the project’s folder.
    b.      In RoboHelp, click the New Merged Project button.
    c.       In the Merged Project dialog box, select one of the CHM files, and make sure that its matching HHC file is also selected.
    d.      Repeat steps a through c for each CHM file you copied into the project.
    6.       Save the project, and generate the HTML help.
    7.       From the TOC pod, remove the CHMs you just added. (Do not remove the actual CHM files from the project’s folder.)
    8.       Save and generate the HTML help. The [MERGE FILES] section of your project’s HHP file should now contain only the names of the merged CHM files, not the hard-coded paths.

  • Unable to read email with mozilla firefox. The online graphics are missing and the links are unable to be accessed when I try to click on them

    Having issues with being able to assess my email on Mozilla Firefox. When I sign in, the graphics are missing. Once I'm logged in, the inbox is not there. Some thing is wrong graphically. There are work links for inbox and contacts, but they are all flushed to the left of the screen. When I attempt to click on them, nothing happens. I have tried to remove Firefox and then reinstall it but the same thing happens. I also attempted to reset firefox to its default state and that did not work either. I check plug ins and most are up to date. However, not clear for window presentation foundation is and if it was necessary to have. The plug in state was unknown. Please advise on what to do? Thanks!

    Make sure that you haven't enabled a High Contrast theme in the Windows/Mac Accessibility settings.
    Make sure that you allow pages to choose their own colors.
    *Tools > Options > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
    Note that these settings affect background images.
    See also:
    *http://kb.mozillazine.org/Website_colors_are_wrong
    You can try these steps in case of issues with web pages:
    You can reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
    *Hold down the Shift key and left-click the Reload button
    *Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    *Press "Command + Shift + R" (Mac)
    Clear the cache and remove cookies only from websites that cause problems.
    "Clear the Cache":
    *Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
    *Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
    *Do NOT click the Reset button on the Safe Mode start window
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • How are passwords and certificates encoded in .mobileconfig?

    The Enterprise Configuration Utility generates a human-readable XML file from which the iPhone can read and apply settings. However, the password and certificate portions of the file are encoded in such a way as to obfuscate them.
    Does anyone know the encoding algorithm? I need to know so that I can generate my own XML file with my own custom-built tool. The following statement in the Enterprise Deployment Guide suggests that Apple supports custom tools: “This appendix specifies the format of mobileconfig files for those who want to create their own tools.” But it doesn’t mention the encoding algorithm.

    Hi,
    I'm trying to find out how user passwords are stored in Discovererthey are not. the discoverer do not maintain the users or the password.
    the discoverer has 2 ways of connecting to the DB, none of them are users created by "discoverer" :
    1. using database users, so that the users and passwords are stored in the db (fnd_users)
    2. using apps mode, the discoverer users uses their oracle application connection string (user, responsibility).
    and here the oracle application maintain the users and responsibilities.
    Tamir

  • How are POs and Contracts are related?

    We are ABAP4 developers and pretty new at MM module.  We would be appreciated if some MM experts here can tell us the relationship between Contracts/RFQs and POs!
    Thanks and we will give you points!

    Check this link for more details
    http://help.sap.com/saphelp_erp2005/helpdata/en/75/ee0aaf55c811d189900000e8322d00/content.htm
    A purchasing document is an instrument used by Purchasing to procure materials or services.
    The following list shows the various external purchasing documents available in the standard SAP System. (Note: purchase requisitions are not included on this list because they are usually regarded as internal documents used within Purchasing and are therefore treated separately.)
    Request for quotation (RFQ)
    Transmits a requirement defined in a requisition for a material or service to potential vendors.
    Quotation
    Contains a vendor's prices and conditions and is the basis for vendor selection.
    Purchase order (PO)
    The buying entity’s request or instruction to a vendor (external supplier) to supply certain materials or render/perform certain services/works, formalizing a purchase transaction.
    Contract
    In the SAP Purchasing component, a type of "outline agreement", or longer-term buying arrangement. The contract is a binding commitment to procure a certain material or service from a vendor over a certain period of time.
    Scheduling agreement
    Another type of "outline agreement", or longer-term buying arrangement. Scheduling agreements provide for the creation of delivery schedules specifying purchase quantities, delivery dates, and possibly also precise times of delivery over a predefined period.

Maybe you are looking for